Replace serial.c of quantum/split_common/ (#4669)
* Add provisional Helix implementation to test the quantum/split_common. * copy keyboards/helix/serial.[ch] to quantum/split_common/ * Make serial.c a pure driver. Remove buffer name and buffer size from serial.c. They should be placed in the caller(matrix.c, split_utils.c). * remove quantum/split_common/serial_backward_compatibility.h * Changed array serial_master_buffer to structure serial_m2s_buffer. * Changed array serial_slave_buffer to structure serial_s2m_buffer. * Change keyboards/miniaxe/matrix.c I also made changes to quantum/split_comon/matrix.c to keyboards/miniaxe/matrix.c. Note: I contacted @ka2hiro, creator of miniaxe, and I got permission to change keyboards/miniaxe/matrix.c. * update history comment in quantum/split_common/serial.c * Revert "Add provisional Helix implementation to test the quantum/split_common." This reverts commit 168c82ef82c88e79979d9796bab9cc819cc2f685. * fix keyboards/miniaxe/matrix.c, quantum/split_common/matrix.c avr-gcc 4.9.[23] report error. avr-gcc 5.4.0, avr-gcc 7.3.0 pass. It is funny. * update comment quantum/split_common/serial.c * Reserve RGBLIGHT_SPLIT macro in quantum/split_commonmaster
parent
2149f3b588
commit
72d4e4bfd7
|
@ -263,11 +263,6 @@ ifneq ($(strip $(CUSTOM_MATRIX)), yes)
|
|||
endif
|
||||
|
||||
ifeq ($(strip $(SPLIT_KEYBOARD)), yes)
|
||||
SERIAL_BACKWARD_COMPAT := $(wildcard $(QUANTUM_DIR)/split_common/serial_backward_compatibility.h)
|
||||
ifneq ($(SERIAL_BACKWARD_COMPAT),)
|
||||
CONFIG_H += $(SERIAL_BACKWARD_COMPAT)
|
||||
# $(info CONFIG_H=$(CONFIG_H))
|
||||
endif
|
||||
OPT_DEFS += -DSPLIT_KEYBOARD
|
||||
QUANTUM_SRC += $(QUANTUM_DIR)/split_common/split_flags.c \
|
||||
$(QUANTUM_DIR)/split_common/split_util.c
|
||||
|
|
|
@ -32,9 +32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#include "timer.h"
|
||||
#include "split_flags.h"
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
# include "rgblight.h"
|
||||
#endif
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
# include "backlight.h"
|
||||
extern backlight_config_t backlight_config;
|
||||
|
@ -55,6 +52,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
static bool debouncing = false;
|
||||
#endif
|
||||
|
||||
#if defined(USE_I2C) || defined(EH)
|
||||
|
||||
#if (MATRIX_COLS <= 8)
|
||||
# define print_matrix_header() print("\nr/c 01234567\n")
|
||||
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
|
||||
|
@ -62,6 +61,27 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
# define ROW_SHIFTER ((uint8_t)1)
|
||||
#else
|
||||
# error "Currently only supports 8 COLS"
|
||||
#endif
|
||||
|
||||
#else // USE_SERIAL
|
||||
|
||||
#if (MATRIX_COLS <= 8)
|
||||
# define print_matrix_header() print("\nr/c 01234567\n")
|
||||
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop(matrix[i])
|
||||
# define ROW_SHIFTER ((uint8_t)1)
|
||||
#elif (MATRIX_COLS <= 16)
|
||||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
|
||||
# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop16(matrix[i])
|
||||
# define ROW_SHIFTER ((uint16_t)1)
|
||||
#elif (MATRIX_COLS <= 32)
|
||||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
|
||||
# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop32(matrix[i])
|
||||
# define ROW_SHIFTER ((uint32_t)1)
|
||||
#endif
|
||||
|
||||
#endif
|
||||
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
|
||||
|
||||
|
@ -315,15 +335,39 @@ i2c_error: // the cable is disconnceted, or something else went wrong
|
|||
|
||||
#else // USE_SERIAL
|
||||
|
||||
|
||||
typedef struct _Serial_s2m_buffer_t {
|
||||
// TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack
|
||||
matrix_row_t smatrix[ROWS_PER_HAND];
|
||||
} Serial_s2m_buffer_t;
|
||||
|
||||
volatile Serial_s2m_buffer_t serial_s2m_buffer = {};
|
||||
volatile Serial_m2s_buffer_t serial_m2s_buffer = {};
|
||||
uint8_t volatile status0 = 0;
|
||||
|
||||
SSTD_t transactions[] = {
|
||||
{ (uint8_t *)&status0,
|
||||
sizeof(serial_m2s_buffer), (uint8_t *)&serial_m2s_buffer,
|
||||
sizeof(serial_s2m_buffer), (uint8_t *)&serial_s2m_buffer
|
||||
}
|
||||
};
|
||||
|
||||
void serial_master_init(void)
|
||||
{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
|
||||
|
||||
void serial_slave_init(void)
|
||||
{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); }
|
||||
|
||||
int serial_transaction(void) {
|
||||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
|
||||
|
||||
if (serial_update_buffers()) {
|
||||
if (soft_serial_transaction()) {
|
||||
return 1;
|
||||
}
|
||||
|
||||
// TODO: if MATRIX_COLS > 8 change to unpack()
|
||||
for (int i = 0; i < ROWS_PER_HAND; ++i) {
|
||||
matrix[slaveOffset+i] = serial_slave_buffer[i];
|
||||
matrix[slaveOffset+i] = serial_s2m_buffer.smatrix[i];
|
||||
}
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
|
@ -332,7 +376,7 @@ int serial_transaction(void) {
|
|||
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
// Write backlight level for slave to read
|
||||
serial_master_buffer[SERIAL_BACKLIT_START] = backlight_config.enable ? backlight_config.level : 0;
|
||||
serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0;
