Adding Singa Repo w/ Config Support (#3155)
* Adding Singa Repo w/ Config Support * Used Tilde instead of GRV * PR Fixes * oops, forgot to change the keymaps * splitbs -> split_bsmaster
Jason
Drashna Jaelre
parent
a474d6b49f
commit
aaeaf27e11
|
|
@ -0,0 +1,49 @@
|
|||
/*
|
||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
#define VENDOR_ID 0x20A0
|
||||
#define PRODUCT_ID 0x422D
|
||||
#define MANUFACTURER Singa Keyboards
|
||||
#define PRODUCT Singa
|
||||
|
||||
#define RGBLED_NUM 16
|
||||
|
||||
#define MATRIX_ROWS 7
|
||||
#define MATRIX_COLS 15
|
||||
|
||||
#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6 }
|
||||
#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
#define NO_BACKLIGHT_CLOCK
|
||||
#define BACKLIGHT_LEVELS 1
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
|
||||
#define NO_UART 1
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,106 @@
|
|||
/*
|
||||
Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
// Please do not modify this file
|
||||
|
||||
#include <avr/io.h>
|
||||
#include <util/twi.h>
|
||||
|
||||
#include "i2c.h"
|
||||
|
||||
void i2c_set_bitrate(uint16_t bitrate_khz) {
|
||||
uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
|
||||
if (bitrate_div >= 16) {
|
||||
bitrate_div = (bitrate_div - 16) / 2;
|
||||
}
|
||||
TWBR = bitrate_div;
|
||||
}
|
||||
|
||||
void i2c_init(void) {
|
||||
// set pull-up resistors on I2C bus pins
|
||||
PORTC |= 0b11;
|
||||
|
||||
i2c_set_bitrate(400);
|
||||
|
||||
// enable TWI (two-wire interface)
|
||||
TWCR |= (1 << TWEN);
|
||||
|
||||
// enable TWI interrupt and slave address ACK
|
||||
TWCR |= (1 << TWIE);
|
||||
TWCR |= (1 << TWEA);
|
||||
}
|
||||
|
||||
uint8_t i2c_start(uint8_t address) {
|
||||
// reset TWI control register
|
||||
TWCR = 0;
|
||||
|
||||
// begin transmission and wait for it to end
|
||||
TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
|
||||
while (!(TWCR & (1<<TWINT)));
|
||||
|
||||
// check if the start condition was successfully transmitted
|
||||
if ((TWSR & 0xF8) != TW_START) {
|
||||
return 1;
|
||||
}
|
||||
|
||||
// transmit address and wait
|
||||
TWDR = address;
|
||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
||||
while (!(TWCR & (1<<TWINT)));
|
||||
|
||||
// check if the device has acknowledged the READ / WRITE mode
|
||||
uint8_t twst = TW_STATUS & 0xF8;
|
||||
if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
|
||||
return 1;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
void i2c_stop(void) {
|
||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
|
||||
}
|
||||
|
||||
uint8_t i2c_write(uint8_t data) {
|
||||
TWDR = data;
|
||||
|
||||
// transmit data and wait
|
||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
||||
while (!(TWCR & (1<<TWINT)));
|
||||
|
||||
if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
|
||||
return 1;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
|
||||
if (i2c_start(address)) {
|
||||
return 1;
|
||||
}
|
||||
|
||||
for (uint16_t i = 0; i < length; i++) {
|
||||
if (i2c_write(data[i])) {
|
||||
return 1;
|
||||
}
|
||||
}
|
||||
|
||||
i2c_stop();
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -0,0 +1,27 @@
|
|||
/*
|
||||
Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
// Please do not modify this file
|
||||
|
||||
#ifndef __I2C_H__
|
||||
#define __I2C_H__
|
||||
|
||||
void i2c_init(void);
|
||||
void i2c_set_bitrate(uint16_t bitrate_khz);
|
||||
uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,36 @@
|
|||
{
|
||||
"keyboard_name": "Singa",
|
||||
"url": "http://singakbd.com/",
|
||||
"maintainer": "qmk",
|
||||
"width": 16,
|
||||
"height": 6,
|
||||
"layouts": {
|
||||
"LAYOUT": {
|
||||
"layout": [{"label":"K05", "x":0, "y":0}, {"label":"K25", "x":1, "y":0}, {"label":"K35", "x":2, "y":0}, {"label":"K45", "x":3, "y":0}, {"label":"K55", "x":4, "y":0}, {"label":"K06", "x":5, "y":0}, {"label":"KA6", "x":6, "y":0}, {"label":"KA7", "x":7, "y":0}, {"label":"K07", "x":8, "y":0}, {"label":"KB5", "x":9, "y":0}, {"label":"KC5", "x":10, "y":0}, {"label":"KD5", "x":11, "y":0}, {"label":"KE5", "x":12, "y":0}, {"label":"KD1", "x":13, "y":0}, {"label":"KE1", "x":14, "y":0}, {"label":"KE2", "x":15, "y":0}, {"label":"K04", "x":0, "y":1}, {"label":"K14", "x":1, "y":1}, {"label":"K24", "x":2, "y":1}, {"label":"K34", "x":3, "y":1}, {"label":"K44", "x":4, "y":1}, {"label":"K54", "x":5, "y":1}, {"label":"K16", "x":6, "y":1}, {"label":"KB6", "x":7, "y":1}, {"label":"KB7", "x":8, "y":1}, {"label":"K17", "x":9, "y":1}, {"label":"KA4", "x":10, "y":1}, {"label":"KB4", "x":11, "y":1}, {"label":"KC4", "x":12, "y":1}, {"label":"KE4", "x":13, "y":1}, {"label":"KE4", "x":14, "y":1}, {"label":"KD0", "x":15, "y":1}, {"label":"K03", "x":0, "y":2, "w":1.5}, {"label":"K13", "x":1.5, "y":2}, {"label":"K23", "x":2.5, "y":2}, {"label":"K33", "x":3.5, "y":2}, {"label":"K43", "x":4.5, "y":2}, {"label":"K53", "x":5.5, "y":2}, {"label":"K26", "x":6.5, "y":2}, {"label":"KC6", "x":7.5, "y":2}, {"label":"KC7", "x":8.5, "y":2}, {"label":"K27", "x":9.5, "y":2}, {"label":"KA3", "x":10.5, "y":2}, {"label":"KB3", "x":11.5, "y":2}, {"label":"KC3", "x":12.5, "y":2}, {"label":"KD3", "x":13.5, "y":2, "w":1.5}, {"label":"K67", "x":15, "y":2}, {"label":"K02", "x":0, "y":3, "w":1.75}, {"label":"K12", "x":1.75, "y":3}, {"label":"K22", "x":2.75, "y":3}, {"label":"K32", "x":3.75, "y":3}, {"label":"K42", "x":4.75, "y":3}, {"label":"K52", "x":5.75, "y":3}, {"label":"K36", "x":6.75, "y":3}, {"label":"KD6", "x":7.75, "y":3}, {"label":"KD7", "x":8.75, "y":3}, {"label":"K37", "x":9.75, "y":3}, {"label":"KA2", "x":10.75, "y":3}, {"label":"KB2", "x":11.75, "y":3}, {"label":"KD2", "x":12.75, "y":3}, {"label":"KD2", "x":13.75, "y":3, "w":1.25}, {"label":"KE0", "x":15, "y":3}, {"label":"K01", "x":0, "y":4, "w":1.25}, {"label":"K01", "x":1.25, "y":4}, {"label":"K11", "x":2.25, "y":4}, {"label":"K21", "x":3.25, "y":4}, {"label":"K31", "x":4.25, "y":4}, {"label":"K41", "x":5.25, "y":4}, {"label":"K51", "x":6.25, "y":4}, {"label":"K46", "x":7.25, "y":4}, {"label":"KE6", "x":8.25, "y":4}, {"label":"KE7", "x":9.25, "y":4}, {"label":"K47", "x":10.25, "y":4}, {"label":"KA1", "x":11.25, "y":4}, {"label":"KB1", "x":12.25, "y":4, "w":1.75}, {"label":"K86", "x":14, "y":4}, {"label":"K77", "x":15, "y":4}, {"label":"K00", "x":0, "y":5, "w":1.25}, {"label":"K00", "x":1.25, "y":5, "w":1.25}, {"label":"K20", "x":2.5, "y":5, "w":1.25}, {"label":"K56", "x":3.75, "y":5, "w":2.25}, {"label":"K20", "x":6, "y":5, "w":1.25}, {"label":"K56", "x":7.25, "y":5, "w":2.75}, {"label":"K57", "x":10, "y":5}, {"label":"K57", "x":11, "y":5}, {"label":"K57", "x":12, "y":5}, {"label":"K66", "x":13, "y":5}, {"label":"K76", "x":14, "y":5}, {"label":"K96", "x":15, "y":5}]
