Merge remote-tracking branch 'origin/master' into develop

master
QMK Bot 2021-07-20 04:05:10 +00:00
commit 9c5a0fb0b2
11 changed files with 404 additions and 0 deletions

View File

@ -0,0 +1,121 @@
/*
Copyright 2020 Boardsource
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x4273
#define PRODUCT_ID 0x0083
#define DEVICE_VER 0x0001
#define MANUFACTURER Boardsource
#define PRODUCT Technik-S
/* key matrix size */
#define MATRIX_ROWS 4
#define MATRIX_COLS 12
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS {B0, B1, B2, B3}
#define MATRIX_COL_PINS {B5, B6, B7, F5, C7, D0, D1, D2, D3, D4, D5, D6}
#define UNUSED_PINS
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
//#define BACKLIGHT_PIN B7
//#define BACKLIGHT_LEVELS 3
#define BACKLIGHT_BREATHING
#define RGBLIGHT_ANIMATIONS
#define RGB_DI_PIN C6
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 120
#ifdef RGBLIGHT_ENABLE
#define RGBLED_NUM 10 // Number of LEDs
#endif
#define DRIVER_LED_TOTAL 55
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
*/
//#define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
/* Bootmagic Lite key configuration */
//#define BOOTMAGIC_LITE_ROW 0
//#define BOOTMAGIC_LITE_COLUMN 0

View File

@ -0,0 +1,58 @@
{
"keyboard_name": "Technik-S",
"url": "",
"maintainer": "Boardsource",
"width": 12,
"height": 4,
"layouts": {
"LAYOUT": {
"layout": [
{ "label": "1", "x": 0, "y": 0 },
{ "label": "2", "x": 1, "y": 0 },
{ "label": "3", "x": 2, "y": 0 },
{ "label": "4", "x": 3, "y": 0 },
{ "label": "5", "x": 4, "y": 0 },
{ "label": "6", "x": 5, "y": 0 },
{ "label": "7", "x": 6, "y": 0 },
{ "label": "8", "x": 7, "y": 0 },
{ "label": "9", "x": 8, "y": 0 },
{ "label": "10", "x": 9, "y": 0 },
{ "label": "11", "x": 10, "y": 0 },
{ "label": "12", "x": 11, "y": 0 },
{ "label": "13", "x": 0, "y": 1, "w": 1.5 },
{ "label": "14", "x": 1.5, "y": 1 },
{ "label": "15", "x": 2.5, "y": 1 },
{ "label": "16", "x": 3.5, "y": 1 },
{ "label": "17", "x": 4.5, "y": 1 },
{ "label": "18", "x": 5.5, "y": 1 },
{ "label": "19", "x": 6.5, "y": 1 },
{ "label": "20", "x": 7.5, "y": 1 },
{ "label": "21", "x": 8.5, "y": 1 },
{ "label": "22", "x": 9.5, "y": 1 },
{ "label": "23", "x": 10.5, "y": 1, "w": 1.5 },
{ "label": "24", "x": 0, "y": 2 },
{ "label": "25", "x": 1, "y": 2 },
{ "label": "26", "x": 2, "y": 2 },
{ "label": "27", "x": 3, "y": 2 },
{ "label": "28", "x": 4, "y": 2 },
{ "label": "29", "x": 5, "y": 2 },
{ "label": "30", "x": 6, "y": 2 },
{ "label": "31", "x": 7, "y": 2 },
{ "label": "32", "x": 8, "y": 2 },
{ "label": "33", "x": 9, "y": 2 },
{ "label": "34", "x": 10, "y": 2 },
{ "label": "35", "x": 11, "y": 2 },
{ "label": "36", "x": 0, "y": 3 },
{ "label": "37", "x": 1, "y": 3 },
{ "label": "38", "x": 2, "y": 3 },
{ "label": "39", "x": 3, "y": 3, "w": 1.5 },
{ "label": "40", "x": 4.5, "y": 3, "w": 1.5 },
{ "label": "41", "x": 6, "y": 3, "w": 1.5 },
{ "label": "42", "x": 7.5, "y": 3, "w": 1.5 },
{ "label": "43", "x": 9, "y": 3 },
{ "label": "44", "x": 10, "y": 3 },
{ "label": "45", "x": 11, "y": 3 }
]
}
}
}