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
|
@ -375,8 +419,9 @@ void matrix_slave_scan(void) {
|
|||
i2c_slave_buffer[I2C_KEYMAP_START+i] = matrix[offset+i];
|
||||
}
|
||||
#else // USE_SERIAL
|
||||
// TODO: if MATRIX_COLS > 8 change to pack()
|
||||
for (int i = 0; i < ROWS_PER_HAND; ++i) {
|
||||
serial_slave_buffer[i] = matrix[offset+i];
|
||||
serial_s2m_buffer.smatrix[i] = matrix[offset+i];
|
||||
}
|
||||
#endif
|
||||
matrix_slave_scan_user();
|
||||
|
|
|
@ -32,9 +32,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#include "timer.h"
|
||||
#include "split_flags.h"
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
# include "rgblight.h"
|
||||
#endif
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
# include "backlight.h"
|
||||
extern backlight_config_t backlight_config;
|
||||
|
@ -55,6 +52,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
static bool debouncing = false;
|
||||
#endif
|
||||
|
||||
#if defined(USE_I2C) || defined(EH)
|
||||
|
||||
#if (MATRIX_COLS <= 8)
|
||||
# define print_matrix_header() print("\nr/c 01234567\n")
|
||||
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
|
||||
|
@ -62,6 +61,27 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
# define ROW_SHIFTER ((uint8_t)1)
|
||||
#else
|
||||
# error "Currently only supports 8 COLS"
|
||||
#endif
|
||||
|
||||
#else // USE_SERIAL
|
||||
|
||||
#if (MATRIX_COLS <= 8)
|
||||
# define print_matrix_header() print("\nr/c 01234567\n")
|
||||
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop(matrix[i])
|
||||
# define ROW_SHIFTER ((uint8_t)1)
|
||||
#elif (MATRIX_COLS <= 16)
|
||||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF\n")
|
||||
# define print_matrix_row(row) print_bin_reverse16(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop16(matrix[i])
|
||||
# define ROW_SHIFTER ((uint16_t)1)
|
||||
#elif (MATRIX_COLS <= 32)
|
||||
# define print_matrix_header() print("\nr/c 0123456789ABCDEF0123456789ABCDEF\n")
|
||||
# define print_matrix_row(row) print_bin_reverse32(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop32(matrix[i])
|
||||
# define ROW_SHIFTER ((uint32_t)1)
|
||||
#endif
|
||||
|
||||
#endif
|
||||
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
|
||||
|
||||
|
@ -286,24 +306,48 @@ i2c_error: // the cable is disconnceted, or something else went wrong
|
|||
|
||||
#else // USE_SERIAL
|
||||
|
||||
|
||||
typedef struct _Serial_s2m_buffer_t {
|
||||
// TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack
|
||||
matrix_row_t smatrix[ROWS_PER_HAND];
|
||||
} Serial_s2m_buffer_t;
|
||||
|
||||
volatile Serial_s2m_buffer_t serial_s2m_buffer = {};
|
||||
volatile Serial_m2s_buffer_t serial_m2s_buffer = {};
|
||||
uint8_t volatile status0 = 0;
|
||||
|
||||
SSTD_t transactions[] = {
|
||||
{ (uint8_t *)&status0,
|
||||
sizeof(serial_m2s_buffer), (uint8_t *)&serial_m2s_buffer,
|
||||
sizeof(serial_s2m_buffer), (uint8_t *)&serial_s2m_buffer
|
||||
}
|
||||
};
|
||||
|
||||
void serial_master_init(void)
|
||||
{ soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
|
||||
|
||||
void serial_slave_init(void)
|
||||
{ soft_serial_target_init(transactions, TID_LIMIT(transactions)); }
|
||||
|
||||
int serial_transaction(void) {
|
||||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
|
||||
|
||||
if (serial_update_buffers()) {
|
||||
if (soft_serial_transaction()) {
|
||||
return 1;
|
||||
}
|
||||
|
||||
// TODO: if MATRIX_COLS > 8 change to unpack()
|
||||
for (int i = 0; i < ROWS_PER_HAND; ++i) {
|
||||
matrix[slaveOffset+i] = serial_slave_buffer[i];
|
||||
matrix[slaveOffset+i] = serial_s2m_buffer.smatrix[i];
|
||||
}
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
|
||||
// Code to send RGB over serial goes here (not implemented yet)
|
||||
#endif
|
||||
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
// Write backlight level for slave to read
|
||||
serial_master_buffer[SERIAL_BACKLIT_START] = backlight_config.enable ? backlight_config.level : 0;
|
||||
serial_m2s_buffer.backlight_level = backlight_config.enable ? backlight_config.level : 0;
|
||||
#endif
|
||||
|
||||
return 0;
|
||||
|
@ -346,8 +390,9 @@ void matrix_slave_scan(void) {
|
|||
i2c_slave_buffer[I2C_KEYMAP_START+i] = matrix[offset+i];
|
||||
}
|
||||
#else // USE_SERIAL
|
||||
// TODO: if MATRIX_COLS > 8 change to pack()
|
||||
for (int i = 0; i < ROWS_PER_HAND; ++i) {
|
||||
serial_slave_buffer[i] = matrix[offset+i];
|
||||
serial_s2m_buffer.smatrix[i] = matrix[offset+i];
|
||||
}
|
||||
#endif
|
||||
matrix_slave_scan_user();
|
||||
|
|
|
@ -0,0 +1,31 @@
|
|||
#ifndef SPLIT_COMMON_MATRIX_H
|
||||
#define SPLIT_COMMON_MATRIX_H
|
||||
|
||||
#include <common/matrix.h>
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
# include "rgblight.h"
|
||||
#endif
|
||||
|
||||
typedef struct _Serial_m2s_buffer_t {
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
uint8_t backlight_level;
|
||||
#endif
|
||||
#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
|
||||
rgblight_config_t rgblight_config; //not yet use
|
||||
//
|
||||
// When MCUs on both sides drive their respective RGB LED chains,
|
||||
// it is necessary to synchronize, so it is necessary to communicate RGB information.
