add HHKB docs and pics.

master
tmk 2010-10-10 22:12:54 +09:00
parent c696c95c60
commit 99bba8d949
12 changed files with 230 additions and 0 deletions

230
HHKB/HHKB.txt 100644
View File

@ -0,0 +1,230 @@
Alternative Controller for HHKB pro
===================================
I want to add vi cursor and mouse keys to HHKB. Original HHKB controller is not programmable and
firmware source code is not open. So, customizing HHKB needs to replace original controller with programmable one.
I used Teensy++ as alternative controller. Though a Teensy has enough ports to drive HHKB,
Teensy++ has clean pinout and it makes programing and wiring easier.
This is just a proof of concept for replacing controller of HHKB, not a complete firmware.
My prototype firmware source tree is here:
branch: hhkb(http://github.com/tmk/tmk_keyboard/tree/hhkb)
This firmware is a port of my previous project:
HHKB style Mod(http://geekhack.org/showwiki.php?title=Island:11930)
PJRC(Teensy++/Teensy)
http://www.pjrc.com/teensy/
Pros:
* without pattern cuting, case mod and soldering
* can keep original controller intact
* can change HHKB behaviour as you like(by C programming)
Cons:
* void your warranty
* unavailability of Teensy++/Teensy(because of PS3 cracking boom?)
Features:
* customized keymap
* more keymap layers
* mouse keys for minimum mouse operation(never comfortable for normal use)
* and more...(in the future)
Any suggestions or ideas are welcome.
NOTE:
My HHKB is just "Professional". This means followings may not be applied to "Professional2".
DISCLAIMER:
I'm not a professional for electronics and MCU programming. This may damage your HHKB.
And my English writing is poor, I'm not sure I can convey my notions accurately.
Teensy++ installation
---------------------
Angled USB mini B adapter is used to install Teensy++ laterally.
(teensy_install.jpg)
Bread baord cables used for connect Teensy++.
(teensy_wiring.jpg)
(connector_contact.jpg)
HHKB internal
-------------
HHKB pro has two PCBs and some chips.
Controller PCB:
M38K07M4 Renesas MCU with USB function
http://documentation.renesas.com/eng/products/mpumcu/rej03b0192_38k0ds.pdf
(HHKB_controller.jpg)
Keyswitch PCB:
HC4051 Analog Multiplexer: select a row line.
http://www.alldatasheet.com/datasheet-pdf/pdf/203989/KODENSHI/KK74HC4051A.html
LS145 BCD Decoder: select a column line.
http://www.alldatasheet.com/datasheet-pdf/pdf/27373/TI/SN74LS145D.html
BU9831 Non-volatile electronic potentiometer: for calibration?
http://www.alldatasheet.com/datasheet-pdf/pdf/36387/ROHM/BU9831.html
TP1684 Capacitive Sensing controller: no datasheet available.
(HHKB_keyswitch.jpg)
Topre original chip?
(HHKB_TP1684.jpg)
Two PCBs are connected by 15 lines. Vcc/GND uses 3 lines each, 9lines for keyboard signaling.
Keyswitch PCB connector Teensy++ pins
-------------------------------------------------------------------------------
1 Vcc(5V) 5V
2 Vcc(5V)
3 Vcc(5V)
4 TP1684 KEY: Low(0) when key pressed PE6 input w/o pullup
5 TP1684 unknown:how to use PE7 input w/o pullup
6 HC4051 A(bit0) select 8 rows(0 to 7) PB0 output
7 HC4051 B(bit1) PB1 output
8 HC4051 C(bit2) PB2 output
9 LS145 A(bit0) select 8 columns(0 to 7) PB3 output
10 LS145 B(bit1) PB4 output
11 LS145 C(bit2) PB5 output
12 LS145 D(enable) Low(0) enable selected column PB6 output
13 GND
14 GND
15 GND GND
(HHKB_connector.jpg)
Keyswitch matrix
----------------
60 keyswitches in 8*8 matrix. ghost free. bounce free.
COL 0 1 2 3 4 5 6 7
ROW ---------------------------------------------------------------
0| 2 q w s a z x c
1| 3 4 r e d f v b
2| 5 6 y t g h n _NONE_
3| 1 Esc Tab Control LShift LAlt LMeta Space
4| 7 8 u i k j m _NONE_
5| \ ` Delete Return Fn RShift RAlt RMeta
6| 9 0 o p ; l , _NONE_
7| - + ] [ ' / . _NONE_
Matrix diagram:
+-------------------------+-+-+-+-+-+-+-+ Vcc
|bias control? - - - - - - - - ---
| 3.9K*8 R R R R R R R R |
+--------^+ +--------+ - - - - - - - - |
| TP 1684 | | HC4051 <0-------|-|-|-|-|-|-|-|--|R|-+
| |capa. | <1-------|-|-|-|-|-|-|-|--|R|-+
| |sense | <2-------|-|-|-|-|-|-|-|--|R|-+
| <------| <3-------|-|-|-|-|-|-|-|--|R|-+
| | | <4-------|-|-|-|-|-|-|-|--|R|-+
| | | <5-------|-|-|-|-|-|-|-|--|R|-+
| |calib.| <6-------|-|-|-|-|-|-|-|--|R|-+
| <-+? | <7-------|-|-|-|-|-|-|-|--|R|-+
+---V-----+ | +-^-^-^--+ 0 1 2 3 4 5 6 7 33K*8
KEY ??? | A B C +-----------------+
