[Keyboard] Pteron36, open source 3x5_3 supporting layout (#13313)

master
Harshit Goel 2021-07-01 13:14:38 +05:30 committed by GitHub
parent 54f429edd8
commit 4168e10c49
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
10 changed files with 426 additions and 0 deletions

View File

@ -0,0 +1,155 @@
/*
Copyright 2021 Harshit Goel
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x4847 //HG
#define PRODUCT_ID 0x5054 //PT
#define DEVICE_VER 0x0001
#define MANUFACTURER Harshit Goel
#define PRODUCT Pteron36
/* key matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 5
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { E6, D7, B4, B5 }
#define MATRIX_COL_PINS { F6, F7, B1, B3, B2 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION ROW2COL
/*
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.
*/
#define USE_SERIAL
#define SOFT_SERIAL_PIN D3 // or D1, D2, D3, E6
//#define LED_NUM_LOCK_PIN B0
//#define LED_CAPS_LOCK_PIN B1
//#define LED_SCROLL_LOCK_PIN B2
//#define LED_COMPOSE_PIN B3
//#define LED_KANA_PIN B4
//#define BACKLIGHT_PIN B7
//#define BACKLIGHT_LEVELS 3
//#define BACKLIGHT_BREATHING
//#define RGB_DI_PIN E2
//#ifdef RGB_DI_PIN
//# define RGBLED_NUM 16
//# define RGBLIGHT_HUE_STEP 8
//# define RGBLIGHT_SAT_STEP 8
//# define RGBLIGHT_VAL_STEP 8
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
//# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
//# define RGBLIGHT_ANIMATIONS
/*== or choose animations ==*/
//# define RGBLIGHT_EFFECT_BREATHING
//# define RGBLIGHT_EFFECT_RAINBOW_MOOD
//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
//# define RGBLIGHT_EFFECT_SNAKE
//# define RGBLIGHT_EFFECT_KNIGHT
//# define RGBLIGHT_EFFECT_CHRISTMAS
//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
//# define RGBLIGHT_EFFECT_RGB_TEST
//# define RGBLIGHT_EFFECT_ALTERNATING
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
//#endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
*/
//#define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
/* Bootmagic Lite key configuration */
//#define BOOTMAGIC_LITE_ROW 0
//#define BOOTMAGIC_LITE_COLUMN 0
// for via
#define DYNAMIC_KEYMAP_LAYER_COUNT 7

View File

@ -0,0 +1,15 @@
{
"keyboard_name": "Pteron36",
"url": "",
"maintainer": "Harshit Goel",
"width": 5,
"height": 8,
"layouts": {
"LAYOUT_split_3x5_3": {
"layout": [{"x":2, "y":0}, {"x":12.5, "y":0}, {"x":1, "y":0.5}, {"x":3, "y":0.5}, {"x":11.5, "y":0.5}, {"x":13.5, "y":0.5}, {"x":4, "y":0.75}, {"x":10.5, "y":0.75}, {"x":0, "y":1}, {"x":2, "y":1}, {"x":12.5, "y":1}, {"x":14.5, "y":1}, {"x":1, "y":1.5}, {"x":3, "y":1.5}, {"x":11.5, "y":1.5}, {"x":13.5, "y":1.5}, {"x":4, "y":1.75}, {"x":10.5, "y":1.75}, {"x":0, "y":2}, {"x":2, "y":2}, {"x":12.5, "y":2}, {"x":14.5, "y":2}, {"x":1, "y":2.5}, {"x":3, "y":2.5}, {"x":11.5, "y":2.5}, {"x":13.5, "y":2.5}, {"x":4, "y":2.75}, {"x":10.5, "y":2.75}, {"x":0, "y":3}, {"x":14.5, "y":3}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":8.5, "y":4}, {"x":9.5, "y":4}, {"x":10.5, "y":4}]
},
"LAYOUT_split_3x5_3_encoder": {
"layout": [{"x":2, "y":0}, {"x":12.5, "y":0}, {"x":1, "y":0.5}, {"x":3, "y":0.5}, {"x":11.5, "y":0.5}, {"x":13.5, "y":0.5}, {"x":4, "y":0.75}, {"x":10.5, "y":0.75}, {"x":0, "y":1}, {"x":2, "y":1}, {"x":12.5, "y":1}, {"x":14.5, "y":1}, {"x":1, "y":1.5}, {"x":3, "y":1.5}, {"x":11.5, "y":1.5}, {"x":13.5, "y":1.5}, {"x":4, "y":1.75}, {"x":10.5, "y":1.75}, {"x":0, "y":2}, {"x":2, "y":2}, {"x":12.5, "y":2}, {"x":14.5, "y":2}, {"x":1, "y":2.5}, {"x":3, "y":2.5}, {"x":11.5, "y":2.5}, {"x":13.5, "y":2.5}, {"x":4, "y":2.75}, {"label":"enc1", "x":5.5, "y":2.75}, {"label":"enc2", "x":9, "y":2.75}, {"x":10.5, "y":2.75}, {"x":0, "y":3}, {"x":14.5, "y":3}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":8.5, "y":4}, {"x":9.5, "y":4}, {"x":10.5, "y":4}]
}
}
}