View File

@ -0,0 +1,53 @@
/* Copyright 2020 Boardsource
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
enum layers {
_MAIN,
_RAISE,
_LOWER,
};
// Readability keycodes
#define LOWER MO(_LOWER)
#define RAISE MO(_RAISE)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_MAIN] = LAYOUT(
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,
KC_LSHIFT,KC_LSHIFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_UP, KC_ENT ,
RGB_TOG, KC_LCTL, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_RIGHT
),
[_RAISE] = LAYOUT(
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR,
RGB_MOD, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______,
RESET, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD
),
[_LOWER] = LAYOUT(
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC,
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD
)
};

View File

@ -0,0 +1 @@
# The default keymap for Technik-S

View File

@ -0,0 +1,53 @@
/* Copyright 2020 Boardsource
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
enum layers {
_MAIN,
_RAISE,
_LOWER,
};
// Readability keycodes
#define LOWER MO(_LOWER)
#define RAISE MO(_RAISE)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_MAIN] = LAYOUT(
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,
KC_LSHIFT,KC_LSHIFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_UP, KC_ENT ,
RGB_TOG, KC_LCTL, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_RIGHT
),
[_RAISE] = LAYOUT(
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC,
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR,
RGB_MOD, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______,
RESET, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD
),
[_LOWER] = LAYOUT(
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_BSPC,
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC,
_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, KC_PGUP, KC_PGDN, _______,
_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD
)
};

View File

@ -0,0 +1 @@
# The via keymap for Technik-S

View File

@ -0,0 +1 @@
VIA_ENABLE = yes

View File

@ -0,0 +1,22 @@
# Technik-S
![Technik-S](https://i.imgur.com/0QLgu5V.jpeg)
The technik-s is a 40% staggard keyboard that is designed to fit in the same case as the technik-o a 4x12 ortho
* Keyboard Maintainer: [Boardsource](https://github.com/boardsource)
* Hardware Supported: V1 pcb
* Hardware Availability: [boardsource](https://boardsource.xyz/store/5ffb9b01edd0447f8023fdb2)
Make example for this keyboard (after setting up your build environment):
make boardsource/technik_s:default
Flashing example for this keyboard:
make boardsource/technik_s:default:flash
Reset keyboard by pushing reset button on back of pcb through access hole. Or hold down top left key while you plug in the usb cable.
Then run this command in your local qmk repo, or flash using qmk toolbox.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -0,0 +1,25 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = no # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
RGB_MATRIX_ENABLE = yes
RGB_MATRIX_DRIVER = WS2812
LTO_ENABLE = yes

View File

@ -0,0 +1,38 @@
/* Copyright 2020 Boardsource
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "technik_s.h"
#ifdef RGB_MATRIX_ENABLE
led_config_t g_led_config = { {
{11,12,13,14,15,16,17,18,19,20,21,22},
{23,24,25,26,27,28,29,30,31,32,33},
{34,35,36,37,38,39,40,41,42,43,44,45},
{46,47,48,49,50,51,52,53,54,55}
}, {
{11, 0}, {10, 0}, {9, 0}, {8, 0}, {7, 0}, {6, 0}, {5, 0}, {4, 0}, {3, 0}, {2, 0}, {1, 0}, {0, 0},
{10.5, 1}, {9.5, 1}, {8.5, 1}, {7.5, 1}, {6.5, 1}, {5.5, 1}, {4.5, 1}, {3.5, 1}, {2.5, 1}, {1.5, 1}, {0.5, 1},
{11, 2}, {10, 2}, {9, 2}, {8, 2}, {7, 2}, {6, 2}, {5, 2}, {4, 2}, {3, 2}, {2, 2}, {1, 2}, {0, 2},
{11, 3}, {10, 3}, {9, 3}, {8, 3}, {6.5, 3}, {5, 3}, {3.5, 3}, {2, 3}, {1, 3}, {0, 3},
}, {
2, 2, 2, 2, 2, 2, 2, 2, 2, 2,
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
1, 1, 4, 4, 4, 4, 4, 4, 4, 4, 4, 1,
1, 1, 1, 1, 4, 4, 1, 1, 1, 1
} };
#endif

View File

@ -0,0 +1,31 @@
/* Copyright 2020 Boardsource
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
#define LAYOUT( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11, \
K12, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23, \
K24, K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, K35, \
K36, K37, K38, K39, K40, K41, K42, K43, K44, K45 \
) { \
{K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K10, K11}, \
{K12, KC_NO, K14, K15, K16, K17, K18, K19, K20, K21, K22, K23}, \
{K24, K25, K26, K27, K28, K29, K30, K31, K32, K33, K34, K35}, \
{K36, K37, K38, K39,KC_NO,K40, K41,KC_NO,K42, K43, K44, K45} \
}