| | +-^----+ | | | | LS145 |
Vcc | | |BU9831| | | | +-^--^--^--^------+
--- | | +------+ | | | A B C D +------+
| | | | | | | | | | | |
1-3 4 5 6 7 8 9 10 11 12 13-15 |
+--------------------------------------------------+ |
| connector | ---
+--------------------------------------------------+ GND
to controller
Signals charts:
While pressing space bar, watched HHKB original controller signals by logic analyzer.
Row and column is looping between 0-7 each for selecting a key.
A key is scaned every about 15ms, so scan rate is 66Hz.
(HHKB_chart1.jpg)
Space bar locate at ROW:3 COL:7. Key are selected by HC4051(C,B,A) and LS145(C,B,A).
Key state can be read on TP1684(4/KEY) while asserting low on LS145(D).
Usage of TP1684(5) is unknown. Key state can be read without using this signal.
(HHKB_chart2.jpg)
Matrix scan pseudo code:
for (row: 0-7) {
SELECT_ROW(row); // set HC4051(A,B,C)
for (col: 0-7) {
SELECT_COL(col); // set LS145(A,B,C)
_delay_us(50);
ENALBLE_COL(); // set LS145(D) to low
_delay_us(10);
if (KEY == 0) { // read TP1684(KEY)
// key pressed
} else {
// not pressed
}
}
}
Keymap layers
-------------
Followings are added layers with additional Fn keys. They are not final decision.
Layer0(Default Layer):
,-----------------------------------------------------------.
|Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| `|
|-----------------------------------------------------------|
|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Backs|
|-----------------------------------------------------------|
|Contro| A| S| D| F| G| H| J| K| L| ;| '|Return |
|-----------------------------------------------------------|
|Shift | Z| X| C| V| B| N| M| ,| .| /|Fn2 |Fn1|
`-----------------------------------------------------------'
|Gui|Alt |Space |Fn3 |Gui|
`-------------------------------------------'
Layer1(Fn1) HHKB mode:
,-----------------------------------------------------------.
|Pow| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Ins|Del|
|-----------------------------------------------------------|
|Caps | | | | | | | |Psc|Slk|Pus|Up | |Backs|
|-----------------------------------------------------------|
|Contro|VoD|VoU|Mut| | | *| /|Hom|PgU|Lef|Rig|Enter |
|-----------------------------------------------------------|
|Shift | | | | | | +| -|End|PgD|Dow|Shift |xxx|
`-----------------------------------------------------------'
|Gui |Alt |Space |Alt |Gui|
`--------------------------------------------'
Layer2(Fn2) mouse mode:
,-----------------------------------------------------------.
|Esc| | | | | | | | | | | | | | |
|-----------------------------------------------------------|
|Tab | | | | | | | | | | | | |Backs|
|-----------------------------------------------------------|
|Contro| | | | | | | |MwL|MwD|MwU|MwR|Return |
|-----------------------------------------------------------|
|Shift | | | | | | |McL|McD|McU|McR|xxxxxx| |
`-----------------------------------------------------------'
|Gui |Alt |Mb1 |Mb1 |Mb2|
`--------------------------------------------'
Layer3(Fn3) vi mode:
,-----------------------------------------------------------.
|Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12| | |
|-----------------------------------------------------------|
|Tab | | | | | |Hom|PgD|PgUlEnd| |MwD|MwU|Backs|
|-----------------------------------------------------------|
|Contro| | | | | |Lef|Dow|Up |Rig| | |Return |
|-----------------------------------------------------------|
|Shift | | | | | | |McL|McD|McU|McR|Mb1 | |
`-----------------------------------------------------------'
|Gui|Alt |Mb1 |xxxxx|Mb2|
`-------------------------------------------'
Mc: Mouse Cursor / Mb: Mouse Button / Mw: Mouse Wheel
EOF

Binary file not shown.

After

Width:  |  Height:  |  Size: 146 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 152 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 145 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 189 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 132 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 168 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 188 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 166 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 204 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 133 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 151 KiB