[Keyboard] add geekboards 8key macro-pad tester (#5940)

* add geekboards 8key macro-pad tester

* Update readme.md

* Update keyboards/geekboards/tester/rules.mk

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keyboards/geekboards/tester/keymaps/default/keymap.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keyboards/geekboards/tester/keymaps/default/keymap.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keyboards/geekboards/tester/keymaps/default/keymap.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keyboards/geekboards/tester/keymaps/default/keymap.c

Co-Authored-By: fauxpark <fauxpark@gmail.com>

* Update keymap.c

* Update keyboards/geekboards/tester/readme.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/geekboards/tester/readme.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/geekboards/tester/readme.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/geekboards/tester/readme.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update keyboards/geekboards/tester/readme.md

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>

* Update readme.md

* Update tester.c

* Update keyboards/geekboards/tester/config.h

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update keyboards/geekboards/tester/rules.mk

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update keyboards/geekboards/tester/keymaps/default/keymap.c

Co-Authored-By: Drashna Jaelre <drashna@live.com>

* Update keyboards/geekboards/tester/keymaps/default/keymap.c

Co-Authored-By: Drashna Jaelre <drashna@live.com>
master
moyi4681 2019-05-29 02:20:39 +08:00 committed by Drashna Jaelre
parent ff6a57c3c3
commit 4d46489a2a
6 changed files with 208 additions and 0 deletions

View File

@ -0,0 +1,39 @@
#pragma once
#include "config_common.h"
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x1319
#define DEVICE_VER 0x0001
#define MANUFACTURER Geekboards
#define PRODUCT Geekboards Tester
#define DESCRIPTION Geekboards 8-keys macropad
#define MATRIX_ROWS 2
#define MATRIX_COLS 4
#define MATRIX_ROW_PINS { B0, D4}
#define MATRIX_COL_PINS { F7, F6, D2, D3}
#define UNUSED_PINS
#define DIODE_DIRECTION COL2ROW
#define LOCKING_SUPPORT_ENABL
#define LOCKING_RESYNC_ENABLE
#define DEBOUNCE 3
#define RGB_DISABLE_AFTER_TIMEOUT 0
#define RGB_DISABLE_WHEN_USB_SUSPENDED true
#define RGB_MATRIX_KEYPRESSES
#define DISABLE_RGB_MATRIX_SPLASH
#define DISABLE_RGB_MATRIX_MULTISPLASH
#define DISABLE_RGB_MATRIX_SOLID_SPLASH
#define DISABLE_RGB_MATRIX_SOLID_MULTISPLASH
#define DRIVER_ADDR_1 0b1110100
#define DRIVER_ADDR_2 0b1110101
#define DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 8
#define DRIVER_2_LED_TOTAL 0
#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)

View File

@ -0,0 +1,23 @@
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT( /* Base */
RGB_MOD, KC_1, KC_2, KC_3,
KC_4, KC_5, KC_6, MO(1)
),
[1] = LAYOUT( /* Base */
KC_ESC, KC_F1, KC_F2, KC_F3,
KC_F4, KC_F5, KC_F6, KC_F7
),
};
void matrix_init_user(void) {
//user initialization
}
void matrix_scan_user(void) {
//user matrix
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}

View File

@ -0,0 +1,12 @@
Geekboards 8-keys macropad
=====
Keyboard Maintainer: [dztech](https://github.com/moyi4681)
Hardware Supported: Geekboards 8-keys macropad
Hardware Availability: geekboards.ru(https://geekboards.ru/)
Make example for this keyboard (after setting up your build environment):
make geekboards/tester:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -0,0 +1,68 @@
# MCU name
MCU = atmega32u4
# project specific files
#SRC =
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section
BOOTLOADER = qmk-dfu
# Do not put the microcontroller into power saving mode
# when we get USB suspend event. We want it to keep updating
# backlight effects.
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
RGB_MATRIX_ENABLE = yes # Use RGB matrix

View File

@ -0,0 +1,56 @@
#include "tester.h"
const is31_led g_is31_leds[DRIVER_LED_TOTAL] = {
/* Refer to IS31 manual for these locations
* driver
* | R location
* | | G location
* | | | B location
* | | | | */
{0, C1_1, C3_2, C4_2}, //A1
{0, C1_2, C2_2, C4_3}, //A2
{0, C1_3, C2_3, C3_3}, //A3
{0, C1_4, C2_4, C3_4}, //A4
{0, C1_5, C2_5, C3_5}, //A5
{0, C1_6, C2_6, C3_6}, //A6
{0, C1_7, C2_7, C3_7}, //A7
{0, C1_8, C2_8, C3_8}, //A8
};
led_config_t g_led_config = {
{
{ 0, 1, 2, 3},
{ 4, 5, 6, 7}
},
{
{ 0, 0 }, { 75, 0 }, { 151, 0 }, { 224, 0 }, { 0, 64 }, { 75, 64 }, { 151, 64 }, { 224, 64 }
},
{
4, 4, 4, 4, 4, 4, 4, 4
}
};
void matrix_init_kb(void) {
matrix_init_user();
}
void matrix_scan_kb(void) {
matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
return process_record_user(keycode, record);
}
void suspend_power_down_kb(void)
{
rgb_matrix_set_suspend_state(true);
suspend_power_down_user();
}
void suspend_wakeup_init_kb(void)
{
rgb_matrix_set_suspend_state(false);
suspend_wakeup_init_user();
}

View File

@ -0,0 +1,10 @@
#pragma once
#include "quantum.h"
#define LAYOUT( \
k00, k01, k02, k03,\
k10, k11, k12, k13\
) \
{ \
{ k00, k01, k02, k03 }, \
{ k10, k11, k12, k13 } \
}