[Keyboard] add runner3680 keyboards (#6069)

* add runner3680

* Remove unnecessary code
master
omkbd 2019-06-07 04:50:00 +09:00 committed by Drashna Jaelre
parent 06975aa0dd
commit 872480dde2
71 changed files with 1957 additions and 0 deletions

View File

@ -0,0 +1 @@
#include "3x6.h"

View File

@ -0,0 +1,19 @@
#pragma once
#include "runner3680.h"
#include "quantum.h"
#define LAYOUT( \
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25 \
) \
{ \
{ L00, L01, L02, L03, L04, L05 }, \
{ L10, L11, L12, L13, L14, L15 }, \
{ L20, L21, L22, L23, L24, L25 }, \
{ R05, R04, R03, R02, R01, R00 }, \
{ R15, R14, R13, R12, R11, R10 }, \
{ R25, R24, R23, R22, R21, R20 } \
}

View File

@ -0,0 +1,67 @@
/* Copyright 2019 omkbd
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0000
#define DEVICE_VER 0x0005
#define MANUFACTURER Omkbd
#define PRODUCT runner3680
#define DESCRIPTION A split keyboard
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 10
#define MATRIX_COLS 8
// wiring of each half
#define MATRIX_ROW_PINS { D4, C6, D7 }
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2 ,B6 }
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6} //uncomment this line and comment line above if you need to reverse left-to-right key order
/* define tapping term */
#define TAPPING_TERM 120
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 70
#define RGBLIGHT_SPLIT
#define RGBLED_SPLIT { 35, 35 } // Number of LEDs
#define SOFT_SERIAL_PIN D2
#define SELECT_SOFT_SERIAL_SPEED 1
/*Sets the protocol speed when using serial communication*/
//Speeds:
//0: about 189kbps (Experimental only)
//1: about 137kbps (default)
//2: about 75kbps
//3: about 39kbps
//4: about 26kbps
//5: about 20kbps

View File

@ -0,0 +1,9 @@
#pragma once
//#define USE_MATRIX_I2C
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS

View File

@ -0,0 +1,86 @@
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
rgblight_config_t RGB_current_config;
#endif
enum layer_number {
_QWERTY = 0,
_ADJUST
};
enum custom_keycodes {
QWERTY = SAFE_RANGE,
ADJUST,
RGBRST
};
// Fillers to make layering more clear
#define EISU LALT(KC_GRV)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* QWERTY
* ,-----------------------------------------. ,-----------------------------------------.
* | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Esc | A | S | D | F | G | | H | J | K | L | ; | " |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | | N | M | , | . | / | \ |
* `-----------------------------------------' `-----------------------------------------'
*/
[_QWERTY] = LAYOUT(
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS
),
/* Adjust
* ,-----------------------------------------. ,-----------------------------------------.
* | |RGBRST| RESET| | | | | | | | | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | TOG | HUI | SAI | VAI | | | | | | | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | MOD | HUD | SAD | VAD | | | | | | | | |
* `-----------------------------------------' `-----------------------------------------'
*/
[_ADJUST] = LAYOUT(
_______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______,
_______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______
)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
print("mode just switched to qwerty and this is a huge string\n");
set_single_persistent_default_layer(_QWERTY);
}
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
break;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_config = rgblight_config;
}
#endif
break;
}
return true;
}

View File

@ -0,0 +1 @@
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.

View File

View File

@ -0,0 +1 @@
#include "3x7.h"

View File

@ -0,0 +1,19 @@
#pragma once
#include "runner3680.h"
#include "quantum.h"
#define LAYOUT( \
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26 \
) \
{ \
{ L00, L01, L02, L03, L04, L05, L06 }, \
{ L10, L11, L12, L13, L14, L15, L16 }, \
{ L20, L21, L22, L23, L24, L25, L26 }, \
{ R06, R05, R04, R03, R02, R01, R00 }, \
{ R16, R15, R14, R13, R12, R11, R10 }, \
{ R26, R25, R24, R23, R22, R21, R20 } \
}

View File

@ -0,0 +1,67 @@
/* Copyright 2019 omkbd
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0000
#define DEVICE_VER 0x0005
#define MANUFACTURER Omkbd
#define PRODUCT runner3680
#define DESCRIPTION A split keyboard
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 10
#define MATRIX_COLS 8
// wiring of each half
#define MATRIX_ROW_PINS { D4, C6, D7 }
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2 ,B6 }
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5 } //uncomment this line and comment line above if you need to reverse left-to-right key order
/* define tapping term */
#define TAPPING_TERM 120
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 70
#define RGBLIGHT_SPLIT
#define RGBLED_SPLIT { 35, 35 } // Number of LEDs
#define SOFT_SERIAL_PIN D2
#define SELECT_SOFT_SERIAL_SPEED 1
/*Sets the protocol speed when using serial communication*/
//Speeds:
//0: about 189kbps (Experimental only)
//1: about 137kbps (default)
//2: about 75kbps
//3: about 39kbps
//4: about 26kbps
//5: about 20kbps