|
||||
},
|
||||
|
||||
"LAYOUT_wkl": {
|
||||
"layout": [{"label":"K05", "x":0, "y":0}, {"label":"K25", "x":1, "y":0}, {"label":"K35", "x":2, "y":0}, {"label":"K45", "x":3, "y":0}, {"label":"K55", "x":4, "y":0}, {"label":"K06", "x":5, "y":0}, {"label":"KA6", "x":6, "y":0}, {"label":"KA7", "x":7, "y":0}, {"label":"K07", "x":8, "y":0}, {"label":"KB5", "x":9, "y":0}, {"label":"KC5", "x":10, "y":0}, {"label":"KD5", "x":11, "y":0}, {"label":"KE5", "x":12, "y":0}, {"label":"KD1", "x":13, "y":0}, {"label":"KE1", "x":14, "y":0}, {"label":"KE2", "x":15, "y":0}, {"label":"K04", "x":0, "y":1}, {"label":"K14", "x":1, "y":1}, {"label":"K24", "x":2, "y":1}, {"label":"K34", "x":3, "y":1}, {"label":"K44", "x":4, "y":1}, {"label":"K54", "x":5, "y":1}, {"label":"K16", "x":6, "y":1}, {"label":"KB6", "x":7, "y":1}, {"label":"KB7", "x":8, "y":1}, {"label":"K17", "x":9, "y":1}, {"label":"KA4", "x":10, "y":1}, {"label":"KB4", "x":11, "y":1}, {"label":"KC4", "x":12, "y":1}, {"label":"KE4", "x":13, "y":1, "w":2}, {"label":"KD0", "x":15, "y":1}, {"label":"K03", "x":0, "y":2, "w":1.5}, {"label":"K13", "x":1.5, "y":2}, {"label":"K23", "x":2.5, "y":2}, {"label":"K33", "x":3.5, "y":2}, {"label":"K43", "x":4.5, "y":2}, {"label":"K53", "x":5.5, "y":2}, {"label":"K26", "x":6.5, "y":2}, {"label":"KC6", "x":7.5, "y":2}, {"label":"KC7", "x":8.5, "y":2}, {"label":"K27", "x":9.5, "y":2}, {"label":"KA3", "x":10.5, "y":2}, {"label":"KB3", "x":11.5, "y":2}, {"label":"KC3", "x":12.5, "y":2}, {"label":"KD3", "x":13.5, "y":2, "w":1.5}, {"label":"K67", "x":15, "y":2}, {"label":"K02", "x":0, "y":3, "w":1.75}, {"label":"K12", "x":1.75, "y":3}, {"label":"K22", "x":2.75, "y":3}, {"label":"K32", "x":3.75, "y":3}, {"label":"K42", "x":4.75, "y":3}, {"label":"K52", "x":5.75, "y":3}, {"label":"K36", "x":6.75, "y":3}, {"label":"KD6", "x":7.75, "y":3}, {"label":"KD7", "x":8.75, "y":3}, {"label":"K37", "x":9.75, "y":3}, {"label":"KA2", "x":10.75, "y":3}, {"label":"KB2", "x":11.75, "y":3}, {"label":"KD2", "x":12.75, "y":3, "w":2.25}, {"label":"KE0", "x":15, "y":3}, {"label":"K01", "x":0, "y":4, "w":2.25}, {"label":"K11", "x":2.25, "y":4}, {"label":"K21", "x":3.25, "y":4}, {"label":"K31", "x":4.25, "y":4}, {"label":"K41", "x":5.25, "y":4}, {"label":"K51", "x":6.25, "y":4}, {"label":"K46", "x":7.25, "y":4}, {"label":"KE6", "x":8.25, "y":4}, {"label":"KE7", "x":9.25, "y":4}, {"label":"K47", "x":10.25, "y":4}, {"label":"KA1", "x":11.25, "y":4}, {"label":"KB1", "x":12.25, "y":4, "w":1.75}, {"label":"K86", "x":14, "y":4}, {"label":"K77", "x":15, "y":4}, {"label":"K00", "x":0, "y":5, "w":1.5}, {"label":"K20", "x":2.5, "y":5, "w":1.5}, {"label":"K56", "x":4, "y":5, "w":7}, {"label":"K57", "x":11, "y":5, "w":1.5}, {"label":"K66", "x":13, "y":5}, {"label":"K76", "x":14, "y":5}, {"label":"K96", "x":15, "y":5}]
|
||||
},
|
||||
|
||||
"LAYOUT_wkl_splitbs": {
|
||||
"layout": [{"label":"K05", "x":0, "y":0}, {"label":"K25", "x":1, "y":0}, {"label":"K35", "x":2, "y":0}, {"label":"K45", "x":3, "y":0}, {"label":"K55", "x":4, "y":0}, {"label":"K06", "x":5, "y":0}, {"label":"KA6", "x":6, "y":0}, {"label":"KA7", "x":7, "y":0}, {"label":"K07", "x":8, "y":0}, {"label":"KB5", "x":9, "y":0}, {"label":"KC5", "x":10, "y":0}, {"label":"KD5", "x":11, "y":0}, {"label":"KE5", "x":12, "y":0}, {"label":"KD1", "x":13, "y":0}, {"label":"KE1", "x":14, "y":0}, {"label":"KE2", "x":15, "y":0}, {"label":"K04", "x":0, "y":1}, {"label":"K14", "x":1, "y":1}, {"label":"K24", "x":2, "y":1}, {"label":"K34", "x":3, "y":1}, {"label":"K44", "x":4, "y":1}, {"label":"K54", "x":5, "y":1}, {"label":"K16", "x":6, "y":1}, {"label":"KB6", "x":7, "y":1}, {"label":"KB7", "x":8, "y":1}, {"label":"K17", "x":9, "y":1}, {"label":"KA4", "x":10, "y":1}, {"label":"KB4", "x":11, "y":1}, {"label":"KC4", "x":12, "y":1}, {"label":"KE4", "x":13, "y":1}, {"label":"KE4", "x":14, "y":1}, {"label":"KD0", "x":15, "y":1}, {"label":"K03", "x":0, "y":2, "w":1.5}, {"label":"K13", "x":1.5, "y":2}, {"label":"K23", "x":2.5, "y":2}, {"label":"K33", "x":3.5, "y":2}, {"label":"K43", "x":4.5, "y":2}, {"label":"K53", "x":5.5, "y":2}, {"label":"K26", "x":6.5, "y":2}, {"label":"KC6", "x":7.5, "y":2}, {"label":"KC7", "x":8.5, "y":2}, {"label":"K27", "x":9.5, "y":2}, {"label":"KA3", "x":10.5, "y":2}, {"label":"KB3", "x":11.5, "y":2}, {"label":"KC3", "x":12.5, "y":2}, {"label":"KD3", "x":13.5, "y":2, "w":1.5}, {"label":"K67", "x":15, "y":2}, {"label":"K02", "x":0, "y":3, "w":1.75}, {"label":"K12", "x":1.75, "y":3}, {"label":"K22", "x":2.75, "y":3}, {"label":"K32", "x":3.75, "y":3}, {"label":"K42", "x":4.75, "y":3}, {"label":"K52", "x":5.75, "y":3}, {"label":"K36", "x":6.75, "y":3}, {"label":"KD6", "x":7.75, "y":3}, {"label":"KD7", "x":8.75, "y":3}, {"label":"K37", "x":9.75, "y":3}, {"label":"KA2", "x":10.75, "y":3}, {"label":"KB2", "x":11.75, "y":3}, {"label":"KD2", "x":12.75, "y":3, "w":2.25}, {"label":"KE0", "x":15, "y":3}, {"label":"K01", "x":0, "y":4, "w":2.25}, {"label":"K11", "x":2.25, "y":4}, {"label":"K21", "x":3.25, "y":4}, {"label":"K31", "x":4.25, "y":4}, {"label":"K41", "x":5.25, "y":4}, {"label":"K51", "x":6.25, "y":4}, {"label":"K46", "x":7.25, "y":4}, {"label":"KE6", "x":8.25, "y":4}, {"label":"KE7", "x":9.25, "y":4}, {"label":"K47", "x":10.25, "y":4}, {"label":"KA1", "x":11.25, "y":4}, {"label":"KB1", "x":12.25, "y":4, "w":1.75}, {"label":"K86", "x":14, "y":4}, {"label":"K77", "x":15, "y":4}, {"label":"K00", "x":0, "y":5, "w":1.5}, {"label":"K20", "x":2.5, "y":5, "w":1.5}, {"label":"K56", "x":4, "y":5, "w":7}, {"label":"K57", "x":11, "y":5, "w":1.5}, {"label":"K66", "x":13, "y":5}, {"label":"K76", "x":14, "y":5}, {"label":"K96", "x":15, "y":5}]
|
||||
},
|
||||
|
||||
"LAYOUT_tsangan": {
|
||||
