[Keyboard] Add suihankey_rev1 keyboard and Fix default keymap (#6419)
* move alpha * add suihankey rev1 * fix default keymap. * remove split * add split keymap * move default_split keymap * fix rev1 config.h * fix split * set BOOTMAGIC_ENABLE lite * fix enum basemaster
kakunpc
Drashna Jaelre
parent
c806103f41
commit
b28f1e6a29
|
|
@ -13,7 +13,7 @@
|
||||||
* You should have received a copy of the GNU General Public License
|
* You should have received a copy of the GNU General Public License
|
||||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
#include "suihankey.h"
|
#include "alpha.h"
|
||||||
|
|
||||||
// Optional override functions below.
|
// Optional override functions below.
|
||||||
// You can leave any or all of these undefined.
|
// You can leave any or all of these undefined.
|
||||||
|
|
@ -0,0 +1,39 @@
|
||||||
|
/* Copyright 2019 kakunpc
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "quantum.h"
|
||||||
|
|
||||||
|
/* This a shortcut to help you visually see your layout.
|
||||||
|
*
|
||||||
|
* The first section contains all of the arguments representing the physical
|
||||||
|
* layout of the board and position of the Leys.
|
||||||
|
*
|
||||||
|
* The second converts the arguments into a two-dimensional array which
|
||||||
|
* represents the switch matrix.
|
||||||
|
*/
|
||||||
|
#define LAYOUT( \
|
||||||
|
L00, L01, L02, L03, L04, \
|
||||||
|
L10, L11, L12, L13, L14, \
|
||||||
|
L20, L21, L22, L23, L24, \
|
||||||
|
L30, L31, L32 \
|
||||||
|
) \
|
||||||
|
{ \
|
||||||
|
{ L00, L01, L02, L03, L04 }, \
|
||||||
|
{ L10, L11, L12, L13, L14 }, \
|
||||||
|
{ L20, L21, L22, L23, L24 }, \
|
||||||
|
{ L30, L31, L32 }, \
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,248 @@
|
||||||
|
/*
|
||||||
|
Copyright 2019 kakunpc
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "config_common.h"
|
||||||
|
|
||||||
|
/* USB Device descriptor parameter */
|
||||||
|
#define VENDOR_ID 0xFEED
|
||||||
|
#define PRODUCT_ID 0x0000
|
||||||
|
#define DEVICE_VER 0x0001
|
||||||
|
#define MANUFACTURER kakunpc
|
||||||
|
#define PRODUCT Suihankey
|
||||||
|
#define DESCRIPTION A custom keyboard
|
||||||
|
|
||||||
|
/* key matrix size */
|
||||||
|
#define MATRIX_ROWS 4
|
||||||
|
#define MATRIX_COLS 5
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Keyboard Matrix Assignments
|
||||||
|
*
|
||||||
|
* Change this to how you wired your keyboard
|
||||||
|
* COLS: AVR pins used for columns, left to right
|
||||||
|
* ROWS: AVR pins used for rows, top to bottom
|
||||||
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||||
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#define MATRIX_ROW_PINS { F4, F5, F6, F7 }
|
||||||
|
#define MATRIX_COL_PINS { D4, C6, D7, E6, B4 }
|
||||||
|
#define UNUSED_PINS
|
||||||
|
// #define USE_I2C
|
||||||
|
// #undef USE_SERIAL
|
||||||
|
|
||||||
|
/* COL2ROW, ROW2COL*/
|
||||||
|
#define DIODE_DIRECTION COL2ROW
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
|
||||||
|
*/
|
||||||
|
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
|
||||||
|
#define SPLIT_HAND_PIN D2
|
||||||
|
|
||||||
|
// #define BACKLIGHT_PIN B7
|
||||||
|
// #define BACKLIGHT_BREATHING
|
||||||
|
// #define BACKLIGHT_LEVELS 3
|
||||||
|
|
||||||
|
#define RGB_DI_PIN D3
|
||||||
|
#ifdef RGB_DI_PIN
|
||||||
|
#define RGBLED_NUM 18
|
||||||
|
#define RGBLIGHT_HUE_STEP 8
|
||||||
|
#define RGBLIGHT_SAT_STEP 8
|
||||||
|
#define RGBLIGHT_VAL_STEP 8
|
||||||
|
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||||
|
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||||
|
// /*== all animations enable ==*/
|
||||||
|
#define RGBLIGHT_ANIMATIONS
|
||||||
|
// /*== or choose animations ==*/
|
||||||
|
// #define RGBLIGHT_EFFECT_BREATHING
|
||||||
|
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||||
|
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||||
|
// #define RGBLIGHT_EFFECT_SNAKE
|
||||||
|
// #define RGBLIGHT_EFFECT_KNIGHT
|
||||||
|
// #define RGBLIGHT_EFFECT_CHRISTMAS
|
||||||
|
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||||
|
// #define RGBLIGHT_EFFECT_RGB_TEST
|
||||||
|
// #define RGBLIGHT_EFFECT_ALTERNATING
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||||
|
#define DEBOUNCE 5
|
||||||
|
|
||||||
|
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||||
|
//#define MATRIX_HAS_GHOST
|
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||||
|
#define LOCKING_SUPPORT_ENABLE
|
||||||
|
/* Locking resynchronize hack */
|
||||||
|
#define LOCKING_RESYNC_ENABLE
|
||||||
|
|
||||||
|
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||||
|
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||||
|
*/
|
||||||
|
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Force NKRO
|
||||||
|
*
|
||||||
|
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||||
|
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||||
|
* makefile for this to work.)
|
||||||
|
*
|
||||||
|
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||||
|
* until the next keyboard reset.
|
||||||
|
*
|
||||||
|
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||||
|
* fully operational during normal computer usage.
|
||||||
|
*
|
||||||
|
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||||
|
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||||
|
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||||
|
* power-up.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
//#define FORCE_NKRO
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Magic Key Options
|
||||||
|
*
|
||||||
|
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||||
|
* the keyboard. They are best used in combination with the HID Listen program,
|
||||||
|
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||||
|
*
|
||||||
|
* The options below allow the magic key functionality to be changed. This is
|
||||||
|
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* key combination for magic key command */
|
||||||
|
/* defined by default; to change, uncomment and set to the combination you want */
|
||||||
|
// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
|
||||||
|
|
||||||
|
/* control how magic key switches layers */
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||||
|
|
||||||
|
/* override magic key keymap */
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||||
|
//#define MAGIC_KEY_HELP H
|
||||||
|
//#define MAGIC_KEY_HELP_ALT SLASH
|
||||||
|
//#define MAGIC_KEY_DEBUG D
|
||||||
|
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||||
|
//#define MAGIC_KEY_DEBUG_KBD K
|
||||||
|
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||||
|
//#define MAGIC_KEY_VERSION V
|
||||||
|
//#define MAGIC_KEY_STATUS S
|
||||||
|
//#define MAGIC_KEY_CONSOLE C
|
||||||
|
//#define MAGIC_KEY_LAYER0 0
|
||||||
|
//#define MAGIC_KEY_LAYER0_ALT GRAVE
|
||||||
|
//#define MAGIC_KEY_LAYER1 1
|
||||||
|
//#define MAGIC_KEY_LAYER2 2
|
||||||
|
//#define MAGIC_KEY_LAYER3 3
|
||||||
|
//#define MAGIC_KEY_LAYER4 4
|
||||||
|
//#define MAGIC_KEY_LAYER5 5
|
||||||
|
//#define MAGIC_KEY_LAYER6 6
|
||||||
|
//#define MAGIC_KEY_LAYER7 7
|
||||||
|
//#define MAGIC_KEY_LAYER8 8
|
||||||
|
//#define MAGIC_KEY_LAYER9 9
|
||||||
|
//#define MAGIC_KEY_BOOTLOADER B
|
||||||
|
//#define MAGIC_KEY_BOOTLOADER_ALT ESC
|
||||||
|
//#define MAGIC_KEY_LOCK CAPS
|
||||||
|
//#define MAGIC_KEY_EEPROM E
|
||||||
|
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
|
||||||
|
//#define MAGIC_KEY_NKRO N
|
||||||
|
//#define MAGIC_KEY_SLEEP_LED Z
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Feature disable options
|
||||||
|
* These options are also useful to firmware size reduction.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* disable debug print */
|
||||||
|
//#define NO_DEBUG
|
||||||
|
|
||||||
|
/* disable print */
|
||||||
|
//#define NO_PRINT
|
||||||
|
|
||||||
|
/* disable action features */
|
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
|
/*
|
||||||
|
* MIDI options
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Prevent use of disabled MIDI features in the keymap */
|
||||||
|
//#define MIDI_ENABLE_STRICT 1
|
||||||
|
|
||||||
|
/* enable basic MIDI features:
|
||||||
|
- MIDI notes can be sent when in Music mode is on
|
||||||
|
*/
|
||||||
|
//#define MIDI_BASIC
|
||||||
|
|
||||||
|
/* enable advanced MIDI features:
|
||||||
|
- MIDI notes can be added to the keymap
|
||||||
|
- Octave shift and transpose
|
||||||
|
- Virtual sustain, portamento, and modulation wheel
|
||||||
|
- etc.
