[Keyboard] Added 3d printable, handwired numpad by tritiumfusion (#6125)

* Added tritium_numpad Adding tritium numpad handwired 6x4 numpad design from thingiverse user tritiumfusion. * Updated readme with more tritiumfusion information * Changed spacing in readme * Changed blu keymap * Update keyboards/handwired/tritium_numpad/config.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/handwired/tritium_numpad/config.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/handwired/tritium_numpad/config.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/handwired/tritium_numpad/keymaps/max/keymap.c Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/handwired/tritium_numpad/tritium_numpad.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/handwired/tritium_numpad/tritium_numpad.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/handwired/tritium_numpad/tritium_numpad.h Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/handwired/tritium_numpad/keymaps/ortho_left/keymap.c Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/handwired/tritium_numpad/keymaps/ortho_right/keymap.c Co-Authored-By: Drashna Jaelre <drashna@live.com> * Update keyboards/handwired/tritium_numpad/rules.mk Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/handwired/tritium_numpad/rules.mk Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/handwired/tritium_numpad/readme.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * Removed action_function(), function_id, and MODS_CTRL_MASK * Reformatted keymaps so that they look nicer. Removed hackey backslashes that were there for no reason whatsoever. * Update keyboards/handwired/tritium_numpad/readme.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * Removed more backslashes * Added bootmagic to tritium_numpad
2019-06-24 23:11:51 -07:00 · 2019-06-24 23:11:51 -07:00 · 48b5903677
parent 1a2a54c326
commit 48b5903677
13 changed files with 609 additions and 0 deletions
--- a/keyboards/handwired/tritium_numpad/config.h
+++ b/keyboards/handwired/tritium_numpad/config.h
@ -0,0 +1,83 @@
+/*
+Copyright 2012 Jun Wako <wakojun@gmail.com>
+
+This program is free software: you can redistribute it and/or modify
+it under the terms of the GNU General Public License as published by
+the Free Software Foundation, either version 2 of the License, or
+(at your option) any later version.
+
+This program is distributed in the hope that it will be useful,
+but WITHOUT ANY WARRANTY; without even the implied warranty of
+MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+GNU General Public License for more details.
+
+You should have received a copy of the GNU General Public License
+along with this program.  If not, see <http://www.gnu.org/licenses/>.
+*/
+
+#pragma once
+
+#include "config_common.h"
+
+/* USB Device descriptor parameter */
+#define VENDOR_ID       0xFEED
+#define PRODUCT_ID      0x6060
+#define DEVICE_VER      0x0003
+#define MANUFACTURER    Handwired
+#define PRODUCT         Tritium Numpad
+#define DESCRIPTION     QMK keyboard firmware for handwired numpad
+
+/* key matrix size */
+#define MATRIX_ROWS 6
+#define MATRIX_COLS 4
+
+// ROWS: Top to bottom, COLS: Left to right
+
+#define MATRIX_ROW_PINS { D1, D0, D4, C6, D7, E6 }
+#define MATRIX_COL_PINS { F4, F6, B1, B2 }
+#define UNUSED_PINS
+
+#define BACKLIGHT_PIN B6
+
+/* COL2ROW or ROW2COL */
+#define DIODE_DIRECTION COL2ROW
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+/* Set 0 if debouncing isn't needed */
+#define DEBOUNCE 5
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Backlight configuration
+ */
+#define BACKLIGHT_LEVELS 4
+
+/* Underlight configuration
+ */
+
+#define RGB_DI_PIN D2
+#define RGBLED_NUM 4     // Number of LEDs
+
+/*
+ * Feature disable options
+ *  These options are also useful to firmware size reduction.
