Keyboard: Adding Z-150 PCB firmware (#3793)

* Adding the AT101 PCB firmware

* Fixed AT101 keymap error

* Fixing AT101 firmware

* More Fixes for AT101 firmware

* Rename AT101_Blackheart.c to at101_blackheart.c

* Rename AT101_Blackheart.h to at101_blackheart.h

* Update readme.md

* Renaming AT101 folder pt1

* Renaming AT101 folder pt2

* Fixing AT101 LED function name

* Redoing AT101 folder naming pt2

Last round had issues, should be the last rename.

* Fixing missing comma in at101_blackheart.h

* Adding Z-150 PCB

* Adding Z-150 readme file

* Fixing Z-150 firmware errors

* Fixing Z-150 layout error

* Fixing Z-150 firmware errors

* Fixing Z-150 Issues

Still unsure where the extra "\" is that through the error.

* Fixing more Z-150 errors

* Finally fixing the Z-150 error

* Fixed Z-150 layout naming

* Removed Z-150 layout fillers
master
blindassassin111 2018-08-31 10:15:09 -05:00 committed by Drashna Jaelre
parent f9eedd7ce7
commit 4e45119796
6 changed files with 228 additions and 0 deletions

View File

@ -0,0 +1,52 @@
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER blindassassin111
#define PRODUCT Z-150 PCB
#define DESCRIPTION Replacement for Zenith Z-150 PCB
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 20
/* key matrix pins */
#define MATRIX_ROW_PINS { C3, C2, C1, C0, E1 }
#define MATRIX_COL_PINS { D0, D1, D2, D3, D4, D5, D7, E0, C7, C6, C5, C4, F0, F1, F2, F3, F4, F5, F6, F7 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Set 0 if debouncing isn't needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* force n-key rollover*/
#define FORCE_NKRO
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* prevent stuck modifiers */
#define PREVENT_STUCK_MODIFIERS
#ifdef RGB_DI_PIN
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 0
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif

View File

@ -0,0 +1,69 @@
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
LAYOUT(
KC_F1, KC_F2, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NLCK, KC_SLCK, MO(1),
KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_ENT, KC_P7, KC_P8, KC_P9, KC_PAST,
KC_F5, KC_F6, KC_LCTRL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_P4, KC_P5, KC_P6, KC_PMNS,
KC_F7, KC_F8, KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT,KC_SLSH, KC_RSFT, KC_BSLS, KC_P1, KC_P2, KC_P3, KC_PPLS,
KC_F9, KC_F10, KC_LALT, KC_GRV, KC_SPC, KC_CAPS, KC_P0, KC_PDOT
),
LAYOUT(
_______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______
),
LAYOUT_z150_tkl(
KC_F1, KC_F2, KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP,
KC_F3, KC_F4, KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN,
KC_F5, KC_F6, KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, XXXXXXX, XXXXXXX, XXXXXXX,
KC_F7, KC_F8, KC_LSFT, KC_BSLS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, MO(1), XXXXXXX, KC_UP, XXXXXXX,
KC_F9, KC_F10, KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_RGUI, KC_MENU, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
),
LAYOUT_z150_tkl(
_______, _______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
),
};
void matrix_init_user(void) {
}
void matrix_scan_user(void) {
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
void led_set_user(uint8_t usb_led) {
DDRB |= (1 << 0);
DDRE |= (1 << 6) | (1 << 7);
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
PORTE |= (1 << 7);
} else {
PORTE &= ~(1 << 7);
}
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
PORTB |= (1 << 0);
} else {
PORTB &= ~(1 << 0);
}
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
PORTE |= (1 << 6);
} else {
PORTE &= ~(1 << 6);
}
}

View File

@ -0,0 +1,14 @@
Z-150 Blackheart PCB
===
A replacement PCB for Zenith Z-150 keyboards.
Keyboard Maintainer: QMK Community and blindassassin111
Hardware Supported: Z-150 blackheart PCB
Hardware Availability: https://deskthority.net/group-buys-f50/programmable-vintage-board-pcbs-omnikey-at101-and-z-150-t19325.html
Make example for this keyboard (after setting up your build environment):
make z150_blackheart:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -0,0 +1,58 @@
# MCU name
MCU = at90usb1286
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Bootloader selection
BOOTLOADER = halfkay
# Boot Section Size in *bytes*
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
AUDIO_ENABLE = no
RGBLIGHT_ENABLE = no

View File

@ -0,0 +1 @@
#include "z150_blackheart.h"

View File

@ -0,0 +1,34 @@
#ifndef z150_blackheart_H
#define z150_blackheart_H
#include "quantum.h"
#define LAYOUT( \
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, K019, \
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119, \
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K215, K216, K217, K218, \
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318, \
K400, K401, K402, K403, K407, K414, K415, K417 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K016, K017, KC_NO, K019 }, \
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K116, K117, K118, K119 }, \
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, KC_NO, K215, K216, K217, K218, KC_NO }, \
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K315, K316, K317, K318, KC_NO }, \
{ K400, K401, K402, K403, KC_NO, KC_NO, KC_NO, K407, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K414, K415, KC_NO, K417, KC_NO, KC_NO } \
}
#define LAYOUT_z150_tkl( \
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, K017, K018, K019, \
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, K117, K118, K119, \
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, K216, K217, K218, \
K300, K301, K302, K405, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, K316, K317, K318, \
K400, K401, K402, K403, K404, K407, K412, K413, K414, K415, K416, K417, K418 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K015, KC_NO, K017, K018, K019 }, \
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K113, K114, K115, KC_NO, K117, K118, K119 }, \
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, KC_NO, K216, K217, K218, KC_NO }, \
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, K314, KC_NO, K316, K317, K318, KC_NO }, \
{ K400, K401, K402, K403, K404, K405, KC_NO, K407, KC_NO, KC_NO, KC_NO, KC_NO, K412, K413, K414, K415, K416, K417, K418, KC_NO } \
}
#endif