|
||||||
|
*/
|
||||||
|
//#define MIDI_ADVANCED
|
||||||
|
|
||||||
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
|
/*
|
||||||
|
* HD44780 LCD Display Configuration
|
||||||
|
*/
|
||||||
|
/*
|
||||||
|
#define LCD_LINES 2 //< number of visible lines of the display
|
||||||
|
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
||||||
|
|
||||||
|
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
||||||
|
|
||||||
|
#if LCD_IO_MODE
|
||||||
|
#define LCD_PORT PORTB //< port for the LCD lines
|
||||||
|
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
||||||
|
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
||||||
|
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
||||||
|
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
||||||
|
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
||||||
|
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
||||||
|
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
||||||
|
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
||||||
|
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
||||||
|
#define LCD_RS_PIN 3 //< pin for RS line
|
||||||
|
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
||||||
|
#define LCD_RW_PIN 2 //< pin for RW line
|
||||||
|
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
||||||
|
#define LCD_E_PIN 1 //< pin for Enable line
|
||||||
|
#endif
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Bootmagic Lite key configuration */
|
||||||
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
|
||||||
|
// #define RGBLED_SPLIT {18,18}
|
||||||
|
|
@ -0,0 +1,100 @@
|
||||||
|
/* Copyright 2019 kakunpc
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#include QMK_KEYBOARD_H
|
||||||
|
|
||||||
|
enum layers{
|
||||||
|
BASE,
|
||||||
|
COMMAND,
|
||||||
|
NUMBER,
|
||||||
|
FUNCTION
|
||||||
|
};
|
||||||
|
|
||||||
|
#define KC_CMD_SP LT(COMMAND,KC_SPC)
|
||||||
|
#define KC_CMD_ET LT(COMMAND,KC_ENTER)
|
||||||
|
#define KC_NUM_ALT LT(NUMBER,KC_LALT)
|
||||||
|
#define KC_NUM_BS LT(NUMBER,KC_BSPC)
|
||||||
|
#define KC_SET_CTRL LT(FUNCTION,KC_LCTRL)
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
[BASE] = LAYOUT( /* Base */
|
||||||
|
KC_Q, KC_W, KC_E, KC_R, KC_T,
|
||||||
|
KC_A, KC_S, KC_D, KC_F, KC_G,
|
||||||
|
KC_Z, KC_X, KC_C, KC_V, KC_B,
|
||||||
|
KC_SET_CTRL, KC_NUM_ALT, KC_CMD_SP
|
||||||
|
),
|
||||||
|
[COMMAND] = LAYOUT( /* Base */
|
||||||
|
KC_Q, KC_W, KC_E, KC_R, KC_T,
|
||||||
|
KC_A, KC_S, KC_D, KC_F, KC_G,
|
||||||
|
LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), LCTL(KC_B),
|
||||||
|
KC_NO, KC_NO, KC_NO
|
||||||
|
),
|
||||||
|
[NUMBER] = LAYOUT( /* Base */
|
||||||
|
KC_1, KC_2, KC_3, KC_4, KC_5,
|
||||||
|
KC_6, KC_7, KC_8, KC_9, KC_0,
|
||||||
|
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||||
|
KC_NO, KC_NO, KC_NO
|
||||||
|
),
|
||||||
|
[FUNCTION] = LAYOUT( /* Base */
|
||||||
|
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5,
|
||||||
|
KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,
|
||||||
|
KC_F11, KC_F12, RGB_TOG, RGB_MOD, RGB_RMOD,
|
||||||
|
KC_NO, KC_NO, KC_NO
|
||||||
|
),
|
||||||
|
};
|
||||||
|
|
||||||
|
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
void led_set_user(uint8_t usb_led) {
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef OLED_DRIVER_ENABLE
|
||||||
|
void oled_task_user(void) {
|
||||||
|
oled_write_P(PSTR("Layer: "), false);
|
||||||
|
switch (biton32(layer_state)) {
|
||||||
|
case BASE:
|
||||||
|
oled_write_P(PSTR("Default\n"), false);
|
||||||
|
break;
|
||||||
|
case COMMAND:
|
||||||
|
oled_write_P(PSTR("COMMAND\n"), false);
|
||||||
|
break;
|
||||||
|
case NUMBER:
|
||||||
|
oled_write_P(PSTR("NUMBER\n"), false);
|
||||||
|
break;
|
||||||
|
case FUNCTION:
|
||||||
|
oled_write_P(PSTR("FUNCTION\n"), false);
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
// Or use the write_ln shortcut over adding 'n' to the end of your string
|
||||||
|
oled_write_ln_P(PSTR("Undefined"), false);
|
||||||
|
}
|
||||||
|
|
||||||
|
// Host Keyboard LED Status
|
||||||
|
oled_write_P(IS_HOST_LED_ON(USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR(" "), false);
|
||||||
|
oled_write_P(IS_HOST_LED_ON(USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR(" "), false);
|
||||||
|
oled_write_P(IS_HOST_LED_ON(USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR(" "), false);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1,18 @@
|
||||||
|
# suihankey_alpha
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
Compact with only 18 keys is a concept keyboard.