+ */
+
+/* disable debug print */
+//#define NO_DEBUG
+
+/* disable print */
+//#define NO_PRINT
+
+/* disable action features */
+//#define NO_ACTION_LAYER
+//#define NO_ACTION_TAPPING
+//#define NO_ACTION_ONESHOT
+//#define NO_ACTION_MACRO
+//#define NO_ACTION_FUNCTION
+
--- a/keyboards/handwired/tritium_numpad/info.json
+++ b/keyboards/handwired/tritium_numpad/info.json
@ -0,0 +1,21 @@
+{
+  "keyboard_name": "Tritium_numpad",
+  "url": "https://www.thingiverse.com/thing:2855938",
+  "maintainer": "qmk",
+  "width": 4,
+  "height": 6,
+  "layouts": {
+    "LAYOUT_numpad_6x4": {
+      "key_count": 21,
+      "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k13", "x":3, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}, {"label":"k30", "x":0, "y":3}, {"label":"k31", "x":1, "y":3}, {"label":"k32", "x":2, "y":3}, {"label":"k23", "x":3, "y":2, "h":2}, {"label":"k40", "x":0, "y":4}, {"label":"k41", "x":1, "y":4}, {"label":"k42", "x":2, "y":4}, {"label":"k50", "x":0, "y":5, "w":2}, {"label":"k52", "x":2, "y":5}, {"label":"k43", "x":3, "y":4, "h":2}]
+    },
+	"LAYOUT_nontra_6x4": {
+	  "key_count": 22,
+      "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k13", "x":3, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}, {"label":"k23", "x":3, "y":2, "h":2}, {"label":"k30", "x":0, "y":3}, {"label":"k31", "x":1, "y":3}, {"label":"k32", "x":2, "y":3}, {"label":"k40", "x":0, "y":4}, {"label":"k41", "x":1, "y":4}, {"label":"k42", "x":2, "y":4}, {"label":"k43", "x":3, "y":4, "h":2}, {"label":"k50", "x":0, "y":5}, {"label":"k51", "x":1, "y":5}, {"label":"k52", "x":2, "y":5}]
+    },
+    "LAYOUT_ortho_6x4": {
+      "key_count": 24,
+      "layout": [{"label":"k00", "x":0, "y":0}, {"label":"k01", "x":1, "y":0}, {"label":"k02", "x":2, "y":0}, {"label":"k03", "x":3, "y":0}, {"label":"k10", "x":0, "y":1}, {"label":"k11", "x":1, "y":1}, {"label":"k12", "x":2, "y":1}, {"label":"k13", "x":3, "y":1}, {"label":"k20", "x":0, "y":2}, {"label":"k21", "x":1, "y":2}, {"label":"k22", "x":2, "y":2}, {"label":"k23", "x":3, "y":2}, {"label":"k30", "x":0, "y":3}, {"label":"k31", "x":1, "y":3}, {"label":"k32", "x":2, "y":3}, {"label":"k33", "x":3, "y":3}, {"label":"k40", "x":0, "y":4}, {"label":"k41", "x":1, "y":4}, {"label":"k42", "x":2, "y":4}, {"label":"k43", "x":3, "y":4}, {"label":"k50", "x":0, "y":5}, {"label":"k51", "x":1, "y":5}, {"label":"k52", "x":2, "y":5}, {"label":"k53", "x":3, "y":5}]
+    }
+  }
+}
--- a/keyboards/handwired/tritium_numpad/keymaps/blu/keymap.c
+++ b/keyboards/handwired/tritium_numpad/keymaps/blu/keymap.c
@ -0,0 +1,40 @@
+#include QMK_KEYBOARD_H
+
+void keyboard_pre_init_user(void)
+{
+	// Set layer LED as an output
+    setPinOutput(B0);
+}
+
+uint32_t layer_state_set_user(uint32_t state)
+{
+	// Switch layer LED accordingly
+    switch (biton32(state)) {
+    case 0:
+        writePinHigh(B0);
+        break;