|
||||
// In that case, define the RGBLIGHT_SPLIT macro.
|
||||
//
|
||||
// Otherwise, if the master side MCU drives both sides RGB LED chains,
|
||||
// there is no need to communicate.
|
||||
#endif
|
||||
} Serial_m2s_buffer_t;
|
||||
|
||||
extern volatile Serial_m2s_buffer_t serial_m2s_buffer;
|
||||
|
||||
void serial_master_init(void);
|
||||
void serial_slave_init(void);
|
||||
|
||||
#endif
|
|
@ -1,5 +1,10 @@
|
|||
/*
|
||||
* WARNING: be careful changing this code, it is very timing dependent
|
||||
*
|
||||
* 2018-10-28 checked
|
||||
* avr-gcc 4.9.2
|
||||
* avr-gcc 5.4.0
|
||||
* avr-gcc 7.3.0
|
||||
*/
|
||||
|
||||
#ifndef F_CPU
|
||||
|
@ -9,8 +14,10 @@
|
|||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <util/delay.h>
|
||||
#include <stddef.h>
|
||||
#include <stdbool.h>
|
||||
#include "serial.h"
|
||||
//#include <pro_micro.h>
|
||||
|
||||
#ifdef SOFT_SERIAL_PIN
|
||||
|
||||
|
@ -63,215 +70,477 @@
|
|||
#error serial.c now support ATmega32U4 only
|
||||
#endif
|
||||
|
||||
// Serial pulse period in microseconds. Its probably a bad idea to lower this
|
||||
// value.
|
||||
#define SERIAL_DELAY 24
|
||||
#define ALWAYS_INLINE __attribute__((always_inline))
|
||||
#define NO_INLINE __attribute__((noinline))
|
||||
#define _delay_sub_us(x) __builtin_avr_delay_cycles(x)
|
||||
|
||||
uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
|
||||
uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
|
||||
// parity check
|
||||
#define ODD_PARITY 1
|
||||
#define EVEN_PARITY 0
|
||||
#define PARITY EVEN_PARITY
|
||||
|
||||
#define SLAVE_DATA_CORRUPT (1<<0)
|
||||
volatile uint8_t status = 0;
|
||||
#ifdef SERIAL_DELAY
|
||||
// custom setup in config.h
|
||||
// #define TID_SEND_ADJUST 2
|
||||
// #define SERIAL_DELAY 6 // micro sec
|
||||
// #define READ_WRITE_START_ADJUST 30 // cycles
|
||||
// #define READ_WRITE_WIDTH_ADJUST 8 // cycles
|
||||
#else
|
||||
// ============ Standard setups ============
|
||||
|
||||
#ifndef SELECT_SOFT_SERIAL_SPEED
|
||||
#define SELECT_SOFT_SERIAL_SPEED 1
|
||||
// 0: about 189kbps (Experiment only)
|
||||
// 1: about 137kbps (default)
|
||||
// 2: about 75kbps
|
||||
// 3: about 39kbps
|
||||
// 4: about 26kbps
|
||||
// 5: about 20kbps
|
||||
#endif
|
||||
|
||||
#if __GNUC__ < 6
|
||||
#define TID_SEND_ADJUST 14
|
||||
#else
|
||||
#define TID_SEND_ADJUST 2
|
||||
#endif
|
||||
|
||||
#if SELECT_SOFT_SERIAL_SPEED == 0
|
||||
// Very High speed
|
||||
#define SERIAL_DELAY 4 // micro sec
|
||||
#if __GNUC__ < 6
|
||||
#define READ_WRITE_START_ADJUST 33 // cycles
|
||||
#define READ_WRITE_WIDTH_ADJUST 3 // cycles
|
||||
#else
|
||||
#define READ_WRITE_START_ADJUST 34 // cycles
|
||||
#define READ_WRITE_WIDTH_ADJUST 7 // cycles
|
||||
#endif
|
||||
#elif SELECT_SOFT_SERIAL_SPEED == 1
|
||||
// High speed
|
||||
#define SERIAL_DELAY 6 // micro sec
|
||||
#if __GNUC__ < 6
|
||||
#define READ_WRITE_START_ADJUST 30 // cycles
|
||||
#define READ_WRITE_WIDTH_ADJUST 3 // cycles
|
||||
#else
|
||||
#define READ_WRITE_START_ADJUST 33 // cycles
|
||||
#define READ_WRITE_WIDTH_ADJUST 7 // cycles
|
||||
#endif
|
||||
#elif SELECT_SOFT_SERIAL_SPEED == 2
|
||||
// Middle speed
|
||||
#define SERIAL_DELAY 12 // micro sec
|
||||
#define READ_WRITE_START_ADJUST 30 // cycles
|
||||
#if __GNUC__ < 6
|
||||
#define READ_WRITE_WIDTH_ADJUST 3 // cycles
|
||||
#else
|
||||
#define READ_WRITE_WIDTH_ADJUST 7 // cycles
|
||||
#endif
|
||||
#elif SELECT_SOFT_SERIAL_SPEED == 3
|
||||
// Low speed
|
||||
#define SERIAL_DELAY 24 // micro sec
|
||||
#define READ_WRITE_START_ADJUST 30 // cycles
|
||||
#if __GNUC__ < 6
|
||||
#define READ_WRITE_WIDTH_ADJUST 3 // cycles
|
||||
#else
|
||||
#define READ_WRITE_WIDTH_ADJUST 7 // cycles
|
||||
#endif
|
||||
#elif SELECT_SOFT_SERIAL_SPEED == 4
|
||||
// Very Low speed
|
||||
#define SERIAL_DELAY 36 // micro sec
|
||||
#define READ_WRITE_START_ADJUST 30 // cycles
|
||||
#if __GNUC__ < 6
|
||||
#define READ_WRITE_WIDTH_ADJUST 3 // cycles
|
||||
#else
|
||||
#define READ_WRITE_WIDTH_ADJUST 7 // cycles
|
||||
#endif
|
||||
#elif SELECT_SOFT_SERIAL_SPEED == 5
|
||||
// Ultra Low speed
|
||||
#define SERIAL_DELAY 48 // micro sec
|
||||
#define READ_WRITE_START_ADJUST 30 // cycles
|
||||
#if __GNUC__ < 6
|
||||
#define READ_WRITE_WIDTH_ADJUST 3 // cycles
|
||||
#else
|
||||
#define READ_WRITE_WIDTH_ADJUST 7 // cycles
|
||||
#endif
|
||||
#else
|
||||
#error invalid SELECT_SOFT_SERIAL_SPEED value
|
||||
#endif /* SELECT_SOFT_SERIAL_SPEED */
|
||||
#endif /* SERIAL_DELAY */
|
||||
|
||||
#define SERIAL_DELAY_HALF1 (SERIAL_DELAY/2)
|
||||
#define SERIAL_DELAY_HALF2 (SERIAL_DELAY - SERIAL_DELAY/2)
|
||||
|
||||
#define SLAVE_INT_WIDTH_US 1
|
||||
#ifndef SERIAL_USE_MULTI_TRANSACTION
|
||||
#define SLAVE_INT_RESPONSE_TIME SERIAL_DELAY
|
||||
#else
|
||||
#define SLAVE_INT_ACK_WIDTH_UNIT 2
|
||||
#define SLAVE_INT_ACK_WIDTH 4
|
||||
#endif
|
||||
|
||||
static SSTD_t *Transaction_table = NULL;
|
||||
static uint8_t Transaction_table_size = 0;
|
||||
|
||||
inline static void serial_delay(void) ALWAYS_INLINE;
|
||||
inline static
|
||||
void serial_delay(void) {
|
||||
_delay_us(SERIAL_DELAY);
|
||||
}
|
||||
|
||||
inline static void serial_delay_half1(void) ALWAYS_INLINE;
|
||||
inline static
|
||||
void serial_delay_half1(void) {
|
||||
_delay_us(SERIAL_DELAY_HALF1);
|
||||
}
|
||||
|
||||
inline static void serial_delay_half2(void) ALWAYS_INLINE;
|
||||
inline static
|
||||
void serial_delay_half2(void) {
|
||||
_delay_us(SERIAL_DELAY_HALF2);
|
||||
}
|
||||
|
||||
inline static void serial_output(void) ALWAYS_INLINE;
|
||||
inline static
|
||||
void serial_output(void) {
|
||||
SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
|
||||
}
|
||||
|
||||
// make the serial pin an input with pull-up resistor
|
||||
inline static void serial_input_with_pullup(void) ALWAYS_INLINE;
|
||||
inline static
|
||||
void serial_input(void) {
|
||||
void serial_input_with_pullup(void) {
|
||||
SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
|
||||
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
|
||||
}
|
||||
|
||||
inline static uint8_t serial_read_pin(void) ALWAYS_INLINE;
|
||||
inline static
|
||||
uint8_t serial_read_pin(void) {
|
||||
return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
|
||||
}
|
||||
|
||||
inline static void serial_low(void) ALWAYS_INLINE;
|
||||
inline static
|
||||
void serial_low(void) {
|
||||
SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
|
||||
}
|
||||
|
||||
inline static void serial_high(void) ALWAYS_INLINE;
|
||||
inline static
|
||||
void serial_high(void) {
|
||||
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
|
||||
}
|
||||
|
||||
void serial_master_init(void) {
|
||||
void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size)
|
||||
{
|
||||
Transaction_table = sstd_table;
|
||||
Transaction_table_size = (uint8_t)sstd_table_size;
|
||||
serial_output();
|
||||
serial_high();
|
||||
}
|
||||
|
||||
void serial_slave_init(void) {
|
||||
serial_input();
|
||||
void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size)
|
||||
{
|
||||
Transaction_table = sstd_table;
|
||||
Transaction_table_size = (uint8_t)sstd_table_size;
|
||||
serial_input_with_pullup();
|
||||
|
||||
// Enable INT0
|
||||
EIMSK |= _BV(INT0);
|
||||
// Trigger on falling edge of INT0
|
||||
EICRA &= ~(_BV(ISC00) | _BV(ISC01));
|
||||
// Enable INT0-INT3,INT6
|
||||
EIMSK |= EIMSK_BIT;
|
||||
#if SERIAL_PIN_MASK == _BV(PE6)
|
||||
// Trigger on falling edge of INT6
|
||||
EICRB &= EICRx_BIT;
|
||||
#else
|
||||
// Trigger on falling edge of INT0-INT3
|
||||
EICRA &= EICRx_BIT;
|
||||
#endif
|
||||
}
|
||||
|
||||
// Used by the master to synchronize timing with the slave.
|
||||
// Used by the sender to synchronize timing with the reciver.
|
||||
static void sync_recv(void) NO_INLINE;
|
||||
static
|
||||
void sync_recv(void) {
|
||||
serial_input();
|
||||
// This shouldn't hang if the slave disconnects because the
|
||||
// serial line will float to high if the slave does disconnect.
|
||||
for (uint8_t i = 0; i < SERIAL_DELAY*5 && serial_read_pin(); i++ ) {
|
||||
}
|
||||
// This shouldn't hang if the target disconnects because the
|
||||
// serial line will float to high if the target does disconnect.
|
||||
while (!serial_read_pin());
|
||||
serial_delay();
|
||||
}
|
||||
|
||||
// Used by the slave to send a synchronization signal to the master.
|
||||
// Used by the reciver to send a synchronization signal to the sender.
|
||||
static void sync_send(void) NO_INLINE;
|
||||
static
|
||||
void sync_send(void) {
|
||||
serial_output();
|
||||
|
||||
serial_low();
|
||||
serial_delay();
|
||||
|
||||
serial_high();
|
||||
}
|
||||
|
||||
// Reads a byte from the serial line
|
||||
static
|
||||
uint8_t serial_read_byte(void) {
|
||||
uint8_t byte = 0;
|
||||
serial_input();
|
||||
for ( uint8_t i = 0; i < 8; ++i) {
|
||||
byte = (byte << 1) | serial_read_pin();
|
||||
serial_delay();
|
||||
_delay_us(1);
|
||||
static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) NO_INLINE;
|
||||
static uint8_t serial_read_chunk(uint8_t *pterrcount, uint8_t bit) {
|
||||
uint8_t byte, i, p, pb;
|
||||
|
||||
_delay_sub_us(READ_WRITE_START_ADJUST);
|
||||
for( i = 0, byte = 0, p = PARITY; i < bit; i++ ) {
|
||||
serial_delay_half1(); // read the middle of pulses
|
||||
if( serial_read_pin() ) {
|
||||
byte = (byte << 1) | 1; p ^= 1;
|
||||
} else {
|
||||
byte = (byte << 1) | 0; p ^= 0;
|
||||
}
|
||||
_delay_sub_us(READ_WRITE_WIDTH_ADJUST);
|
||||
serial_delay_half2();
|
||||
}
|
||||
/* recive parity bit */
|
||||
serial_delay_half1(); // read the middle of pulses
|
||||
pb = serial_read_pin();
|
||||
_delay_sub_us(READ_WRITE_WIDTH_ADJUST);
|
||||
serial_delay_half2();
|
||||
|
||||
*pterrcount += (p != pb)? 1 : 0;
|
||||
|
||||
return byte;
|
||||
}
|
||||
|
||||
// Sends a byte with MSB ordering
|
||||
void serial_write_chunk(uint8_t data, uint8_t bit) NO_INLINE;
|
||||
void serial_write_chunk(uint8_t data, uint8_t bit) {
|
||||
uint8_t b, p;
|
||||
for( p = PARITY, b = 1<<(bit-1); b ; b >>= 1) {
|
||||
if(data & b) {
|
||||
serial_high(); p ^= 1;
|
||||
} else {
|
||||
serial_low(); p ^= 0;
|
||||
}
|
||||
serial_delay();
|
||||
}
|
||||
/* send parity bit */
|
||||
if(p & 1) { serial_high(); }
|
||||
else { serial_low(); }
|
||||
serial_delay();
|
||||
|
||||
serial_low(); // sync_send() / senc_recv() need raise edge
|
||||
}
|
||||
|
||||
static void serial_send_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
|
||||
static
|
||||
void serial_write_byte(uint8_t data) {
|
||||
uint8_t b = 8;
|
||||
serial_output();
|
||||
while( b-- ) {
|
||||
if(data & (1 << b)) {
|
||||
serial_high();
|
||||
} else {
|
||||
serial_low();
|
||||
}
|
||||
serial_delay();
|
||||
void serial_send_packet(uint8_t *buffer, uint8_t size) {
|
||||
for (uint8_t i = 0; i < size; ++i) {
|
||||
uint8_t data;
|
||||
data = buffer[i];
|
||||
sync_send();
|
||||
serial_write_chunk(data,8);
|
||||
}
|
||||
}
|
||||
|
||||
// interrupt handle to be used by the slave device
|
||||
static uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) NO_INLINE;
|
||||
static
|
||||
uint8_t serial_recive_packet(uint8_t *buffer, uint8_t size) {
|
||||
uint8_t pecount = 0;
|
||||
for (uint8_t i = 0; i < size; ++i) {
|
||||
uint8_t data;
|
||||
sync_recv();
|
||||
data = serial_read_chunk(&pecount, 8);
|
||||
buffer[i] = data;
|
||||
}
|
||||
return pecount == 0;
|
||||
}
|
||||
|
||||
inline static
|
||||
void change_sender2reciver(void) {
|
||||
sync_send(); //0
|
||||
serial_delay_half1(); //1
|
||||
serial_low(); //2
|
||||
serial_input_with_pullup(); //2
|
||||
serial_delay_half1(); //3
|
||||
}
|
||||
|
||||
inline static
|
||||
void change_reciver2sender(void) {
|
||||
sync_recv(); //0
|
||||
serial_delay(); //1
|
||||
serial_low(); //3
|
||||
serial_output(); //3
|
||||
serial_delay_half1(); //4
|
||||
}
|
||||
|
||||
static inline uint8_t nibble_bits_count(uint8_t bits)
|
||||
{
|
||||
bits = (bits & 0x5) + (bits >> 1 & 0x5);
|
||||
bits = (bits & 0x3) + (bits >> 2 & 0x3);
|
||||
return bits;
|
||||
}
|
||||
|
||||
// interrupt handle to be used by the target device