|
||||||
|
Supports OLED and RGBLED (optional)
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
Keyboard Maintainer: [kakunpc](https://github.com/kakunpc)
|
||||||
|
Hardware Supported: suihankey_alpha, promicro
|
||||||
|
Hardware Availability: booth([@kakunpc](https://kakunpc.booth.pm/))
|
||||||
|
|
||||||
|
Make example for this keyboard (after setting up your build environment):
|
||||||
|
|
||||||
|
make suihankey/alpha:default
|
||||||
|
|
||||||
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||||
|
|
@ -0,0 +1,82 @@
|
||||||
|
# MCU name
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Bootloader selection
|
||||||
|
# Teensy halfkay
|
||||||
|
# Pro Micro caterina
|
||||||
|
# Atmel DFU atmel-dfu
|
||||||
|
# LUFA DFU lufa-dfu
|
||||||
|
# QMK DFU qmk-dfu
|
||||||
|
# atmega32a bootloadHID
|
||||||
|
BOOTLOADER = atmel-dfu
|
||||||
|
|
||||||
|
|
||||||
|
# If you don't know the bootloader type, then you can specify the
|
||||||
|
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
|
||||||
|
# Teensy halfKay 512
|
||||||
|
# Teensy++ halfKay 1024
|
||||||
|
# Atmel DFU loader 4096
|
||||||
|
# LUFA bootloader 4096
|
||||||
|
# USBaspLoader 2048
|
||||||
|
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# change yes to no to disable
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
|
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||||
|
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
||||||
|
UNICODE_ENABLE = no # Unicode
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
||||||
|
OLED_DRIVER_ENABLE = yes
|
||||||
|
SPLIT_KEYBOARD = no
|
||||||
|
|
@ -6,7 +6,7 @@
|
||||||
"height": 4,
|
"height": 4,
|
||||||
"layouts": {
|
"layouts": {
|
||||||
"LAYOUT": {
|
"LAYOUT": {
|
||||||
"layout": [{"label":"1", "x":0, "y":0}, {"label":"2", "x":1, "y":0}, {"label":"3", "x":2, "y":0}, {"label":"4", "x":3, "y":0}, {"label":"5", "x":4, "y":0}, {"label":"19", "x":7, "y":0}, {"label":"20", "x":8, "y":0}, {"label":"21", "x":9, "y":0}, {"label":"22", "x":10, "y":0}, {"label":"23", "x":11, "y":0}, {"label":"6", "x":0, "y":1}, {"label":"7", "x":1, "y":1}, {"label":"8", "x":2, "y":1}, {"label":"9", "x":3, "y":1}, {"label":"10", "x":4, "y":1}, {"label":"24", "x":7, "y":1}, {"label":"25", "x":8, "y":1}, {"label":"26", "x":9, "y":1}, {"label":"27", "x":10, "y":1}, {"label":"28", "x":11, "y":1}, {"label":"11", "x":0, "y":2}, {"label":"12", "x":1, "y":2}, {"label":"13", "x":2, "y":2}, {"label":"14", "x":3, "y":2}, {"label":"15", "x":4, "y":2}, {"label":"29", "x":7, "y":2}, {"label":"30", "x":8, "y":2}, {"label":"31", "x":9, "y":2}, {"label":"32", "x":10, "y":2}, {"label":"33", "x":11, "y":2}, {"label":"16", "x":2, "y":3}, {"label":"17", "x":3, "y":3}, {"label":"18", "x":4, "y":3}, {"label":"34", "x":7, "y":3}, {"label":"35", "x":8, "y":3}, {"label":"36", "x":9, "y":3}]
|
"layout": [{"label":"3", "x":3.5, "y":0}, {"label":"2", "x":2.5, "y":0.125}, {"label":"4", "x":4.5, "y":0.125}, {"label":"5", "x":5.5, "y":0.25}, {"label":"1", "x":1.5, "y":0.375}, {"label":"8", "x":3.5, "y":1}, {"label":"7", "x":2.5, "y":1.125}, {"label":"9", "x":4.5, "y":1.125}, {"label":"10", "x":5.5, "y":1.25}, {"label":"6", "x":1.5, "y":1.375}, {"label":"13", "x":3.5, "y":2}, {"label":"12", "x":2.5, "y":2.125}, {"label":"14", "x":4.5, "y":2.125}, {"label":"15", "x":5.5, "y":2.25}, {"label":"11", "x":1.5, "y":2.375}, {"label":"16", "x":-1.75, "y":3.125}, {"label":"17", "x":-0.75, "y":3.125}, {"label":"18", "x":0.25, "y":3.125}]
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
}
|
}
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,248 @@
|
||||||
|
/*
|
||||||
|
Copyright 2019 kakunpc
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "config_common.h"
|
||||||
|
|
||||||
|
/* USB Device descriptor parameter */
|
||||||
|
#define VENDOR_ID 0xFEED
|
||||||
|
#define PRODUCT_ID 0x0000
|
||||||
|
#define DEVICE_VER 0x0001
|
||||||
|
#define MANUFACTURER kakunpc
|
||||||
|
#define PRODUCT Suihankey
|
||||||
|
#define DESCRIPTION A custom keyboard
|
||||||
|
|
||||||
|
/* key matrix size */
|
||||||
|
#define MATRIX_ROWS 5
|
||||||
|
#define MATRIX_COLS 4
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Keyboard Matrix Assignments
|
||||||
|
*
|
||||||
|
* Change this to how you wired your keyboard
|
||||||
|
* COLS: AVR pins used for columns, left to right
|
||||||
|
* ROWS: AVR pins used for rows, top to bottom
|
||||||
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||||
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
|
||||||
|
#define MATRIX_COL_PINS { F4, F5, F6, F7 }
|
||||||
|
#define UNUSED_PINS
|
||||||
|
//#define USE_I2C
|
||||||
|
//#undef USE_SERIAL
|
||||||
|
|
||||||
|
/* COL2ROW, ROW2COL*/
|
||||||
|
#define DIODE_DIRECTION COL2ROW
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
|
||||||
|
*/
|
||||||
|
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
|
||||||
|
#define SPLIT_HAND_PIN D2
|
||||||
|
|
||||||
|
// #define BACKLIGHT_PIN B7
|
||||||
|
// #define BACKLIGHT_BREATHING
|
||||||
|
// #define BACKLIGHT_LEVELS 3
|
||||||
|
|
||||||
|
#define RGB_DI_PIN D3
|
||||||
|
#ifdef RGB_DI_PIN
|
||||||
|
#define RGBLED_NUM 18
|
||||||
|
#define RGBLIGHT_HUE_STEP 8
|
||||||
|
#define RGBLIGHT_SAT_STEP 8
|
||||||
|
#define RGBLIGHT_VAL_STEP 8
|
||||||
|
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||||
|
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||||
|
// /*== all animations enable ==*/
|
||||||
|
#define RGBLIGHT_ANIMATIONS
|
||||||
|
// /*== or choose animations ==*/
|
||||||
|
// #define RGBLIGHT_EFFECT_BREATHING
|
||||||
|
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||||
|
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||||
|
// #define RGBLIGHT_EFFECT_SNAKE
|
||||||
|
// #define RGBLIGHT_EFFECT_KNIGHT
|
||||||
|
// #define RGBLIGHT_EFFECT_CHRISTMAS
|
||||||
|
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||||
|
// #define RGBLIGHT_EFFECT_RGB_TEST
|
||||||
|
// #define RGBLIGHT_EFFECT_ALTERNATING
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||||
|
#define DEBOUNCE 5
|
||||||
|
|
||||||
|
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||||
|
//#define MATRIX_HAS_GHOST
|
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||||
|
#define LOCKING_SUPPORT_ENABLE
|
||||||
|
/* Locking resynchronize hack */
|
||||||
|
#define LOCKING_RESYNC_ENABLE
|
||||||
|
|
||||||
|
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||||
|
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||||
|
*/
|
||||||
|
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Force NKRO
|
||||||
|
*
|
||||||
|
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||||
|
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||||
|
* makefile for this to work.)
|
||||||
|
*
|
||||||
|
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||||
|
* until the next keyboard reset.
|
||||||
|
*
|
||||||
|
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||||
|
* fully operational during normal computer usage.
|
||||||
|
*
|
||||||
|
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||||
|
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||||
|
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||||
|
* power-up.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
//#define FORCE_NKRO
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Magic Key Options
|
||||||
|
*
|
||||||
|
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||||
|
* the keyboard. They are best used in combination with the HID Listen program,
|
||||||
|
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||||
|
*
|
||||||
|
* The options below allow the magic key functionality to be changed. This is
|
||||||
|
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* key combination for magic key command */
|
||||||
|
/* defined by default; to change, uncomment and set to the combination you want */
|
||||||
|
// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
|
||||||
|
|
||||||
|
/* control how magic key switches layers */
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||||
|
|
||||||
|
/* override magic key keymap */
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||||
|
//#define MAGIC_KEY_HELP H
|
||||||
|
//#define MAGIC_KEY_HELP_ALT SLASH
|
||||||
|
//#define MAGIC_KEY_DEBUG D
|
||||||
|
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||||
|
//#define MAGIC_KEY_DEBUG_KBD K
|
||||||
|
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||||
|
//#define MAGIC_KEY_VERSION V
|
||||||
|
//#define MAGIC_KEY_STATUS S
|
||||||
|
//#define MAGIC_KEY_CONSOLE C
|
||||||
|
//#define MAGIC_KEY_LAYER0 0
|
||||||
|
//#define MAGIC_KEY_LAYER0_ALT GRAVE
|
||||||
|
//#define MAGIC_KEY_LAYER1 1
|
||||||
|
//#define MAGIC_KEY_LAYER2 2
|
||||||
|
//#define MAGIC_KEY_LAYER3 3
|
||||||
|
//#define MAGIC_KEY_LAYER4 4
|
||||||
|
//#define MAGIC_KEY_LAYER5 5
|
||||||
|
//#define MAGIC_KEY_LAYER6 6
|
||||||
|
//#define MAGIC_KEY_LAYER7 7
|
||||||
|
//#define MAGIC_KEY_LAYER8 8
|
||||||
|
//#define MAGIC_KEY_LAYER9 9
|
||||||
|
//#define MAGIC_KEY_BOOTLOADER B
|
||||||
|
//#define MAGIC_KEY_BOOTLOADER_ALT ESC
|
||||||
|
//#define MAGIC_KEY_LOCK CAPS
|
||||||
|
//#define MAGIC_KEY_EEPROM E
|
||||||
|
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
|
||||||
|
//#define MAGIC_KEY_NKRO N
|
||||||
|
//#define MAGIC_KEY_SLEEP_LED Z
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Feature disable options
|
||||||
|
* These options are also useful to firmware size reduction.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* disable debug print */
|
||||||
|
//#define NO_DEBUG
|
||||||
|
|
||||||
|
/* disable print */
|
||||||
|
//#define NO_PRINT
|
||||||
|
|
||||||
|
/* disable action features */
|
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
|
/*
|
||||||
|
* MIDI options
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Prevent use of disabled MIDI features in the keymap */
|
||||||
|
//#define MIDI_ENABLE_STRICT 1
|
||||||
|
|
||||||
|
/* enable basic MIDI features:
|
||||||
|
- MIDI notes can be sent when in Music mode is on
|
||||||
|
*/
|
||||||
|
//#define MIDI_BASIC
|
||||||
|
|
||||||
|
/* enable advanced MIDI features:
|
||||||
|
- MIDI notes can be added to the keymap
|
||||||
|
- Octave shift and transpose
|
||||||
|
- Virtual sustain, portamento, and modulation wheel
|
||||||
|
- etc.
|
||||||
|
*/
|
||||||
|
//#define MIDI_ADVANCED
|
||||||
|
|
||||||
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
|
/*
|
||||||
|
* HD44780 LCD Display Configuration
|
||||||
|
*/
|
||||||
|
/*
|
||||||
|
#define LCD_LINES 2 //< number of visible lines of the display
|
||||||
|
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
||||||
|
|
||||||
|
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
||||||
|
|
||||||
|
#if LCD_IO_MODE
|
||||||
|
#define LCD_PORT PORTB //< port for the LCD lines
|
||||||
|
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
||||||
|
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
||||||
|
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
||||||
|
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
||||||
|
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
||||||
|
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
||||||
|
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
||||||
|
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
||||||
|
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
||||||
|
#define LCD_RS_PIN 3 //< pin for RS line
|
||||||
|
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
||||||
|
#define LCD_RW_PIN 2 //< pin for RW line
|
||||||
|
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
||||||
|
#define LCD_E_PIN 1 //< pin for Enable line
|
||||||
|
#endif
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Bootmagic Lite key configuration */
|
||||||
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
|
||||||
|
// #define RGBLED_SPLIT {18,18}
|
||||||
|
|
@ -0,0 +1,19 @@
|
||||||
|
/* Copyright 2019 kakunpc
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
// place overrides here
|
||||||
|
|
@ -0,0 +1,100 @@
|
||||||
|
/* Copyright 2019 kakunpc
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#include QMK_KEYBOARD_H
|
||||||
|
|
||||||
|
enum layers{
|
||||||
|
BASE,
|
||||||
|
COMMAND,
|
||||||
|
NUMBER,
|
||||||
|
FUNCTION
|
||||||
|
};
|
||||||
|
|
||||||
|
#define KC_CMD_SP LT(COMMAND,KC_SPC)
|
||||||
|
#define KC_CMD_ET LT(COMMAND,KC_ENTER)
|
||||||
|
#define KC_NUM_ALT LT(NUMBER,KC_LALT)
|
||||||
|
#define KC_NUM_BS LT(NUMBER,KC_BSPC)
|
||||||
|
#define KC_SET_CTRL LT(FUNCTION,KC_LCTRL)
|
||||||
|
|
||||||
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
|
[BASE] = LAYOUT( /* Base */
|
||||||
|
KC_Q, KC_W, KC_E, KC_R, KC_T,
|
||||||
|
KC_A, KC_S, KC_D, KC_F, KC_G,
|
||||||
|
KC_Z, KC_X, KC_C, KC_V, KC_B,
|
||||||
|
KC_SET_CTRL, KC_NUM_ALT, KC_CMD_SP
|
||||||
|
),
|
||||||
|
[COMMAND] = LAYOUT( /* Base */
|
||||||
|
KC_Q, KC_W, KC_E, KC_R, KC_T,
|
||||||
|
KC_A, KC_S, KC_D, KC_F, KC_G,
|
||||||
|
LCTL(KC_Z), LCTL(KC_X), LCTL(KC_C), LCTL(KC_V), LCTL(KC_B),
|
||||||
|
KC_NO, KC_NO, KC_NO
|
||||||
|
),
|
||||||
|
[NUMBER] = LAYOUT( /* Base */
|
||||||
|
KC_1, KC_2, KC_3, KC_4, KC_5,
|
||||||
|
KC_6, KC_7, KC_8, KC_9, KC_0,
|
||||||
|
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||||
|
KC_NO, KC_NO, KC_NO
|
||||||
|
),
|
||||||
|
[FUNCTION] = LAYOUT( /* Base */
|
||||||
|
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5,
|
||||||
|
KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,
|
||||||
|
KC_F11, KC_F12, RGB_TOG, RGB_MOD, RGB_RMOD,
|
||||||
|
KC_NO, KC_NO, KC_NO
|
||||||
|
),
|
||||||
|
};
|
||||||
|
|
||||||
|
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_init_user(void) {
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_scan_user(void) {
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
void led_set_user(uint8_t usb_led) {
|
||||||
|
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef OLED_DRIVER_ENABLE
|
||||||
|
void oled_task_user(void) {
|
||||||
|
oled_write_P(PSTR("Layer: "), false);
|
||||||
|
switch (biton32(layer_state)) {
|
||||||
|
case BASE:
|
||||||
|
oled_write_P(PSTR("Default\n"), false);
|
||||||
|
break;
|
||||||
|
case COMMAND:
|
||||||
|
oled_write_P(PSTR("COMMAND\n"), false);
|
||||||
|
break;
|
||||||
|
case NUMBER:
|
||||||
|
oled_write_P(PSTR("NUMBER\n"), false);
|
||||||
|
break;
|
||||||
|
case FUNCTION:
|
||||||
|
oled_write_P(PSTR("FUNCTION\n"), false);
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
// Or use the write_ln shortcut over adding 'n' to the end of your string
|
||||||
|
oled_write_ln_P(PSTR("Undefined"), false);
|
||||||
|
}
|
||||||
|
|
||||||
|
// Host Keyboard LED Status
|
||||||
|
oled_write_P(IS_HOST_LED_ON(USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR(" "), false);
|
||||||
|
oled_write_P(IS_HOST_LED_ON(USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR(" "), false);
|
||||||
|
oled_write_P(IS_HOST_LED_ON(USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR(" "), false);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
@ -0,0 +1 @@
|
||||||
|
# The default keymap for suihankey
|
||||||
|
|
@ -0,0 +1,18 @@
|
||||||
|
# suihankey_rev1
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
Compact with only 18 keys is a concept keyboard.
