[Keyboard] Add millipad keypad and default keymap (#12522)

master
GLozares 2021-04-20 09:15:21 -07:00 committed by GitHub
parent 3d37afd495
commit 666944df2e
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
8 changed files with 266 additions and 0 deletions

View File

@ -0,0 +1,94 @@
/*
Copyright 2021 Jirou
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x1A1B
#define DEVICE_VER 0x0001
#define MANUFACTURER Jirou
#define PRODUCT millipad
/* key matrix size */
#define MATRIX_ROWS 2
#define MATRIX_COLS 6
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { C6, C7 }
#define MATRIX_COL_PINS { F0, F1, F4, D7, D6, D4 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
#define LOCKING_RESYNC_ENABLE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
#define FORCE_NKRO
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
/* Bootmagic Lite key configuration */
//#define BOOTMAGIC_LITE_ROW 0
//#define BOOTMAGIC_LITE_COLUMN 0
/* Encoder Definitions */
#define ENCODERS_PAD_A { D3 }
#define ENCODERS_PAD_B { D2 }
#define ENCODER_RESOLUTION 4

View File

@ -0,0 +1,26 @@
{
"keyboard_name": "millipad",
"url": "https://github.com/GLozares/millipad",
"maintainer": "Jirou",
"width": 6,
"height": 2,
"layouts": {
"LAYOUT": {
"layout": [
{"label": "k00", "x": 0, "y": 0},
{"label": "k01", "x": 1, "y": 0},
{"label": "k02", "x": 2, "y": 0},
{"label": "k03", "x": 3, "y": 0},
{"label": "k04", "x": 4, "y": 0},
{"label": "k05", "x": 5, "y": 0},
{"label": "k10", "x": 0, "y": 1},
{"label": "k11", "x": 1, "y": 1},
{"label": "k12", "x": 2, "y": 1},
{"label": "k13", "x": 3, "y": 1},
{"label": "k14", "x": 4, "y": 1},
{"label": "k15", "x": 5, "y": 1}
]
}
}
}

View File

@ -0,0 +1,41 @@
/* Copyright 2021 Jirou
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
// Defines names for use in layer keycodes and the keymap
enum layer_names {
_BASE
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT(
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F11,
KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F12
)
};
void encoder_update_user(uint8_t index, bool clockwise) {
if (index == 0) { /* First encoder */
if (clockwise) {
tap_code(KC_VOLU);
} else {
tap_code(KC_VOLD);
}
}
}

View File

@ -0,0 +1 @@
# The default keymap for millipad

View File

@ -0,0 +1,17 @@
/* Copyright 2021 Jirou
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "millipad.h"

View File

@ -0,0 +1,35 @@
/* Copyright 2021 Jirou
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
/* This is a shortcut to help you visually see your layout.
*
* The first section contains all of the arguments representing the physical
* layout of the board and position of the keys.
*
* The second converts the arguments into a two-dimensional array which
* represents the switch matrix.
*/
#define LAYOUT( \
k00, k01, k02, k03, k04, k05, \
k10, k11, k12, k13, k14, k15 \
) { \
{ k00, k01, k02, k03, k04, k05 }, \
{ k10, k11, k12, k13, k14, k15 } \
}

View File

@ -0,0 +1,29 @@
# millipad
![millipad](https://i.imgur.com/ZM2qel5h.jpg)
An open source 2x6 macropad with rotary encoder. Designed to be cheap and simple.
## More Pictures:
![PCB Layout](https://i.imgur.com/ilhfBfQ.png)
![Front of PCB](https://i.imgur.com/UiQkmuvh.jpg)
![Back of PCB](https://i.imgur.com/Inh6UTLh.jpg)
* Keyboard Maintainer: [Jirou](https://github.com/GLozares)
* Hardware Supported: Jirou.Design Millipad
* Hardware Availability: Open Source at https://github.com/GLozares/millipad
## Bootloader Mode (Flashing Hex Files):
To flash a new hex file, press the hardware reset button located to the left of the rotary encoder to enter Bootloader mode.
Make example for this keyboard (after setting up your build environment):
make millipad:default
Flashing example for this keyboard:
make millipad:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -0,0 +1,23 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
ENCODER_ENABLE = yes