|
||||
ISR(SERIAL_PIN_INTERRUPT) {
|
||||
sync_send();
|
||||
|
||||
uint8_t checksum = 0;
|
||||
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
|
||||
serial_write_byte(serial_slave_buffer[i]);
|
||||
sync_send();
|
||||
checksum += serial_slave_buffer[i];
|
||||
#ifndef SERIAL_USE_MULTI_TRANSACTION
|
||||
serial_low();
|
||||
serial_output();
|
||||
SSTD_t *trans = Transaction_table;
|
||||
#else
|
||||
// recive transaction table index
|
||||
uint8_t tid, bits;
|
||||
uint8_t pecount = 0;
|
||||
sync_recv();
|
||||
bits = serial_read_chunk(&pecount,7);
|
||||
tid = bits>>3;
|
||||
bits = (bits&7) != nibble_bits_count(tid);
|
||||
if( bits || pecount> 0 || tid > Transaction_table_size ) {
|
||||
return;
|
||||
}
|
||||
serial_write_byte(checksum);
|
||||
sync_send();
|
||||
serial_delay_half1();
|
||||
|
||||
// wait for the sync to finish sending
|
||||
serial_delay();
|
||||
serial_high(); // response step1 low->high
|
||||
serial_output();
|
||||
_delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT*SLAVE_INT_ACK_WIDTH);
|
||||
SSTD_t *trans = &Transaction_table[tid];
|
||||
serial_low(); // response step2 ack high->low
|
||||
#endif
|
||||
|
||||
// read the middle of pulses
|
||||
_delay_us(SERIAL_DELAY/2);
|
||||
// target send phase
|
||||
if( trans->target2initiator_buffer_size > 0 )
|
||||
serial_send_packet((uint8_t *)trans->target2initiator_buffer,
|
||||
trans->target2initiator_buffer_size);
|
||||
// target switch to input
|
||||
change_sender2reciver();
|
||||
|
||||
uint8_t checksum_computed = 0;
|
||||
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
|
||||
serial_master_buffer[i] = serial_read_byte();
|
||||
sync_send();
|
||||
checksum_computed += serial_master_buffer[i];
|
||||
}
|
||||
uint8_t checksum_received = serial_read_byte();
|
||||
sync_send();
|
||||
|
||||
serial_input(); // end transaction
|
||||
|
||||
if ( checksum_computed != checksum_received ) {
|
||||
status |= SLAVE_DATA_CORRUPT;
|
||||
// target recive phase
|
||||
if( trans->initiator2target_buffer_size > 0 ) {
|
||||
if (serial_recive_packet((uint8_t *)trans->initiator2target_buffer,
|
||||
trans->initiator2target_buffer_size) ) {
|
||||
*trans->status = TRANSACTION_ACCEPTED;
|
||||
} else {
|
||||
status &= ~SLAVE_DATA_CORRUPT;
|
||||
*trans->status = TRANSACTION_DATA_ERROR;
|
||||
}
|
||||
} else {
|
||||
*trans->status = TRANSACTION_ACCEPTED;
|
||||
}
|
||||
|
||||
inline
|
||||
bool serial_slave_DATA_CORRUPT(void) {
|
||||
return status & SLAVE_DATA_CORRUPT;
|
||||
sync_recv(); //weit initiator output to high
|
||||
}
|
||||
|
||||
// Copies the serial_slave_buffer to the master and sends the
|
||||
// serial_master_buffer to the slave.
|
||||
/////////
|
||||
// start transaction by initiator
|
||||
//
|
||||
// int soft_serial_transaction(int sstd_index)
|
||||
//
|
||||
// Returns:
|
||||
// 0 => no error
|
||||
// 1 => slave did not respond
|
||||
int serial_update_buffers(void) {
|
||||
// TRANSACTION_END
|
||||
// TRANSACTION_NO_RESPONSE
|
||||
// TRANSACTION_DATA_ERROR
|
||||
// this code is very time dependent, so we need to disable interrupts
|
||||
#ifndef SERIAL_USE_MULTI_TRANSACTION
|
||||
int soft_serial_transaction(void) {
|
||||
SSTD_t *trans = Transaction_table;
|
||||
#else
|
||||
int soft_serial_transaction(int sstd_index) {
|
||||
if( sstd_index > Transaction_table_size )
|
||||
return TRANSACTION_TYPE_ERROR;
|
||||
SSTD_t *trans = &Transaction_table[sstd_index];
|
||||
#endif
|
||||
cli();
|
||||
|
||||
// signal to the slave that we want to start a transaction
|
||||
// signal to the target that we want to start a transaction
|
||||
serial_output();
|
||||
serial_low();
|
||||
_delay_us(1);
|
||||
_delay_us(SLAVE_INT_WIDTH_US);
|
||||
|
||||
// wait for the slaves response
|
||||
serial_input();
|
||||
serial_high();
|
||||
_delay_us(SERIAL_DELAY);
|
||||
#ifndef SERIAL_USE_MULTI_TRANSACTION
|
||||
// wait for the target response
|
||||
serial_input_with_pullup();
|
||||
_delay_us(SLAVE_INT_RESPONSE_TIME);
|
||||
|
||||
// check if the slave is present
|
||||
// check if the target is present
|
||||
if (serial_read_pin()) {
|
||||
// slave failed to pull the line low, assume not present
|
||||
sei();
|
||||
return 1;
|
||||
}
|
||||
|
||||
// if the slave is present syncronize with it
|
||||
sync_recv();
|
||||
|
||||