|
||||||
|
Supports OLED and RGBLED (optional)
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
Keyboard Maintainer: [kakunpc](https://github.com/kakunpc)
|
||||||
|
Hardware Supported: suihankey_rev1, promicro
|
||||||
|
Hardware Availability: booth([@kakunpc](https://kakunpc.booth.pm/))
|
||||||
|
|
||||||
|
Make example for this keyboard (after setting up your build environment):
|
||||||
|
|
||||||
|
make suihankey/rev1:default
|
||||||
|
|
||||||
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||||
|
|
@ -0,0 +1,51 @@
|
||||||
|
/* Copyright 2019 kakunpc
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#include "rev1.h"
|
||||||
|
|
||||||
|
// Optional override functions below.
|
||||||
|
// You can leave any or all of these undefined.
|
||||||
|
// These are only required if you want to perform custom actions.
|
||||||
|
|
||||||
|
/*
|
||||||
|
|
||||||
|
void matrix_init_kb(void) {
|
||||||
|
// put your keyboard start-up code here
|
||||||
|
// runs once when the firmware starts up
|
||||||
|
|
||||||
|
matrix_init_user();
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_scan_kb(void) {
|
||||||
|
// put your looping keyboard code here
|
||||||
|
// runs every cycle (a lot)
|
||||||
|
|
||||||
|
matrix_scan_user();
|
||||||
|
}
|
||||||
|
|
||||||
|
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||||
|
// put your per-action keyboard code here
|
||||||
|
// runs for every action, just before processing by the firmware
|
||||||
|
|
||||||
|
return process_record_user(keycode, record);
|
||||||
|
}
|
||||||
|
|
||||||
|
void led_set_kb(uint8_t usb_led) {
|
||||||
|
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||||
|
|
||||||
|
led_set_user(usb_led);
|
||||||
|
}
|
||||||
|
|
||||||
|
*/
|
||||||
|
|
@ -0,0 +1,40 @@
|
||||||
|
/* Copyright 2019 kakunpc
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "quantum.h"
|
||||||
|
|
||||||
|
/* This a shortcut to help you visually see your layout.
|
||||||
|
*
|
||||||
|
* The first section contains all of the arguments representing the physical
|
||||||
|
* layout of the board and position of the Leys.
|
||||||
|
*
|
||||||
|
* The second converts the arguments into a two-dimensional array which
|
||||||
|
* represents the switch matrix.
|
||||||
|
*/
|
||||||
|
#define LAYOUT( \
|
||||||
|
L00, L01, L02, L03, L04, \
|
||||||
|
L10, L11, L12, L13, L14, \
|
||||||
|
L20, L21, L22, L23, L24, \
|
||||||
|
L30, L31, L32 \
|
||||||
|
) \
|
||||||
|
{ \
|
||||||
|
{ L00, L10, L20, L30 }, \
|
||||||
|
{ L01, L11, L21, L31 }, \
|
||||||
|
{ L02, L12, L22, L32 }, \
|
||||||
|
{ L03, L13, L23, KC_NO }, \
|
||||||
|
{ L04, L14, L24, KC_NO }, \
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,82 @@
|
||||||
|
# MCU name
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Bootloader selection
|
||||||
|
# Teensy halfkay
|
||||||
|
# Pro Micro caterina
|
||||||
|
# Atmel DFU atmel-dfu
|
||||||
|
# LUFA DFU lufa-dfu
|
||||||
|
# QMK DFU qmk-dfu
|
||||||
|
# atmega32a bootloadHID
|
||||||
|
BOOTLOADER = atmel-dfu
|
||||||
|
|
||||||
|
|
||||||
|
# If you don't know the bootloader type, then you can specify the
|
||||||
|
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
|
||||||
|
# Teensy halfKay 512
|
||||||
|
# Teensy++ halfKay 1024
|
||||||
|
# Atmel DFU loader 4096
|
||||||
|
# LUFA bootloader 4096
|
||||||
|
# USBaspLoader 2048
|
||||||
|
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# change yes to no to disable
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
|
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||||
|
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
||||||
|
UNICODE_ENABLE = no # Unicode
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
||||||
|
OLED_DRIVER_ENABLE = yes
|
||||||
|
SPLIT_KEYBOARD = no
|
||||||
|
|
@ -61,7 +61,7 @@ BOOTLOADER = atmel-dfu
|
||||||
# Build Options
|
# Build Options
|
||||||
# change yes to no to disable
|
# change yes to no to disable
|
||||||
#
|
#
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||||
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
|
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||||
|
|
@ -78,5 +78,7 @@ BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
||||||
OLED_DRIVER_ENABLE = no
|
OLED_DRIVER_ENABLE = yes
|
||||||
SPLIT_KEYBOARD = yes
|
SPLIT_KEYBOARD = no
|
||||||
|
|
||||||
|
DEFAULT_FOLDER = suihankey/rev1
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,51 @@
|
||||||
|
/* Copyright 2019 kakunpc
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#include "alpha.h"
|
||||||
|
|
||||||
|
// Optional override functions below.
|
||||||
|
// You can leave any or all of these undefined.
|
||||||
|
// These are only required if you want to perform custom actions.
|
||||||
|
|
||||||
|
/*
|
||||||
|
|
||||||
|
void matrix_init_kb(void) {
|
||||||
|
// put your keyboard start-up code here
|
||||||
|
// runs once when the firmware starts up
|
||||||
|
|
||||||
|
matrix_init_user();
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_scan_kb(void) {
|
||||||
|
// put your looping keyboard code here
|
||||||
|
// runs every cycle (a lot)
|
||||||
|
|
||||||
|
matrix_scan_user();
|
||||||
|
}
|
||||||
|
|
||||||
|
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||||
|
// put your per-action keyboard code here
|
||||||
|
// runs for every action, just before processing by the firmware
|
||||||
|
|
||||||
|
return process_record_user(keycode, record);
|
||||||
|
}
|
||||||
|
|
||||||
|
void led_set_kb(uint8_t usb_led) {
|
||||||
|
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||||
|
|
||||||
|
led_set_user(usb_led);
|
||||||
|
}
|
||||||
|
|
||||||
|
*/
|
||||||
|
|
@ -41,3 +41,4 @@
|
||||||
{ R20, R21, R22, R23, R24 }, \
|
{ R20, R21, R22, R23, R24 }, \
|
||||||
{ R30, R31, R32 }, \
|
{ R30, R31, R32 }, \
|
||||||
}
|
}
|
||||||
|
|
||||||
|
|
@ -0,0 +1,18 @@
|
||||||
|
# suihankey_alpha
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
Compact with only 36 keys is a concept keyboard.
