Merge branch 'm0110a'

master
tmk 2012-05-24 14:21:52 +09:00
commit 660ea5a2cd
10 changed files with 630 additions and 300 deletions

490
m0110.c
View File

@ -1,5 +1,5 @@
/* /*
Copyright 2011 Jun WAKO <wakojun@gmail.com> Copyright 2011,2012 Jun WAKO <wakojun@gmail.com>
This software is licensed with a Modified BSD License. This software is licensed with a Modified BSD License.
All of this is supposed to be Free Software, Open Source, DFSG-free, All of this is supposed to be Free Software, Open Source, DFSG-free,
@ -34,6 +34,7 @@ CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE. POSSIBILITY OF SUCH DAMAGE.
*/ */
/* M0110A Support was contributed by skagon@github */
#include <stdbool.h> #include <stdbool.h>
#include <avr/io.h> #include <avr/io.h>
@ -43,6 +44,9 @@ POSSIBILITY OF SUCH DAMAGE.
#include "debug.h" #include "debug.h"
static inline uint8_t raw2scan(uint8_t raw);
static inline uint8_t inquiry(void);
static inline uint8_t instant(void);
static inline void clock_lo(void); static inline void clock_lo(void);
static inline void clock_hi(void); static inline void clock_hi(void);
static inline bool clock_in(void); static inline bool clock_in(void);
@ -57,130 +61,6 @@ static inline void idle(void);
static inline void request(void); static inline void request(void);
/*
Primitive M0110 Library for AVR
==============================
Signaling
---------
CLOCK is always from KEYBOARD. DATA are sent with MSB first.
1) IDLE: both lines are high.
CLOCK ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DATA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2) KEYBOARD->HOST: HOST reads bit on rising edge.
CLOCK ~~~~~~~~~~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~~~~~~~~~
DATA ~~~~~~~~~~~~X777777X666666X555555X444444X333333X222222X111111X000000X~~~~~~~
<--> 160us(clock low)
<---> 180us(clock high)
3) HOST->KEYBOARD: HOST asserts bit on falling edge.
CLOCK ~~~~~~~~~~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~~~~~~~~~
DATA ~~~~~~|_____X777777X666666X555555X444444X333333X222222X111111X000000X~~~~~~~
<----> 840us(request to send by host) <---> 80us(hold DATA)
<--> 180us(clock low)
<---> 220us(clock high)
Protocol
--------
COMMAND:
Inquiry 0x10 get key event
Instant 0x12 get key event
Model 0x14 get model number(M0110 responds with 0x09)
bit 7 1 if another device connected(used when keypad exists?)
bit4-6 next device model number
bit1-3 keyboard model number
bit 0 always 1
Test 0x16 test(ACK:0x7D/NAK:0x77)
KEY EVENT:
bit 7 key state(0:press 1:release)
bit 6-1 scan code(see below)
bit 0 always 1
To get scan code use this: ((bits&(1<<7)) | ((bits&0x7F))>>1).
Note: On the M0110A, the numpad keys and the arrow keys are preceded by 0x79.
Moreover, the numpad keys =, /, * and + are preceded by shift-down 0x71 on press and shift-up 0xF1 on release.
So, the data transferred by nupmad 5 is "79 2F" whereas for numpad + it's "71 79 0D".
SCAN CODE:
m0111_recv_key() function returns follwing scan codes instead of raw key events.
Scan codes are 1 byte long and bit7 is set when key is released.
M0110
,---------------------------------------------------------.
| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs|
|---------------------------------------------------------|
|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
|---------------------------------------------------------|
|CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return|
|---------------------------------------------------------|
|Shift | Z| X| C| V| B| N| M| ,| ,| /| |
`---------------------------------------------------------'
|Opt|Mac | Space |Enter|Opt|
`------------------------------------------------'
,---------------------------------------------------------.
| 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33|
|---------------------------------------------------------|
| 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| 2A|
|---------------------------------------------------------|
| 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24|
|---------------------------------------------------------|
| 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 38|
`---------------------------------------------------------'
| 3A| 37| 31 | 34| 3A|
`------------------------------------------------'
M0110A
,---------------------------------------------------------. ,---------------.
| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bcksp| |Clr| =| /| *|
|---------------------------------------------------------| |---------------|
|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
|-----------------------------------------------------' | |---------------|
|CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +|
|---------------------------------------------------------| |---------------|
|Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| |
|---------------------------------------------------------' |-----------|Ent|
|Optio|Mac | Space | \|Lft|Rgt|Dn | | 0| .| |
`---------------------------------------------------------' `---------------'
,---------------------------------------------------------. ,---------------.
| 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| | 47| 68| 6D| 62|
|---------------------------------------------------------| |---------------|
| 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| | | 59| 5B| 5C| 4E|
|-----------------------------------------------------' | |---------------|
| 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | 56| 57| 58| 66|
|---------------------------------------------------------| |---------------|
| 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 38| 4D| | 53| 54| 55| |
|---------------------------------------------------------' |-----------| 4C|
| 3A| 37| 31 | 2A| 46| 42| 48| | 52| 41| |
`---------------------------------------------------------' `---------------'
References
----------
Technical Info for 128K/512K and Plus
ftp://ftp.apple.asimov.net/pub/apple_II/documentation/macintosh/Mac%20Hardware%20Info%20-%20Mac%20128K.pdf
ftp://ftp.apple.asimov.net/pub/apple_II/documentation/macintosh/Mac%20Hardware%20Info%20-%20Mac%20Plus.pdf
Protocol:
Page 20 of Tech Info for 128K/512K
http://www.mac.linux-m68k.org/devel/plushw.php
Connector:
Page 20 of Tech Info for 128K/512K
http://www.kbdbabel.org/conn/kbd_connector_macplus.png
Signaling:
http://www.kbdbabel.org/signaling/kbd_signaling_mac.png
http://typematic.blog.shinobi.jp/Entry/14/
Scan Codes:
Page 22 of Tech Info for 128K/512K
Page 07 of Tech Info for Plus
