[Keyboard] Fix minor typo in Ploopy Trackball Nano Docs (#14717)

master
tangowithfoxtrot 2021-10-16 11:03:12 -05:00 committed by GitHub
parent eddb206369
commit 9200baf593
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 3 additions and 3 deletions

View File

@ -2,7 +2,7 @@
# Ploopy Trackball Nano # Ploopy Trackball Nano
![Ploopyco Trackball Nano](https://www.ploopy.co/uploads/b/113cb4122f867acc306a72a2741c5237a9b1d0db13abfe4e8e394cd466c4a311/_MG_7710_1614037372.jpg) ![Ploopyco Trackball Nano](https://ploopy.co/wp-content/uploads/2021/06/2.jpg)
It's a DIY, QMK Powered Trackball...Nano! It's a DIY, QMK Powered Trackball...Nano!
@ -28,7 +28,7 @@ Occasionally, new revisions of the PCB will be released. Every board comes with
Match the firmware that you flash onto the board with the designator on the board. Match the firmware that you flash onto the board with the designator on the board.
# Customzing your Ploopy Nano Trackball # Customizing your Ploopy Nano Trackball
You can change the DPI/CPI or speed of the trackball by calling `adns_set_cpi` at any time. Additionally, there is a `DPI_CONFIG` macro that will cycle through an array of options for the DPI. This is set to 375, 750, and 1375, but can be changed. 750 is the default. You can change the DPI/CPI or speed of the trackball by calling `adns_set_cpi` at any time. Additionally, there is a `DPI_CONFIG` macro that will cycle through an array of options for the DPI. This is set to 375, 750, and 1375, but can be changed. 750 is the default.
@ -51,4 +51,4 @@ When flashing the bootloader, use the following fuse settings:
|----------|-------------| |----------|-------------|
| Low | `0x5E` | | Low | `0x5E` |
| High | `0x99` | | High | `0x99` |
| Extended | `0xC3` | | Extended | `0xC3` |