+    case 1:
+        writePinLow(B0);
+        break;
+	}
+    return state;
+}
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+	[0] = LAYOUT_ortho_6x4(
+		KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, 
+		KC_P7,   KC_P8,   KC_P9,   KC_PPLS, 
+		KC_P4,   KC_P5,   KC_P6,   KC_BSPC, 
+		KC_P1,   KC_P2,   KC_P3,   KC_PENT, 
+		KC_P0,   KC_UP,   KC_PDOT, TT(1), 
+		KC_LEFT, KC_DOWN, KC_RGHT, BL_STEP
+	),
+	[1] = LAYOUT_ortho_6x4(
+		KC_NO,   KC_NO,   KC_NO,   KC_NO, 
+		KC_NO,   KC_K,    KC_NO,   KC_NO, 
+		KC_H,    KC_NO,   KC_L,    KC_NO, 
+		KC_NO,   KC_J,    KC_NO,   KC_NO, 
+		KC_LSFT, KC_Z,    KC_X,    KC_TRNS, 
+		KC_NO,   KC_NO,   KC_NO,   KC_NO
+	)
+};
--- a/keyboards/handwired/tritium_numpad/keymaps/blu/layers.json
+++ b/keyboards/handwired/tritium_numpad/keymaps/blu/layers.json
@ -0,0 +1 @@
+[["KC_NLCK", "KC_PSLS", "KC_PAST", "KC_PMNS", "KC_P7", "KC_P8", "KC_P9", "KC_PPLS", "KC_P4", "KC_P5", "KC_P6", "KC_BSPC", "KC_P1", "KC_P2", "KC_P3", "KC_PENT", "KC_P0", "KC_UP", "KC_PDOT", "TT(1)", "KC_LEFT", "KC_DOWN", "KC_RGHT", "BL_STEP"], ["KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_K", "KC_NO", "KC_NO", "KC_H", "KC_NO", "KC_L", "KC_NO", "KC_NO", "KC_J", "KC_NO", "KC_NO", "KC_LSFT", "KC_Z", "KC_X", "KC_TRNS", "KC_NO", "KC_NO", "KC_NO", "KC_NO"]]
--- a/keyboards/handwired/tritium_numpad/keymaps/blu/readme.md
+++ b/keyboards/handwired/tritium_numpad/keymaps/blu/readme.md
@ -0,0 +1,13 @@
+# Generated Keymap Layout
+
+This layout was generated by the QMK API. You can find the JSON data used to
+generate this keymap in the file layers.json.
+
+To make use of this file you will need follow the following steps:
+
+* Download or Clone QMK Firmware: <https://github.com/qmk/qmk_firmware/>
+* Extract QMK Firmware to a location on your hard drive
+* Copy this folder into %s
+* You are now ready to compile or use your keymap with the source
+
+More information can be found in the QMK docs: <https://docs.qmk.fm>
--- a/keyboards/handwired/tritium_numpad/keymaps/default/keymap.c
+++ b/keyboards/handwired/tritium_numpad/keymaps/default/keymap.c
@ -0,0 +1,59 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * ,-------------------.
+   * |Esc |TAB |BS  | =  |
+   * |----|----|----|----|
+   * | NL | /  | *  | -  |
+   * |----|----|----|----|
+   * | 7  | 8  | 9  |    |
+   * |----|----|----| +  |
+   * | 4  | 5  | 6  |    |
+   * |----|----|----|----|
+   * | 1  | 2  | 3  |    |
+   * |----|----|----| En |
+   * |   0     |./FN|    |
+   * `-------------------'
+   */
+
+  [_BL] = LAYOUT_numpad_6x4(
+    KC_ESC,  KC_TAB,  KC_BSPC, KC_PEQL, 
+    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, 
+    KC_P7,   KC_P8,   KC_P9,   
+    KC_P4,   KC_P5,   KC_P6,   KC_PPLS, 
+    KC_P1,   KC_P2,   KC_P3,   
+      KC_P0, LT(_FL,KC_PDOT),  KC_PENT  
+  ),
+
+  /* Keymap _FL: Function Layer
+   * ,-------------------.
