Remove unused _BOOTLOADER defines

keyboards/alice/config.h

@@ -36,4 +36,3 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_ANIMATIONS
 
 #define NO_UART 1
-#define BOOTLOADHID_BOOTLOADER 1

keyboards/ergo42/rev1/config.h

@@ -40,8 +40,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
 // #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order
 
-#define CATERINA_BOOTLOADER
-
 /* define tapping term */
 #define TAPPING_TERM 100
 

keyboards/ergo42/rules.mk

@@ -43,13 +43,15 @@ F_USB = $(F_CPU)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
 
-# Boot Section Size in *bytes*
+# Bootloader selection
-#   Teensy halfKay   512
+#   Teensy       halfkay
-#   Teensy++ halfKay 1024
+#   Pro Micro    caterina
-#   Atmel DFU loader 4096
+#   Atmel DFU    atmel-dfu
-#   LUFA bootloader  4096
+#   LUFA DFU     lufa-dfu
-#   USBaspLoader     2048
+#   QMK DFU      qmk-dfu
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
+#   atmega32a    bootloadHID
+BOOTLOADER = caterina
+
 
 # Build Options
 #   change to "no" to disable the options, or define them in the Makefile in

keyboards/helix/rev1/config.h

@@ -51,8 +51,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
 // #define MATRIX_COL_PINS { B6, B2, B3, B1, F7, F6 } //uncomment this line and comment line above if you need to reverse left-to-right key order
 
-#define CATERINA_BOOTLOADER
-
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 

keyboards/helix/rules.mk

@@ -37,10 +37,13 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
-# Bootloader
+# Bootloader selection
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#   Teensy       halfkay
-#     different sizes, comment this out, and the correct address will be loaded
+#   Pro Micro    caterina
-#     automatically (+60). See bootloader.mk for all options.
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
 BOOTLOADER = caterina
 
 # Interrupt driven control endpoint task(+60)

keyboards/jj50/config.h

@@ -46,6 +46,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_VAL_STEP 18
 
 #define NO_UART 1
-#define BOOTLOADHID_BOOTLOADER 1
 
 #endif

keyboards/jj50/rules.mk

@@ -25,10 +25,13 @@ NO_SUSPEND_POWER_DOWN = yes
 # processor frequency
 F_CPU = 12000000
 
-# Bootloader
+# Bootloader selection
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#   Teensy       halfkay
-#     different sizes, comment this out, and the correct address will be loaded
+#   Pro Micro    caterina
-#     automatically (+60). See bootloader.mk for all options.
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
 BOOTLOADER = bootloadHID
 
 # build options

keyboards/lets_split/keymaps/zer09/config.h

@@ -35,7 +35,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
 #define MATRIX_COL_PINS { F7, B1, B3, B2, B6 }
 
-#define CATERINA_BOOTLOADER
 #define USB_MAX_POWER_CONSUMPTION 50
 
 /* Use I2C or Serial, not both */

keyboards/lets_split/rules.mk

@@ -33,10 +33,13 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
-# Bootloader
+# Bootloader selection
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#   Teensy       halfkay
-#     different sizes, comment this out, and the correct address will be loaded
+#   Pro Micro    caterina
-#     automatically (+60). See bootloader.mk for all options.
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
 BOOTLOADER = caterina
 
 # Interrupt driven control endpoint task(+60)

keyboards/lily58/rev1/config.h

@@ -36,8 +36,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROW_PINS { C6, D7, E6, B4, B5 }
 #define MATRIX_COL_PINS { F6, F7, B1, B3, B2, B6 }
 
-#define CATERINA_BOOTLOADER
-
 /* define tapping term */
 #define TAPPING_TERM 100
 

keyboards/lily58/rules.mk

@@ -40,10 +40,13 @@ ARCH = AVR8
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
 F_USB = $(F_CPU)
 
-# Bootloader
+# Bootloader selection
-#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#   Teensy       halfkay
-#     different sizes, comment this out, and the correct address will be loaded
+#   Pro Micro    caterina
-#     automatically (+60). See bootloader.mk for all options.
+#   Atmel DFU    atmel-dfu
+#   LUFA DFU     lufa-dfu
+#   QMK DFU      qmk-dfu
+#   atmega32a    bootloadHID
 BOOTLOADER = caterina
 
 # Interrupt driven control endpoint task(+60)

keyboards/meira/featherble/config.h

@@ -40,9 +40,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define B5_AUDIO
 #define AUDIO_VOICES
 
-#define CATERINA_BOOTLOADER
-
- 
 // #define BACKLIGHT_PIN B7
 // #define BACKLIGHT_BREATHING
 //#define BACKLIGHT_LEVELS 3

keyboards/meira/promicro/config.h

@@ -36,8 +36,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LED_EN_PIN D2
 #define UNUSED_PINS
 
-#define CATERINA_BOOTLOADER
-
 /* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
 #define DEBOUNCE 5
 

keyboards/meira/rules.mk

@@ -32,15 +32,14 @@ BOOTLOADER = caterina
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 
-
+# Bootloader selection
-# Boot Section Size in *bytes*
+#   Teensy       halfkay
-#   Teensy halfKay   512
+#   Pro Micro    caterina
-#   Teensy++ halfKay 1024
+#   Atmel DFU    atmel-dfu
-#   Atmel DFU loader 4096
+#   LUFA DFU     lufa-dfu
-#   LUFA bootloader  4096
+#   QMK DFU      qmk-dfu
-#   USBaspLoader     2048
+#   atmega32a    bootloadHID
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
+BOOTLOADER = caterina
-
 
 # Build Options
 #   change yes to no to disable

keyboards/orthodox/rev3/config.h

@@ -48,8 +48,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COL_PINS { D2, F5, F6, D6, D7, B4, B5, B6, F7 }
 /*/
 
-#define CATERINA_BOOTLOADER
-
 /* COL2ROW or ROW2COL */
 #define DIODE_DIRECTION COL2ROW
 

keyboards/skog/config.h

@@ -34,6 +34,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define BACKLIGHT_LEVELS 5
 
 #define NO_UART 1
-#define BOOTLOADHID_BOOTLOADER 1
 
 #endif

keyboards/winkeyless/bface/config.h

@@ -38,7 +38,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_ANIMATIONS
 
 #define NO_UART 1
-#define BOOTLOADHID_BOOTLOADER 1
 
 #ifdef BACKLIGHT_ENABLE
 	// the backlight PWM does not work (yet). Therefore, we only have two backlight levels (on/off)

keyboards/winkeyless/bface/rules.mk

@@ -37,7 +37,7 @@ RGBLIGHT_ENABLE = yes
 RGBLIGHT_CUSTOM_DRIVER = yes
 
 OPT_DEFS = -DDEBUG_LEVEL=0
-OPT_DEFS += -DBOOTLOADER_SIZE=2048
+BOOTLOADER = bootloadHID
 
 # custom matrix setup
 SRC = i2c_master.c

keyboards/ymd75/config.h

@@ -46,6 +46,5 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_VAL_STEP 18
 
 #define NO_UART 1
-#define BOOTLOADHID_BOOTLOADER 1
 
 #endif

keyboards/ymd96/config.h

@@ -51,7 +51,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define RGBLIGHT_ANIMATIONS
 /*#define RGBLIGHT_VAL_STEP 20
 
-#define NO_UART 1
+#define NO_UART 1*/
-#define BOOTLOADHID_BOOTLOADER 1*/
 
 #endif