"layout": [{"label":"K05", "x":0, "y":0}, {"label":"K25", "x":1, "y":0}, {"label":"K35", "x":2, "y":0}, {"label":"K45", "x":3, "y":0}, {"label":"K55", "x":4, "y":0}, {"label":"K06", "x":5, "y":0}, {"label":"KA6", "x":6, "y":0}, {"label":"KA7", "x":7, "y":0}, {"label":"K07", "x":8, "y":0}, {"label":"KB5", "x":9, "y":0}, {"label":"KC5", "x":10, "y":0}, {"label":"KD5", "x":11, "y":0}, {"label":"KE5", "x":12, "y":0}, {"label":"KD1", "x":13, "y":0}, {"label":"KE1", "x":14, "y":0}, {"label":"KE2", "x":15, "y":0}, {"label":"K04", "x":0, "y":1}, {"label":"K14", "x":1, "y":1}, {"label":"K24", "x":2, "y":1}, {"label":"K34", "x":3, "y":1}, {"label":"K44", "x":4, "y":1}, {"label":"K54", "x":5, "y":1}, {"label":"K16", "x":6, "y":1}, {"label":"KB6", "x":7, "y":1}, {"label":"KB7", "x":8, "y":1}, {"label":"K17", "x":9, "y":1}, {"label":"KA4", "x":10, "y":1}, {"label":"KB4", "x":11, "y":1}, {"label":"KC4", "x":12, "y":1}, {"label":"KE4", "x":13, "y":1, "w":2}, {"label":"KD0", "x":15, "y":1}, {"label":"K03", "x":0, "y":2, "w":1.5}, {"label":"K13", "x":1.5, "y":2}, {"label":"K23", "x":2.5, "y":2}, {"label":"K33", "x":3.5, "y":2}, {"label":"K43", "x":4.5, "y":2}, {"label":"K53", "x":5.5, "y":2}, {"label":"K26", "x":6.5, "y":2}, {"label":"KC6", "x":7.5, "y":2}, {"label":"KC7", "x":8.5, "y":2}, {"label":"K27", "x":9.5, "y":2}, {"label":"KA3", "x":10.5, "y":2}, {"label":"KB3", "x":11.5, "y":2}, {"label":"KC3", "x":12.5, "y":2}, {"label":"KD3", "x":13.5, "y":2, "w":1.5}, {"label":"K67", "x":15, "y":2}, {"label":"K02", "x":0, "y":3, "w":1.75}, {"label":"K12", "x":1.75, "y":3}, {"label":"K22", "x":2.75, "y":3}, {"label":"K32", "x":3.75, "y":3}, {"label":"K42", "x":4.75, "y":3}, {"label":"K52", "x":5.75, "y":3}, {"label":"K36", "x":6.75, "y":3}, {"label":"KD6", "x":7.75, "y":3}, {"label":"KD7", "x":8.75, "y":3}, {"label":"K37", "x":9.75, "y":3}, {"label":"KA2", "x":10.75, "y":3}, {"label":"KB2", "x":11.75, "y":3}, {"label":"KD2", "x":12.75, "y":3, "w":2.25}, {"label":"KE0", "x":15, "y":3}, {"label":"K01", "x":0, "y":4, "w":2.25}, {"label":"K11", "x":2.25, "y":4}, {"label":"K21", "x":3.25, "y":4}, {"label":"K31", "x":4.25, "y":4}, {"label":"K41", "x":5.25, "y":4}, {"label":"K51", "x":6.25, "y":4}, {"label":"K46", "x":7.25, "y":4}, {"label":"KE6", "x":8.25, "y":4}, {"label":"KE7", "x":9.25, "y":4}, {"label":"K47", "x":10.25, "y":4}, {"label":"KA1", "x":11.25, "y":4}, {"label":"KB1", "x":12.25, "y":4, "w":1.75}, {"label":"K86", "x":14, "y":4}, {"label":"K77", "x":15, "y":4}, {"label":"K00", "x":0, "y":5, "w":1.5}, {"label":"K00", "x":1.5, "y":5}, {"label":"K20", "x":2.5, "y":5, "w":1.5}, {"label":"K56", "x":4, "y":5, "w":7}, {"label":"K57", "x":11, "y":5, "w":1.5}, {"label":"K66", "x":13, "y":5}, {"label":"K76", "x":14, "y":5}, {"label":"K96", "x":15, "y":5}]
|
||||
},
|
||||
|
||||
"LAYOUT_tsangan_splitbs": {
|
||||
"layout": [{"label":"K05", "x":0, "y":0}, {"label":"K25", "x":1, "y":0}, {"label":"K35", "x":2, "y":0}, {"label":"K45", "x":3, "y":0}, {"label":"K55", "x":4, "y":0}, {"label":"K06", "x":5, "y":0}, {"label":"KA6", "x":6, "y":0}, {"label":"KA7", "x":7, "y":0}, {"label":"K07", "x":8, "y":0}, {"label":"KB5", "x":9, "y":0}, {"label":"KC5", "x":10, "y":0}, {"label":"KD5", "x":11, "y":0}, {"label":"KE5", "x":12, "y":0}, {"label":"KD1", "x":13, "y":0}, {"label":"KE1", "x":14, "y":0}, {"label":"KE2", "x":15, "y":0}, {"label":"K04", "x":0, "y":1}, {"label":"K14", "x":1, "y":1}, {"label":"K24", "x":2, "y":1}, {"label":"K34", "x":3, "y":1}, {"label":"K44", "x":4, "y":1}, {"label":"K54", "x":5, "y":1}, {"label":"K16", "x":6, "y":1}, {"label":"KB6", "x":7, "y":1}, {"label":"KB7", "x":8, "y":1}, {"label":"K17", "x":9, "y":1}, {"label":"KA4", "x":10, "y":1}, {"label":"KB4", "x":11, "y":1}, {"label":"KC4", "x":12, "y":1}, {"label":"KE4", "x":13, "y":1}, {"label":"KE4", "x":14, "y":1}, {"label":"KD0", "x":15, "y":1}, {"label":"K03", "x":0, "y":2, "w":1.5}, {"label":"K13", "x":1.5, "y":2}, {"label":"K23", "x":2.5, "y":2}, {"label":"K33", "x":3.5, "y":2}, {"label":"K43", "x":4.5, "y":2}, {"label":"K53", "x":5.5, "y":2}, {"label":"K26", "x":6.5, "y":2}, {"label":"KC6", "x":7.5, "y":2}, {"label":"KC7", "x":8.5, "y":2}, {"label":"K27", "x":9.5, "y":2}, {"label":"KA3", "x":10.5, "y":2}, {"label":"KB3", "x":11.5, "y":2}, {"label":"KC3", "x":12.5, "y":2}, {"label":"KD3", "x":13.5, "y":2, "w":1.5}, {"label":"K67", "x":15, "y":2}, {"label":"K02", "x":0, "y":3, "w":1.75}, {"label":"K12", "x":1.75, "y":3}, {"label":"K22", "x":2.75, "y":3}, {"label":"K32", "x":3.75, "y":3}, {"label":"K42", "x":4.75, "y":3}, {"label":"K52", "x":5.75, "y":3}, {"label":"K36", "x":6.75, "y":3}, {"label":"KD6", "x":7.75, "y":3}, {"label":"KD7", "x":8.75, "y":3}, {"label":"K37", "x":9.75, "y":3}, {"label":"KA2", "x":10.75, "y":3}, {"label":"KB2", "x":11.75, "y":3}, {"label":"KD2", "x":12.75, "y":3, "w":2.25}, {"label":"KE0", "x":15, "y":3}, {"label":"K01", "x":0, "y":4, "w":2.25}, {"label":"K11", "x":2.25, "y":4}, {"label":"K21", "x":3.25, "y":4}, {"label":"K31", "x":4.25, "y":4}, {"label":"K41", "x":5.25, "y":4}, {"label":"K51", "x":6.25, "y":4}, {"label":"K46", "x":7.25, "y":4}, {"label":"KE6", "x":8.25, "y":4}, {"label":"KE7", "x":9.25, "y":4}, {"label":"K47", "x":10.25, "y":4}, {"label":"KA1", "x":11.25, "y":4}, {"label":"KB1", "x":12.25, "y":4, "w":1.75}, {"label":"K86", "x":14, "y":4}, {"label":"K77", "x":15, "y":4}, {"label":"K00", "x":0, "y":5, "w":1.5}, {"label":"K00", "x":1.5, "y":5}, {"label":"K20", "x":2.5, "y":5, "w":1.5}, {"label":"K56", "x":4, "y":5, "w":7}, {"label":"K57", "x":11, "y":5, "w":1.5}, {"label":"K66", "x":13, "y":5}, {"label":"K76", "x":14, "y":5}, {"label":"K96", "x":15, "y":5}]
|
||||
},
|
||||
|
||||
"LAYOUT_wk": {
|
||||
"layout": [{"label":"K05", "x":0, "y":0}, {"label":"K25", "x":1, "y":0}, {"label":"K35", "x":2, "y":0}, {"label":"K45", "x":3, "y":0}, {"label":"K55", "x":4, "y":0}, {"label":"K06", "x":5, "y":0}, {"label":"KA6", "x":6, "y":0}, {"label":"KA7", "x":7, "y":0}, {"label":"K07", "x":8, "y":0}, {"label":"KB5", "x":9, "y":0}, {"label":"KC5", "x":10, "y":0}, {"label":"KD5", "x":11, "y":0}, {"label":"KE5", "x":12, "y":0}, {"label":"KD1", "x":13, "y":0}, {"label":"KE1", "x":14, "y":0}, {"label":"KE2", "x":15, "y":0}, {"label":"K04", "x":0, "y":1}, {"label":"K14", "x":1, "y":1}, {"label":"K24", "x":2, "y":1}, {"label":"K34", "x":3, "y":1}, {"label":"K44", "x":4, "y":1}, {"label":"K54", "x":5, "y":1}, {"label":"K16", "x":6, "y":1}, {"label":"KB6", "x":7, "y":1}, {"label":"KB7", "x":8, "y":1}, {"label":"K17", "x":9, "y":1}, {"label":"KA4", "x":10, "y":1}, {"label":"KB4", "x":11, "y":1}, {"label":"KC4", "x":12, "y":1}, {"label":"KE4", "x":13, "y":1, "w":2}, {"label":"KD0", "x":15, "y":1}, {"label":"K03", "x":0, "y":2, "w":1.5}, {"label":"K13", "x":1.5, "y":2}, {"label":"K23", "x":2.5, "y":2}, {"label":"K33", "x":3.5, "y":2}, {"label":"K43", "x":4.5, "y":2}, {"label":"K53", "x":5.5, "y":2}, {"label":"K26", "x":6.5, "y":2}, {"label":"KC6", "x":7.5, "y":2}, {"label":"KC7", "x":8.5, "y":2}, {"label":"K27", "x":9.5, "y":2}, {"label":"KA3", "x":10.5, "y":2}, {"label":"KB3", "x":11.5, "y":2}, {"label":"KC3", "x":12.5, "y":2}, {"label":"KD3", "x":13.5, "y":2, "w":1.5}, {"label":"K67", "x":15, "y":2}, {"label":"K02", "x":0, "y":3, "w":1.75}, {"label":"K12", "x":1.75, "y":3}, {"label":"K22", "x":2.75, "y":3}, {"label":"K32", "x":3.75, "y":3}, {"label":"K42", "x":4.75, "y":3}, {"label":"K52", "x":5.75, "y":3}, {"label":"K36", "x":6.75, "y":3}, {"label":"KD6", "x":7.75, "y":3}, {"label