+   * |Esc |TAB |BS  | =  |
+   * |----|----|----|----|
+   * | NL | /  | *  | -  |
+   * |----|----|----|----|
+   * | 7  | 8  | 9  |    |
+   * |----|----|----|RST |
+   * | 4  | 5  | 6  |    |
+   * |----|----|----|----|
+   * | 1  | 2  | 3  |    |
+   * |----|----|----| En |
+   * |   0     |./FN|    |
+   * `-------------------'
+   */
+  [_FL] = LAYOUT_numpad_6x4(
+    KC_ESC,  KC_TAB,  KC_BSPC, KC_PEQL, 
+    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, 
+    KC_P7,   KC_P8,   KC_P9,   
+    KC_P4,   KC_P5,   KC_P6,   RESET,   
+    KC_P1,   KC_P2,   KC_P3,   
+      KC_P0, LT(_FL,KC_PDOT),  KC_PENT 
+  ),
+};
--- a/keyboards/handwired/tritium_numpad/keymaps/max/keymap.c
+++ b/keyboards/handwired/tritium_numpad/keymaps/max/keymap.c
@ -0,0 +1,59 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * ,-------------------.
+   * |Esc |Setp| -  | =  |
+   * |----|----|----|----|
+   * | F1 | F2 | F3 | F4 |
+   * |----|----|----|----|
+   * | 7  | 8  | 9  |  - |
+   * |----|----|----|----|
+   * | 4  | 5  | 6  | LF |
+   * |----|----|----|----|
+   * | 1  | 2  | 3  | \  |
+   * |----|----|----|----|
+   * |Left|Down| Up |Rght|
+   * `-------------------'
+   */
+
+  [_BL] = LAYOUT_ortho_6x4(
+    KC_ESC,  KC_TAB,  KC_MINS,KC_EQL,  
+    KC_F1,   KC_F2,   KC_F3,  KC_F4,   
+    KC_P7,   KC_P8,   KC_P9,  KC_PMNS,
+    KC_P4,   KC_P5,   KC_P6,  KC_PENT, 
+    KC_P1,   KC_P2,   KC_P3,  KC_BSLS, 
+    KC_LEFT, KC_DOWN, KC_UP,  KC_RIGHT
+  ),
+
+  /* Keymap _FL: Function Layer
+   * ,-------------------.
+   * |Esc |TAB |BS  | =  |
+   * |----|----|----|----|
+   * | NL | /  | *  | -  |
+   * |----|----|----|----|
+   * | 7  | 8  | 9  |    |
+   * |----|----|----|RST |
+   * | 4  | 5  | 6  |    |
+   * |----|----|----|----|
+   * | 1  | 2  | 3  |    |
+   * |----|----|----| En |
+   * |   0     |./FN|    |
+   * `-------------------'
+   */
+  [_FL] = LAYOUT_ortho_6x4(
+    KC_ESC,  KC_TAB,  KC_BSPC, KC_PEQL, 
+    KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, 
+    KC_P7,   KC_P8,   KC_P9,   RESET,   
+    KC_P4,   KC_P5,   KC_P6,   KC_PENT, 
+    KC_P1,   KC_P2,   KC_P3,   KC_PENT, 
+    KC_LEFT, KC_DOWN, KC_UP,   KC_RIGHT
+  ),
+};
--- a/keyboards/handwired/tritium_numpad/keymaps/ortho_left/keymap.c
+++ b/keyboards/handwired/tritium_numpad/keymaps/ortho_left/keymap.c
@ -0,0 +1,59 @@
+#include QMK_KEYBOARD_H
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * ,-------------------.
+   * | T  | G  | B  |Spac|
+   * |----|----|----|----|
+   * | R  | F  | V  | Fn |
+   * |----|----|----|----|
+   * | E  | D  | C  | OS |
+   * |----|----|----|----|
+   * | W  | S  | X  | Alt|
+   * |----|----|----|----|
+   * | Q  | A  | Z  | Ctl|
+   * |----|----|----|----|
+   * | Esc| Tab|Shft| Fn2|
+   * `-------------------'
+   */
+
+  [_BL] = LAYOUT_ortho_6x4(
+    KC_T,   KC_G,   KC_B,      KC_SPACE,
+    KC_R,   KC_F,   KC_V,      MO(1),    
+    KC_E,   KC_D,   KC_C,      KC_LGUI, 
+    KC_W,   KC_S,   KC_X,      KC_LALT,
+    KC_Q,   KC_A,   KC_Z,      KC_LCTL, 
+    KC_TAB, KC_ESC, KC_LSHIFT, MO(1)
+  ),
+
+  /* Keymap _FL: Function Layer
+   * ,-------------------.
