Added VIA Configurator support to Snagpad (#4890)

master
Wilba 2019-01-21 06:01:12 +11:00 committed by MechMerlin
parent 8df044b868
commit 6393135afa
3 changed files with 176 additions and 2 deletions

View File

@ -3,8 +3,8 @@
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define VENDOR_ID 0x4443 // "DC" = Don Chiou
#define PRODUCT_ID 0x5350 // "SP" = Snagpad
#define DEVICE_VER 0x0001
#define MANUFACTURER Flehrad
#define PRODUCT Snagpad
@ -54,3 +54,25 @@
#define RGBLIGHT_VAL_STEP 8
#endif
// Does not use WT_MONO_BACKLIGHT
// #define WT_MONO_BACKLIGHT
#define DYNAMIC_KEYMAP_LAYER_COUNT 4
// EEPROM usage
// TODO: refactor with new user EEPROM code (coming soon)
#define EEPROM_MAGIC 0x451F
#define EEPROM_MAGIC_ADDR 32
// Bump this every time we change what we store
// This will automatically reset the EEPROM with defaults
// and avoid loading invalid data from the EEPROM
#define EEPROM_VERSION 0x08
#define EEPROM_VERSION_ADDR 34
// Dynamic keymap starts after EEPROM version
#define DYNAMIC_KEYMAP_EEPROM_ADDR 35
// Dynamic macro starts after dynamic keymaps (35+(4*5*4*2)) = (35+160)
#define DYNAMIC_KEYMAP_MACRO_EEPROM_ADDR 195
#define DYNAMIC_KEYMAP_MACRO_EEPROM_SIZE 829
#define DYNAMIC_KEYMAP_MACRO_COUNT 16

View File

@ -0,0 +1,76 @@
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
LAYOUT_ortho_5x4(
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
KC_P7, KC_P8, KC_P9, KC_PPLS,
KC_P4, KC_P5, KC_P6, KC_PPLS,
KC_P1, KC_P2, KC_P3, KC_PENT,
KC_P0, KC_P0, KC_PDOT, KC_PENT),
LAYOUT_ortho_5x4(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
LAYOUT_ortho_5x4(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS),
LAYOUT_ortho_5x4(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
};
void matrix_init_user(void) {
}
void matrix_scan_user(void) {
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
void led_set_user(uint8_t usb_led) {
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
} else {
}
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
} else {
}
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
} else {
}
if (usb_led & (1 << USB_LED_COMPOSE)) {
} else {
}
if (usb_led & (1 << USB_LED_KANA)) {
} else {
}
}

View File

@ -0,0 +1,76 @@
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# atmega32a bootloadHID
BOOTLOADER = caterina
# Boot Section Size in *bytes*
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
# This is the VIA magic
RAW_ENABLE = yes
DYNAMIC_KEYMAP_ENABLE = yes
SRC += keyboards/wilba_tech/wt_main.c
LAYOUTS = ortho_5x4 numpad_5x4