":"KD7", "x":8.75, "y":3}, {"label":"K37", "x":9.75, "y":3}, {"label":"KA2", "x":10.75, "y":3}, {"label":"KB2", "x":11.75, "y":3}, {"label":"KD2", "x":12.75, "y":3, "w":2.25}, {"label":"KE0", "x":15, "y":3}, {"label":"K01", "x":0, "y":4, "w":2.25}, {"label":"K11", "x":2.25, "y":4}, {"label":"K21", "x":3.25, "y":4}, {"label":"K31", "x":4.25, "y":4}, {"label":"K41", "x":5.25, "y":4}, {"label":"K51", "x":6.25, "y":4}, {"label":"K46", "x":7.25, "y":4}, {"label":"KE6", "x":8.25, "y":4}, {"label":"KE7", "x":9.25, "y":4}, {"label":"K47", "x":10.25, "y":4}, {"label":"KA1", "x":11.25, "y":4}, {"label":"KB1", "x":12.25, "y":4, "w":1.75}, {"label":"K86", "x":14, "y":4}, {"label":"K77", "x":15, "y":4}, {"label":"K00", "x":0, "y":5, "w":1.25}, {"label":"K00", "x":1.25, "y":5, "w":1.25}, {"label":"K20", "x":2.5, "y":5, "w":1.25}, {"label":"K56", "x":3.75, "y":5, "w":6.25}, {"label":"K57", "x":10, "y":5, "w":1.5}, {"label":"K57", "x":11.5, "y":5, "w":1.5}, {"label":"K66", "x":13, "y":5}, {"label":"K76", "x":14, "y":5}, {"label":"K96", "x":15, "y":5}]
|
||||
},
|
||||
|
||||
"LAYOUT_wk_splitbs": {
|
||||
"layout": [{"label":"K05", "x":0, "y":0}, {"label":"K25", "x":1, "y":0}, {"label":"K35", "x":2, "y":0}, {"label":"K45", "x":3, "y":0}, {"label":"K55", "x":4, "y":0}, {"label":"K06", "x":5, "y":0}, {"label":"KA6", "x":6, "y":0}, {"label":"KA7", "x":7, "y":0}, {"label":"K07", "x":8, "y":0}, {"label":"KB5", "x":9, "y":0}, {"label":"KC5", "x":10, "y":0}, {"label":"KD5", "x":11, "y":0}, {"label":"KE5", "x":12, "y":0}, {"label":"KD1", "x":13, "y":0}, {"label":"KE1", "x":14, "y":0}, {"label":"KE2", "x":15, "y":0}, {"label":"K04", "x":0, "y":1}, {"label":"K14", "x":1, "y":1}, {"label":"K24", "x":2, "y":1}, {"label":"K34", "x":3, "y":1}, {"label":"K44", "x":4, "y":1}, {"label":"K54", "x":5, "y":1}, {"label":"K16", "x":6, "y":1}, {"label":"KB6", "x":7, "y":1}, {"label":"KB7", "x":8, "y":1}, {"label":"K17", "x":9, "y":1}, {"label":"KA4", "x":10, "y":1}, {"label":"KB4", "x":11, "y":1}, {"label":"KC4", "x":12, "y":1}, {"label":"KE4", "x":13, "y":1}, {"label":"KE4", "x":14, "y":1}, {"label":"KD0", "x":15, "y":1}, {"label":"K03", "x":0, "y":2, "w":1.5}, {"label":"K13", "x":1.5, "y":2}, {"label":"K23", "x":2.5, "y":2}, {"label":"K33", "x":3.5, "y":2}, {"label":"K43", "x":4.5, "y":2}, {"label":"K53", "x":5.5, "y":2}, {"label":"K26", "x":6.5, "y":2}, {"label":"KC6", "x":7.5, "y":2}, {"label":"KC7", "x":8.5, "y":2}, {"label":"K27", "x":9.5, "y":2}, {"label":"KA3", "x":10.5, "y":2}, {"label":"KB3", "x":11.5, "y":2}, {"label":"KC3", "x":12.5, "y":2}, {"label":"KD3", "x":13.5, "y":2, "w":1.5}, {"label":"K67", "x":15, "y":2}, {"label":"K02", "x":0, "y":3, "w":1.75}, {"label":"K12", "x":1.75, "y":3}, {"label":"K22", "x":2.75, "y":3}, {"label":"K32", "x":3.75, "y":3}, {"label":"K42", "x":4.75, "y":3}, {"label":"K52", "x":5.75, "y":3}, {"label":"K36", "x":6.75, "y":3}, {"label":"KD6", "x":7.75, "y":3}, {"label":"KD7", "x":8.75, "y":3}, {"label":"K37", "x":9.75, "y":3}, {"label":"KA2", "x":10.75, "y":3}, {"label":"KB2", "x":11.75, "y":3}, {"label":"KD2", "x":12.75, "y":3, "w":2.25}, {"label":"KE0", "x":15, "y":3}, {"label":"K01", "x":0, "y":4, "w":2.25}, {"label":"K11", "x":2.25, "y":4}, {"label":"K21", "x":3.25, "y":4}, {"label":"K31", "x":4.25, "y":4}, {"label":"K41", "x":5.25, "y":4}, {"label":"K51", "x":6.25, "y":4}, {"label":"K46", "x":7.25, "y":4}, {"label":"KE6", "x":8.25, "y":4}, {"label":"KE7", "x":9.25, "y":4}, {"label":"K47", "x":10.25, "y":4}, {"label":"KA1", "x":11.25, "y":4}, {"label":"KB1", "x":12.25, "y":4, "w":1.75}, {"label":"K86", "x":14, "y":4}, {"label":"K77", "x":15, "y":4}, {"label":"K00", "x":0, "y":5, "w":1.25}, {"label":"K00", "x":1.25, "y":5, "w":1.25}, {"label":"K20", "x":2.5, "y":5, "w":1.25}, {"label":"K56", "x":3.75, "y":5, "w":6.25}, {"label":"K57", "x":10, "y":5, "w":1.5}, {"label":"K57", "x":11.5, "y":5, "w":1.5}, {"label":"K66", "x":13, "y":5}, {"label":"K76", "x":14, "y":5}, {"label":"K96", "x":15, "y":5}]
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,24 @@
|
|||
/* Copyright 2018 REPLACE_WITH_YOUR_NAME
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
// place overrides here
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
/* Copyright 2018 REPLACE_WITH_YOUR_NAME
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_BL] = LAYOUT_wkl( /* Base */
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_DEL, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, \
|
||||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, LT(_FL, KC_END), \
|
||||
KC_LGUI, KC_LALT, KC_SPC, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT \
|
||||
),
|
||||
|
||||
[_FL] = LAYOUT_wkl(
|
||||
RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, \
|
||||
KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_UP, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGUP, KC_LEFT, KC_RGHT, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_END, KC_PGDN, KC_DOWN, KC_TRNS, KC_PGUP, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_MPLY, KC_TRNS, KC_HOME, KC_PGDN, KC_END \
|
||||
)
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The default keymap for singa
|
||||
|
|
@ -0,0 +1,24 @@
|
|||
/* Copyright 2018 REPLACE_WITH_YOUR_NAME
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
// place overrides here
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,39 @@
|
|||
/* Copyright 2018 REPLACE_WITH_YOUR_NAME
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT_wkl( /* Base */
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_DEL, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_HOME, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, \
|
||||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, LT(1, KC_END), \
|
||||
KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_LEFT, KC_DOWN, KC_RGHT \
|
||||
),
|
||||
|
||||
[1] = LAYOUT_wkl( /* Base */
|
||||
RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_TRNS, \
|
||||
KC_CAPS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \
|
||||
)
|
||||
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The default keymap for singa
|
||||
|
|
@ -0,0 +1,24 @@
|
|||
/* Copyright 2018 REPLACE_WITH_YOUR_NAME
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
// place overrides here
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,47 @@
|
|||
/* Copyright 2018 REPLACE_WITH_YOUR_NAME
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
/*
|
||||
Bottom Row Pins to columns group as:
|
||||
0 (LCtl) | 1 (LGui) | 2 (LAlt) | 3 (1u**) | 4 (LSplt) | 5 (Spc) | 6 (RSplt) | 8 (RAlt) | 9 (RGui) | 10 (RCtrl) | 11 (1.25 Menu) | 12 (Left) | 13 (Down) | 14 (Right)