uint8_t checksum_computed = 0;
|
||||
// receive data from the slave
|
||||
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
|
||||
serial_slave_buffer[i] = serial_read_byte();
|
||||
sync_recv();
|
||||
checksum_computed += serial_slave_buffer[i];
|
||||
}
|
||||
uint8_t checksum_received = serial_read_byte();
|
||||
sync_recv();
|
||||
|
||||
if (checksum_computed != checksum_received) {
|
||||
sei();
|
||||
return 1;
|
||||
}
|
||||
|
||||
uint8_t checksum = 0;
|
||||
// send data to the slave
|
||||
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
|
||||
serial_write_byte(serial_master_buffer[i]);
|
||||
sync_recv();
|
||||
checksum += serial_master_buffer[i];
|
||||
}
|
||||
serial_write_byte(checksum);
|
||||
sync_recv();
|
||||
|
||||
// always, release the line when not in use
|
||||
// target failed to pull the line low, assume not present
|
||||
serial_output();
|
||||
serial_high();
|
||||
|
||||
*trans->status = TRANSACTION_NO_RESPONSE;
|
||||
sei();
|
||||
return 0;
|
||||
return TRANSACTION_NO_RESPONSE;
|
||||
}
|
||||
|
||||
#endif /* SOFT_SERIAL_PIN */
|
||||
#else
|
||||
// send transaction table index
|
||||
int tid = (sstd_index<<3) | (7 & nibble_bits_count(sstd_index));
|
||||
sync_send();
|
||||
_delay_sub_us(TID_SEND_ADJUST);
|
||||
serial_write_chunk(tid, 7);
|
||||
serial_delay_half1();
|
||||
|
||||
// wait for the target response (step1 low->high)
|
||||
serial_input_with_pullup();
|
||||
while( !serial_read_pin() ) {
|
||||
_delay_sub_us(2);
|
||||
}
|
||||
|
||||
// check if the target is present (step2 high->low)
|
||||
for( int i = 0; serial_read_pin(); i++ ) {
|
||||
if (i > SLAVE_INT_ACK_WIDTH + 1) {
|
||||
// slave failed to pull the line low, assume not present
|
||||
serial_output();
|
||||
serial_high();
|
||||
*trans->status = TRANSACTION_NO_RESPONSE;
|
||||
sei();
|
||||
return TRANSACTION_NO_RESPONSE;
|
||||
}
|
||||
_delay_sub_us(SLAVE_INT_ACK_WIDTH_UNIT);
|
||||
}
|
||||
#endif
|
||||
|
||||
// initiator recive phase
|
||||
// if the target is present syncronize with it
|
||||
if( trans->target2initiator_buffer_size > 0 ) {
|
||||
if (!serial_recive_packet((uint8_t *)trans->target2initiator_buffer,
|
||||
trans->target2initiator_buffer_size) ) {
|
||||
serial_output();
|
||||
serial_high();
|
||||
*trans->status = TRANSACTION_DATA_ERROR;
|
||||
sei();
|
||||
return TRANSACTION_DATA_ERROR;
|
||||
}
|
||||
}
|
||||
|
||||
// initiator switch to output
|
||||
change_reciver2sender();
|
||||
|
||||
// initiator send phase
|
||||
if( trans->initiator2target_buffer_size > 0 ) {
|
||||
serial_send_packet((uint8_t *)trans->initiator2target_buffer,
|
||||
trans->initiator2target_buffer_size);
|
||||
}
|
||||
|
||||
// always, release the line when not in use
|
||||
sync_send();
|
||||
|
||||
*trans->status = TRANSACTION_END;
|
||||
sei();
|
||||
return TRANSACTION_END;
|
||||
}
|
||||
|
||||
#ifdef SERIAL_USE_MULTI_TRANSACTION
|
||||
int soft_serial_get_and_clean_status(int sstd_index) {
|
||||
SSTD_t *trans = &Transaction_table[sstd_index];
|
||||
cli();
|
||||
int retval = *trans->status;
|
||||
*trans->status = 0;;
|
||||
sei();
|
||||
return retval;
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
||||
// Helix serial.c history
|
||||
// 2018-1-29 fork from let's split and add PD2, modify sync_recv() (#2308, bceffdefc)
|
||||
// 2018-6-28 bug fix master to slave comm and speed up (#3255, 1038bbef4)
|
||||
// (adjusted with avr-gcc 4.9.2)
|
||||
// 2018-7-13 remove USE_SERIAL_PD2 macro (#3374, f30d6dd78)
|
||||
// (adjusted with avr-gcc 4.9.2)
|
||||
// 2018-8-11 add support multi-type transaction (#3608, feb5e4aae)
|
||||
// (adjusted with avr-gcc 4.9.2)
|
||||
// 2018-10-21 fix serial and RGB animation conflict (#4191, 4665e4fff)
|
||||
// (adjusted with avr-gcc 7.3.0)
|
||||
// 2018-10-28 re-adjust compiler depend value of delay (#4269, 8517f8a66)
|
||||
// (adjusted with avr-gcc 5.4.0, 7.3.0)
|
||||
// 2018-12-17 copy to TOP/quantum/split_common/ and remove backward compatibility code (#4669)
|
||||
|
|
|
@ -1,5 +1,5 @@
|
|||
#ifndef MY_SERIAL_H
|
||||
#define MY_SERIAL_H
|
||||
#ifndef SOFT_SERIAL_H
|
||||
#define SOFT_SERIAL_H
|
||||
|
||||
#include <stdbool.h>
|
||||
|
||||
|
@ -7,20 +7,59 @@
|
|||
// Need Soft Serial defines in config.h
|
||||
// /////////////////////////////////////////////////////////////////
|
||||
// ex.