+   * | 5  | F5 | F11|Spac|
+   * |----|----|----|----|
+   * | 4  | F4 | F10|    |
+   * |----|----|----|----|
+   * | 3  | F3 | F9 | OS |
+   * |----|----|----|----|
+   * | 2  | F2 | F8 | Alt|
+   * |----|----|----|----|
+   * | 1  | F1 | F7 | Ctl|
+   * |----|----|----|----|
+   * | `  | Del|Shft|    |
+   * `-------------------'
+   */
+  [_FL] = LAYOUT_ortho_6x4(
+    KC_5,  KC_F5,  KC_F11,  _______, 
+    KC_4,  KC_F4,  KC_F10,  _______, 
+    KC_3,  KC_F3,  KC_F9,   _______, 
+    KC_2,  KC_F2,  KC_F8,   _______, 
+    KC_1,  KC_F1,  KC_F7,   _______, 
+    KC_GRV,KC_DEL, _______, _______
+  ),
+};
--- a/keyboards/handwired/tritium_numpad/keymaps/ortho_right/keymap.c
+++ b/keyboards/handwired/tritium_numpad/keymaps/ortho_right/keymap.c
@ -0,0 +1,61 @@
+#include QMK_KEYBOARD_H
+
+#ifdef RGBLIGHT_ENABLE
+#endif
+
+// Each layer gets a name for readability, which is then used in the keymap matrix below.
+// The underscores don't mean anything - you can have a layer called STUFF or any other name.
+// Layer names don't all need to be of the same length, obviously, and you can also skip them
+// entirely and just use numbers.
+#define _BL 0
+#define _FL 1
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+  /* Keymap _BL: (Base Layer) Default Layer
+   * ,-------------------.
+   * |Spac| N  | H  | Y  |
+   * |----|----|----|----|
+   * | Fn | M  | J  | U  |
+   * |----|----|----|----|
+   * |Left| ,  | K  | I  |
+   * |----|----|----|----|
+   * |Down| .  | L  | O  |
+   * |----|----|----|----|
+   * | Up | /  | ;  | P  |
+   * |----|----|----|----|
+   * |Rght| Ret| "  |Bspc|
+   * `-------------------'
+   */
+  [_BL] = LAYOUT_ortho_6x4(
+    KC_SPACE, KC_N,     KC_H,      KC_Y,   
+    MO(1),    KC_M,     KC_J,      KC_U,   
+    KC_LEFT,  KC_COMM,  KC_K,      KC_I,   
+    KC_DOWN,  KC_DOT,   KC_L,      KC_O,   
+    KC_UP,    KC_SLASH, KC_SCLN,   KC_P,   
+    KC_RIGHT, KC_ENT,   KC_QUOT,   KC_BSPC
+  ),
+
+  /* Keymap _FL: Function Layer
+   * ,-------------------.
