[Keyboard] Add keyboard hifumi (#5341)

* Add keyboard hifumi

* Update keyboards/hifumi/Readme.md

Co-Authored-By: zk-phi <zk-phi@users.noreply.github.com>

* Update keyboards/hifumi/Readme.md

Co-Authored-By: zk-phi <zk-phi@users.noreply.github.com>

* Update keyboards/hifumi/Readme.md

Co-Authored-By: zk-phi <zk-phi@users.noreply.github.com>

* Update keyboards/hifumi/keymaps/default/keymap.c

Co-Authored-By: zk-phi <zk-phi@users.noreply.github.com>

* Update keyboards/hifumi/keymaps/test/keymap.c

Co-Authored-By: zk-phi <zk-phi@users.noreply.github.com>

* Update keyboards/hifumi/Readme.md

Co-Authored-By: zk-phi <zk-phi@users.noreply.github.com>

* Add DIODE_DIRECTION

* Rename readme.md
master
zk-phi 2019-03-11 13:49:08 +09:00 committed by Drashna Jaelre
parent 0f67232035
commit 5e093ad224
7 changed files with 253 additions and 0 deletions

View File

@ -0,0 +1,56 @@
/*
Copyright 2019 zk-phi
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x3060
#define DEVICE_VER 0x0001
#define MANUFACTURER riconken
#define PRODUCT hifumi
#define DESCRIPTION A macropad with 6 keys
/* key matrix size */
#define MATRIX_ROWS 2
#define MATRIX_COLS 3
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { D4, C6 }
#define MATRIX_COL_PINS { F4, F5, F6 }
#define UNUSED_PINS
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
#define RGBLED_NUM 6
#define RGBLIGHT_LIMIT_VAL 255
#define RGBLIGHT_HUE_STEP 5
#define RGBLIGHT_ANIMATIONS

View File

@ -0,0 +1,31 @@
/* Copyright 2019 zk-phi
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
// This a shortcut to help you visually see your layout.
// The following is an example using the Planck MIT layout
// The first section contains all of the arguments
// The second converts the arguments into a two-dimensional array
#define LAYOUT( \
k00, k01, k02, \
k10, k11, k12 \
) \
{ \
{ k00, k01, k02 }, \
{ k10, k11, k12 } \
}

View File

@ -0,0 +1,12 @@
{
"keyboard_name": "hifumi",
"url": "https://github.com/zk-phi/1x2x3-keyboard",
"maintainer": "riconken",
"width": 3,
"height": 2,
"layouts": {
"LAYOUT": {
"layout": [{"label":"F5", "x":0, "y":0}, {"label":"Up", "x":1, "y":0}, {"label":"PrSc", "x":2, "y":0}, {"label":"Left", "x":0, "y":1}, {"label":"Down", "x":1, "y":1}, {"label":"Right", "x":2, "y":1}]
}
}
}

View File

@ -0,0 +1,47 @@
/* Copyright 2019 zk-phi
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
enum layers {
DEFAULT,
RAISE,
LOWER,
ADJUST
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[DEFAULT] = LAYOUT(
LT(RAISE, KC_F5), KC_UP, LT(LOWER, KC_PSCR),
KC_LEFT, KC_DOWN, KC_RIGHT
),
[RAISE] = LAYOUT(
_______, KC_PGUP, MO(ADJUST),
KC_HOME, KC_PGDN, KC_END
),
[LOWER] = LAYOUT(
MO(ADJUST), _______, _______,
_______, _______, _______
),
[ADJUST] = LAYOUT(
_______, RGB_TOG, _______,
RGB_MODE_SNAKE, RGB_MODE_PLAIN, RGB_HUI
)
};

View File

@ -0,0 +1,32 @@
/* Copyright 2019 zk-phi
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
enum layers {
DEFAULT
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[DEFAULT] = LAYOUT(
KC_1, KC_2, KC_3,
KC_A, KC_B, KC_C
)
};

View File

@ -0,0 +1,13 @@
# hifumi
A macro pad with 6 keys.
Keyboard Maintainer: riconken, [zk-phi](https://github.com/zk-phi)
Hardware Supported: hifumi PCB, Pro Micro
Hardware Availability: [PCB & Case Data](https://github.com/zk-phi/1x2x3-keyboard)
Make example for this keyboard (after setting up your build environment):
make hifumi:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -0,0 +1,62 @@
# MCU name
#MCU = at90usb1286
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = caterina
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
SWAP_HANDS_ENABLE = no # Enable one-hand typing