|
||||
1-3 | 4-6 | 7-10 | 11 | 12-13 | 14-18 | 19-20 | 21-23,25 | 24,26,29 | 27,28,32,33 | 30 | 31 | 34 | 35
|
||||
|
||||
** Can seemingly be used if all the bottom row keys besides space are 1u
|
||||
*/
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT( /* Base */
|
||||
KC_ESC, RESET, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_DEL, \
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NO, KC_HOME, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NO, KC_ENT, KC_PGDN, \
|
||||
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, LT(1, KC_END), \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_NO, KC_NO, KC_SPC, KC_NO, KC_RALT, KC_NO, KC_RCTL, KC_NO, KC_LEFT, KC_DOWN, KC_RGHT \
|
||||
),
|
||||
|
||||
[1] = LAYOUT( /* Base */
|
||||
RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, KC_NO, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS \
|
||||
)
|
||||
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The default keymap for singa
|
||||
|
|
@ -0,0 +1,112 @@
|
|||
/*
|
||||
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#include <avr/io.h>
|
||||
#include <util/delay.h>
|
||||
|
||||
#include "matrix.h"
|
||||
|
||||
#ifndef DEBOUNCE
|
||||
# define DEBOUNCE 5
|
||||
#endif
|
||||
|
||||
static uint8_t debouncing = DEBOUNCE;
|
||||
|
||||
static matrix_row_t matrix[MATRIX_ROWS];
|
||||
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
|
||||
|
||||
void matrix_set_row_status(uint8_t row);
|
||||
uint8_t bit_reverse(uint8_t x);
|
||||
|
||||
void matrix_init(void) {
|
||||
// all outputs for rows high
|
||||
DDRB = 0xFF;
|
||||
PORTB = 0xFF;
|
||||
// all inputs for columns
|
||||
DDRA = 0x00;
|
||||
DDRC &= ~(0x111111<<2);
|
||||
DDRD &= ~(1<<PIND7);
|
||||
// all columns are pulled-up
|
||||
PORTA = 0xFF;
|
||||
PORTC |= (0b111111<<2);
|
||||
PORTD |= (1<<PIND7);
|
||||
|
||||
// initialize matrix state: all keys off
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||
matrix[row] = 0x00;
|
||||
matrix_debouncing[row] = 0x00;
|
||||
}
|
||||
|
||||
matrix_init_quantum();
|
||||
}
|
||||
|
||||
uint8_t matrix_scan(void) {
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||
matrix_set_row_status(row);
|
||||
_delay_us(5);
|
||||
|
||||
matrix_row_t cols = (
|
||||
// cols 0..7, PORTA 0 -> 7
|
||||
(~PINA) & 0xFF
|
||||
) | (
|
||||
// cols 8..13, PORTC 7 -> 0
|
||||
bit_reverse((~PINC) & 0xFF) << 8
|
||||
) | (
|
||||
// col 14, PORTD 7
|
||||
((~PIND) & (1 << PIND7)) << 7
|
||||
);
|
||||
|
||||
if (matrix_debouncing[row] != cols) {
|
||||
matrix_debouncing[row] = cols;
|
||||
debouncing = DEBOUNCE;
|
||||
}
|
||||
}
|
||||
|
||||
if (debouncing) {
|
||||
if (--debouncing) {
|
||||
_delay_ms(1);
|
||||
} else {
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
matrix[i] = matrix_debouncing[i];
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
matrix_scan_quantum();
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
// declarations
|
||||
void matrix_set_row_status(uint8_t row) {
|
||||
DDRB = (1 << row);
|
||||
PORTB = ~(1 << row);
|
||||
}
|
||||
|
||||
uint8_t bit_reverse(uint8_t x) {
|
||||
x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
|
||||
x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
|
||||
x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
|
||||
return x;
|
||||
}
|
||||
|
||||
inline matrix_row_t matrix_get_row(uint8_t row) {
|
||||
return matrix[row];
|
||||
}
|
||||
|
||||
void matrix_print(void) {
|
||||
}
|
||||
|
|
@ -0,0 +1,19 @@
|
|||
# Singa
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
A short description of the keyboard/project
|
||||
|
||||
|
||||
Keyboard Maintainer: [amnesia0287](https://github.com/amnesia0287)
|
||||
Hardware Supported: TGR-Elaine v1.0 PCB
|
||||
Hardware Availability: http://singakbd.com/
|
||||
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make singa:default
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
|
|
@ -0,0 +1,50 @@
|
|||
# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
||||
#
|
||||
# This program is free software: you can redistribute it and/or modify
|
||||
# it under the terms of the GNU General Public License as published by
|
||||
# the Free Software Foundation, either version 2 of the License, or
|
||||
# (at your option) any later version.
|
||||
#
|
||||
# This program is distributed in the hope that it will be useful,
|
||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
# GNU General Public License for more details.
|
||||
#
|
||||
# You should have received a copy of the GNU General Public License
|
||||
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
# MCU name
|
||||
MCU = atmega32a
|
||||
PROTOCOL = VUSB
|
||||
|
||||
# unsupported features for now
|
||||
NO_UART = yes
|
||||
NO_SUSPEND_POWER_DOWN = yes
|
||||
|
||||
# processor frequency
|
||||
F_CPU = 12000000
|
||||
|
||||
# Bootloader
|
||||
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
||||
# different sizes, comment this out, and the correct address will be loaded
|
||||
# automatically (+60). See bootloader.mk for all options.
|
||||
BOOTLOADER = bootloadHID
|
||||
|
||||
# build options
|
||||
BOOTMAGIC_ENABLE = yes
|
||||
MOUSEKEY_ENABLE = yes
|
||||
EXTRAKEY_ENABLE = yes
|
||||
CONSOLE_ENABLE = yes
|
||||
COMMAND_ENABLE = yes
|
||||
BACKLIGHT_ENABLE = no
|
||||
RGBLIGHT_ENABLE = no
|
||||
RGBLIGHT_CUSTOM_DRIVER = yes
|
||||
|
||||
OPT_DEFS = -DDEBUG_LEVEL=0
|
||||
|
||||
# custom matrix setup
|
||||
CUSTOM_MATRIX = yes
|
||||
SRC = matrix.c i2c.c
|
||||
|
||||
# programming options
|
||||
PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
|
||||
|
|
@ -0,0 +1,44 @@
|
|||
/* Copyright 2018 REPLACE_WITH_YOUR_NAME
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
#include <avr/pgmspace.h>
|
||||
#include "action_layer.h"
|
||||
#include "i2c.h"
|
||||
#include "quantum.h"
|
||||
|
||||
|
||||
// for keyboard subdirectory level init functions
|
||||
// @Override
|
||||
void matrix_init_kb(void) {
|
||||
// call user level keymaps, if any
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
matrix_scan_user();
|
||||
/* Nothing else for now. */
|
||||
}
|
||||
|
||||
__attribute__((weak)) // overridable
|
||||
void matrix_init_user(void) {
|
||||
|
||||
}
|
||||
|
||||
__attribute__((weak)) // overridable
|
||||
void matrix_scan_user(void) {
|
||||
|
||||
}
|
||||
|
|
@ -0,0 +1,143 @@
|
|||
/* Copyright 2018 REPLACE_WITH_YOUR_NAME
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#ifndef SINGA_H
|
||||
#define SINGA_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
// This a shortcut to help you visually see your layout.