+   * |Esc | F12| F6 | 6  |
+   * |----|----|----|----|
+   * | NL | M  | -  | 7  |
+   * |----|----|----|----|
+   * |Left| ,  | =  | 8  |
+   * |----|----|----|----|
+   * |Down| .  | [  | 9  |
+   * |----|----|----|----|
+   * | Up | /  | ]  | 0  |
+   * |----|----|----|----|
+   * |Rght| Ret| \  | Del|
+   * `-------------------'
+   */
+  [_FL] = LAYOUT_ortho_6x4(
+    _______, KC_F12,  KC_F6,   KC_6,  
+    _______, _______, KC_MINS, KC_7, 
+    _______, _______, KC_EQL,  KC_8,  
+    _______, _______, KC_LBRC, KC_9,  
+    _______, _______, KC_RBRC, KC_0,  
+    _______, _______, KC_BSLS, KC_DEL
+  ),
+};
--- a/keyboards/handwired/tritium_numpad/readme.md
+++ b/keyboards/handwired/tritium_numpad/readme.md
@ -0,0 +1,28 @@
+Tritium Numpad
+===
+
+Keyboard Maintainer: QMK Community  
+Hardware Supported: Handwired 6x4 numpads using promicro controller  
+Hardware Availability: https://www.thingiverse.com/thing:2855938
+
+Wiring is accomplished on the Pro Micro board using the following pins as rows:
+* D2 : Row 1
+* D3 : Row 2
+* D4 : Row 3
+* D5 : Row 4
+* D6 : Row 5
+* D7 : Row 6
+
+and the following pins as columns:
+* A3 : Col 1
+* A1 : Col 2
+* D15 : Col 3
+* D16 : Col 4
+
+Make example for this keyboard (after setting up your build environment):
+
+    make tritium_numpad:default
+
+Bootmagic is enabled.  Press the key at 0,0 (usually escape or numlock in the top left corner) while plugging the keyboard in to jump to bootloader.
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
--- a/keyboards/handwired/tritium_numpad/rules.mk
+++ b/keyboards/handwired/tritium_numpad/rules.mk
@ -0,0 +1,61 @@
+# MCU name
+MCU = atmega32u4
+
+# Processor frequency.
+#     This will define a symbol, F_CPU, in all source code files equal to the
+#     processor frequency in Hz. You can then use this symbol in your source code to
+#     calculate timings. Do NOT tack on a 'UL' at the end, this will be done
+#     automatically to create a 32-bit value in your source code.
+#
+#     This will be an integer division of F_USB below, as it is sourced by
+#     F_USB after it has run through any CPU prescalers. Note that this value
+#     does not *change* the processor frequency - it should merely be updated to
+#     reflect the processor speed set externally so that the code can use accurate
+#     software delays.
+F_CPU = 16000000
+
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Bootloader
+#     This definition is optional, and if your keyboard supports multiple bootloaders of
+#     different sizes, comment this out, and the correct address will be loaded
+#     automatically (+60). See bootloader.mk for all options.
+BOOTLOADER = caterina
+
+# Interrupt driven control endpoint task(+60)
+OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE = lite	# Key at 0,0 makes the keyboard go into bootloader(+1000)
+MOUSEKEY_ENABLE = no	# Mouse keys(+4700)
+EXTRAKEY_ENABLE = yes	# Audio control and System control(+450)
+CONSOLE_ENABLE = yes	# Console for debug(+400)
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+NKRO_ENABLE = yes		# USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+RGBLIGHT_ENABLE = no   # Enable keyboard underlight functionality (+4870)
+BACKLIGHT_ENABLE = yes  # Enable keyboard backlight functionality (+1150)
+MIDI_ENABLE = no 		# MIDI controls
+AUDIO_ENABLE = no
+UNICODE_ENABLE = no 		# Unicode
+BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
+
+LAYOUTS = numpad_6x4 ortho_6x4 nontra_6x4
--- a/keyboards/handwired/tritium_numpad/tritium_numpad.c
+++ b/keyboards/handwired/tritium_numpad/tritium_numpad.c
@ -0,0 +1,29 @@
+#include "tritium_numpad.h"
+#include "led.h"
+
+void keyboard_pre_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+	keyboard_pre_init_user();
+	led_init_ports();
+};
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+	matrix_scan_user();
+};
+
+void led_init_ports(void) {
+    // * Set our LED pins as output
+    // Numlock LED
+    setPinOutput(D5);
+}
+
+void led_set_kb(uint8_t usb_led) {
+    if (IS_LED_ON(usb_led, USB_LED_NUM_LOCK)) {
+        writePinLow(D5);
+    } else {
+        writePinHigh(D5);
+    }
+}
--- a/keyboards/handwired/tritium_numpad/tritium_numpad.h
+++ b/keyboards/handwired/tritium_numpad/tritium_numpad.h
@ -0,0 +1,95 @@
+#pragma once
+
+#include "quantum.h"
+
+// readability
+#define XXX KC_NO
+
+/*  matrix layout
+   * ,-------------------.
