Initial support for The Unloved Bastard

master
Alexander Fougner 2018-03-14 21:55:34 +01:00 committed by Jack Humbert
parent 00b4dce605
commit 3acaad6600
9 changed files with 592 additions and 0 deletions

View File

@ -0,0 +1,168 @@
/*
Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_H
#define CONFIG_H
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x1337
#define DEVICE_VER 0x0001
#define MANUFACTURER BathroomEpiphanies
#define PRODUCT Unloved Bastard
#define DESCRIPTION Unloved Bastard controller for CM Masterkeys S
/* key matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 18
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
*/
// #define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Magic Key Options
*
* Magic keys are hotkey commands that allow control over firmware functions of
* the keyboard. They are best used in combination with the HID Listen program,
* found here: https://www.pjrc.com/teensy/hid_listen.html
*
* The options below allow the magic key functionality to be changed. This is
* useful if your keyboard/keypad is missing keys and you want magic key support.
*
*/
/* key combination for magic key command */
#define IS_COMMAND() ( \
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
)
/* control how magic key switches layers */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
/* override magic key keymap */
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
//#define MAGIC_KEY_HELP1 H
//#define MAGIC_KEY_HELP2 SLASH
//#define MAGIC_KEY_DEBUG D
//#define MAGIC_KEY_DEBUG_MATRIX X
//#define MAGIC_KEY_DEBUG_KBD K
//#define MAGIC_KEY_DEBUG_MOUSE M
//#define MAGIC_KEY_VERSION V
//#define MAGIC_KEY_STATUS S
//#define MAGIC_KEY_CONSOLE C
//#define MAGIC_KEY_LAYER0_ALT1 ESC
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
//#define MAGIC_KEY_LAYER0 0
//#define MAGIC_KEY_LAYER1 1
//#define MAGIC_KEY_LAYER2 2
//#define MAGIC_KEY_LAYER3 3
//#define MAGIC_KEY_LAYER4 4
//#define MAGIC_KEY_LAYER5 5
//#define MAGIC_KEY_LAYER6 6
//#define MAGIC_KEY_LAYER7 7
//#define MAGIC_KEY_LAYER8 8
//#define MAGIC_KEY_LAYER9 9
//#define MAGIC_KEY_BOOTLOADER PAUSE
//#define MAGIC_KEY_LOCK CAPS
//#define MAGIC_KEY_EEPROM E
//#define MAGIC_KEY_NKRO N
//#define MAGIC_KEY_SLEEP_LED Z
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/*
* MIDI options
*/
/* Prevent use of disabled MIDI features in the keymap */
//#define MIDI_ENABLE_STRICT 1
/* enable basic MIDI features:
- MIDI notes can be sent when in Music mode is on
*/
//#define MIDI_BASIC
/* enable advanced MIDI features:
- MIDI notes can be added to the keymap
- Octave shift and transpose
- Virtual sustain, portamento, and modulation wheel
- etc.
*/
//#define MIDI_ADVANCED
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
//#define MIDI_TONE_KEYCODE_OCTAVES 1
#endif

View File

@ -0,0 +1,24 @@
/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "config_common.h"
// place overrides here
#endif

View File

@ -0,0 +1,63 @@
/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "unloved_bastard.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = KEYMAP(\
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS, \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_INS, KC_HOME, KC_PGUP, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, KC_END, KC_PGDN, \
KC_CAPS,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, \
KC_LSFT,KC_NUBS,KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_UP, \
KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT )
};
const uint16_t PROGMEM fn_actions[] = {
};
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
{
// MACRODOWN only works in this function
switch(id) {
case 0:
if (record->event.pressed) {
register_code(KC_RSFT);
} else {
unregister_code(KC_RSFT);
}
break;
}
return MACRO_NONE;
};
void matrix_init_user(void) {
}
void matrix_scan_user(void) {
}
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return true;
}
void led_set_user(uint8_t usb_led) {
}