|
||||
// The first section contains all of the arguments
|
||||
// The second converts the arguments into a two-dimensional array
|
||||
#define LAYOUT( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, k15, \
|
||||
k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k30, k31, \
|
||||
k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46, \
|
||||
k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60, k61, \
|
||||
k62, k63, k64, k65, k66, k67, k68, k69, k70, k71, k72, k73, k74, k75, k76, \
|
||||
k77, k78, k79, k80, k81, k82, k83, k84, k85, k86, k87, k88, k89, k90 \
|
||||
){ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14 }, \
|
||||
{ k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k30 }, \
|
||||
{ k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, k46 }, \
|
||||
{ k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, k60, k61 }, \
|
||||
{ k62, k63, k64, k65, k66, k67, k68, k69, k70, k71, k72, k73, k74, k75, k76 }, \
|
||||
{ k77, k78, k79, k80, k81, k82, KC_NO, k83, k84, k85, k86, k87, k88, k89, k90 }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k15, k31 } \
|
||||
}
|
||||
|
||||
#define LAYOUT_wkl( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, k15, \
|
||||
k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k30, \
|
||||
k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, \
|
||||
k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, \
|
||||
k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k70, k71, k72, k73, \
|
||||
k74, k75, k76, k77, k78, k79, k80 \
|
||||
){ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14 }, \
|
||||
{ k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, KC_NO }, \
|
||||
{ k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k44, k45 }, \
|
||||
{ k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, KC_NO, k58, k59 }, \
|
||||
{ k60, KC_NO, k61, k62, k63, k64, k65, k66, k67, k68, k69, k70, k71, k72, k73 }, \
|
||||
{ k74, KC_NO, k75, KC_NO, KC_NO, k76, KC_NO, KC_NO, k77, KC_NO, KC_NO, KC_NO, k78, k79, k80 }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k15, k30 } \
|
||||
}
|
||||
|
||||
#define LAYOUT_wkl_split_bs( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, k15, \
|
||||
k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k81, k30, \
|
||||
k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, \
|
||||
k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, \
|
||||
k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k70, k71, k72, k73, \
|
||||
k74, k75, k76, k77, k78, k79, k80 \
|
||||
){ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14 }, \
|
||||
{ k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k81 }, \
|
||||
{ k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k44, k45 }, \
|
||||
{ k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, KC_NO, k58, k59 }, \
|
||||
{ k60, KC_NO, k61, k62, k63, k64, k65, k66, k67, k68, k69, k70, k71, k72, k73 }, \
|
||||
{ k74, KC_NO, k75, KC_NO, KC_NO, k76, KC_NO, KC_NO, k77, KC_NO, KC_NO, KC_NO, k78, k79, k80 }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k15, k30 } \
|
||||
}
|
||||
|
||||
#define LAYOUT_tsangan( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, k15, \
|
||||
k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k30, \
|
||||
k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, \
|
||||
k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, \
|
||||
k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k70, k71, k72, k73, \
|
||||
k74, k81, k75, k76, k77, k78, k79, k80 \
|
||||
){ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14 }, \
|
||||
{ k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, KC_NO }, \
|
||||
{ k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k44, k45 }, \
|
||||
{ k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, KC_NO, k58, k59 }, \
|
||||
{ k60, KC_NO, k61, k62, k63, k64, k65, k66, k67, k68, k69, k70, k71, k72, k73 }, \
|
||||
{ k74, k81, k75, KC_NO, KC_NO, k76, KC_NO, KC_NO, k77, KC_NO, KC_NO, KC_NO, k78, k79, k80 }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k15, k30 } \
|
||||
}
|
||||
|
||||
#define LAYOUT_tsangan_split_bs( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, k15, \
|
||||
k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k82, k30, \
|
||||
k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, \
|
||||
k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, \
|
||||
k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k70, k71, k72, k73, \
|
||||
k74, k81, k75, k76, k77, k78, k79, k80 \
|
||||
){ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14 }, \
|
||||
{ k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k82 }, \
|
||||
{ k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k44, k45 }, \
|
||||
{ k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, KC_NO, k58, k59 }, \
|
||||
{ k60, KC_NO, k61, k62, k63, k64, k65, k66, k67, k68, k69, k70, k71, k72, k73 }, \
|
||||
{ k74, k81, k75, KC_NO, KC_NO, k76, KC_NO, KC_NO, k77, KC_NO, KC_NO, KC_NO, k78, k79, k80 }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k15, k30 } \
|
||||
}
|
||||
|
||||
#define LAYOUT_wk( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, k15, \
|
||||
k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k30, \
|
||||
k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, \
|
||||
k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, \
|
||||
k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k70, k71, k72, k73, \
|
||||
k74, k81, k75, k76, k77, k82, k78, k79, k80 \
|
||||
){ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14 }, \
|
||||
{ k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, KC_NO }, \
|
||||
{ k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k44, k45 }, \
|
||||
{ k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, KC_NO, k58, k59 }, \
|
||||
{ k60, KC_NO, k61, k62, k63, k64, k65, k66, k67, k68, k69, k70, k71, k72, k73 }, \
|
||||
{ k74, k81 , k75, KC_NO, KC_NO, k76, KC_NO, KC_NO, k77, KC_NO, k82, KC_NO, k78, k79, k80 }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k15, k30 } \
|
||||
}
|
||||
|
||||
#define LAYOUT_wk_split_bs( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14, k15, \
|
||||
k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k83, k30, \
|
||||
k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k44, k45, \
|
||||
k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, k58, k59, \
|
||||
k60, k61, k62, k63, k64, k65, k66, k67, k68, k69, k70, k71, k72, k73, \
|
||||
k74, k81, k75, k76, k77, k82, k78, k79, k80 \
|
||||
){ \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k10, k11, k12, k13, k14 }, \
|
||||
{ k16, k17, k18, k19, k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k83 }, \
|
||||
{ k31, k32, k33, k34, k35, k36, k37, k38, k39, k40, k41, k42, k43, k44, k45 }, \
|
||||
{ k46, k47, k48, k49, k50, k51, k52, k53, k54, k55, k56, k57, KC_NO, k58, k59 }, \
|
||||
{ k60, KC_NO, k61, k62, k63, k64, k65, k66, k67, k68, k69, k70, k71, k72, k73 }, \
|
||||
{ k74, k81, k75, KC_NO, KC_NO, k76, KC_NO, KC_NO, k77, KC_NO, k82, KC_NO, k78, k79, k80 }, \
|
||||
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, k15, k30 } \
|
||||
}
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,396 @@
|
|||
/* Name: usbconfig.h
|
||||
* Project: V-USB, virtual USB port for Atmel's(r) AVR(r) microcontrollers
|
||||
* Author: Christian Starkjohann
|
||||
* Creation Date: 2005-04-01
|
||||
* Tabsize: 4
|
||||
* Copyright: (c) 2005 by OBJECTIVE DEVELOPMENT Software GmbH
|
||||
* License: GNU GPL v2 (see License.txt), GNU GPL v3 or proprietary (CommercialLicense.txt)
|
||||
* This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
|
||||
*/
|
||||
|
||||
#ifndef __usbconfig_h_included__
|
||||
#define __usbconfig_h_included__
|
||||
|
||||
#include "config.h"
|
||||
|
||||
/*
|
||||
General Description:
|
||||
This file is an example configuration (with inline documentation) for the USB
|
||||
driver. It configures V-USB for USB D+ connected to Port D bit 2 (which is
|
||||
also hardware interrupt 0 on many devices) and USB D- to Port D bit 4. You may
|
||||
wire the lines to any other port, as long as D+ is also wired to INT0 (or any
|
||||
other hardware interrupt, as long as it is the highest level interrupt, see
|
||||
section at the end of this file).
|
||||
*/
|
||||
|
||||
/* ---------------------------- Hardware Config ---------------------------- */
|
||||
|
||||
#define USB_CFG_IOPORTNAME D
|
||||
/* This is the port where the USB bus is connected. When you configure it to
|
||||
* "B", the registers PORTB, PINB and DDRB will be used.
|
||||
*/
|
||||
#define USB_CFG_DMINUS_BIT 3
|
||||
/* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
|
||||
* This may be any bit in the port.
|
||||
*/
|
||||
#define USB_CFG_DPLUS_BIT 2
|
||||
/* This is the bit number in USB_CFG_IOPORT where the USB D+ line is connected.
|
||||
* This may be any bit in the port. Please note that D+ must also be connected
|
||||
* to interrupt pin INT0! [You can also use other interrupts, see section
|
||||
* "Optional MCU Description" below, or you can connect D- to the interrupt, as
|
||||
* it is required if you use the USB_COUNT_SOF feature. If you use D- for the
|
||||
* interrupt, the USB interrupt will also be triggered at Start-Of-Frame
|
||||
* markers every millisecond.]
|
||||
*/
|
||||
#define USB_CFG_CLOCK_KHZ (F_CPU/1000)
|
||||
/* Clock rate of the AVR in kHz. Legal values are 12000, 12800, 15000, 16000,
|
||||
* 16500, 18000 and 20000. The 12.8 MHz and 16.5 MHz versions of the code
|
||||
* require no crystal, they tolerate +/- 1% deviation from the nominal
|
||||
* frequency. All other rates require a precision of 2000 ppm and thus a
|
||||
* crystal!
|
||||
* Since F_CPU should be defined to your actual clock rate anyway, you should
|
||||
* not need to modify this setting.
|
||||
*/
|
||||
#define USB_CFG_CHECK_CRC 0
|
||||
/* Define this to 1 if you want that the driver checks integrity of incoming
|
||||
* data packets (CRC checks). CRC checks cost quite a bit of code size and are
|
||||
* currently only available for 18 MHz crystal clock. You must choose
|
||||
* USB_CFG_CLOCK_KHZ = 18000 if you enable this option.
|
||||
*/
|
||||
|
||||
/* ----------------------- Optional Hardware Config ------------------------ */
|
||||
|
||||
/* #define USB_CFG_PULLUP_IOPORTNAME D */
|
||||
/* If you connect the 1.5k pullup resistor from D- to a port pin instead of
|
||||
* V+, you can connect and disconnect the device from firmware by calling
|
||||
* the macros usbDeviceConnect() and usbDeviceDisconnect() (see usbdrv.h).
|
||||
* This constant defines the port on which the pullup resistor is connected.
|
||||
*/
|
||||
/* #define USB_CFG_PULLUP_BIT 4 */
|
||||
/* This constant defines the bit number in USB_CFG_PULLUP_IOPORT (defined
|
||||
* above) where the 1.5k pullup resistor is connected. See description
|
||||
* above for details.
|
||||
*/
|
||||
|
||||
/* --------------------------- Functional Range ---------------------------- */
|
||||
|
||||
#define USB_CFG_HAVE_INTRIN_ENDPOINT 1
|
||||
/* Define this to 1 if you want to compile a version with two endpoints: The
|
||||
* default control endpoint 0 and an interrupt-in endpoint (any other endpoint
|
||||
* number).
|
||||
*/
|
||||
#define USB_CFG_HAVE_INTRIN_ENDPOINT3 1
|
||||
/* Define this to 1 if you want to compile a version with three endpoints: The
|
||||
* default control endpoint 0, an interrupt-in endpoint 3 (or the number
|
||||
* configured below) and a catch-all default interrupt-in endpoint as above.
|
||||
* You must also define USB_CFG_HAVE_INTRIN_ENDPOINT to 1 for this feature.
|
||||
*/
|
||||
#define USB_CFG_EP3_NUMBER 3
|
||||
/* If the so-called endpoint 3 is used, it can now be configured to any other
|
||||
* endpoint number (except 0) with this macro. Default if undefined is 3.
|
||||
*/
|
||||
/* #define USB_INITIAL_DATATOKEN USBPID_DATA1 */
|
||||
/* The above macro defines the startup condition for data toggling on the
|
||||
* interrupt/bulk endpoints 1 and 3. Defaults to USBPID_DATA1.
|
||||
* Since the token is toggled BEFORE sending any data, the first packet is
|
||||
* sent with the oposite value of this configuration!