|
||||||
|
Supports OLED and RGBLED (optional)
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
Keyboard Maintainer: [kakunpc](https://github.com/kakunpc)
|
||||||
|
Hardware Supported: suihankey_alphaboard_alpha, promicro
|
||||||
|
Hardware Availability: booth([@kakunpc](https://kakunpc.booth.pm/))
|
||||||
|
|
||||||
|
Make example for this keyboard (after setting up your build environment):
|
||||||
|
|
||||||
|
make suihankey/alpha:default
|
||||||
|
|
||||||
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||||
|
|
@ -0,0 +1,82 @@
|
||||||
|
# MCU name
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Bootloader selection
|
||||||
|
# Teensy halfkay
|
||||||
|
# Pro Micro caterina
|
||||||
|
# Atmel DFU atmel-dfu
|
||||||
|
# LUFA DFU lufa-dfu
|
||||||
|
# QMK DFU qmk-dfu
|
||||||
|
# atmega32a bootloadHID
|
||||||
|
BOOTLOADER = atmel-dfu
|
||||||
|
|
||||||
|
|
||||||
|
# If you don't know the bootloader type, then you can specify the
|
||||||
|
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
|
||||||
|
# Teensy halfKay 512
|
||||||
|
# Teensy++ halfKay 1024
|
||||||
|
# Atmel DFU loader 4096
|
||||||
|
# LUFA bootloader 4096
|
||||||
|
# USBaspLoader 2048
|
||||||
|
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# change yes to no to disable
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
|
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||||
|
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
||||||
|
UNICODE_ENABLE = no # Unicode
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
||||||
|
OLED_DRIVER_ENABLE = no
|
||||||
|
SPLIT_KEYBOARD = yes
|
||||||
|
|
@ -0,0 +1,12 @@
|
||||||
|
{
|
||||||
|
"keyboard_name": "suihankey_split",
|
||||||
|
"url": "https://kakunpc.booth.pm/",
|
||||||
|
"maintainer": "kakunpc",
|
||||||
|
"width": 12,
|
||||||
|
"height": 4,
|
||||||
|
"layouts": {
|
||||||
|
"LAYOUT": {
|
||||||
|
"layout": [{"label":"1", "x":0, "y":0}, {"label":"2", "x":1, "y":0}, {"label":"3", "x":2, "y":0}, {"label":"4", "x":3, "y":0}, {"label":"5", "x":4, "y":0}, {"label":"19", "x":7, "y":0}, {"label":"20", "x":8, "y":0}, {"label":"21", "x":9, "y":0}, {"label":"22", "x":10, "y":0}, {"label":"23", "x":11, "y":0}, {"label":"6", "x":0, "y":1}, {"label":"7", "x":1, "y":1}, {"label":"8", "x":2, "y":1}, {"label":"9", "x":3, "y":1}, {"label":"10", "x":4, "y":1}, {"label":"24", "x":7, "y":1}, {"label":"25", "x":8, "y":1}, {"label":"26", "x":9, "y":1}, {"label":"27", "x":10, "y":1}, {"label":"28", "x":11, "y":1}, {"label":"11", "x":0, "y":2}, {"label":"12", "x":1, "y":2}, {"label":"13", "x":2, "y":2}, {"label":"14", "x":3, "y":2}, {"label":"15", "x":4, "y":2}, {"label":"29", "x":7, "y":2}, {"label":"30", "x":8, "y":2}, {"label":"31", "x":9, "y":2}, {"label":"32", "x":10, "y":2}, {"label":"33", "x":11, "y":2}, {"label":"16", "x":2, "y":3}, {"label":"17", "x":3, "y":3}, {"label":"18", "x":4, "y":3}, {"label":"34", "x":7, "y":3}, {"label":"35", "x":8, "y":3}, {"label":"36", "x":9, "y":3}]
|
||||||
|
}
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,19 @@
|
||||||
|
/* Copyright 2019 kakunpc
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
// place overrides here
|
||||||
|
|
@ -16,7 +16,7 @@
|
||||||
#include QMK_KEYBOARD_H
|
#include QMK_KEYBOARD_H
|
||||||
|
|
||||||
enum layers{
|
enum layers{
|
||||||
BASE = 0,
|
BASE,
|
||||||
COMMAND,
|
COMMAND,
|
||||||
NUMBER,
|
NUMBER,
|
||||||
SETTING
|
SETTING
|
||||||
|
|
@ -50,7 +50,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
[SETTING] = LAYOUT( /* Base */
|
[SETTING] = LAYOUT( /* Base */
|
||||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
KC_NO, KC_NO, KC_NO, KC_NO, RGB_MOD, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO,
|
||||||
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO
|
KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO
|
||||||
),
|
),
|
||||||
};
|
};
|
||||||
|
|
@ -70,31 +70,3 @@ void matrix_scan_user(void) {
|
||||||
void led_set_user(uint8_t usb_led) {
|
void led_set_user(uint8_t usb_led) {
|
||||||
|
|
||||||
}
|
}
|
||||||
|
|
||||||
#ifdef OLED_DRIVER_ENABLE
|
|
||||||
void oled_task_user(void) {
|
|
||||||
oled_write_P(PSTR("Layer: "), false);
|
|
||||||
switch (biton32(layer_state)) {
|
|
||||||
case BASE:
|
|
||||||
oled_write_P(PSTR("Defaultn"), false);
|
|
||||||
break;
|
|
||||||
case COMMAND:
|
|
||||||
oled_write_P(PSTR("COMMANDn"), false);
|
|
||||||
break;
|
|
||||||
case NUMBER:
|
|
||||||
oled_write_P(PSTR("NUMBERn"), false);
|
|
||||||
break;
|
|
||||||
case SETTING:
|
|
||||||
oled_write_P(PSTR("SETTINGn"), false);
|
|
||||||
break;
|
|
||||||
default:
|
|
||||||
// Or use the write_ln shortcut over adding 'n' to the end of your string
|
|
||||||
oled_write_ln_P(PSTR("Undefined"), false);
|
|
||||||
}
|
|
||||||
|
|
||||||
// Host Keyboard LED Status
|
|
||||||
oled_write_P(IS_HOST_LED_ON(USB_LED_NUM_LOCK) ? PSTR("NUMLCK ") : PSTR(" "), false);
|
|
||||||
oled_write_P(IS_HOST_LED_ON(USB_LED_CAPS_LOCK) ? PSTR("CAPLCK ") : PSTR(" "), false);
|
|
||||||
oled_write_P(IS_HOST_LED_ON(USB_LED_SCROLL_LOCK) ? PSTR("SCRLCK ") : PSTR(" "), false);
|
|
||||||
}
|
|
||||||
#endif
|
|
||||||
|
|
@ -0,0 +1 @@
|
||||||
|
# The default split keymap for suihankey
|
||||||
|
|
@ -0,0 +1,18 @@
|
||||||
|
# suihankey split
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
Compact with only 36 keys is a concept keyboard.
|
||||||
|
Supports OLED and RGBLED (optional)
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
Keyboard Maintainer: [kakunpc](https://github.com/kakunpc)
|
||||||
|
Hardware Supported: suihankeyboard_alpha, promicro
|
||||||
|
Hardware Availability: booth([@kakunpc](https://kakunpc.booth.pm/))
|
||||||
|
|
||||||
|
Make example for this keyboard (after setting up your build environment):
|
||||||
|
|
||||||
|
make suihankey/split:default
|
||||||
|
|
||||||
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||||
|
|
@ -0,0 +1,248 @@
|
||||||
|
/*
|
||||||
|
Copyright 2019 kakunpc
|
||||||
|
|
||||||
|
This program is free software: you can redistribute it and/or modify
|
||||||
|
it under the terms of the GNU General Public License as published by
|
||||||
|
the Free Software Foundation, either version 2 of the License, or
|
||||||
|
(at your option) any later version.