+   * | 00 | 01 | 02 | 03 |
+   * |----|----|----|----|
+   * | 10 | 11 | 12 | 13 |
+   * |----|----|----|----|
+   * | 20 | 21 | 22 |    |
+   * |----|----|----| 23 |
+   * | 30 | 31 | 32 |    |
+   * |----|----|----|----|
+   * | 40 | 41 | 42 |    |
+   * |----|----|----| 43 |
+   * |   50    | 52 |    |
+   * `-------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT_numpad_6x4( \
+  k00, k01, k02, k03, \
+  k10, k11, k12, k13, \
+  k20, k21, k22,      \
+  k30, k31, k32, k23, \
+  k40, k41, k42,      \
+     k50,   k52, k43  \
+) \
+{ \
+  {k00, k01, k02, k03}, \
+  {k10, k11, k12, k13}, \
+  {k20, k21, k22, k23}, \
+  {k30, k31, k32, XXX}, \
+  {k40, k41, k42, k43}, \
+  {k50, XXX, k52, XXX} \
+}
+
+/*  matrix layout
+   * ,-------------------.
+   * | 00 | 01 | 02 | 03 |
+   * |----|----|----|----|
+   * | 10 | 11 | 12 | 13 |
+   * |----|----|----|----|
+   * | 20 | 21 | 22 |    |
+   * |----|----|----| 23 |
+   * | 30 | 31 | 32 |    |
+   * |----|----|----|----|
+   * | 40 | 41 | 42 |    |
+   * |----|----|----| 43 |
+   * | 50 | 51 | 52 |    |
+   * `-------------------'
+ */
+// The first section contains all of the arguments
+// The second converts the arguments into a two-dimensional array
+#define LAYOUT_nontra_6x4( \
+  k00, k01, k02, k03, \
+  k10, k11, k12, k13, \
+  k20, k21, k22,      \
+  k30, k31, k32, k23, \
+  k40, k41, k42,      \
+  k50, k51, k52, k43  \
+) \
+{ \
+  {k00, k01, k02, k03}, \
+  {k10, k11, k12, k13}, \
+  {k20, k21, k22, k23}, \
+  {k30, k31, k32, xxx}, \
+  {k40, k41, k42, k43}, \
+  {k50, k51, k52, xxx} \
+}
+
+#define LAYOUT_ortho_6x4( \
+  k00, k01, k02, k03, \
+  k10, k11, k12, k13, \
+  k20, k21, k22, k23, \
+  k30, k31, k32, k33, \
+  k40, k41, k42, k43, \
+  k50, k51, k52, k53  \
+) \
+{ \
+  {k00, k01, k02, k03}, \
+  {k10, k11, k12, k13}, \
+  {k20, k21, k22, k23}, \
+  {k30, k31, k32, k33}, \
+  {k40, k41, k42, k43}, \
+  {k50, k51, k52, k53} \
+}
+
+void keyboard_pre_init_user(void);
+void matrix_scan_user(void);
+
				`@ -0,0 +1 @@`
				`[["KC_NLCK", "KC_PSLS", "KC_PAST", "KC_PMNS", "KC_P7", "KC_P8", "KC_P9", "KC_PPLS", "KC_P4", "KC_P5", "KC_P6", "KC_BSPC", "KC_P1", "KC_P2", "KC_P3", "KC_PENT", "KC_P0", "KC_UP", "KC_PDOT", "TT(1)", "KC_LEFT", "KC_DOWN", "KC_RGHT", "BL_STEP"], ["KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_NO", "KC_K", "KC_NO", "KC_NO", "KC_H", "KC_NO", "KC_L", "KC_NO", "KC_NO", "KC_J", "KC_NO", "KC_NO", "KC_LSFT", "KC_Z", "KC_X", "KC_TRNS", "KC_NO", "KC_NO", "KC_NO", "KC_NO"]]`