View File

@ -0,0 +1,35 @@
/* Copyright HarshitGoel96 2020
* With permission from mattdibi, the original maintainer of the Redox hardware.
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum custom_keycodes {
_QWERTY
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_split_3x5_3_encoder(
KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,
KC_Z, KC_X, KC_C, KC_V, KC_B,KC_LBRACKET, KC_RBRACKET, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,
KC_LGUI, KC_BSPC, KC_SPC, KC_SPC, KC_ENT, KC_RALT
)};

View File

@ -0,0 +1,84 @@
/* Copyright HarshitGoel96 2020
* With permission from mattdibi, the original maintainer of the Redox hardware.
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum layer_names {
_QWERTY,
_SYMB,
_NAV,
_ADJUST,
_MOUSE,
_NUMB,
_FNR
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT_split_3x5_3_encoder(
KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,
KC_Z, KC_X, KC_C, KC_V, KC_B,KC_LBRACKET, KC_RBRACKET, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH,
KC_LGUI, KC_BSPC, KC_SPC, KC_SPC, KC_ENT, KC_RALT
),
[_SYMB] = LAYOUT_split_3x5_3_encoder(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
[_NAV] = LAYOUT_split_3x5_3_encoder(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
[_ADJUST] = LAYOUT_split_3x5_3_encoder(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
[_MOUSE] = LAYOUT_split_3x5_3_encoder(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
[_NUMB] = LAYOUT_split_3x5_3_encoder(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
),
[_FNR] = LAYOUT_split_3x5_3_encoder(
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
)
};

View File

@ -0,0 +1 @@
# Default keymap for Redox Wireless

View File

@ -0,0 +1,2 @@
VIA_ENABLE = yes
LTO_ENABLE = yes

View File

@ -0,0 +1,17 @@
/* Copyright 2021 Harshit Goel
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "pteron36.h"

View File

@ -0,0 +1,59 @@
/* Copyright 2021 Harshit Goel
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
/* This is a shortcut to help you visually see your layout.
*
* The first section contains all of the arguments representing the physical
* layout of the board and position of the keys.
*
* The second converts the arguments into a two-dimensional array which
* represents the switch matrix.
*/
#define LAYOUT_split_3x5_3( \
L00, L01, L02,L03, L04 , R04, R03, R02, R01, R00,\
L10, L11, L12,L13, L14 , R14, R13, R12, R11, R10,\
L20, L21, L22,L23, L24 , R24, R23, R22, R21, R20, \
L30, L31, L32, R32, R31, R30\
) {\
{L00, L01, L02,L03, L04 },\
{L10, L11, L12,L13, L14 },\
{L20, L21, L22,L23, L24 },\
{L30, L31, L32, KC_NO, KC_NO },\
{R00, R01, R02,R03, R04 },\
{R10, R11, R12,R13, R14 },\
{R20, R21, R22,R23, R24 },\
{R30, R31, R32,KC_NO, KC_NO }\
}
#define LAYOUT_split_3x5_3_encoder(\
L00, L01, L02,L03, L04 , R04, R03, R02, R01, R00,\
L10, L11, L12,L13, L14 , R14, R13, R12, R11, R10,\
L20, L21, L22,L23, L24 ,L34, R34,R24, R23, R22, R21, R20, \
L30, L31, L32, R32, R31, R30\
){\
{L00, L01, L02,L03, L04 },\
{L10, L11, L12,L13, L14 },\
{L20, L21, L22,L23, L24 },\
{L30, L31, L32, KC_NO, L34 },\
{R00, R01, R02,R03, R04 },\
{R10, R11, R12,R13, R14 },\
{R20, R21, R22,R23, R24 },\
{R30, R31, R32,KC_NO, R34 }\
}

View File

@ -0,0 +1,31 @@
# Pteron36
![Pteron36](https://i.imgur.com/PuXPWYfh.jpg)
A 36 key keyboard with a bit more natural thumb cluster.
* Keyboard Maintainer: [Harshit Goel](https://github.com/harshitgoel96)
* Hardware Supported: Pteron36 using promicro.
* Hardware Availability: Hardware is opensource, you can simply send the gerber to a PCB manufacturere and them made. File are availalbe in [pteron36 repository](https://github.com/harshitgoel96/pteron36-split-keyboard/releases/tag/v1.2.0)
Make example for this keyboard (after setting up your build environment):
make pteron36:default
Flashing example for this keyboard:
make pteron36:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Default Keymap and Miryoku Layout support
The keyboard was designed with miryoku layout in mind. The default layout is very basic and does not have much use. I will be opening a pr to make the keyboard available with miryoku layout soon. Currently to build the keyboard with miryoku you will have to checkout latest miryoku qmk repo, and add the keyboard folder there manually. After copying the folder run the following command
make pteron36:manna-harbour_miryoku
Add miryoku params as required.
## OLED and RotaryEncoder
I am working on adding OLED and RotaryEncoder support in keyboard config.

View File

@ -0,0 +1,27 @@
# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = caterina
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
OLED_DRIVER_ENABLE = no # OLED display; work in progress to add support. will be update in future.
SPLIT_KEYBOARD = yes
LAYOUTS = split_3x5_3