|
||||||
|
|
||||||
|
This program is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
GNU General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU General Public License
|
||||||
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "config_common.h"
|
||||||
|
|
||||||
|
/* USB Device descriptor parameter */
|
||||||
|
#define VENDOR_ID 0xFEED
|
||||||
|
#define PRODUCT_ID 0x0000
|
||||||
|
#define DEVICE_VER 0x0001
|
||||||
|
#define MANUFACTURER kakunpc
|
||||||
|
#define PRODUCT Suihankey
|
||||||
|
#define DESCRIPTION A custom keyboard
|
||||||
|
|
||||||
|
/* key matrix size */
|
||||||
|
#define MATRIX_ROWS 10
|
||||||
|
#define MATRIX_COLS 4
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Keyboard Matrix Assignments
|
||||||
|
*
|
||||||
|
* Change this to how you wired your keyboard
|
||||||
|
* COLS: AVR pins used for columns, left to right
|
||||||
|
* ROWS: AVR pins used for rows, top to bottom
|
||||||
|
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||||
|
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
|
||||||
|
#define MATRIX_COL_PINS { F4, F5, F6, F7 }
|
||||||
|
#define UNUSED_PINS
|
||||||
|
#define USE_I2C
|
||||||
|
#undef USE_SERIAL
|
||||||
|
|
||||||
|
/* COL2ROW, ROW2COL*/
|
||||||
|
#define DIODE_DIRECTION COL2ROW
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
|
||||||
|
*/
|
||||||
|
#define SOFT_SERIAL_PIN D0 // or D1, D2, D3, E6
|
||||||
|
#define SPLIT_HAND_PIN D2
|
||||||
|
|
||||||
|
// #define BACKLIGHT_PIN B7
|
||||||
|
// #define BACKLIGHT_BREATHING
|
||||||
|
// #define BACKLIGHT_LEVELS 3
|
||||||
|
|
||||||
|
#define RGB_DI_PIN D3
|
||||||
|
#ifdef RGB_DI_PIN
|
||||||
|
#define RGBLED_NUM 18
|
||||||
|
#define RGBLIGHT_HUE_STEP 8
|
||||||
|
#define RGBLIGHT_SAT_STEP 8
|
||||||
|
#define RGBLIGHT_VAL_STEP 8
|
||||||
|
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||||
|
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||||
|
// /*== all animations enable ==*/
|
||||||
|
#define RGBLIGHT_ANIMATIONS
|
||||||
|
// /*== or choose animations ==*/
|
||||||
|
// #define RGBLIGHT_EFFECT_BREATHING
|
||||||
|
// #define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||||
|
// #define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||||
|
// #define RGBLIGHT_EFFECT_SNAKE
|
||||||
|
// #define RGBLIGHT_EFFECT_KNIGHT
|
||||||
|
// #define RGBLIGHT_EFFECT_CHRISTMAS
|
||||||
|
// #define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||||
|
// #define RGBLIGHT_EFFECT_RGB_TEST
|
||||||
|
// #define RGBLIGHT_EFFECT_ALTERNATING
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||||
|
#define DEBOUNCE 5
|
||||||
|
|
||||||
|
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||||
|
//#define MATRIX_HAS_GHOST
|
||||||
|
|
||||||
|
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||||
|
#define LOCKING_SUPPORT_ENABLE
|
||||||
|
/* Locking resynchronize hack */
|
||||||
|
#define LOCKING_RESYNC_ENABLE
|
||||||
|
|
||||||
|
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||||
|
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||||
|
*/
|
||||||
|
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Force NKRO
|
||||||
|
*
|
||||||
|
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||||
|
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||||
|
* makefile for this to work.)
|
||||||
|
*
|
||||||
|
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||||
|
* until the next keyboard reset.
|
||||||
|
*
|
||||||
|
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||||
|
* fully operational during normal computer usage.
|
||||||
|
*
|
||||||
|
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||||
|
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||||
|
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||||
|
* power-up.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
//#define FORCE_NKRO
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Magic Key Options
|
||||||
|
*
|
||||||
|
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||||
|
* the keyboard. They are best used in combination with the HID Listen program,
|
||||||
|
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||||
|
*
|
||||||
|
* The options below allow the magic key functionality to be changed. This is
|
||||||
|
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||||
|
*
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* key combination for magic key command */
|
||||||
|
/* defined by default; to change, uncomment and set to the combination you want */
|
||||||
|
// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
|
||||||
|
|
||||||
|
/* control how magic key switches layers */
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||||
|
|
||||||
|
/* override magic key keymap */
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||||
|
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||||
|
//#define MAGIC_KEY_HELP H
|
||||||
|
//#define MAGIC_KEY_HELP_ALT SLASH
|
||||||
|
//#define MAGIC_KEY_DEBUG D
|
||||||
|
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||||
|
//#define MAGIC_KEY_DEBUG_KBD K
|
||||||
|
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||||
|
//#define MAGIC_KEY_VERSION V
|
||||||
|
//#define MAGIC_KEY_STATUS S
|
||||||
|
//#define MAGIC_KEY_CONSOLE C
|
||||||
|
//#define MAGIC_KEY_LAYER0 0
|
||||||
|
//#define MAGIC_KEY_LAYER0_ALT GRAVE
|
||||||
|
//#define MAGIC_KEY_LAYER1 1
|
||||||
|
//#define MAGIC_KEY_LAYER2 2
|
||||||
|
//#define MAGIC_KEY_LAYER3 3
|
||||||
|
//#define MAGIC_KEY_LAYER4 4
|
||||||
|
//#define MAGIC_KEY_LAYER5 5
|
||||||
|
//#define MAGIC_KEY_LAYER6 6
|
||||||
|
//#define MAGIC_KEY_LAYER7 7
|
||||||
|
//#define MAGIC_KEY_LAYER8 8
|
||||||
|
//#define MAGIC_KEY_LAYER9 9
|
||||||
|
//#define MAGIC_KEY_BOOTLOADER B
|
||||||
|
//#define MAGIC_KEY_BOOTLOADER_ALT ESC
|
||||||
|
//#define MAGIC_KEY_LOCK CAPS
|
||||||
|
//#define MAGIC_KEY_EEPROM E
|
||||||
|
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
|
||||||
|
//#define MAGIC_KEY_NKRO N
|
||||||
|
//#define MAGIC_KEY_SLEEP_LED Z
|
||||||
|
|
||||||
|
/*
|
||||||
|
* Feature disable options
|
||||||
|
* These options are also useful to firmware size reduction.
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* disable debug print */
|
||||||
|
//#define NO_DEBUG
|
||||||
|
|
||||||
|
/* disable print */
|
||||||
|
//#define NO_PRINT
|
||||||
|
|
||||||
|
/* disable action features */
|
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
|
/*
|
||||||
|
* MIDI options
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Prevent use of disabled MIDI features in the keymap */
|
||||||
|
//#define MIDI_ENABLE_STRICT 1
|
||||||
|
|
||||||
|
/* enable basic MIDI features:
|
||||||
|
- MIDI notes can be sent when in Music mode is on
|
||||||
|
*/
|
||||||
|
//#define MIDI_BASIC
|
||||||
|
|
||||||
|
/* enable advanced MIDI features:
|
||||||
|
- MIDI notes can be added to the keymap
|
||||||
|
- Octave shift and transpose
|
||||||
|
- Virtual sustain, portamento, and modulation wheel
|
||||||
|
- etc.
|
||||||
|
*/
|
||||||
|
//#define MIDI_ADVANCED
|
||||||
|
|
||||||
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
|
//#define MIDI_TONE_KEYCODE_OCTAVES 1
|
||||||
|
|
||||||
|
/*
|
||||||
|
* HD44780 LCD Display Configuration
|
||||||
|
*/
|
||||||
|
/*
|
||||||
|
#define LCD_LINES 2 //< number of visible lines of the display
|
||||||
|
#define LCD_DISP_LENGTH 16 //< visibles characters per line of the display
|
||||||
|
|
||||||
|
#define LCD_IO_MODE 1 //< 0: memory mapped mode, 1: IO port mode
|
||||||
|
|
||||||
|
#if LCD_IO_MODE
|
||||||
|
#define LCD_PORT PORTB //< port for the LCD lines
|
||||||
|
#define LCD_DATA0_PORT LCD_PORT //< port for 4bit data bit 0
|
||||||
|
#define LCD_DATA1_PORT LCD_PORT //< port for 4bit data bit 1
|
||||||
|
#define LCD_DATA2_PORT LCD_PORT //< port for 4bit data bit 2
|
||||||
|
#define LCD_DATA3_PORT LCD_PORT //< port for 4bit data bit 3
|
||||||
|
#define LCD_DATA0_PIN 4 //< pin for 4bit data bit 0
|
||||||
|
#define LCD_DATA1_PIN 5 //< pin for 4bit data bit 1
|
||||||
|
#define LCD_DATA2_PIN 6 //< pin for 4bit data bit 2
|
||||||
|
#define LCD_DATA3_PIN 7 //< pin for 4bit data bit 3
|
||||||
|
#define LCD_RS_PORT LCD_PORT //< port for RS line
|
||||||
|
#define LCD_RS_PIN 3 //< pin for RS line
|
||||||
|
#define LCD_RW_PORT LCD_PORT //< port for RW line
|
||||||
|
#define LCD_RW_PIN 2 //< pin for RW line
|
||||||
|
#define LCD_E_PORT LCD_PORT //< port for Enable line
|
||||||
|
#define LCD_E_PIN 1 //< pin for Enable line
|
||||||
|
#endif
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Bootmagic Lite key configuration */
|
||||||
|
// #define BOOTMAGIC_LITE_ROW 0
|
||||||
|
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||||
|
|
||||||
|
// #define RGBLED_SPLIT {18,18}
|
||||||
|
|
@ -0,0 +1,18 @@
|
||||||
|
# suihankey_rev1
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
Compact with only 36 keys is a concept keyboard.