http://m0115.web.fc2.com/m0110.jpg
http://m0115.web.fc2.com/m0110a.jpg
*/
#define WAIT_US(stat, us, err) do { \ #define WAIT_US(stat, us, err) do { \
if (!wait_##stat(us)) { \ if (!wait_##stat(us)) { \
m0110_error = err; \ m0110_error = err; \
@ -202,6 +82,9 @@ Scan Codes:
} \ } \
} while (0) } while (0)
#define KEY(raw) ((raw) & 0x7f)
#define IS_BREAK(raw) (((raw) & 0x80) == 0x80)
uint8_t m0110_error = 0; uint8_t m0110_error = 0;
@ -212,10 +95,6 @@ void m0110_init(void)
idle(); idle();
_delay_ms(1000); _delay_ms(1000);
// Model Number
// M0110 : 0x09 00001001 : model number 4 (100)
// M0110A: 0x0B 00001011 : model number 5 (101)
// M0110 & M0120: ???
m0110_send(M0110_MODEL); m0110_send(M0110_MODEL);
data = m0110_recv(); data = m0110_recv();
print("m0110_init model: "); phex(data); print("\n"); print("m0110_init model: "); phex(data); print("\n");
@ -273,18 +152,180 @@ ERROR:
return 0xFF; return 0xFF;
} }
/*
Handling for exceptional case of key combinations for M0110A
Shift and Calc/Arrow key could be operated simultaneously:
Case Shift Arrow Events Interpret
-------------------------------------------------------------------
1 Down Down 71, 79, DD Calc(d)*a *b
2 Down Up 71, 79, UU Arrow&Calc(u)*a
3 Up Down F1, 79, DD Shift(u) *c
4 Up Up F1, 79, UU Shift(u) and Arrow&Calc(u)*a
Case Shift Calc Events Interpret
-------------------------------------------------------------------
5(1) Down Down 71, 71, 79, DD Shift(d) and Cacl(d)
6(2) Down Up F1, 71, 79, UU Shift(u) and Arrow&Calc(u)*a
7(1) Up Down F1, 71, 79, DD Shift(u) and Calc(d)
8(4) Up Up F1, F1, 79, UU Shift(ux2) and Arrow&Calc(u)*a
During Calc key is hold:
Case Shift Arrow Events Interpret
-------------------------------------------------------------------
A(3) ---- Down F1, 79, DD Shift(u) *c
B ---- Up 79, UU Arrow&Calc(u)*a
C Down ---- F1, 71 Shift(u) and Shift(d)
D Up ---- F1 Shift(u)
E Hold Down 79, DD Normal
F Hold Up 79, UU Arrow&Calc(u)*a
G(1) Down Down F1, 71, 79, DD Shift(u)*b and Calc(d)*a
H(2) Down Up F1, 71, 79, UU Shift(u) and Arrow&Calc(u)*a
I(3) Up Down F1, F1, 79, DD Shift(ux2) *c
J(4) Up Up F1, 79, UU Shift(u) and Arrow&Calc(u)*a
Case Shift Calc Events Interpret
-------------------------------------------------------------------
K(1) ---- Down 71, 79, DD Calc(d)*a
L(4) ---- Up F1, 79, UU Shift(u) and Arrow&Calc(u)*a
M(1) Hold Down 71, 79, DD Calc(d)*a
N Hold Up 79, UU Arrow&Calc(u)*a
Where DD/UU indicates part of Keypad Down/Up event.
*a: Impossible to distinguish btween Arrow and Calc event.
*b: Shift(d) event is ignored.
*c: Arrow/Calc(d) event is ignored.
*/
uint8_t m0110_recv_key(void) uint8_t m0110_recv_key(void)
{ {
uint8_t key; static uint8_t keybuf = 0x00;
m0110_send(M0110_INQUIRY); static uint8_t keybuf2 = 0x00;
key = m0110_recv(); static uint8_t rawbuf = 0x00;
if (key == 0xFF || key == M0110_NULL) uint8_t raw, raw2, raw3;
return M0110_NULL;
else if (keybuf) {
return M0110_RAW2SCAN(key); raw = keybuf;
keybuf = 0x00;
return raw;
}
if (keybuf2) {
raw = keybuf2;
keybuf2 = 0x00;
return raw;
}
if (rawbuf) {
raw = rawbuf;
rawbuf = 0x00;
} else {
raw = instant(); // Use INSTANT for better response. Should be INQUIRY ?
}
switch (KEY(raw)) {
case M0110_KEYPAD:
raw2 = instant();
switch (KEY(raw2)) {
case M0110_ARROW_UP:
case M0110_ARROW_DOWN:
case M0110_ARROW_LEFT:
case M0110_ARROW_RIGHT:
if (IS_BREAK(raw2)) {
// Case B,F,N:
keybuf = (raw2scan(raw2) | M0110_CALC_OFFSET); // Calc(u)
return (raw2scan(raw2) | M0110_KEYPAD_OFFSET); // Arrow(u)
}
break;
}
// Keypad or Arrow
return (raw2scan(raw2) | M0110_KEYPAD_OFFSET);
break;
case M0110_SHIFT:
raw2 = instant();
switch (KEY(raw2)) {
case M0110_SHIFT:
// Case: 5-8,C,G,H
rawbuf = raw2;
return raw2scan(raw); // Shift(d/u)
break;
case M0110_KEYPAD:
// Shift + Arrow, Calc, or etc.
raw3 = instant();
switch (KEY(raw3)) {
case M0110_ARROW_UP:
case M0110_ARROW_DOWN:
case M0110_ARROW_LEFT:
case M0110_ARROW_RIGHT:
if (IS_BREAK(raw)) {
if (IS_BREAK(raw3)) {
// Case 4:
print("(4)\n");
keybuf2 = raw2scan(raw); // Shift(u)
keybuf = (raw2scan(raw3) | M0110_CALC_OFFSET); // Calc(u)
return (raw2scan(raw3) | M0110_KEYPAD_OFFSET); // Arrow(u)
} else {
// Case 3:
print("(3)\n");
return (raw2scan(raw)); // Shift(u)
}
} else {
if (IS_BREAK(raw3)) {
// Case 2:
print("(2)\n");
keybuf = (raw2scan(raw3) | M0110_CALC_OFFSET); // Calc(u)
return (raw2scan(raw3) | M0110_KEYPAD_OFFSET); // Arrow(u)
} else {
// Case 1:
print("(1)\n");
return (raw2scan(raw3) | M0110_CALC_OFFSET); // Calc(d)
}
}
break;
default:
// Shift + Keypad
keybuf = (raw2scan(raw3) | M0110_KEYPAD_OFFSET);
return raw2scan(raw); // Shift(d/u)
break;
}
break;
default:
// Shift + Normal keys
keybuf = raw2scan(raw2);
return raw2scan(raw); // Shift(d/u)
break;
}
break;
default:
// Normal keys
return raw2scan(raw);
break;
}
} }
static inline uint8_t raw2scan(uint8_t raw) {
return (raw == M0110_NULL) ? M0110_NULL : (
(raw == M0110_ERROR) ? M0110_ERROR : (
((raw&0x80) | ((raw&0x7F)>>1))
)
);
}
static inline uint8_t inquiry(void)
{
m0110_send(M0110_INQUIRY);
return m0110_recv();
}
static inline uint8_t instant(void)
{
m0110_send(M0110_INSTANT);
uint8_t data = m0110_recv();
if (data != M0110_NULL) {
phex(data); print(" ");
}
return data;
}
static inline void clock_lo() static inline void clock_lo()
{ {
M0110_CLOCK_PORT &= ~(1<<M0110_CLOCK_BIT); M0110_CLOCK_PORT &= ~(1<<M0110_CLOCK_BIT);
@ -354,3 +395,180 @@ static inline void request(void)
clock_hi(); clock_hi();
data_lo(); data_lo();
} }
/*
Primitive M0110 Library for AVR
==============================
Signaling
---------
CLOCK is always from KEYBOARD. DATA are sent with MSB first.
1) IDLE: both lines are high.
CLOCK ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
DATA ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2) KEYBOARD->HOST: HOST reads bit on rising edge.
CLOCK ~~~~~~~~~~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~~~~~~~~~
DATA ~~~~~~~~~~~~X777777X666666X555555X444444X333333X222222X111111X000000X~~~~~~~
<--> 160us(clock low)
<---> 180us(clock high)
3) HOST->KEYBOARD: HOST asserts bit on falling edge.
CLOCK ~~~~~~~~~~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~|__|~~~~~~~~~~~
DATA ~~~~~~|_____X777777X666666X555555X444444X333333X222222X111111X000000X~~~~~~~
<----> 840us(request to send by host) <---> 80us(hold DATA)
<--> 180us(clock low)
<---> 220us(clock high)
Protocol
--------
COMMAND:
Inquiry 0x10 get key event with block
Instant 0x12 get key event
Model 0x14 get model number(M0110 responds with 0x09)
bit 7 1 if another device connected(used when keypad exists?)
bit4-6 next device model number
bit1-3 keyboard model number
bit 0 always 1
Test 0x16 test(ACK:0x7D/NAK:0x77)
KEY EVENT:
bit 7 key state(0:press 1:release)
bit 6-1 scan code(see below)
bit 0 always 1
To get scan code use this: ((bits&(1<<7)) | ((bits&0x7F))>>1).
Note: On the M0110A, Keypad keys and Arrow keys are preceded by 0x79.
Moreover, some Keypad keys(=, /, * and +) are preceded by 0x71 on press and 0xF1 on release.
ARROW KEYS:
Arrow keys and Calc keys(+,*,/,= on keypad) share same byte sequence and preceding byte of
Calc keys(0x71 and 0xF1) means press and release event of SHIFT. This causes a very confusing situation,
it is difficult or impossible to tell Calc key from Arrow key plus SHIFT in some cases.
Raw key events:
press release
---------------- ----------------
Left: 0x79, 0x0D 0x79, 0x8D
Right: 0x79, 0x05 0x79, 0x85
Up: 0x79, 0x1B 0x79, 0x9B
Down: 0x79, 0x11 0x79, 0x91
Pad+: 0x71, 0x79, 0x0D 0xF1, 0x79, 0x8D
Pad*: 0x71, 0x79, 0x05 0xF1, 0x79, 0x85
Pad/: 0x71, 0x79, 0x1B 0xF1, 0x79, 0x9B
Pad=: 0x71, 0x79, 0x11 0xF1, 0x79, 0x91
RAW CODE:
M0110A
,---------------------------------------------------------. ,---------------.
| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bcksp| |Clr| =| /| *|
|---------------------------------------------------------| |---------------|
|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
|-----------------------------------------------------' | |---------------|
|CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +|
|---------------------------------------------------------| |---------------|
|Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| |
|---------------------------------------------------------' |-----------|Ent|
|Optio|Mac | Space | \|Lft|Rgt|Dn | | 0| .| |
`---------------------------------------------------------' `---------------'
,---------------------------------------------------------. ,---------------.
| 65| 25| 27| 29| 2B| 2F| 2D| 35| 39| 33| 3B| 37| 31| 67| |+0F|*11|*1B|*05|
|---------------------------------------------------------| |---------------|
| 61| 19| 1B| 1D| 1F| 23| 21| 41| 45| 3F| 47| 43| 3D| | |+33|+37|+39|+1D|
|-----------------------------------------------------' | |---------------|
| 73| 01| 03| 05| 07| 0B| 09| 4D| 51| 4B| 53| 4F| 49| |+2D|+2F|+31|*0D|
|---------------------------------------------------------| |---------------|
| 71| 0D| 0F| 11| 13| 17| 5B| 5D| 27| 5F| 59| 71|+1B| |+27|+29|+2B| |
|---------------------------------------------------------' |-----------|+19|
| 75| 6F| 63 | 55|+0D|+05|+11| | +25|+03| |
`---------------------------------------------------------' `---------------'
+ 0x79, 0xDD / 0xF1, 0xUU
* 0x71, 0x79,DD / 0xF1, 0x79, 0xUU
MODEL NUMBER:
M0110: 0x09 00001001 : model number 4 (100)
M0110A: 0x0B 00001011 : model number 5 (101)
M0110 & M0120: ???
Scan Code
---------
m0110_recv_key() function returns following scan codes instead of raw key events.
Scan codes are 1 byte long and MSB(bit7) is set when key is released.
M0110
,---------------------------------------------------------.
| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs|
|---------------------------------------------------------|
|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
|---------------------------------------------------------|
|CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return|
|---------------------------------------------------------|
|Shift | Z| X| C| V| B| N| M| ,| ,| /| |
`---------------------------------------------------------'
|Opt|Mac | Space |Enter|Opt|
`------------------------------------------------'
,---------------------------------------------------------.
| 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33|
|---------------------------------------------------------|
| 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| 2A|
|---------------------------------------------------------|
| 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24|
|---------------------------------------------------------|
| 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 38|
`---------------------------------------------------------'
| 3A| 37| 31 | 34| 3A|
`------------------------------------------------'
M0110A
,---------------------------------------------------------. ,---------------.
| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bcksp| |Clr| =| /| *|
|---------------------------------------------------------| |---------------|
|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
|-----------------------------------------------------' | |---------------|
|CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +|
|---------------------------------------------------------| |---------------|
|Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| |
|---------------------------------------------------------' |-----------|Ent|
|Optio|Mac | Space | \|Lft|Rgt|Dn | | 0| .| |
`---------------------------------------------------------' `---------------'
,---------------------------------------------------------. ,---------------.
| 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| | 47| 68| 6D| 62|
|---------------------------------------------------------| |---------------|
| 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| | | 59| 5B| 5C| 4E|
|-----------------------------------------------------' | |---------------|
| 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | 56| 57| 58| 66|
|---------------------------------------------------------| |---------------|
| 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 38| 4D| | 53| 54| 55| |
|---------------------------------------------------------' |-----------| 4C|
| 3A| 37| 31 | 2A| 46| 42| 48| | 52| 41| |
`---------------------------------------------------------' `---------------'
References
----------
Technical Info for 128K/512K and Plus
ftp://ftp.apple.asimov.net/pub/apple_II/documentation/macintosh/Mac%20Hardware%20Info%20-%20Mac%20128K.pdf
ftp://ftp.apple.asimov.net/pub/apple_II/documentation/macintosh/Mac%20Hardware%20Info%20-%20Mac%20Plus.pdf
Protocol:
Page 20 of Tech Info for 128K/512K
http://www.mac.linux-m68k.org/devel/plushw.php
Connector:
Page 20 of Tech Info for 128K/512K
http://www.kbdbabel.org/conn/kbd_connector_macplus.png
Signaling:
http://www.kbdbabel.org/signaling/kbd_signaling_mac.png
http://typematic.blog.shinobi.jp/Entry/14/
Scan Codes:
Page 22 of Tech Info for 128K/512K
Page 07 of Tech Info for Plus
http://m0115.web.fc2.com/m0110.jpg
http://m0115.web.fc2.com/m0110a.jpg
*/

34
m0110.h
View File

@ -1,5 +1,5 @@
/* /*
Copyright 2011 Jun WAKO <wakojun@gmail.com> Copyright 2011,2012 Jun WAKO <wakojun@gmail.com>
This software is licensed with a Modified BSD License. This software is licensed with a Modified BSD License.
All of this is supposed to be Free Software, Open Source, DFSG-free, All of this is supposed to be Free Software, Open Source, DFSG-free,
@ -54,23 +54,29 @@ POSSIBILITY OF SUCH DAMAGE.
# error "M0110 data port setting is required in config.h" # error "M0110 data port setting is required in config.h"
#endif #endif
#define M0110_INQUIRY 0x10 /* Commands */
#define M0110_INSTANT 0x14 #define M0110_INQUIRY 0x10
#define M0110_MODEL 0x16 #define M0110_INSTANT 0x14
#define M0110_TEST 0x36 #define M0110_MODEL 0x16
#define M0110_TEST 0x36
#define M0110_PAD 0x79 /* Response(raw byte from M0110) */
#define M0110_NULL 0x7B #define M0110_NULL 0x7B
#define M0110_TEST_ACK 0x7D #define M0110_KEYPAD 0x79
#define M0110_TEST_NAK 0x77 #define M0110_TEST_ACK 0x7D
#define M0110_TEST_NAK 0x77
#define M0110_SHIFT 0x71
#define M0110_ARROW_UP 0x1B
#define M0110_ARROW_DOWN 0x11
#define M0110_ARROW_LEFT 0x0D
#define M0110_ARROW_RIGHT 0x05
/* This inidcates no response. */
#define M0110_ERROR 0xFF
/* scan code offset for keypad and arrow keys */ /* scan code offset for keypad and arrow keys */
#define M0110_KEYPAD_OFFSET 0x40 #define M0110_KEYPAD_OFFSET 0x40
#define M0110_ARROW_OFFSET 0x60 #define M0110_CALC_OFFSET 0x60
/* convert key event raw response into scan code */
#define M0110_RAW2SCAN(key) ((key&(1<<7)) | ((key&0x7F)>>1))
extern uint8_t m0110_error; extern uint8_t m0110_error;
@ -80,5 +86,7 @@ void m0110_init(void);
uint8_t m0110_send(uint8_t data); uint8_t m0110_send(uint8_t data);
uint8_t m0110_recv(void); uint8_t m0110_recv(void);
uint8_t m0110_recv_key(void); uint8_t m0110_recv_key(void);
uint8_t m0110_inquiry(void);
uint8_t m0110_instant(void);
#endif #endif

View File

@ -1,55 +0,0 @@
M0110 to USB keyboard converter
===============================
This firmware converts the protocol of Apple Macintosh keyboard M0110 into USB.
Connection
----------
You need 4P4C plug and cable to connect Teensy into M0110.
Teensy port F0 is assigned for CLOCK line and F1 for DATA by default, you can change pin configuration with editing config.h..
Plug:
http://en.wikipedia.org/wiki/Modular_connector#4P4C
Pinout:
http://www.kbdbabel.org/conn/kbd_connector_macplus.png
1(Black): GND
2(Red): CLOCK
3(Green): DATA
4(Yellow): +5V
Build Frimware
--------------
Optionally edit Makefile and config.h for build options, pin configuration or MCU.
$ cd m0110_usb
$ make
and program your Teensy with loader.
Keymap
------
You can change a keymap by editing code of keymap.c like following.
How to define the keymap is probably obvious. You can find key symbols in usb_keycodes.h.
This is a default keymap for M0110.
,---------------------------------------------------------.
| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bacpa|
|---------------------------------------------------------|
|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
|---------------------------------------------------------|
|CapsLo| A| S| D| F| G| H| J| K| L| ;| '|Return|
|---------------------------------------------------------|
|Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift |
`---------------------------------------------------------'
|Opt|Alt | Space |Alt |Opt|
`-----------------------------------------------'
Notes
-----
EOF

126
m0110_usb/README.md 100644
View File

@ -0,0 +1,126 @@
M0110/M0110A to USB keyboard converter
======================================
This firmware converts the protocol of Apple Macintosh keyboard M0110/M0110A into USB.
Target board of this project is [PJRC Teensy](http://www.pjrc.com/teensy/), though,
you can use other board with USB AVR like `ATmega32U4` and `AT90USB`.
![M0110](https://github.com/tmk/tmk_keyboard/raw/master/m0110_usb/doc/m0110.jpg)
M0110A support was contributed by [skagon@github](https://github.com/skagon).
Connection
----------
You need 4P4C plug and cable to connect Teensy or other AVR dev board into the keyboard.
Teensy port `PF0` is assigned for `CLOCK` line and `PF1` for `DATA` by default,
you can change pin configuration with editing *config.h*.
You can find 4P4C plugs on telephone handset cable. Note that it is *crossover* connection
while Macintosh keyboard cable is *straight*.
[![Conection](http://i.imgur.com/vJoVOm.jpg)](http://i.imgur.com/vJoVO.jpg)
In this pic:
1. `GND`(Black)
2. `CLOCK`(Red)
3. `DATA`(Green)
4. `+5V`(Yellow)
Not that wire colors may vary in your cable.
### Pinout
- <http://pinouts.ru/Inputs/MacKeyboard_pinout.shtml>
- <http://en.wikipedia.org/wiki/Modular_connector#4P4C>
![Jack fig](http://www.kbdbabel.org/conn/kbd_connector_macplus.png)
### Pull-up Registor
You may need pull-up registors on signal lines(`CLOCK`, `DATA`) in particular
when you have long or coiled cable. 1k-10k Ohm will be OK for this purpose.
In some cases MCU can't read signal from keyboard correctly without pull-up resistors.
Building Frimware
-----------------
To compile firmware you need AVR GCC. You can use [WinAVR](http://winavr.sourceforge.net/) on Windows.
You can edit *Makefile* and *config.h* to change compile options and pin configuration.
$ git clone ... (or download source)
$ cd m0110_usb
$ make
and program your Teensy with [PJRC Teensy loader](http://www.pjrc.com/teensy/loader.html).
Keymap
------
You can change keymaps by editing *keymap.c*.
### M0110
#### *Default*
,---------------------------------------------------------.
| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs|
|---------------------------------------------------------|
|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
|---------------------------------------------------------|
|Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return|
|---------------------------------------------------------|
|Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift |
`---------------------------------------------------------'
|Ctr|Alt | Space |Gui |Ctr|
`-----------------------------------------------'
You can register Esc by hitting(press&release) Fn0 quickly.
#### *HHKB/WASD cursor Layer(Fn0)*
,---------------------------------------------------------.
|Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet|
|---------------------------------------------------------|
|Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| \|
|---------------------------------------------------------|
|Fn0 |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return|
|---------------------------------------------------------|
|Shift |End| |PgD| |VoD|VoU|Mut|End|PgD|Dow|Shift |
`---------------------------------------------------------'
|Ctr|Alt | Space |Gui |Ctr|
`-----------------------------------------------'
### M0110A
#### *Default*
,---------------------------------------------------------. ,---------------.
| `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Gui| =| /| *|
|---------------------------------------------------------| |---------------|
|Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
|-----------------------------------------------------' | |---------------|
|Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +|
|---------------------------------------------------------| |---------------|
|Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| |
|---------------------------------------------------------| |-----------|Ent|
|Ctrl |Alt | Space | \|Lft|Rgt|Dn | | 0| .| |
`---------------------------------------------------------' `---------------'
#### *HHKB/WASD cursor Layer(Fn0)*
,---------------------------------------------------------. ,---------------.
|Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk|Mb1|Mb3|Mb2|
|---------------------------------------------------------| |---------------|
|Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | |MwD|McU|MwU|MwU|
|-----------------------------------------------------' | |---------------|
|Fn0 |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| |McL|McD|McR|MwD|
|---------------------------------------------------------| |---------------|
|Shift |End| |PgD| |VoD|VoU|Mut|End|PgD|Dow|Shif|Up | |MwL|McD|MwR| |
|---------------------------------------------------------| |-----------|Mb2|
|Ctrl |Alt | Space |Gui | \|Lft|Rgt|Dn | | Mb1|Mb3| |
`---------------------------------------------------------' `---------------'
Debug
-----
You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output.
The converter has some functions for debug, press `Alt+Gui+H` simultaneously to get help.
These function is totally undocumented, tentative, inconsistent and buggy.

View File

@ -1,5 +1,5 @@
/* /*
Copyright 2011 Jun Wako <wakojun@gmail.com> Copyright 2011,2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by it under the terms of the GNU General Public License as published by
@ -30,7 +30,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* matrix size */ /* matrix size */
#define MATRIX_ROWS 8 #define MATRIX_ROWS 14
#define MATRIX_COLS 8 #define MATRIX_COLS 8
/* Locking Caps Lock support */ /* Locking Caps Lock support */
@ -38,8 +38,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* key combination for command */ /* key combination for command */
#define IS_COMMAND() ( \ #define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_LCTRL) | MOD_BIT(KB_LALT) | MOD_BIT(KB_LGUI)) || \ keyboard_report->mods == (MOD_BIT(KB_LALT) | MOD_BIT(KB_LGUI)) \
keyboard_report->mods == (MOD_BIT(KB_LSHIFT) | MOD_BIT(KB_RSHIFT)) \
) )

0
m0110_usb/doc/m0110.jpg 100755 → 100644
View File

Before

Width:  |  Height:  |  Size: 48 KiB

After

Width:  |  Height:  |  Size: 48 KiB

0
m0110_usb/doc/teensy.jpg 100755 → 100644
View File

Before

Width:  |  Height:  |  Size: 49 KiB

After

Width:  |  Height:  |  Size: 49 KiB

View File

@ -1,5 +1,5 @@
/* /*
Copyright 2011 Jun Wako <wakojun@gmail.com> Copyright 2011,2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by it under the terms of the GNU General Public License as published by
@ -14,10 +14,8 @@ GNU General Public License for more details.
You should have received a copy of the GNU General Public License You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>. along with this program. If not, see <http://www.gnu.org/licenses/>.
*/ */
/* M0110A Support was contributed by skagon@github */
/*
* Keymap for ADB keyboard
*/
#include <stdint.h> #include <stdint.h>
#include <stdbool.h> #include <stdbool.h>
#include <avr/pgmspace.h> #include <avr/pgmspace.h>
@ -31,16 +29,12 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)])) #define KEYCODE(layer, row, col) (pgm_read_byte(&keymaps[(layer)][(row)][(col)]))
// Convert physical keyboard layout to matrix array.
// This is a macro to define keymap easily in keyboard layout form.
// TODO: layout for M0110A
/* M0110 */
#define KEYMAP( \ #define KEYMAP( \
K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, \ K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K47,K68,K6D,K62, \
K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,K2A, \ K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E, K59,K5B,K5C,K4E, \
K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27, K24, \ K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27, K24, K56,K57,K58,K66, \
K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C, \ K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C, K4D, K53,K54,K55,K4C, \
K3A,K37, K31, K34 \ K3A,K37, K31, K34,K2A,K46,K42,K48, K52, K41 \
) { \ ) { \
{ KB_##K00, KB_##K01, KB_##K02, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \ { KB_##K00, KB_##K01, KB_##K02, KB_##K03, KB_##K04, KB_##K05, KB_##K06, KB_##K07 }, \
{ KB_##K08, KB_##K09, KB_NO, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_##K0F }, \ { KB_##K08, KB_##K09, KB_NO, KB_##K0B, KB_##K0C, KB_##K0D, KB_##K0E, KB_##K0F }, \
@ -49,7 +43,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
{ KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_##K27 }, \ { KB_##K20, KB_##K21, KB_##K22, KB_##K23, KB_##K24, KB_##K25, KB_##K26, KB_##K27 }, \
{ KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_##K2F }, \ { KB_##K28, KB_##K29, KB_##K2A, KB_##K2B, KB_##K2C, KB_##K2D, KB_##K2E, KB_##K2F }, \
{ KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_NO, KB_NO, KB_##K37 }, \ { KB_##K30, KB_##K31, KB_##K32, KB_##K33, KB_##K34, KB_NO, KB_NO, KB_##K37 }, \
{ KB_##K38, KB_##K39, KB_##K3A, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO } \ { KB_##K38, KB_##K39, KB_##K3A, KB_NO, KB_NO, KB_NO, KB_NO, KB_NO }, \
{ KB_NO, KB_##K41, KB_##K42, KB_NO, KB_NO, KB_NO, KB_##K46, KB_##K47 }, \
{ KB_##K48, KB_NO, KB_NO, KB_NO, KB_##K4C, KB_##K4D, KB_##K4E, KB_NO }, \
{ KB_NO, KB_NO, KB_##K52, KB_##K53, KB_##K54, KB_##K55, KB_##K56, KB_##K57 }, \
{ KB_##K58, KB_##K59, KB_NO, KB_##K5B, KB_##K5C, KB_NO, KB_NO, KB_NO }, \
{ KB_NO, KB_NO, KB_##K62, KB_NO, KB_NO, KB_NO, KB_##K66, KB_NO }, \
{ KB_##K68, KB_NO, KB_NO, KB_NO, KB_NO, KB_##K6D, KB_NO, KB_NO }, \
} }
@ -58,7 +58,7 @@ static const uint8_t PROGMEM fn_layer[] = {
1, // Fn0 1, // Fn0
2, // Fn1 2, // Fn1
3, // Fn2 3, // Fn2
0, // Fn3 1, // Fn3
0, // Fn4 0, // Fn4
0, // Fn5 0, // Fn5
0, // Fn6 0, // Fn6
@ -68,10 +68,17 @@ static const uint8_t PROGMEM fn_layer[] = {
// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer. // Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
// See layer.c for details. // See layer.c for details.
static const uint8_t PROGMEM fn_keycode[] = { static const uint8_t PROGMEM fn_keycode[] = {
KB_SCOLON, // Fn0 #ifndef HASU
KB_SLASH, // Fn1 KB_ESC, // Fn0
KB_NO, // Fn1
KB_NO, // Fn2 KB_NO, // Fn2
KB_NO, // Fn3 KB_NO, // Fn3
#else
KB_NO, // Fn0
KB_SCOLON, // Fn1
KB_SLASH, // Fn2
KB_UP, // Fn3
#endif
KB_NO, // Fn4 KB_NO, // Fn4
KB_NO, // Fn5 KB_NO, // Fn5
KB_NO, // Fn6 KB_NO, // Fn6
@ -79,52 +86,100 @@ static const uint8_t PROGMEM fn_keycode[] = {
}; };
static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// LShift and RShift are logically same one button. /*
// LOption and ROption are logically same one button. * The keymap works with both M0110 and M0110A keyboards. As you can see, the M0110A is a superset
/* Default Layer: plain keymap * of the M0110 keyboard, with only one exception: 'Enter' in M0110 does not exist
* ,---------------------------------------------------------. * on the M0110A, but since it generates a unique scan code which is not used for some other key in
* | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bacpa| * the M0110A, they are totally interchangeable. In fact, the M0110A is functionally (almost)
* |---------------------------------------------------------| * identical to the combination of the M0110 along with the M0120 keypad. The only difference
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| * (which is causing some problems as you will read below) is that the M0110+M0120 don't have
* |---------------------------------------------------------| * dedicated arrow keys, while the M0110A does. However, the M0120 did have arrow keys, which
* |Contro| A| S| D| F| G| H| J| K| L|Fn0| '|Return| * doubled as the [comma], [/], [*] and [+] keys, when used with the [Shift] key. The M0110A has
* |---------------------------------------------------------| * substituted the [comma] key with the [=] key, however its scancode is the same.
* |Shift | Z| X| C| V| B| N| M| ,| ,|Fn1| Shift| *
* `---------------------------------------------------------' * Default:
* |Fn2|Alt | Space |Gui |Fn2| * ,---------------------------------------------------------. ,---------------.
* `-----------------------------------------------' * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Gui| =| /| *|
* |---------------------------------------------------------| |---------------|
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -|
* |-----------------------------------------------------' | |---------------|
* |Fn0 | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +|
* |---------------------------------------------------------| |---------------|
* |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| |
* |---------------------------------------------------------| |-----------|Ent|
* |Ctrl |Alt | Space |Gui| \|Lft|Rgt|Dn | | 0| .| |
* `---------------------------------------------------------' `---------------'
*
* HHKB/WASD/Mouse Layer(Fn0):
* ,---------------------------------------------------------. ,---------------.
* |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk|Mb1|Mb3|Mb2|
* |---------------------------------------------------------| |---------------|
* |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | |MwD|McU|MwU|MwU|
* |-----------------------------------------------------' | |---------------|
* |Fn0 |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| |McL|McD|McR|MwD|
* |---------------------------------------------------------| |---------------|
* |Shift |End| |PgD| |VoD|VoU|Mut|End|PgD|Dow|Shif|Up | |MwL|McD|MwR| |
* |---------------------------------------------------------| |-----------|Mb2|
* |Ctrl |Alt | Space |Gui | \|Lft|Rgt|Dn | | Mb1|Mb3| |
* `---------------------------------------------------------' `---------------'
* Mb: Mouse Button / Mc: Mouse Cursor / Mw: Mouse Wheel
*
* NOTE: You can register Esc by hitting(press&release) Fn0 quickly.
* NOTE: Gui between Space and \ is Enter on M0110 not exists on M0110A.
* NOTE: LShift and RShift are logically same key. (M0110, M0110A)
* NOTE: LOption and ROption are logically same key. (M0110)
*/ */
#ifndef HASU
KEYMAP( KEYMAP(
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, LGUI,EQL, PSLS,PAST,
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,BSLS, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS,
LCTL,A, S, D, F, G, H, J, K, L, FN0, QUOT, ENT, FN0, A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS,
LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN1, LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT,
FN2, LALT, SPC, LGUI LCTL,LALT, SPC, LGUI,BSLS,LEFT,RGHT,DOWN, P0, PDOT
),
// vi mousekeys
KEYMAP(
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL,
CAPS,NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, NO,
LCTL,VOLD,VOLU,MUTE,NO, NO, MS_L,MS_D,MS_U,MS_R,FN0, NO, ENT,
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,NO, NO, NO,
NO, LALT, BTN1, LGUI
),
// vi cusorkeys
KEYMAP(
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL,
CAPS,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, NO,
LCTL,NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT,
LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN1,
NO, LALT, SPC, LGUI
), ),
// HHKB & WASD // HHKB & WASD
KEYMAP( KEYMAP(
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,BTN1,BTN3,BTN2,
CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,BRK, UP, NO, NO, CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,BRK, UP, INS, WH_D,MS_U,WH_U,WH_U,
LCTL,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, FN0, LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, MS_L,MS_D,MS_R,WH_D,
LSFT,END, NO, PGDN,NO, VOLD,VOLU,MUTE,END, PGDN,DOWN, LSFT,END, NO, PGDN,NO, VOLD,VOLU,MUTE,END, PGDN,DOWN, UP, WH_L,MS_D,WH_R,BTN2,
FN2, LALT, SPC, LGUI LCTL,LALT, SPC, LGUI,BSLS,LEFT,RGHT,DOWN, BTN1, BTN3
), ),
#else
// hasu's keymap
// To enable use this 'make' option: make EXTRAFLAGS=-DHASU
KEYMAP(
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, LGUI,EQL, PSLS,PAST,
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS,
LCTL,A, S, D, F, G, H, J, K, L, FN1, QUOT, ENT, P4, P5, P6, PPLS,
LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, FN3, P1, P2, P3, PENT,
LCTL,LALT, SPC, LGUI,BSLS,LEFT,RGHT,DOWN, LGUI, PDOT
),
// HHKB & WASD
KEYMAP(
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,BRK, UP, INS, P7, P8, P9, PMNS,
LCTL,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, P4, P5, P6, PPLS,
LSFT,END, NO, PGDN,NO, VOLD,VOLU,MUTE,END, PGDN,DOWN, FN3, P1, P2, P3, PENT,
LCTL,LALT, SPC, LGUI,BSLS,LEFT,RGHT,DOWN, P0, PDOT
),
// vi mousekeys
KEYMAP(
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
CAPS,NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,NO, NO, NO, P7, P8, P9, PMNS,
NO, VOLD,VOLU,MUTE,NO, NO, MS_L,MS_D,MS_U,MS_R,FN1, NO, ENT, P4, P5, P6, PPLS,
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,NO, NO, NO, UP, P1, P2, P3, PENT,
LCTL,LALT, BTN1, LGUI,BSLS,LEFT,RGHT,DOWN, P0, PDOT
),
// vi cusorkeys
KEYMAP(
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
CAPS,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, NO, NO, NO, P7, P8, P9, PMNS,
NO, NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, P4, P5, P6, PPLS,
LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, UP, P1, P2, P3, PENT,
LCTL,LALT, SPC, LGUI,BSLS,LEFT,RGHT,DOWN, P0, PDOT
),
#endif
}; };