|
||||
*/
|
||||
#define USB_CFG_IMPLEMENT_HALT 0
|
||||
/* Define this to 1 if you also want to implement the ENDPOINT_HALT feature
|
||||
* for endpoint 1 (interrupt endpoint). Although you may not need this feature,
|
||||
* it is required by the standard. We have made it a config option because it
|
||||
* bloats the code considerably.
|
||||
*/
|
||||
#define USB_CFG_SUPPRESS_INTR_CODE 0
|
||||
/* Define this to 1 if you want to declare interrupt-in endpoints, but don't
|
||||
* want to send any data over them. If this macro is defined to 1, functions
|
||||
* usbSetInterrupt() and usbSetInterrupt3() are omitted. This is useful if
|
||||
* you need the interrupt-in endpoints in order to comply to an interface
|
||||
* (e.g. HID), but never want to send any data. This option saves a couple
|
||||
* of bytes in flash memory and the transmit buffers in RAM.
|
||||
*/
|
||||
#define USB_CFG_INTR_POLL_INTERVAL 1
|
||||
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
|
||||
* interval. The value is in milliseconds and must not be less than 10 ms for
|
||||
* low speed devices.
|
||||
*/
|
||||
#define USB_CFG_IS_SELF_POWERED 0
|
||||
/* Define this to 1 if the device has its own power supply. Set it to 0 if the
|
||||
* device is powered from the USB bus.
|
||||
*/
|
||||
#define USB_CFG_MAX_BUS_POWER 500
|
||||
/* Set this variable to the maximum USB bus power consumption of your device.
|
||||
* The value is in milliamperes. [It will be divided by two since USB
|
||||
* communicates power requirements in units of 2 mA.]
|
||||
*/
|
||||
#define USB_CFG_IMPLEMENT_FN_WRITE 1
|
||||
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out
|
||||
* transfers. Set it to 0 if you don't need it and want to save a couple of
|
||||
* bytes.
|
||||
*/
|
||||
#define USB_CFG_IMPLEMENT_FN_READ 0
|
||||
/* Set this to 1 if you need to send control replies which are generated
|
||||
* "on the fly" when usbFunctionRead() is called. If you only want to send
|
||||
* data from a static buffer, set it to 0 and return the data from
|
||||
* usbFunctionSetup(). This saves a couple of bytes.
|
||||
*/
|
||||
#define USB_CFG_IMPLEMENT_FN_WRITEOUT 0
|
||||
/* Define this to 1 if you want to use interrupt-out (or bulk out) endpoints.
|
||||
* You must implement the function usbFunctionWriteOut() which receives all
|
||||
* interrupt/bulk data sent to any endpoint other than 0. The endpoint number
|
||||
* can be found in 'usbRxToken'.
|
||||
*/
|
||||
#define USB_CFG_HAVE_FLOWCONTROL 0
|
||||
/* Define this to 1 if you want flowcontrol over USB data. See the definition
|
||||
* of the macros usbDisableAllRequests() and usbEnableAllRequests() in
|
||||
* usbdrv.h.
|
||||
*/
|
||||
#define USB_CFG_DRIVER_FLASH_PAGE 0
|
||||
/* If the device has more than 64 kBytes of flash, define this to the 64 k page
|
||||
* where the driver's constants (descriptors) are located. Or in other words:
|
||||
* Define this to 1 for boot loaders on the ATMega128.
|
||||
*/
|
||||
#define USB_CFG_LONG_TRANSFERS 0
|
||||
/* Define this to 1 if you want to send/receive blocks of more than 254 bytes
|
||||
* in a single control-in or control-out transfer. Note that the capability
|
||||
* for long transfers increases the driver size.
|
||||
*/
|
||||
/* #define USB_RX_USER_HOOK(data, len) if(usbRxToken == (uchar)USBPID_SETUP) blinkLED(); */
|
||||
/* This macro is a hook if you want to do unconventional things. If it is
|
||||
* defined, it's inserted at the beginning of received message processing.
|
||||
* If you eat the received message and don't want default processing to
|
||||
* proceed, do a return after doing your things. One possible application
|
||||
* (besides debugging) is to flash a status LED on each packet.
|
||||
*/
|
||||
/* #define USB_RESET_HOOK(resetStarts) if(!resetStarts){hadUsbReset();} */
|
||||
/* This macro is a hook if you need to know when an USB RESET occurs. It has
|
||||
* one parameter which distinguishes between the start of RESET state and its
|
||||
* end.
|
||||
*/
|
||||
/* #define USB_SET_ADDRESS_HOOK() hadAddressAssigned(); */
|
||||
/* This macro (if defined) is executed when a USB SET_ADDRESS request was
|
||||
* received.
|
||||
*/
|
||||
#define USB_COUNT_SOF 1
|
||||
/* define this macro to 1 if you need the global variable "usbSofCount" which
|
||||
* counts SOF packets. This feature requires that the hardware interrupt is
|
||||
* connected to D- instead of D+.
|
||||
*/
|
||||
/* #ifdef __ASSEMBLER__
|
||||
* macro myAssemblerMacro
|
||||
* in YL, TCNT0
|
||||
* sts timer0Snapshot, YL
|
||||
* endm
|
||||
* #endif
|
||||
* #define USB_SOF_HOOK myAssemblerMacro
|
||||
* This macro (if defined) is executed in the assembler module when a
|
||||
* Start Of Frame condition is detected. It is recommended to define it to
|
||||
* the name of an assembler macro which is defined here as well so that more
|
||||
* than one assembler instruction can be used. The macro may use the register
|
||||
* YL and modify SREG. If it lasts longer than a couple of cycles, USB messages
|
||||
* immediately after an SOF pulse may be lost and must be retried by the host.
|
||||
* What can you do with this hook? Since the SOF signal occurs exactly every
|
||||
* 1 ms (unless the host is in sleep mode), you can use it to tune OSCCAL in
|
||||
* designs running on the internal RC oscillator.
|
||||
* Please note that Start Of Frame detection works only if D- is wired to the
|
||||
* interrupt, not D+. THIS IS DIFFERENT THAN MOST EXAMPLES!
|
||||
*/
|
||||
#define USB_CFG_CHECK_DATA_TOGGLING 0
|
||||
/* define this macro to 1 if you want to filter out duplicate data packets
|
||||
* sent by the host. Duplicates occur only as a consequence of communication
|
||||
* errors, when the host does not receive an ACK. Please note that you need to
|
||||
* implement the filtering yourself in usbFunctionWriteOut() and
|
||||
* usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
|
||||
* for each control- and out-endpoint to check for duplicate packets.
|
||||
*/
|
||||
#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH 0
|
||||
/* define this macro to 1 if you want the function usbMeasureFrameLength()
|
||||
* compiled in. This function can be used to calibrate the AVR's RC oscillator.
|
||||
*/
|
||||
#define USB_USE_FAST_CRC 0
|
||||
/* The assembler module has two implementations for the CRC algorithm. One is
|
||||
* faster, the other is smaller. This CRC routine is only used for transmitted
|
||||
* messages where timing is not critical. The faster routine needs 31 cycles
|
||||
* per byte while the smaller one needs 61 to 69 cycles. The faster routine
|
||||
* may be worth the 32 bytes bigger code size if you transmit lots of data and
|
||||
* run the AVR close to its limit.
|
||||
*/
|
||||
|
||||
/* -------------------------- Device Description --------------------------- */
|
||||
|
||||
#define USB_CFG_VENDOR_ID (VENDOR_ID & 0xFF), ((VENDOR_ID >> 8) & 0xFF)
|
||||
/* USB vendor ID for the device, low byte first. If you have registered your
|
||||
* own Vendor ID, define it here. Otherwise you may use one of obdev's free
|
||||
* shared VID/PID pairs. Be sure to read USB-IDs-for-free.txt for rules!
|
||||
* *** IMPORTANT NOTE ***
|
||||
* This template uses obdev's shared VID/PID pair for Vendor Class devices
|
||||
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
|
||||
* the implications!
|
||||
*/
|
||||
#define USB_CFG_DEVICE_ID (PRODUCT_ID & 0xFF), ((PRODUCT_ID >> 8) & 0xFF)
|
||||
/* This is the ID of the product, low byte first. It is interpreted in the
|
||||
* scope of the vendor ID. If you have registered your own VID with usb.org
|
||||
* or if you have licensed a PID from somebody else, define it here. Otherwise
|
||||
* you may use one of obdev's free shared VID/PID pairs. See the file
|
||||
* USB-IDs-for-free.txt for details!
|
||||
* *** IMPORTANT NOTE ***
|
||||
* This template uses obdev's shared VID/PID pair for Vendor Class devices
|
||||
* with libusb: 0x16c0/0x5dc. Use this VID/PID pair ONLY if you understand
|
||||
* the implications!
|
||||
*/
|
||||
#define USB_CFG_DEVICE_VERSION 0x00, 0x02
|
||||
/* Version number of the device: Minor number first, then major number.
|
||||
*/
|
||||
#define USB_CFG_VENDOR_NAME 'w', 'i', 'n', 'k', 'e', 'y', 'l', 'e', 's', 's', '.', 'k', 'r'
|
||||
#define USB_CFG_VENDOR_NAME_LEN 13
|
||||
/* These two values define the vendor name returned by the USB device. The name
|
||||
* must be given as a list of characters under single quotes. The characters
|
||||
* are interpreted as Unicode (UTF-16) entities.
|
||||
* If you don't want a vendor name string, undefine these macros.