|
||||||
|
Supports OLED and RGBLED (optional)
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
Keyboard Maintainer: [kakunpc](https://github.com/kakunpc)
|
||||||
|
Hardware Supported: suihankey_rev1board_rev1, promicro
|
||||||
|
Hardware Availability: booth([@kakunpc](https://kakunpc.booth.pm/))
|
||||||
|
|
||||||
|
Make example for this keyboard (after setting up your build environment):
|
||||||
|
|
||||||
|
make suihankey/rev1:default
|
||||||
|
|
||||||
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||||
|
|
@ -0,0 +1,51 @@
|
||||||
|
/* Copyright 2019 kakunpc
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#include "rev1.h"
|
||||||
|
|
||||||
|
// Optional override functions below.
|
||||||
|
// You can leave any or all of these undefined.
|
||||||
|
// These are only required if you want to perform custom actions.
|
||||||
|
|
||||||
|
/*
|
||||||
|
|
||||||
|
void matrix_init_kb(void) {
|
||||||
|
// put your keyboard start-up code here
|
||||||
|
// runs once when the firmware starts up
|
||||||
|
|
||||||
|
matrix_init_user();
|
||||||
|
}
|
||||||
|
|
||||||
|
void matrix_scan_kb(void) {
|
||||||
|
// put your looping keyboard code here
|
||||||
|
// runs every cycle (a lot)
|
||||||
|
|
||||||
|
matrix_scan_user();
|
||||||
|
}
|
||||||
|
|
||||||
|
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||||
|
// put your per-action keyboard code here
|
||||||
|
// runs for every action, just before processing by the firmware
|
||||||
|
|
||||||
|
return process_record_user(keycode, record);
|
||||||
|
}
|
||||||
|
|
||||||
|
void led_set_kb(uint8_t usb_led) {
|
||||||
|
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||||
|
|
||||||
|
led_set_user(usb_led);
|
||||||
|
}
|
||||||
|
|
||||||
|
*/
|
||||||
|
|
@ -0,0 +1,45 @@
|
||||||
|
/* Copyright 2019 kakunpc
|
||||||
|
*
|
||||||
|
* This program is free software: you can redistribute it and/or modify
|
||||||
|
* it under the terms of the GNU General Public License as published by
|
||||||
|
* the Free Software Foundation, either version 2 of the License, or
|
||||||
|
* (at your option) any later version.
|
||||||
|
*
|
||||||
|
* This program is distributed in the hope that it will be useful,
|
||||||
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||||
|
* GNU General Public License for more details.
|
||||||
|
*
|
||||||
|
* You should have received a copy of the GNU General Public License
|
||||||
|
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
*/
|
||||||
|
#pragma once
|
||||||
|
|
||||||
|
#include "quantum.h"
|
||||||
|
|
||||||
|
/* This a shortcut to help you visually see your layout.
|
||||||
|
*
|
||||||
|
* The first section contains all of the arguments representing the physical
|
||||||
|
* layout of the board and position of the Leys.
|
||||||
|
*
|
||||||
|
* The second converts the arguments into a two-dimensional array which
|
||||||
|
* represents the switch matrix.
|
||||||
|
*/
|
||||||
|
#define LAYOUT( \
|
||||||
|
L00, L01, L02, L03, L04, R04, R03, R02, R01, R00, \
|
||||||
|
L10, L11, L12, L13, L14, R14, R13, R12, R11, R10, \
|
||||||
|
L20, L21, L22, L23, L24, R24, R23, R22, R21, R20, \
|
||||||
|
L30, L31, L32, R32, R31, R30 \
|
||||||
|
) \
|
||||||
|
{ \
|
||||||
|
{ L00, L10, L20, L30 }, \
|
||||||
|
{ L01, L11, L21, L31 }, \
|
||||||
|
{ L02, L12, L22, L32 }, \
|
||||||
|
{ L03, L13, L23, KC_NO }, \
|
||||||
|
{ L04, L14, L24, KC_NO }, \
|
||||||
|
{ R00, R10, R20, R30 }, \
|
||||||
|
{ R01, R11, R21, R31 }, \
|
||||||
|
{ R02, R12, R22, R32 }, \
|
||||||
|
{ R03, R13, R23, KC_NO }, \
|
||||||
|
{ R04, R14, R24, KC_NO }, \
|
||||||
|
}
|
||||||
|
|
@ -0,0 +1,82 @@
|
||||||
|
# MCU name
|
||||||
|
MCU = atmega32u4
|
||||||
|
|
||||||
|
# Processor frequency.
|
||||||
|
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||||
|
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||||
|
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||||
|
# automatically to create a 32-bit value in your source code.
|
||||||
|
#
|
||||||
|
# This will be an integer division of F_USB below, as it is sourced by
|
||||||
|
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||||
|
# does not *change* the processor frequency - it should merely be updated to
|
||||||
|
# reflect the processor speed set externally so that the code can use accurate
|
||||||
|
# software delays.
|
||||||
|
F_CPU = 16000000
|
||||||
|
|
||||||
|
|
||||||
|
#
|
||||||
|
# LUFA specific
|
||||||
|
#
|
||||||
|
# Target architecture (see library "Board Types" documentation).
|
||||||
|
ARCH = AVR8
|
||||||
|
|
||||||
|
# Input clock frequency.
|
||||||
|
# This will define a symbol, F_USB, in all source code files equal to the
|
||||||
|
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||||
|
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||||
|
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||||
|
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||||
|
# at the end, this will be done automatically to create a 32-bit value in your
|
||||||
|
# source code.
|
||||||
|
#
|
||||||
|
# If no clock division is performed on the input clock inside the AVR (via the
|
||||||
|
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
# Interrupt driven control endpoint task(+60)
|
||||||
|
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||||
|
|
||||||
|
|
||||||
|
# Bootloader selection
|
||||||
|
# Teensy halfkay
|
||||||
|
# Pro Micro caterina
|
||||||
|
# Atmel DFU atmel-dfu
|
||||||
|
# LUFA DFU lufa-dfu
|
||||||
|
# QMK DFU qmk-dfu
|
||||||
|
# atmega32a bootloadHID
|
||||||
|
BOOTLOADER = atmel-dfu
|
||||||
|
|
||||||
|
|
||||||
|
# If you don't know the bootloader type, then you can specify the
|
||||||
|
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
|
||||||
|
# Teensy halfKay 512
|
||||||
|
# Teensy++ halfKay 1024
|
||||||
|
# Atmel DFU loader 4096
|
||||||
|
# LUFA bootloader 4096
|
||||||
|
# USBaspLoader 2048
|
||||||
|
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||||
|
|
||||||
|
|
||||||
|
# Build Options
|
||||||
|
# change yes to no to disable
|
||||||
|
#
|
||||||
|
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
|
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||||
|
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||||
|
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||||
|
NKRO_ENABLE = no # USB Nkey Rollover
|
||||||
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||||
|
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||||
|
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
||||||
|
UNICODE_ENABLE = no # Unicode
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
AUDIO_ENABLE = no # Audio output on port C6
|
||||||
|
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||||
|
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
||||||
|
OLED_DRIVER_ENABLE = no
|
||||||
|
SPLIT_KEYBOARD = yes
|
||||||
|
|
@ -0,0 +1,4 @@
|
||||||
|
OLED_DRIVER_ENABLE = no
|
||||||
|
SPLIT_KEYBOARD = yes
|
||||||
|
|
||||||
|
DEFAULT_FOLDER = suihankey/split/rev1
|
||||||
Loading…
Reference in New Issue