Fix KBDPad MKI backlight, Num Lock LEDs; clean up firmware a bit (#6883)

* Update keyboard kit URL

* Replace custom RGB driver with new one from #7183

* Replace backlight with standard impl

* Remove some unnecessary default settings

* Disable COMMAND since docs want it off by default

(There's no working IS_COMMAND set for this board anyway, so it's
already a nop.)
master
Jonathan Rascher 2019-11-03 16:30:15 -06:00 committed by fauxpark
parent e9c44e396d
commit 732d1dd4f6
5 changed files with 17 additions and 77 deletions

View File

@ -27,12 +27,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROWS 6 #define MATRIX_ROWS 6
#define MATRIX_COLS 4 #define MATRIX_COLS 4
// 0 1 2 3 4 5
#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5 } #define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5 }
#define MATRIX_COL_PINS { A0, A1, A2, A3 } #define MATRIX_COL_PINS { A0, A1, A2, A3 }
#define UNUSED_PINS
#define DIODE_DIRECTION COL2ROW #define DIODE_DIRECTION COL2ROW
#define DEBOUNCE 5
#define BACKLIGHT_LEVELS 1 #define BACKLIGHT_PIN D4
#define BACKLIGHT_BREATHING
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 6

View File

@ -1,6 +1,6 @@
{ {
"keyboard_name": "KBDFans KBDPad MKI", "keyboard_name": "KBDfans KBDPad MKI",
"url": "", "url": "https://kbdfans.com/products/kbdfans-pad-custom-mechanical-keyboard-diy-kit",
"maintainer": "qmk", "maintainer": "qmk",
"width": 4, "width": 4,
"height": 6.25, "height": 6.25,

View File

@ -13,76 +13,17 @@
* You should have received a copy of the GNU General Public License * You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>. * along with this program. If not, see <http://www.gnu.org/licenses/>.
*/ */
#include "i2c_master.h"
#include "quantum.h" #include "quantum.h"
#ifdef RGBLIGHT_ENABLE #define NUMLOCK_PIN D0
#include "rgblight.h"
extern rgblight_config_t rgblight_config;
void rgblight_set(void) {
if (!rgblight_config.enable) {
for (uint8_t i = 0; i < RGBLED_NUM; i++) {
led[i].r = 0;
led[i].g = 0;
led[i].b = 0;
}
}
i2c_init();
i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
}
#endif
void matrix_init_kb(void) { void matrix_init_kb(void) {
#ifdef RGBLIGHT_ENABLE setPinOutput(NUMLOCK_PIN);
if (rgblight_config.enable) {
i2c_init();
i2c_transmit(0xb0, (uint8_t*)led, 3 * RGBLED_NUM, 100);
}
#endif
// call user level keymaps, if any
matrix_init_user(); matrix_init_user();
} }
void matrix_scan_kb(void) { void led_set_kb(uint8_t usb_led) {
#ifdef RGBLIGHT_ENABLE writePin(NUMLOCK_PIN, IS_LED_ON(usb_led, USB_LED_NUM_LOCK));
rgblight_task(); led_set_user(usb_led);
#endif
matrix_scan_user();
/* Nothing else for now. */
}
__attribute__ ((weak))
void matrix_scan_user(void) {
}
void backlight_init_ports(void) {
// initialize pins D0, D1, D4 and D6 as output
setPinOutput(D0);
setPinOutput(D1);
setPinOutput(D4);
setPinOutput(D6);
// turn backlight LEDs on
writePinHigh(D0);
writePinHigh(D1);
writePinHigh(D4);
writePinHigh(D6);
}
void backlight_set(uint8_t level) {
if (level == 0) {
// turn backlight LEDs off
writePinLow(D0);
writePinLow(D1);
writePinLow(D4);
writePinLow(D6);
} else {
// turn backlight LEDs on
writePinHigh(D0);
writePinHigh(D1);
writePinHigh(D4);
writePinHigh(D6);
}
} }

View File

@ -4,7 +4,7 @@ Custom numpad.
Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin) Keyboard Maintainer: [MechMerlin](https://github.com/mechmerlin)
Hardware Supported: KBDPad MKI Hardware Supported: KBDPad MKI
Hardware Availability: No longer available. Hardware Availability: [KBDfans](https://kbdfans.com/products/kbdfans-pad-custom-mechanical-keyboard-diy-kit)
Make example for this keyboard (after setting up your build environment): Make example for this keyboard (after setting up your build environment):

View File

@ -31,11 +31,9 @@ BOOTMAGIC_ENABLE = no
MOUSEKEY_ENABLE = yes MOUSEKEY_ENABLE = yes
EXTRAKEY_ENABLE = yes EXTRAKEY_ENABLE = yes
CONSOLE_ENABLE = yes CONSOLE_ENABLE = yes
COMMAND_ENABLE = yes COMMAND_ENABLE = no
BACKLIGHT_ENABLE = yes BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = no RGBLIGHT_ENABLE = no # PCB has underglow LEDs, but case doesn't let them show.
RGBLIGHT_CUSTOM_DRIVER = no WS2812_DRIVER = i2c
OPT_DEFS = -DDEBUG_LEVEL=0 OPT_DEFS = -DDEBUG_LEVEL=0
QUANTUM_LIB_SRC = i2c_master.c