View File

@ -0,0 +1 @@
# The default keymap for unloved_bastard

View File

@ -0,0 +1,138 @@
/*
Copyright 2017 Gabriel Young <gabeplaysdrums@live.com>
Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include <stdint.h>
#include <stdbool.h>
#include <avr/io.h>
#include <util/delay.h>
#include "print.h"
#include "debug.h"
#include "util.h"
#include "matrix.h"
#ifndef DEBOUNCING_DELAY
# define DEBOUNCING_DELAY 5
#endif
static uint8_t debouncing = DEBOUNCING_DELAY;
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
static matrix_row_t scan_col(void) {
return (
(PINC&(1<<7) ? 0 : ((matrix_row_t)1<<0)) |
(PINB&(1<<6) ? 0 : ((matrix_row_t)1<<1)) |
(PINB&(1<<1) ? 0 : ((matrix_row_t)1<<2)) |
(PINB&(1<<0) ? 0 : ((matrix_row_t)1<<3)) |
(PINB&(1<<5) ? 0 : ((matrix_row_t)1<<4)) |
(PINB&(1<<3) ? 0 : ((matrix_row_t)1<<5)) |
(PINB&(1<<4) ? 0 : ((matrix_row_t)1<<6)) |
(PINB&(1<<2) ? 0 : ((matrix_row_t)1<<7))
);
}
static void select_col(uint8_t col) {
switch (col) {
case 0: PORTD = (PORTD & ~0b00111111) | 0b00110011; break;
case 1: PORTD = (PORTD & ~0b00111111) | 0b00100011; break;
case 2: PORTD = (PORTD & ~0b00111111) | 0b00010111; break;
case 3: PORTD = (PORTD & ~0b00111111) | 0b00110011; break;
case 4: PORTD = (PORTD & ~0b00111111) | 0b00010011; break;
case 5: PORTD = (PORTD & ~0b00111111) | 0b00011011; break;
case 6: PORTD = (PORTD & ~0b00111111) | 0b00110100; break;
case 7: PORTD = (PORTD & ~0b00111111) | 0b00111010; break;
case 8: PORTD = (PORTD & ~0b00111111) | 0b00111000; break;
case 9: PORTD = (PORTD & ~0b00111111) | 0b00111100; break;
case 10: PORTD = (PORTD & ~0b00111111) | 0b00110010; break;
case 11: PORTD = (PORTD & ~0b00111111) | 0b00011111; break;
case 12: PORTD = (PORTD & ~0b00111111) | 0b00001111; break;
case 13: PORTD = (PORTD & ~0b00111111) | 0b00100111; break;
case 14: PORTD = (PORTD & ~0b00111111) | 0b00000111; break;
case 15: PORTD = (PORTD & ~0b00111111) | 0b00110110; break;
case 16: PORTD = (PORTD & ~0b00111111) | 0b00001011; break;
case 17: PORTD = (PORTD & ~0b00111111) | 0b00000011; break;
}
}
void matrix_init(void) {
/* Row output pins */
DDRD |= 0b00111111;
/* Column input pins */
DDRC &= ~0b10000000;
DDRB &= ~0b01111111;
PORTC |= 0b10000000;
PORTB |= 0b01111111;
for (uint8_t i=0; i < MATRIX_ROWS; i++)
matrix[i] = matrix_debouncing[i] = 0;
matrix_init_quantum();
}
uint8_t matrix_scan(void) {
for (uint8_t col = 0; col < MATRIX_COLS; col++) {
select_col(col);
_delay_us(3);
matrix_row_t col_scan = scan_col();
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
bool prev_bit = matrix_debouncing[row] & ((matrix_row_t)1<<col);
bool curr_bit = col_scan & (1<<row);
if (prev_bit != curr_bit) {
matrix_debouncing[row] ^= ((matrix_row_t)1<<col);
debouncing = DEBOUNCING_DELAY;
}
}
}
if (debouncing) {
if (--debouncing)
_delay_ms(1);
else
for (uint8_t i = 0; i < MATRIX_ROWS; i++)
matrix[i] = matrix_debouncing[i];
}
matrix_scan_quantum();
return 1;
}
inline matrix_row_t matrix_get_row(uint8_t row) {
return matrix[row];
}
void matrix_print(void) {
#ifndef NO_PRINT
print("\nr\\c ABCDEFGHIJKLMNOPQR\n");
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
matrix_row_t matrix_row = matrix_get_row(row);
xprintf("%02X: ", row);
for (uint8_t col = 0; col < MATRIX_COLS; col++) {
bool curr_bit = matrix_row & (1<<col);
xprintf("%c", curr_bit ? '*' : '.');
}
print("\n");
}
#endif
}
uint8_t matrix_key_count(void) {
uint8_t count = 0;
for (uint8_t row = 0; row < MATRIX_ROWS; row++)
count += bitpop32(matrix[row]);
return count;
}

View File

@ -0,0 +1,15 @@
# unloved_bastard
![unloved_bastard](imgur.com image replace me!)
A short description of the keyboard/project
Keyboard Maintainer: [Alexander Fougner](https://github.com/fougner)
Hardware Supported: CoolerMaster Masterkeys S PBT (Not the Pro versions with backlighting etc)
Hardware Availability: Pretty much anywhere
Make example for this keyboard (after setting up your build environment):
make unloved_bastard:default
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.