|
||||
* ALWAYS define a vendor name containing your Internet domain name if you use
|
||||
* obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
|
||||
* details.
|
||||
*/
|
||||
#define USB_CFG_DEVICE_NAME 'p', 's', '2', 'a', 'v', 'r', 'G', 'B'
|
||||
#define USB_CFG_DEVICE_NAME_LEN 8
|
||||
/* Same as above for the device name. If you don't want a device name, undefine
|
||||
* the macros. See the file USB-IDs-for-free.txt before you assign a name if
|
||||
* you use a shared VID/PID.
|
||||
*/
|
||||
/*#define USB_CFG_SERIAL_NUMBER 'N', 'o', 'n', 'e' */
|
||||
/*#define USB_CFG_SERIAL_NUMBER_LEN 0 */
|
||||
/* Same as above for the serial number. If you don't want a serial number,
|
||||
* undefine the macros.
|
||||
* It may be useful to provide the serial number through other means than at
|
||||
* compile time. See the section about descriptor properties below for how
|
||||
* to fine tune control over USB descriptors such as the string descriptor
|
||||
* for the serial number.
|
||||
*/
|
||||
#define USB_CFG_DEVICE_CLASS 0
|
||||
#define USB_CFG_DEVICE_SUBCLASS 0
|
||||
/* See USB specification if you want to conform to an existing device class.
|
||||
* Class 0xff is "vendor specific".
|
||||
*/
|
||||
#define USB_CFG_INTERFACE_CLASS 3 /* HID */
|
||||
#define USB_CFG_INTERFACE_SUBCLASS 1 /* Boot */
|
||||
#define USB_CFG_INTERFACE_PROTOCOL 1 /* Keyboard */
|
||||
/* See USB specification if you want to conform to an existing device class or
|
||||
* protocol. The following classes must be set at interface level:
|
||||
* HID class is 3, no subclass and protocol required (but may be useful!)
|
||||
* CDC class is 2, use subclass 2 and protocol 1 for ACM
|
||||
*/
|
||||
#define USB_CFG_HID_REPORT_DESCRIPTOR_LENGTH 0
|
||||
/* Define this to the length of the HID report descriptor, if you implement
|
||||
* an HID device. Otherwise don't define it or define it to 0.
|
||||
* If you use this define, you must add a PROGMEM character array named
|
||||
* "usbHidReportDescriptor" to your code which contains the report descriptor.
|
||||
* Don't forget to keep the array and this define in sync!
|
||||
*/
|
||||
|
||||
/* #define USB_PUBLIC static */
|
||||
/* Use the define above if you #include usbdrv.c instead of linking against it.
|
||||
* This technique saves a couple of bytes in flash memory.
|
||||
*/
|
||||
|
||||
/* ------------------- Fine Control over USB Descriptors ------------------- */
|
||||
/* If you don't want to use the driver's default USB descriptors, you can
|
||||
* provide our own. These can be provided as (1) fixed length static data in
|
||||
* flash memory, (2) fixed length static data in RAM or (3) dynamically at
|
||||
* runtime in the function usbFunctionDescriptor(). See usbdrv.h for more
|
||||
* information about this function.
|
||||
* Descriptor handling is configured through the descriptor's properties. If
|
||||
* no properties are defined or if they are 0, the default descriptor is used.
|
||||
* Possible properties are:
|
||||
* + USB_PROP_IS_DYNAMIC: The data for the descriptor should be fetched
|
||||
* at runtime via usbFunctionDescriptor(). If the usbMsgPtr mechanism is
|
||||
* used, the data is in FLASH by default. Add property USB_PROP_IS_RAM if
|
||||
* you want RAM pointers.
|
||||
* + USB_PROP_IS_RAM: The data returned by usbFunctionDescriptor() or found
|
||||
* in static memory is in RAM, not in flash memory.
|
||||
* + USB_PROP_LENGTH(len): If the data is in static memory (RAM or flash),
|
||||
* the driver must know the descriptor's length. The descriptor itself is
|
||||
* found at the address of a well known identifier (see below).
|
||||
* List of static descriptor names (must be declared PROGMEM if in flash):
|
||||
* char usbDescriptorDevice[];
|
||||
* char usbDescriptorConfiguration[];
|
||||
* char usbDescriptorHidReport[];
|
||||
* char usbDescriptorString0[];
|
||||
* int usbDescriptorStringVendor[];
|
||||
* int usbDescriptorStringDevice[];
|
||||
* int usbDescriptorStringSerialNumber[];
|
||||
* Other descriptors can't be provided statically, they must be provided
|
||||
* dynamically at runtime.
|
||||
*
|
||||
* Descriptor properties are or-ed or added together, e.g.:
|
||||
* #define USB_CFG_DESCR_PROPS_DEVICE (USB_PROP_IS_RAM | USB_PROP_LENGTH(18))
|
||||
*
|
||||
* The following descriptors are defined:
|
||||
* USB_CFG_DESCR_PROPS_DEVICE
|
||||
* USB_CFG_DESCR_PROPS_CONFIGURATION
|
||||
* USB_CFG_DESCR_PROPS_STRINGS
|
||||
* USB_CFG_DESCR_PROPS_STRING_0
|
||||
* USB_CFG_DESCR_PROPS_STRING_VENDOR
|
||||
* USB_CFG_DESCR_PROPS_STRING_PRODUCT
|
||||
* USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER
|
||||
* USB_CFG_DESCR_PROPS_HID
|
||||
* USB_CFG_DESCR_PROPS_HID_REPORT
|
||||
* USB_CFG_DESCR_PROPS_UNKNOWN (for all descriptors not handled by the driver)
|
||||
*
|
||||
* Note about string descriptors: String descriptors are not just strings, they
|
||||
* are Unicode strings prefixed with a 2 byte header. Example:
|
||||
* int serialNumberDescriptor[] = {
|
||||
* USB_STRING_DESCRIPTOR_HEADER(6),
|
||||
* 'S', 'e', 'r', 'i', 'a', 'l'
|
||||
* };
|
||||
*/
|
||||
|
||||
#define USB_CFG_DESCR_PROPS_DEVICE 0
|
||||
#define USB_CFG_DESCR_PROPS_CONFIGURATION USB_PROP_IS_DYNAMIC
|
||||
//#define USB_CFG_DESCR_PROPS_CONFIGURATION 0
|
||||
#define USB_CFG_DESCR_PROPS_STRINGS 0
|
||||
#define USB_CFG_DESCR_PROPS_STRING_0 0
|
||||
#define USB_CFG_DESCR_PROPS_STRING_VENDOR 0
|
||||
#define USB_CFG_DESCR_PROPS_STRING_PRODUCT 0
|
||||
#define USB_CFG_DESCR_PROPS_STRING_SERIAL_NUMBER 0
|
||||
#define USB_CFG_DESCR_PROPS_HID USB_PROP_IS_DYNAMIC
|
||||
//#define USB_CFG_DESCR_PROPS_HID 0
|
||||
#define USB_CFG_DESCR_PROPS_HID_REPORT USB_PROP_IS_DYNAMIC
|
||||
//#define USB_CFG_DESCR_PROPS_HID_REPORT 0
|
||||
#define USB_CFG_DESCR_PROPS_UNKNOWN 0
|
||||
|
||||
#define usbMsgPtr_t unsigned short
|
||||
/* If usbMsgPtr_t is not defined, it defaults to 'uchar *'. We define it to
|
||||
* a scalar type here because gcc generates slightly shorter code for scalar
|
||||
* arithmetics than for pointer arithmetics. Remove this define for backward
|
||||
* type compatibility or define it to an 8 bit type if you use data in RAM only
|
||||
* and all RAM is below 256 bytes (tiny memory model in IAR CC).
|
||||
*/
|
||||
|
||||
/* ----------------------- Optional MCU Description ------------------------ */
|
||||
|
||||
/* The following configurations have working defaults in usbdrv.h. You
|
||||
* usually don't need to set them explicitly. Only if you want to run
|
||||
* the driver on a device which is not yet supported or with a compiler
|
||||
* which is not fully supported (such as IAR C) or if you use a differnt
|
||||
* interrupt than INT0, you may have to define some of these.
|
||||
*/
|
||||
/* #define USB_INTR_CFG MCUCR */
|
||||
/* #define USB_INTR_CFG_SET ((1 << ISC00) | (1 << ISC01)) */
|
||||
/* #define USB_INTR_CFG_CLR 0 */
|
||||
/* #define USB_INTR_ENABLE GIMSK */
|
||||
/* #define USB_INTR_ENABLE_BIT INT0 */
|
||||
/* #define USB_INTR_PENDING GIFR */
|
||||
/* #define USB_INTR_PENDING_BIT INTF0 */
|
||||
/* #define USB_INTR_VECTOR INT0_vect */
|
||||
|
||||
/* Set INT1 for D- falling edge to count SOF */
|
||||
/* #define USB_INTR_CFG EICRA */
|
||||
#define USB_INTR_CFG_SET ((1 << ISC11) | (0 << ISC10))
|
||||
/* #define USB_INTR_CFG_CLR 0 */
|
||||
/* #define USB_INTR_ENABLE EIMSK */
|
||||
#define USB_INTR_ENABLE_BIT INT1
|
||||
/* #define USB_INTR_PENDING EIFR */
|
||||
#define USB_INTR_PENDING_BIT INTF1
|
||||
#define USB_INTR_VECTOR INT1_vect
|
||||
|
||||
#endif /* __usbconfig_h_included__ */
|
||||
Loading…
Reference in New Issue