View File

@ -1,5 +1,5 @@
/* /*
Copyright 2011 Jun Wako <wakojun@gmail.com> Copyright 2011,2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by it under the terms of the GNU General Public License as published by
@ -32,7 +32,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define CAPS 0x39 #define CAPS 0x39
#define CAPS_UP (CAPS | 0x80) #define CAPS_BREAK (CAPS | 0x80)
#define ROW(key) ((key)>>3&0x0F) #define ROW(key) ((key)>>3&0x0F)
#define COL(key) ((key)&0x07) #define COL(key) ((key)&0x07)
@ -43,9 +43,6 @@ static bool is_modified = false;
static uint8_t *matrix; static uint8_t *matrix;
static uint8_t _matrix0[MATRIX_ROWS]; static uint8_t _matrix0[MATRIX_ROWS];
#ifdef MATRIX_HAS_GHOST
static bool matrix_has_ghost_in_row(uint8_t row);
#endif
static void register_key(uint8_t key); static void register_key(uint8_t key);
@ -88,11 +85,13 @@ uint8_t matrix_scan(void)
// Send Caps key up event // Send Caps key up event
if (matrix_is_on(ROW(CAPS), COL(CAPS))) { if (matrix_is_on(ROW(CAPS), COL(CAPS))) {
is_modified = true; is_modified = true;
register_key(CAPS_UP); register_key(CAPS_BREAK);
} }
#endif #endif
if (key == M0110_NULL) { if (key == M0110_NULL) {
return 0; return 0;
} else if (key == M0110_ERROR) {
return 0;
} else { } else {
#ifdef MATRIX_HAS_LOCKING_CAPS #ifdef MATRIX_HAS_LOCKING_CAPS
if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) { if (host_keyboard_leds() & (1<<USB_LED_CAPS_LOCK)) {
@ -100,11 +99,11 @@ uint8_t matrix_scan(void)
// Ignore LockingCaps key down event // Ignore LockingCaps key down event
if (key == CAPS) return 0; if (key == CAPS) return 0;
// Convert LockingCaps key up event into down event // Convert LockingCaps key up event into down event
if (key == CAPS_UP) key = CAPS; if (key == CAPS_BREAK) key = CAPS;
} else { } else {
// CAPS LOCK off: // CAPS LOCK off:
// Ignore LockingCaps key up event // Ignore LockingCaps key up event
if (key == CAPS_UP) return 0; if (key == CAPS_BREAK) return 0;
} }
#endif #endif
is_modified = true; is_modified = true;
@ -112,7 +111,7 @@ uint8_t matrix_scan(void)
} }
if (debug_enable) { if (debug_enable) {
print("key: "); phex(key); print("\n"); print("["); phex(key); print("]\n");
} }
return 1; return 1;
} }
@ -125,12 +124,6 @@ bool matrix_is_modified(void)
inline inline
bool matrix_has_ghost(void) bool matrix_has_ghost(void)
{ {
#ifdef MATRIX_HAS_GHOST
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
if (matrix_has_ghost_in_row(i))
return true;
}
#endif
return false; return false;
} }
@ -165,23 +158,6 @@ uint8_t matrix_key_count(void)
return count; return count;
} }
#ifdef MATRIX_HAS_GHOST
inline
static bool matrix_has_ghost_in_row(uint8_t row)
{
// no ghost exists in case less than 2 keys on
if (((matrix[row] - 1) & matrix[row]) == 0)
return false;
// ghost exists in case same state as other row
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
if (i != row && (matrix[i] & matrix[row]) == matrix[row])
return true;
}
return false;
}
#endif
inline inline
static void register_key(uint8_t key) static void register_key(uint8_t key)
{ {

View File

@ -230,6 +230,8 @@ LDFLAGS += $(EXTMEMOPTS)
LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS)) LDFLAGS += $(patsubst %,-L%,$(EXTRALIBDIRS))
LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB) LDFLAGS += $(PRINTF_LIB) $(SCANF_LIB) $(MATH_LIB)
#LDFLAGS += -T linker_script.x #LDFLAGS += -T linker_script.x
# You can give EXTRALDFLAGS at 'make' command line.
LDFLAGS += $(EXTRALDFLAGS)
@ -315,9 +317,10 @@ GENDEPFLAGS = -MMD -MP -MF .dep/$(@F).d
# Combine all necessary flags and optional flags. # Combine all necessary flags and optional flags.
# Add target processor to flags. # Add target processor to flags.
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) # You can give extra flags at 'make' command line like: make EXTRAFLAGS=-DFOO=bar
ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) ALL_CPPFLAGS = -mmcu=$(MCU) -I. -x c++ $(CPPFLAGS) $(GENDEPFLAGS) $(EXTRAFLAGS)
ALL_ASFLAGS = -mmcu=$(MCU) -I. -x assembler-with-cpp $(ASFLAGS) $(EXTRAFLAGS)