|
||||
// /* Configuration of lower interface with the lower layer(hardware) of serial.c */
|
||||
// #define SOFT_SERIAL_PIN ?? // ?? = D0,D1,D2,D3,E6
|
||||
// OPTIONAL: #define SELECT_SOFT_SERIAL_SPEED ? // ? = 1,2,3,4,5
|
||||
// // 1: about 137kbps (default)
|
||||
// // 2: about 75kbps
|
||||
// // 3: about 39kbps
|
||||
// // 4: about 26kbps
|
||||
// // 5: about 20kbps
|
||||
//
|
||||
// /* Configuration of upper interface with the upper layer of serial.c */
|
||||
// #define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
|
||||
// #define SERIAL_MASTER_BUFFER_LENGTH 1
|
||||
// //// USE simple API (using signle-type transaction function)
|
||||
// /* nothing */
|
||||
// //// USE flexible API (using multi-type transaction function)
|
||||
// #define SERIAL_USE_MULTI_TRANSACTION
|
||||
//
|
||||
// /////////////////////////////////////////////////////////////////
|
||||
|
||||
// Buffers for master - slave communication
|
||||
extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
|
||||
extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
|
||||
// Soft Serial Transaction Descriptor
|
||||
typedef struct _SSTD_t {
|
||||
uint8_t *status;
|
||||
uint8_t initiator2target_buffer_size;
|
||||
uint8_t *initiator2target_buffer;
|
||||
uint8_t target2initiator_buffer_size;
|
||||
uint8_t *target2initiator_buffer;
|
||||
} SSTD_t;
|
||||
#define TID_LIMIT( table ) (sizeof(table) / sizeof(SSTD_t))
|
||||
|
||||
void serial_master_init(void);
|
||||
void serial_slave_init(void);
|
||||
int serial_update_buffers(void);
|
||||
bool serial_slave_data_corrupt(void);
|
||||
// initiator is transaction start side
|
||||
void soft_serial_initiator_init(SSTD_t *sstd_table, int sstd_table_size);
|
||||
// target is interrupt accept side
|
||||
void soft_serial_target_init(SSTD_t *sstd_table, int sstd_table_size);
|
||||
|
||||
// initiator resullt
|
||||
#define TRANSACTION_END 0
|
||||
#define TRANSACTION_NO_RESPONSE 0x1
|
||||
#define TRANSACTION_DATA_ERROR 0x2
|
||||
#define TRANSACTION_TYPE_ERROR 0x4
|
||||
#ifndef SERIAL_USE_MULTI_TRANSACTION
|
||||
int soft_serial_transaction(void);
|
||||
#else
|
||||
int soft_serial_transaction(int sstd_index);
|
||||
#endif
|
||||
|
||||
// target status
|
||||
// *SSTD_t.status has
|
||||
// initiator:
|
||||
// TRANSACTION_END
|
||||
// or TRANSACTION_NO_RESPONSE
|
||||
// or TRANSACTION_DATA_ERROR
|
||||
// target:
|
||||
// TRANSACTION_DATA_ERROR
|
||||
// or TRANSACTION_ACCEPTED
|
||||
#define TRANSACTION_ACCEPTED 0x8
|
||||
#ifdef SERIAL_USE_MULTI_TRANSACTION
|
||||
int soft_serial_get_and_clean_status(int sstd_index);
|
||||
#endif
|
||||
|
||||
#endif /* SOFT_SERIAL_H */
|
||||
|
|
|
@ -1,11 +0,0 @@
|
|||
/* serial.h backward compatibility */
|
||||
|
||||
// #ifndef SOFT_SERIAL_PIN
|
||||
// #define SOFT_SERIAL_PIN D0
|
||||
// #endif
|
||||
|
||||
#ifndef SERIAL_SLAVE_BUFFER_LENGTH
|
||||
#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
|
||||
#define SERIAL_MASTER_BUFFER_LENGTH 1
|
||||
#endif
|
||||
|
|
@ -11,9 +11,6 @@
|
|||
#include "timer.h"
|
||||
#include "split_flags.h"
|
||||
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
# include "rgblight.h"
|
||||
#endif
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
# include "backlight.h"
|
||||
#endif
|
||||
|
@ -24,8 +21,6 @@
|
|||
|
||||
#if defined(USE_I2C) || defined(EH)
|
||||
# include "i2c.h"
|
||||
#else
|
||||
# include "serial.h"
|
||||
#endif
|
||||
|
||||
volatile bool isLeftHand = true;
|
||||
|
@ -112,7 +107,7 @@ void keyboard_slave_loop(void) {
|
|||
BACKLIT_DIRTY = false;
|
||||
}
|
||||
#else // USE_SERIAL
|
||||
backlight_set(serial_master_buffer[SERIAL_BACKLIT_START]);
|
||||
backlight_set(serial_m2s_buffer.backlight_level);
|
||||
#endif
|
||||
#endif
|
||||
// Read RGB Info
|
||||
|
@ -137,9 +132,11 @@ void keyboard_slave_loop(void) {
|
|||
sei();
|
||||
}
|
||||
#else // USE_SERIAL
|
||||
#ifdef RGBLIGHT_SPLIT
|
||||
// Add serial implementation for RGB here
|
||||
#endif
|
||||
#endif
|
||||
#endif
|
||||
}
|
||||
}
|
||||
|
||||
|
|
|
@ -7,9 +7,6 @@
|
|||
#include <stdlib.h>
|
||||
#include "eeconfig.h"
|
||||
|
||||
// backlight level store index in serial_master_buffer[] for slave to read
|
||||
#define SERIAL_BACKLIT_START 0x00
|
||||
|
||||
#define SLAVE_I2C_ADDRESS 0x32
|
||||
|
||||
extern volatile bool isLeftHand;
|
||||
|
|
Loading…
Reference in New Issue