View File

@ -0,0 +1,9 @@
#pragma once
//#define USE_MATRIX_I2C
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS

View File

@ -0,0 +1,86 @@
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
rgblight_config_t RGB_current_config;
#endif
enum layer_number {
_QWERTY = 0,
_ADJUST
};
enum custom_keycodes {
QWERTY = SAFE_RANGE,
ADJUST,
RGBRST
};
// Fillers to make layering more clear
#define EISU LALT(KC_GRV)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* QWERTY
* ,------------------------------------------------. ,------------------------------------------------.
* | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | F6 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter|
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up |
* `------------------------------------------------' `------------------------------------------------'
*/
[_QWERTY] = LAYOUT(
KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,
KC_F6, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP
),
/* Adjust
* ,------------------------------------------------. ,------------------------------------------------.
* | | |RGBRST| RESET| | | | | | | | | | | |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | | | TOG | HUI | SAI | VAI | | | | | | | | | |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | | | MOD | HUD | SAD | VAD | | | | | | | | | |
* `------------------------------------------------' `------------------------------------------------'
*/
[_ADJUST] = LAYOUT(
_______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______
)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
print("mode just switched to qwerty and this is a huge string\n");
set_single_persistent_default_layer(_QWERTY);
}
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
break;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_config = rgblight_config;
}
#endif
break;
}
return true;
}

View File

@ -0,0 +1 @@
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.

View File

View File

@ -0,0 +1 @@
#include "3x8.h"

View File

@ -0,0 +1,19 @@
#pragma once
#include "runner3680.h"
#include "quantum.h"
#define LAYOUT( \
L00, L01, L02, L03, L04, L05, L06, L07, R00, R01, R02, R03, R04, R05, R06, R07, \
L10, L11, L12, L13, L14, L15, L16, L17, R10, R11, R12, R13, R14, R15, R16, R17, \
L20, L21, L22, L23, L24, L25, L26, L27, R20, R21, R22, R23, R24, R25, R26, R27 \
) \
{ \
{ L00, L01, L02, L03, L04, L05, L06, L07 }, \
{ L10, L11, L12, L13, L14, L15, L16, L17 }, \
{ L20, L21, L22, L23, L24, L25, L26, L27 }, \
{ R07, R06, R05, R04, R03, R02, R01, R00 }, \
{ R17, R16, R15, R14, R13, R12, R11, R10 }, \
{ R27, R26, R25, R24, R23, R22, R21, R20 } \
}

View File

@ -0,0 +1,67 @@
/* Copyright 2019 omkbd
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0000
#define DEVICE_VER 0x0005
#define MANUFACTURER Omkbd
#define PRODUCT runner3680
#define DESCRIPTION A split keyboard
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 10
#define MATRIX_COLS 8
// wiring of each half
#define MATRIX_ROW_PINS { D4, C6, D7 }
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 ,B6 }
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
/* define tapping term */
#define TAPPING_TERM 120
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 80
#define RGBLIGHT_SPLIT
#define RGBLED_SPLIT { 40, 40 } // Number of LEDs
#define SOFT_SERIAL_PIN D2
#define SELECT_SOFT_SERIAL_SPEED 1
/*Sets the protocol speed when using serial communication*/
//Speeds:
//0: about 189kbps (Experimental only)
//1: about 137kbps (default)
//2: about 75kbps
//3: about 39kbps
//4: about 26kbps
//5: about 20kbps

View File

@ -0,0 +1,9 @@
#pragma once
//#define USE_MATRIX_I2C
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS

View File

@ -0,0 +1,88 @@
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
rgblight_config_t RGB_current_config;
#endif
enum layer_number {
_QWERTY = 0,
_ADJUST
};
enum custom_keycodes {
QWERTY = SAFE_RANGE,
ADJUST,
RGBRST
};
// Fillers to make layering more clear
#define EISU LALT(KC_GRV)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* QWERTY
* ,-------------------------------------------------------. ,--------------------------------------------------------.
* | F3 | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] | Bksp |
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | F5 | F6 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter| Enter|
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | F7 | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up | Shift|
* `-------------------------------------------------------' `-------------------------------------------------------'
*/
[_QWERTY] = LAYOUT(
KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
KC_F5, KC_F6, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP, KC_RSFT
),
/* Adjust
* ,-------------------------------------------------------. ,--------------------------------------------------------.
* | | | |RGBRST| RESET| | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | | | | TOG | HUI | SAI | VAI | | | | | | | | | | |
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | | | | MOD | HUD | SAD | VAD | | | | | | | | | | |
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | | | | | | |
* `-------------------------------------------------------' `-------------------------------------------------------'
*/
[_ADJUST] = LAYOUT(
_______, _______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______
)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
print("mode just switched to qwerty and this is a huge string\n");
set_single_persistent_default_layer(_QWERTY);
}
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
break;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_config = rgblight_config;
}
#endif
break;
}
return true;
}

View File

@ -0,0 +1 @@
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.

View File

View File

@ -0,0 +1 @@
#include "4x6.h"

View File

@ -0,0 +1,22 @@
#pragma once
#include "runner3680.h"
#include "quantum.h"
#define LAYOUT( \
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
) \
{ \
{ L00, L01, L02, L03, L04, L05 }, \
{ L10, L11, L12, L13, L14, L15 }, \
{ L20, L21, L22, L23, L24, L25 }, \
{ L30, L31, L32, L33, L34, L35 }, \
{ R05, R04, R03, R02, R01, R00 }, \
{ R15, R14, R13, R12, R11, R10 }, \
{ R25, R24, R23, R22, R21, R20 }, \
{ R35, R34, R33, R32, R31, R30 } \
}

View File

@ -0,0 +1,67 @@
/* Copyright 2019 omkbd
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0000
#define DEVICE_VER 0x0005
#define MANUFACTURER Omkbd
#define PRODUCT runner3680
#define DESCRIPTION A split keyboard
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 10
#define MATRIX_COLS 8
// wiring of each half
#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2 ,B6 }
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6} //uncomment this line and comment line above if you need to reverse left-to-right key order
/* define tapping term */
#define TAPPING_TERM 120
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 70
#define RGBLIGHT_SPLIT
#define RGBLED_SPLIT { 35, 35 } // Number of LEDs
#define SOFT_SERIAL_PIN D2
#define SELECT_SOFT_SERIAL_SPEED 1
/*Sets the protocol speed when using serial communication*/
//Speeds:
//0: about 189kbps (Experimental only)
//1: about 137kbps (default)
//2: about 75kbps
//3: about 39kbps
//4: about 26kbps
//5: about 20kbps

View File

@ -0,0 +1,9 @@
#pragma once
//#define USE_MATRIX_I2C
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS

View File

@ -0,0 +1,92 @@
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
rgblight_config_t RGB_current_config;
#endif
enum layer_number {
_QWERTY = 0,
_ADJUST
};
enum custom_keycodes {
QWERTY = SAFE_RANGE,
ADJUST,
RGBRST
};
// Fillers to make layering more clear
#define EISU LALT(KC_GRV)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* QWERTY
* ,-----------------------------------------. ,-----------------------------------------.
* | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Esc | A | S | D | F | G | | H | J | K | L | ; | " |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | | N | M | , | . | / | \ |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left |
* `-----------------------------------------' `-----------------------------------------'
*/
[_QWERTY] = LAYOUT(
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS,
KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, EISU, KC_ESC, ADJUST, KC_LEFT
),
/* Adjust
* ,-----------------------------------------. ,-----------------------------------------.
* | |RGBRST| RESET| | | | | | | | | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | TOG | HUI | SAI | VAI | | | | | | | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | MOD | HUD | SAD | VAD | | | | | | | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | | | | | | | | | | |
* `-----------------------------------------' `-----------------------------------------'
*/
[_ADJUST] = LAYOUT(
_______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______,
_______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
print("mode just switched to qwerty and this is a huge string\n");
set_single_persistent_default_layer(_QWERTY);
}
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
break;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_config = rgblight_config;
}
#endif
break;
}
return true;
}

View File

@ -0,0 +1 @@
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.

View File

View File

@ -0,0 +1 @@
#include "4x7.h"

View File

@ -0,0 +1,22 @@
#pragma once
#include "runner3680.h"
#include "quantum.h"
#define LAYOUT( \
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36 \
) \
{ \
{ L00, L01, L02, L03, L04, L05, L06 }, \
{ L10, L11, L12, L13, L14, L15, L16 }, \
{ L20, L21, L22, L23, L24, L25, L26 }, \
{ L30, L31, L32, L33, L34, L35, L36 }, \
{ R06, R05, R04, R03, R02, R01, R00 }, \
{ R16, R15, R14, R13, R12, R11, R10 }, \
{ R26, R25, R24, R23, R22, R21, R20 }, \
{ R36, R35, R34, R33, R32, R31, R30 } \
}

View File

@ -0,0 +1,67 @@
/* Copyright 2019 omkbd
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0000
#define DEVICE_VER 0x0005
#define MANUFACTURER Omkbd
#define PRODUCT runner3680
#define DESCRIPTION A split keyboard
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 10
#define MATRIX_COLS 8
// wiring of each half
#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2 ,B6 }
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5 } //uncomment this line and comment line above if you need to reverse left-to-right key order
/* define tapping term */
#define TAPPING_TERM 120
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 70
#define RGBLIGHT_SPLIT
#define RGBLED_SPLIT { 35, 35 } // Number of LEDs
#define SOFT_SERIAL_PIN D2
#define SELECT_SOFT_SERIAL_SPEED 1
/*Sets the protocol speed when using serial communication*/
//Speeds:
//0: about 189kbps (Experimental only)
//1: about 137kbps (default)
//2: about 75kbps
//3: about 39kbps
//4: about 26kbps
//5: about 20kbps

View File

@ -0,0 +1,9 @@
#pragma once
//#define USE_MATRIX_I2C
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS

View File

@ -0,0 +1,92 @@
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
rgblight_config_t RGB_current_config;
#endif
enum layer_number {
_QWERTY = 0,
_ADJUST
};
enum custom_keycodes {
QWERTY = SAFE_RANGE,
ADJUST,
RGBRST
};
// Fillers to make layering more clear
#define EISU LALT(KC_GRV)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* QWERTY
* ,------------------------------------------------. ,------------------------------------------------.
* | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | F6 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter|
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | F10 | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left | Down |
* `------------------------------------------------' `------------------------------------------------'
*/
[_QWERTY] = LAYOUT(
KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,
KC_F6, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT,
KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP,
KC_F10, KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, EISU, KC_ESC, ADJUST, KC_LEFT, KC_DOWN
),
/* Adjust
* ,------------------------------------------------. ,------------------------------------------------.
* | | |RGBRST| RESET| | | | | | | | | | | |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | | | TOG | HUI | SAI | VAI | | | | | | | | | |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | | | MOD | HUD | SAD | VAD | | | | | | | | | |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | | | | | | | | | | | | | | | |
* `------------------------------------------------' `------------------------------------------------'
*/
[_ADJUST] = LAYOUT(
_______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
print("mode just switched to qwerty and this is a huge string\n");
set_single_persistent_default_layer(_QWERTY);
}
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
break;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_config = rgblight_config;
}
#endif
break;
}
return true;
}

View File

@ -0,0 +1 @@
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.

View File

View File

@ -0,0 +1 @@
#include "4x8.h"

View File

@ -0,0 +1,22 @@
#pragma once
#include "runner3680.h"
#include "quantum.h"
#define LAYOUT( \
L00, L01, L02, L03, L04, L05, L06, L07, R00, R01, R02, R03, R04, R05, R06, R07, \
L10, L11, L12, L13, L14, L15, L16, L17, R10, R11, R12, R13, R14, R15, R16, R17, \
L20, L21, L22, L23, L24, L25, L26, L27, R20, R21, R22, R23, R24, R25, R26, R27, \
L30, L31, L32, L33, L34, L35, L36, L37, R30, R31, R32, R33, R34, R35, R36, R37 \
) \
{ \
{ L00, L01, L02, L03, L04, L05, L06, L07 }, \
{ L10, L11, L12, L13, L14, L15, L16, L17 }, \
{ L20, L21, L22, L23, L24, L25, L26, L27 }, \
{ L30, L31, L32, L33, L34, L35, L36, L37 }, \
{ R07, R06, R05, R04, R03, R02, R01, R00 }, \
{ R17, R16, R15, R14, R13, R12, R11, R10 }, \
{ R27, R26, R25, R24, R23, R22, R21, R20 }, \
{ R37, R36, R35, R34, R33, R32, R31, R30 } \
}

View File

@ -0,0 +1,67 @@
/* Copyright 2019 omkbd
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0000
#define DEVICE_VER 0x0005
#define MANUFACTURER Omkbd
#define PRODUCT runner3680
#define DESCRIPTION A split keyboard
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 10
#define MATRIX_COLS 8
// wiring of each half
#define MATRIX_ROW_PINS { D4, C6, D7, E6 }
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 ,B6 }
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
/* define tapping term */
#define TAPPING_TERM 120
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 80
#define RGBLIGHT_SPLIT
#define RGBLED_SPLIT { 40, 40 } // Number of LEDs
#define SOFT_SERIAL_PIN D2
#define SELECT_SOFT_SERIAL_SPEED 1
/*Sets the protocol speed when using serial communication*/
//Speeds:
//0: about 189kbps (Experimental only)
//1: about 137kbps (default)
//2: about 75kbps
//3: about 39kbps
//4: about 26kbps
//5: about 20kbps

View File

@ -0,0 +1,9 @@
#pragma once
//#define USE_MATRIX_I2C
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS

View File

@ -0,0 +1,92 @@
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
rgblight_config_t RGB_current_config;
#endif
enum layer_number {
_QWERTY = 0,
_ADJUST
};
enum custom_keycodes {
QWERTY = SAFE_RANGE,
ADJUST,
RGBRST
};
// Fillers to make layering more clear
#define EISU LALT(KC_GRV)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* QWERTY
* ,-------------------------------------------------------. ,--------------------------------------------------------.
* | F3 | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] | Bksp |
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | F5 | F6 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter| Enter|
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | F7 | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up | Shift|
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | F9 | F10 | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left | Down | Right|
* `-------------------------------------------------------' `-------------------------------------------------------'
*/
[_QWERTY] = LAYOUT(
KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
KC_F5, KC_F6, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP, KC_RSFT,
KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, EISU, KC_ESC, ADJUST, KC_LEFT, KC_DOWN, KC_RGHT
),
/* Adjust
* ,-------------------------------------------------------. ,--------------------------------------------------------.
* | | | |RGBRST| RESET| | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | | | | TOG | HUI | SAI | VAI | | | | | | | | | | |
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | | | | MOD | HUD | SAD | VAD | | | | | | | | | | |
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | | | | | | |
* `-------------------------------------------------------' `-------------------------------------------------------'
*/
[_ADJUST] = LAYOUT(
_______, _______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
print("mode just switched to qwerty and this is a huge string\n");
set_single_persistent_default_layer(_QWERTY);
}
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
break;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_config = rgblight_config;
}
#endif
break;
}
return true;
}

View File

@ -0,0 +1 @@
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.

View File

View File

@ -0,0 +1 @@
#include "5x6.h"

View File

@ -0,0 +1,25 @@
#pragma once
#include "runner3680.h"
#include "quantum.h"
#define LAYOUT( \
L00, L01, L02, L03, L04, L05, R00, R01, R02, R03, R04, R05, \
L10, L11, L12, L13, L14, L15, R10, R11, R12, R13, R14, R15, \
L20, L21, L22, L23, L24, L25, R20, R21, R22, R23, R24, R25, \
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35, \
L40, L41, L42, L43, L44, L45, R40, R41, R42, R43, R44, R45 \
) \
{ \
{ L00, L01, L02, L03, L04, L05 }, \
{ L10, L11, L12, L13, L14, L15 }, \
{ L20, L21, L22, L23, L24, L25 }, \
{ L30, L31, L32, L33, L34, L35 }, \
{ L40, L41, L42, L43, L44, L45 }, \
{ R05, R04, R03, R02, R01, R00 }, \
{ R15, R14, R13, R12, R11, R10 }, \
{ R25, R24, R23, R22, R21, R20 }, \
{ R35, R34, R33, R32, R31, R30 }, \
{ R45, R44, R43, R42, R41, R40 } \
}

View File

@ -0,0 +1,67 @@
/* Copyright 2019 omkbd
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0000
#define DEVICE_VER 0x0005
#define MANUFACTURER Omkbd
#define PRODUCT runner3680
#define DESCRIPTION A split keyboard
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 10
#define MATRIX_COLS 8
// wiring of each half
#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2 ,B6 }
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6} //uncomment this line and comment line above if you need to reverse left-to-right key order
/* define tapping term */
#define TAPPING_TERM 120
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 70
#define RGBLIGHT_SPLIT
#define RGBLED_SPLIT { 35, 35 } // Number of LEDs
#define SOFT_SERIAL_PIN D2
#define SELECT_SOFT_SERIAL_SPEED 1
/*Sets the protocol speed when using serial communication*/
//Speeds:
//0: about 189kbps (Experimental only)
//1: about 137kbps (default)
//2: about 75kbps
//3: about 39kbps
//4: about 26kbps
//5: about 20kbps

View File

@ -0,0 +1,9 @@
#pragma once
//#define USE_MATRIX_I2C
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS

View File

@ -0,0 +1,98 @@
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
rgblight_config_t RGB_current_config;
#endif
enum layer_number {
_QWERTY = 0,
_ADJUST
};
enum custom_keycodes {
QWERTY = SAFE_RANGE,
ADJUST,
RGBRST
};
// Fillers to make layering more clear
#define EISU LALT(KC_GRV)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* QWERTY
* ,-----------------------------------------. ,-----------------------------------------.
* | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Esc | A | S | D | F | G | | H | J | K | L | ; | " |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Shift| Z | X | C | V | B | | N | M | , | . | / | \ |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left |
* `-----------------------------------------' `-----------------------------------------'
*/
[_QWERTY] = LAYOUT(
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS,
KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, EISU, KC_ESC, ADJUST, KC_LEFT
),
/* Adjust
* ,-----------------------------------------. ,-----------------------------------------.
* | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | |RGBRST| RESET| | | | | | | | | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | TOG | HUI | SAI | VAI | | | | | | | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | MOD | HUD | SAD | VAD | | | | | | | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | | | | | | | | | | |
* `-----------------------------------------' `-----------------------------------------'
*/
[_ADJUST] = LAYOUT( \
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
_______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______,
_______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
print("mode just switched to qwerty and this is a huge string\n");
set_single_persistent_default_layer(_QWERTY);
}
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
break;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_config = rgblight_config;
}
#endif
break;
}
return true;
}

View File

@ -0,0 +1 @@
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.

View File

View File

@ -0,0 +1 @@
#include "5x7.h"

View File

@ -0,0 +1,25 @@
#pragma once
#include "runner3680.h"
#include "quantum.h"
#define LAYOUT( \
L00, L01, L02, L03, L04, L05, L06, R00, R01, R02, R03, R04, R05, R06, \
L10, L11, L12, L13, L14, L15, L16, R10, R11, R12, R13, R14, R15, R16, \
L20, L21, L22, L23, L24, L25, L26, R20, R21, R22, R23, R24, R25, R26, \
L30, L31, L32, L33, L34, L35, L36, R30, R31, R32, R33, R34, R35, R36, \
L40, L41, L42, L43, L44, L45, L46, R40, R41, R42, R43, R44, R45, R46 \
) \
{ \
{ L00, L01, L02, L03, L04, L05, L06 }, \
{ L10, L11, L12, L13, L14, L15, L16 }, \
{ L20, L21, L22, L23, L24, L25, L26 }, \
{ L30, L31, L32, L33, L34, L35, L36 }, \
{ L40, L41, L42, L43, L44, L45, L46 }, \
{ R06, R05, R04, R03, R02, R01, R00 }, \
{ R16, R15, R14, R13, R12, R11, R10 }, \
{ R26, R25, R24, R23, R22, R21, R20 }, \
{ R36, R35, R34, R33, R32, R31, R30 }, \
{ R46, R45, R44, R43, R42, R41, R40 } \
}

View File

@ -0,0 +1,67 @@
/* Copyright 2019 omkbd
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0000
#define DEVICE_VER 0x0005
#define MANUFACTURER Omkbd
#define PRODUCT runner3680
#define DESCRIPTION A split keyboard
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 10
#define MATRIX_COLS 8
// wiring of each half
#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2 ,B6 }
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5 } //uncomment this line and comment line above if you need to reverse left-to-right key order
/* define tapping term */
#define TAPPING_TERM 120
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 70
#define RGBLIGHT_SPLIT
#define RGBLED_SPLIT { 35, 35 } // Number of LEDs
#define SOFT_SERIAL_PIN D2
#define SELECT_SOFT_SERIAL_SPEED 1
/*Sets the protocol speed when using serial communication*/
//Speeds:
//0: about 189kbps (Experimental only)
//1: about 137kbps (default)
//2: about 75kbps
//3: about 39kbps
//4: about 26kbps
//5: about 20kbps

View File

@ -0,0 +1,9 @@
#pragma once
//#define USE_MATRIX_I2C
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS

View File

@ -0,0 +1,98 @@
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
rgblight_config_t RGB_current_config;
#endif
enum layer_number {
_QWERTY = 0,
_ADJUST
};
enum custom_keycodes {
QWERTY = SAFE_RANGE,
ADJUST,
RGBRST
};
// Fillers to make layering more clear
#define EISU LALT(KC_GRV)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* QWERTY
* ,------------------------------------------------. ,------------------------------------------------.
* | F1 | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | = |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | F2 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | F3 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter|
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | F4 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Shift|
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | F5 | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left | Down |
* `------------------------------------------------' `------------------------------------------------'
*/
[_QWERTY] = LAYOUT( \
KC_F1, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, \
KC_F2, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, \
KC_F3, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
KC_F4, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_RSFT, \
KC_F5, KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, ADJUST, KC_LEFT, KC_DOWN, KC_UP, KC_RIGHT \
),
/* Adjust
* ,------------------------------------------------. ,------------------------------------------------.
* | | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 | F12 |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | | |RGBRST| RESET| | | | | | | | | | | |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | | | TOG | HUI | SAI | VAI | | | | | | | | | |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | | | MOD | HUD | SAD | VAD | | | | | | | | | |
* |------+------+------+------+------+------+------| |------+------+------+------+------+------+------|
* | | | | | | | | | | | | | | | |
* `------------------------------------------------' `------------------------------------------------'
*/
[_ADJUST] = LAYOUT( \
_______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, \
_______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______ \
)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
print("mode just switched to qwerty and this is a huge string\n");
set_single_persistent_default_layer(_QWERTY);
}
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
break;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_config = rgblight_config;
}
#endif
break;
}
return true;
}

View File

@ -0,0 +1 @@
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.

View File

View File

@ -0,0 +1 @@
#include "5x8.h"

View File

@ -0,0 +1,25 @@
#pragma once
#include "runner3680.h"
#include "quantum.h"
#define LAYOUT( \
L00, L01, L02, L03, L04, L05, L06, L07, R00, R01, R02, R03, R04, R05, R06, R07, \
L10, L11, L12, L13, L14, L15, L16, L17, R10, R11, R12, R13, R14, R15, R16, R17, \
L20, L21, L22, L23, L24, L25, L26, L27, R20, R21, R22, R23, R24, R25, R26, R27, \
L30, L31, L32, L33, L34, L35, L36, L37, R30, R31, R32, R33, R34, R35, R36, R37, \
L40, L41, L42, L43, L44, L45, L46, L47, R40, R41, R42, R43, R44, R45, R46, R47 \
) \
{ \
{ L00, L01, L02, L03, L04, L05, L06, L07 }, \
{ L10, L11, L12, L13, L14, L15, L16, L17 }, \
{ L20, L21, L22, L23, L24, L25, L26, L27 }, \
{ L30, L31, L32, L33, L34, L35, L36, L37 }, \
{ L40, L41, L42, L43, L44, L45, L46, L47 }, \
{ R07, R06, R05, R04, R03, R02, R01, R00 }, \
{ R17, R16, R15, R14, R13, R12, R11, R10 }, \
{ R27, R26, R25, R24, R23, R22, R21, R20 }, \
{ R37, R36, R35, R34, R33, R32, R31, R30 }, \
{ R47, R46, R45, R44, R43, R42, R41, R40 } \
}

View File

@ -0,0 +1,67 @@
/* Copyright 2019 omkbd
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x0000
#define DEVICE_VER 0x0005
#define MANUFACTURER Omkbd
#define PRODUCT runner3680
#define DESCRIPTION A split keyboard
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 10
#define MATRIX_COLS 8
// wiring of each half
#define MATRIX_ROW_PINS { D4, C6, D7, E6, B4 }
#define MATRIX_COL_PINS { F4, F5, F6, F7, B1, B3, B2 ,B6 }
// #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6, F5, F4 } //uncomment this line and comment line above if you need to reverse left-to-right key order
/* define tapping term */
#define TAPPING_TERM 120
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 80
#define RGBLIGHT_SPLIT
#define RGBLED_SPLIT { 40, 40 } // Number of LEDs
#define SOFT_SERIAL_PIN D2
#define SELECT_SOFT_SERIAL_SPEED 1
/*Sets the protocol speed when using serial communication*/
//Speeds:
//0: about 189kbps (Experimental only)
//1: about 137kbps (default)
//2: about 75kbps
//3: about 39kbps
//4: about 26kbps
//5: about 20kbps

View File

@ -0,0 +1,9 @@
#pragma once
//#define USE_MATRIX_I2C
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS

View File

@ -0,0 +1,99 @@
#include QMK_KEYBOARD_H
#include "keymap_jp.h"
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
rgblight_config_t RGB_current_config;
#endif
enum layer_number {
_QWERTY = 0,
_ADJUST
};
enum custom_keycodes {
QWERTY = SAFE_RANGE,
ADJUST,
RGBRST
};
// Fillers to make layering more clear
#define EISU LALT(KC_GRV)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* QWERTY
* ,-------------------------------------------------------. ,--------------------------------------------------------.
* | F1 | F2 | EISU | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | ^ | \ |
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | F3 | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | @ | [ | Bksp |
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | F5 | F6 | Esc | A | S | D | F | G | | H | J | K | L | : | ; | ] | Enter|
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | F7 | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up | Shift|
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | F9 | F10 | Ctrl | GUI | Alt | MHEN | Del | Space| | Enter| Bksp | HENK |Adjust| F10 | Left | Down | Right|
* `-------------------------------------------------------' `-------------------------------------------------------'
*/
[_QWERTY] = LAYOUT(
RGBRST , RGB_TOG, JP_ZHTG, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, JP_CIRC, JP_YEN,
RGB_MOD, RGB_SAI, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, JP_AT, JP_LBRC, KC_BSPC,
RGB_SAI, RGB_SAD, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, JP_COLN, JP_RBRC, KC_ENT,
RGB_VAI, RGB_VAD, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, JP_BSLS, KC_UP, KC_RSFT,
_______, _______, KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, KC_HENK, ADJUST, KC_F10, KC_LEFT, KC_DOWN, KC_RGHT
),
/* Adjust
* ,-------------------------------------------------------. ,--------------------------------------------------------.
* | | | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 | F12 | |
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | | | |RGBRST| RESET| | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | | | | TOG | HUI | SAI | VAI | | | | | | | | | | |
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | | | | MOD | HUD | SAD | VAD | | | | | | | | | | |
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | | | | | | |
* `-------------------------------------------------------' `-------------------------------------------------------'
*/
[_ADJUST] = LAYOUT(
_______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,
_______, _______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
print("mode just switched to qwerty and this is a huge string\n");
set_single_persistent_default_layer(_QWERTY);
}
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
break;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_config = rgblight_config;
}
#endif
break;
}
return true;
}

View File

@ -0,0 +1 @@
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.

View File

@ -0,0 +1,9 @@
#pragma once
//#define USE_MATRIX_I2C
/* Select hand configuration */
#define MASTER_LEFT
// #define MASTER_RIGHT
// #define EE_HANDS

View File

@ -0,0 +1,98 @@
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
rgblight_config_t RGB_current_config;
#endif
enum layer_number {
_QWERTY = 0,
_ADJUST
};
enum custom_keycodes {
QWERTY = SAFE_RANGE,
ADJUST,
RGBRST
};
// Fillers to make layering more clear
#define EISU LALT(KC_GRV)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* QWERTY
* ,-------------------------------------------------------. ,--------------------------------------------------------.
* | F1 | F2 | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | - | = | Del |
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | F3 | F4 | Tab | Q | W | E | R | T | | Y | U | I | O | P | [ | ] | Bksp |
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | F5 | F6 | Esc | A | S | D | F | G | | H | J | K | L | ; | " | Enter| Enter|
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | F7 | F8 | Shift| Z | X | C | V | B | | N | M | , | . | / | \ | Up | Shift|
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | F9 | F10 | Ctrl | GUI | Alt | EISU | Del | Space| | Enter| Bksp | EISU | ESC |Adjust| Left | Down | Right|
* `-------------------------------------------------------' `-------------------------------------------------------'
*/
[_QWERTY] = LAYOUT(
KC_F1, KC_F2, KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_DEL,
KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC,
KC_F5, KC_F6, KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_ENT,
KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_BSLS, KC_UP, KC_RSFT,
KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, EISU, KC_DEL, KC_SPC, KC_ENT, KC_BSPC, EISU, KC_ESC, ADJUST, KC_LEFT, KC_DOWN, KC_RGHT
),
/* Adjust
* ,-------------------------------------------------------. ,--------------------------------------------------------.
* | | | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 | F12 | |
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | | | |RGBRST| RESET| | | | | | | | | | | | |
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | | | | TOG | HUI | SAI | VAI | | | | | | | | | | |
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | | | | MOD | HUD | SAD | VAD | | | | | | | | | | |
* |------+------+------+------+------+------+------+------| |------+------+------+------+------+------+------+------|
* | | | | | | | | | | | | | | | | | |
* `-------------------------------------------------------' `-------------------------------------------------------'
*/
[_ADJUST] = LAYOUT(
_______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,
_______, _______, _______, RGBRST, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, RGB_TOG, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, RGB_MOD, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
)
};
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case QWERTY:
if (record->event.pressed) {
print("mode just switched to qwerty and this is a huge string\n");
set_single_persistent_default_layer(_QWERTY);
}
break;
case ADJUST:
if (record->event.pressed) {
layer_on(_ADJUST);
} else {
layer_off(_ADJUST);
}
break;
case RGBRST:
#ifdef RGBLIGHT_ENABLE
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_config = rgblight_config;
}
#endif
break;
}
return true;
}

View File

@ -0,0 +1 @@
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.

View File

View File

@ -0,0 +1,3 @@
#pragma once
#include "config_common.h"

View File

@ -0,0 +1,15 @@
# runner3680
![runner3680](https://github.com/omkbd/Runner3680/blob/master/Picture/Runner3680.jpg)
A split ortholinear keyboard. Each half is a 5x8 arrangement, with breakable pieces to allow the number of rows to be customized between 3 to 5, and the number of columns to be between 6 to 8.
Keyboard Maintainer: [omkbd](https://github.com/omkbd) [@omkbd](https://twitter.com/omkbd)
Hardware Supported: Runner3680, Pro Micro ATmega32u4
Hardware Availability: Order your own [yourself](https://github.com/omkbd/Runner3680)
Make example for this keyboard (after setting up your build environment):
make runner3680/5x8:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -0,0 +1,60 @@
# MCU name
MCU = atmega32u4
# Processor frequency.
F_CPU = 16000000
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# atmega32a bootloadHID
BOOTLOADER = caterina
# If you don't know the bootloader type, then you can specify the
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
SPLIT_KEYBOARD = yes # Enables split keyboard support
DEFAULT_FOLDER = runner3680/5x8

View File

@ -0,0 +1 @@
#include "runner3680.h"

View File

@ -0,0 +1,39 @@
#pragma once
#include "quantum.h"
#ifdef KEYBOARD_runner3680_5x8
#include "5x8.h"
#endif
#ifdef KEYBOARD_runner3680_5x7
#include "5x7.h"
#endif
#ifdef KEYBOARD_runner3680_5x6
#include "5x6.h"
#endif
#ifdef KEYBOARD_runner3680_4x8
#include "4x8.h"
#endif
#ifdef KEYBOARD_runner3680_4x7
#include "4x7.h"
#endif
#ifdef KEYBOARD_runner3680_4x6
#include "4x6.h"
#endif
#ifdef KEYBOARD_runner3680_3x8
#include "3x8.h"
#endif
#ifdef KEYBOARD_runner3680_3x7
#include "3x7.h"
#endif
#ifdef KEYBOARD_runner3680_3x6
#include "3x6.h"
#endif