Add support for key backlighting to bfake

If BACKLIGHT_ENABLE is set to `yes` in `rules.mk`, then the user
can use the `BL_*` keycodes to adjust the backlight. At the moment,
only on/off is supported.
master
Chris Lee 2017-12-02 03:26:49 -07:00 committed by Jack Humbert
parent 38ab86e8f2
commit 9584db055b
3 changed files with 26 additions and 4 deletions

View File

@ -16,7 +16,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "bfake.h"
#ifdef BACKLIGHT_ENABLE
#include "backlight.h"
#endif
#ifdef RGBLIGHT_ENABLE
#include "rgblight.h"
#endif
#include <avr/pgmspace.h>
@ -24,6 +29,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#include "i2c.h"
#include "quantum.h"
#ifdef RGBLIGHT_ENABLE
extern rgblight_config_t rgblight_config;
void rgblight_set(void) {
@ -38,8 +44,23 @@ void rgblight_set(void) {
i2c_init();
i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
}
#endif
__attribute__ ((weak))
void matrix_scan_user(void) {
rgblight_task();
}
void backlight_init_ports(void) {
DDRD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
}
void backlight_set(uint8_t level) {
if (level == 0) {
// Turn out the lights
PORTD &= ~(1<<0 | 1<<1 | 1<<4 | 1<<6);
} else {
// Turn on the lights
PORTD |= (1<<0 | 1<<1 | 1<<4 | 1<<6);
}
}

View File

@ -37,7 +37,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DIODE_DIRECTION COL2ROW
#define DEBOUNCING_DELAY 5
#define NO_BACKLIGHT_CLOCK
#define BACKLIGHT_LEVELS 1
#define RGBLIGHT_ANIMATIONS
#define NO_UART 1

View File

@ -37,7 +37,7 @@ EXTRAKEY_ENABLE = yes
CONSOLE_ENABLE = yes
COMMAND_ENABLE = yes
BACKLIGHT_ENABLE = no
RGBLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = no
RGBLIGHT_CUSTOM_DRIVER = yes
OPT_DEFS = -DDEBUG_LEVEL=0
@ -47,4 +47,4 @@ CUSTOM_MATRIX = yes
SRC = matrix.c i2c.c
# programming options
PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex
PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex