bface refactor (#6333)

* remove custom matrix support

* remove custom i2c and led driver

* minor cleanups

* update readme
master
Drashna Jaelre 2019-07-15 10:38:26 -07:00 committed by GitHub
commit 7ba82cb5b7
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
11 changed files with 84 additions and 415 deletions

View File

@ -14,6 +14,8 @@ Flashing
ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.
**Reset Key:** Hold down the key located at K00, commonly programmed as left control while plugging in the keyboard.
Windows:
1. Download [HIDBootFlash](http://vusb.wikidot.com/project:hidbootflash).
2. Place your keyboard into reset.
@ -33,7 +35,7 @@ macOS:
3. Install the following packages:
```
brew install python
brew install pyusb
pip3 install pyusb
brew install --HEAD`https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
```

View File

@ -1,94 +0,0 @@
/* Copyright 2017 Sebastian Kaim
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef BACKLIGHT_ENABLE
#include "backlight_ps2avrGB.h"
#define sbi(reg,bit) reg |= (_BV(bit))
#define cbi(reg,bit) reg &= (~_BV(bit))
#define PWM10 WGM10
#define PWM11 WGM11
#define COM1x1 COM1B1
#define OCR1x OCR1B
void backlight_init_ports(void)
{
#if BACKLIGHT_ON_STATE == 0
backlight_off();
#else
backlight_on();
#endif
// setup pwm
// this bitmagic is sourced from the original firmware
/*TCCR1B = ((TCCR1B & ~0x07) | 0x03);
TCNT1H = 0;
TCNT1L = 0;
sbi(TIMSK, TOIE1);
OCR1BH = 0;
OCR1BL = 0;
cbi(TCCR1A,PWM11);
sbi(TCCR1A,PWM10);
sbi(TCCR1A,COM1B1);
cbi(TCCR1A,COM1B0);*/
ICR1 = 0xFFFF;
TCCR1A = _BV(COM1x1) | _BV(WGM11); // = 0b00001010;
TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
backlight_init();
}
void backlight_set(uint8_t level)
{
if( level == 0 ) {
backlight_off();
}
else {
backlight_on();
/*uint8_t pwm = get_pwm_for_brightness(level);
set_backlight_pwm(pwm);
TCCR1A |= _BV(COM1x1);
OCR1x = (level >= 2) ? 0xFFFF : 0x00FF;*/
}
}
#define PWM_MAX 0xFF
uint8_t get_pwm_for_brightness(uint8_t level)
{
// we need to cast up here to allow multiplication with 0xFF. We could also use floats, but this is probably a lot faster.
uint16_t brightness = (uint16_t)level * (uint16_t)PWM_MAX / (uint16_t)BACKLIGHT_LEVELS;
return (uint8_t)brightness;
}
void backlight_on(void)
{
//_SFR_IO8(0x12) |= _BV(0x4);
LED_PIN |= BACKLIGHT_PORT_NUM;
}
void backlight_off(void)
{
//_SFR_IO8(0x12) &= ~_BV(0x4);
LED_PIN &= ~BACKLIGHT_PORT_NUM;
}
void set_backlight_pwm(uint8_t level) {
// this does not work (yet)
//OCR1B = level;
}
#endif // BACKLIGHT_ENABLE

View File

@ -1,35 +0,0 @@
/* Copyright 2017 Sebastian Kaim
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#if defined(__AVR__)
#include <avr/pgmspace.h>
#include <avr/io.h>
#include <avr/interrupt.h>
#endif
#include <stddef.h>
#include <stdlib.h>
#include "backlight.h"
#ifndef PS2AVRGB_BACKLIGHT_H
#define PS2AVRGB_BACKLIGHT_H
uint8_t get_pwm_for_brightness(uint8_t level);
void set_backlight_pwm(uint8_t level);
void backlight_on(void);
void backlight_off(void);
#endif

View File

@ -1,30 +1,23 @@
/*
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
Copyright 2018 Sebastian Kaim <sebb@sebb767.de>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "bface.h"
/* Copyright 2019 MechMerlin
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "rgblight.h"
#include <avr/pgmspace.h>
#include "action_layer.h"
#include "i2c.h"
#include "i2c_master.h"
#include "quantum.h"
#ifdef RGBLIGHT_ENABLE
extern rgblight_config_t rgblight_config;
void rgblight_set(void) {
@ -37,10 +30,59 @@ void rgblight_set(void) {
}
i2c_init();
i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
}
#endif
void matrix_init_kb(void) {
#ifdef RGBLIGHT_ENABLE
if (rgblight_config.enable) {
i2c_init();
i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
}
#endif
// call user level keymaps, if any
matrix_init_user();
}
void matrix_scan_kb(void) {
#ifdef RGBLIGHT_ENABLE
rgblight_task();
#endif
matrix_scan_user();
/* Nothing else for now. */
}
__attribute__ ((weak))
void matrix_scan_user(void) {
rgblight_task();
}
void backlight_init_ports(void) {
// initialize pins D0, D1, D4 and D6 as output
setPinOutput(D0);
setPinOutput(D1);
setPinOutput(D4);
setPinOutput(D6);
// turn backlight LEDs on
writePinHigh(D0);
writePinHigh(D1);
writePinHigh(D4);
writePinHigh(D6);
}
void backlight_set(uint8_t level) {
if (level == 0) {
// turn backlight LEDs off
writePinLow(D0);
writePinLow(D1);
writePinLow(D4);
writePinLow(D6);
} else {
// turn backlight LEDs on
writePinHigh(D0);
writePinHigh(D1);
writePinHigh(D4);
writePinHigh(D6);
}
}

View File

@ -16,8 +16,7 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef KEYMAP_COMMON_H
#define KEYMAP_COMMON_H
#pragma once
#include "quantum_keycodes.h"
#include "keycode.h"
@ -27,8 +26,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, \
K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3, \
K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KD2, \
K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, \
K00, K10, K20, K56, K57, KA0, KB0, KC0 \
K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, \
K00, K10, K20, K56, K57, KA0, KB0, KC0 \
){ \
{ K00, K10, K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KA0, KB0, KC0, KC_NO, KC_NO }, \
{ K01, K11, K21, K31, K41, K51, KC_NO, KC_NO, KC_NO, KC_NO, KA1, KB1, KC_NO, KC_NO, KC_NO }, \
@ -37,8 +36,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
{ K04, K14, K24, K34, K44, K54, KC_NO, KC_NO, KC_NO, KC_NO, KA4, KB4, KC4, KC_NO, KE4 }, \
{ KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \
{ KC_NO, K16, K26, K36, K46, K56, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB6, KC6, KD6, KE6 }, \
{ KC_NO, K17, K27, K37, K47, K57, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB7, KC7, KD7, KE7 } \
{ KC_NO, K17, K27, K37, K47, K57, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB7, KC7, KD7, KE7 } \
}
#endif

View File

@ -16,8 +16,7 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#pragma once
#define VENDOR_ID 0x20A0
#define PRODUCT_ID 0x422D
@ -30,6 +29,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROWS 8
#define MATRIX_COLS 15
// 0 1 2 3 4 5 6 7 8 9 A B C D E
#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7}
#define UNUSED_PINS
#define RGBLED_NUM 16
#define RGBLIGHT_ANIMATIONS
@ -43,4 +47,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define BACKLIGHT_PORT_NUM (1 << 4)
#endif
#endif

View File

@ -1,104 +0,0 @@
/*
Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <avr/io.h>
#include <util/twi.h>
#include "i2c.h"
void i2c_set_bitrate(uint16_t bitrate_khz) {
uint8_t bitrate_div = ((F_CPU / 1000l) / bitrate_khz);
if (bitrate_div >= 16) {
bitrate_div = (bitrate_div - 16) / 2;
}
TWBR = bitrate_div;
}
void i2c_init(void) {
// set pull-up resistors on I2C bus pins
PORTC |= 0b11;
i2c_set_bitrate(400);
// enable TWI (two-wire interface)
TWCR |= (1 << TWEN);
// enable TWI interrupt and slave address ACK
TWCR |= (1 << TWIE);
TWCR |= (1 << TWEA);
}
uint8_t i2c_start(uint8_t address) {
// reset TWI control register
TWCR = 0;
// begin transmission and wait for it to end
TWCR = (1<<TWINT) | (1<<TWSTA) | (1<<TWEN);
while (!(TWCR & (1<<TWINT)));
// check if the start condition was successfully transmitted
if ((TWSR & 0xF8) != TW_START) {
return 1;
}
// transmit address and wait
TWDR = address;
TWCR = (1<<TWINT) | (1<<TWEN);
while (!(TWCR & (1<<TWINT)));
// check if the device has acknowledged the READ / WRITE mode
uint8_t twst = TW_STATUS & 0xF8;
if ((twst != TW_MT_SLA_ACK) && (twst != TW_MR_SLA_ACK)) {
return 1;
}
return 0;
}
void i2c_stop(void) {
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
}
uint8_t i2c_write(uint8_t data) {
TWDR = data;
// transmit data and wait
TWCR = (1<<TWINT) | (1<<TWEN);
while (!(TWCR & (1<<TWINT)));
if ((TWSR & 0xF8) != TW_MT_DATA_ACK) {
return 1;
}
return 0;
}
uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length) {
if (i2c_start(address)) {
return 1;
}
for (uint16_t i = 0; i < length; i++) {
if (i2c_write(data[i])) {
return 1;
}
}
i2c_stop();
return 0;
}

View File

@ -1,25 +0,0 @@
/*
Copyright 2016 Luiz Ribeiro <luizribeiro@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef __I2C_H__
#define __I2C_H__
void i2c_init(void);
void i2c_set_bitrate(uint16_t bitrate_khz);
uint8_t i2c_send(uint8_t address, uint8_t *data, uint16_t length);
#endif

View File

@ -1,113 +0,0 @@
/*
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <avr/io.h>
#include <util/delay.h>
#include "matrix.h"
#ifndef DEBOUNCE
# define DEBOUNCE 5
#endif
static uint8_t debouncing = DEBOUNCE;
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
void matrix_init(void) {
// all outputs for rows high
DDRB = 0xFF;
PORTB = 0xFF;
// all inputs for columns
DDRA = 0x00;
DDRC &= ~(0x111111<<2);
DDRD &= ~(1<<PIND7);
// all columns are pulled-up
PORTA = 0xFF;
PORTC |= (0b111111<<2);
PORTD |= (1<<PIND7);
// initialize matrix state: all keys off
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
matrix[row] = 0x00;
matrix_debouncing[row] = 0x00;
}
// activate backlight
//PORTD |= (1 << 4);
//_SFR_IO8(0x09) |= (1 << 4); //_BV(0x94 & 0xF);
//
// this is the code that *should* be executed in quantum.c
_SFR_IO8(0x12) |= _BV(0x4);
}
void matrix_set_row_status(uint8_t row) {
DDRB = (1 << row);
PORTB = ~(1 << row);
}
uint8_t bit_reverse(uint8_t x) {
x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
return x;
}
uint8_t matrix_scan(void) {
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
matrix_set_row_status(row);
_delay_us(5);
matrix_row_t cols = (
// cols 0..7, PORTA 0 -> 7
(~PINA) & 0xFF
) | (
// cols 8..13, PORTC 7 -> 0
bit_reverse((~PINC) & 0xFF) << 8
) | (
// col 14, PORTD 7
((~PIND) & (1 << PIND7)) << 7
);
if (matrix_debouncing[row] != cols) {
matrix_debouncing[row] = cols;
debouncing = DEBOUNCE;
}
}
if (debouncing) {
if (--debouncing) {
_delay_ms(1);
} else {
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
matrix[i] = matrix_debouncing[i];
}
}
}
matrix_scan_user();
return 1;
}
inline matrix_row_t matrix_get_row(uint8_t row) {
return matrix[row];
}
void matrix_print(void) {
}

View File

@ -25,7 +25,7 @@ NO_SUSPEND_POWER_DOWN = yes
F_CPU = 12000000
# build options
BOOTMAGIC_ENABLE = yes
BOOTMAGIC_ENABLE = no
MOUSEKEY_ENABLE = yes
EXTRAKEY_ENABLE = yes
CONSOLE_ENABLE = no
@ -40,8 +40,7 @@ OPT_DEFS = -DDEBUG_LEVEL=0
OPT_DEFS += -DBOOTLOADER_SIZE=2048
# custom matrix setup
CUSTOM_MATRIX = yes
SRC = matrix.c i2c.c backlight_ps2avrGB.c
SRC = i2c_master.c
# programming options
PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex

View File

@ -8,8 +8,7 @@
* This Revision: $Id: usbconfig-prototype.h 785 2010-05-30 17:57:07Z cs $
*/
#ifndef __usbconfig_h_included__
#define __usbconfig_h_included__
#pragma once
#include "config.h"
@ -392,5 +391,3 @@ section at the end of this file).
/* #define USB_INTR_PENDING EIFR */
#define USB_INTR_PENDING_BIT INTF1
#define USB_INTR_VECTOR INT1_vect
#endif /* __usbconfig_h_included__ */