View File

@ -0,0 +1,71 @@
# MCU name
#MCU = at90usb1286
MCU = atmega32u2
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Boot Section Size in *bytes*
# Teensy halfKay 512
# Teensy++ halfKay 1024
# Atmel DFU loader 4096
# LUFA bootloader 4096
# USBaspLoader 2048
OPT_DEFS += -DBOOTLOADER_SIZE=4096
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = yes # Console for debug(+400)
COMMAND_ENABLE = yes # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
CUSTOM_MATRIX = yes
SRC += matrix.c

View File

@ -0,0 +1,70 @@
/* Copyright 2018 Alexander Fougner <fougner89 at gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "unloved_bastard.h"
void matrix_init_kb(void) {
// put your keyboard start-up code here
// runs once when the firmware starts up
led_init_ports();
matrix_init_user();
}
void matrix_scan_kb(void) {
// put your looping keyboard code here
// runs every cycle (a lot)
matrix_scan_user();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
// put your per-action keyboard code here
// runs for every action, just before processing by the firmware
return process_record_user(keycode, record);
}
// C5 left
// C6 middle led
// B7 right led
void led_init_ports(void) {
DDRB |= (1<<7);
DDRC |= (1<<5);
DDRC |= (1<<6);
PORTB |= (1<<7);
PORTC |= (1<<5);
PORTC |= (1<<6);
}
void led_set_kb(uint8_t usb_led) {
if (usb_led & (1<<USB_LED_CAPS_LOCK))
PORTC &= ~(1<<5);
else
PORTC |= (1<<5);
if (usb_led & (1<<USB_LED_NUM_LOCK))
PORTB &= ~(1<<7);
else
PORTB |= (1<<7);
if (usb_led & (1<<USB_LED_SCROLL_LOCK))
PORTC &= ~(1<<6);
else
PORTC |= (1<<6);
led_set_user(usb_led);
}

View File

@ -0,0 +1,42 @@
/* Copyright 2017 REPLACE_WITH_YOUR_NAME
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef UNLOVED_BASTARD_H
#define UNLOVED_BASTARD_H
#include "quantum.h"
#define KEYMAP( \
KG6, KH4, KI4, KI2, KI6, KP5, KL6, KM2, KM4, KO4, KO5, KO6, KO0, KN5, KN7, KP7, \
KG4, KG5, KH5, KI5, KJ5, KJ4, KK4, KK5, KL5, KM5, KF5, KF4, KL4, KO2, KR4, KC4, KE4, \
KG2, KG7, KH7, KI7, KJ7, KJ2, KK2, KK7, KL7, KM7, KF7, KF2, KL2, KO3, KQ4, KC5, KE5, \
KH2, KG3, KH3, KI3, KJ3, KJ6, KK6, KK3, KL3, KM3, KF3, KF6, KO1, \
KB2, KH6, KG1, KH1, KI1, KJ1, KJ0, KK0, KK1, KL1, KM1, KF0, KB3, KC6, \
KP4, KN2, KN6, KQ6, KN0, KN3, KM0, KP1, KC0, KQ0, KR0 \
) \
{ \
/* Columns and rows need to be swapped in the below definition */ \
/* A B C D E F G H I J K L M N O P Q R */ \
/* 0 */ { KC_NO, KC_NO, KC0, KC_NO, KC_NO, KF0, KC_NO, KC_NO, KC_NO, KJ0, KK0, KC_NO, KM0, KN0, KO0, KC_NO, KQ0, KR0 }, \
/* 1 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KG1, KH1, KI1, KJ1, KK1, KL1, KM1, KC_NO, KO1, KP1, KC_NO, KC_NO }, \
/* 2 */ { KC_NO, KB2, KC_NO, KC_NO, KC_NO, KF2, KG2, KH2, KI2, KJ2, KK2, KL2, KM2, KN2, KO2, KC_NO, KC_NO, KC_NO }, \
/* 3 */ { KC_NO, KB3, KC_NO, KC_NO, KC_NO, KF3, KG3, KH3, KI3, KJ3, KK3, KL3, KM3, KN3, KO3, KC_NO, KC_NO, KC_NO }, \
/* 4 */ { KC_NO, KC_NO, KC4, KC_NO, KE4, KF4, KG4, KH4, KI4, KJ4, KK4, KL4, KM4, KC_NO, KO4, KP4, KQ4, KR4 }, \
/* 5 */ { KC_NO, KC_NO, KC5, KC_NO, KE5, KF5, KG5, KH5, KI5, KJ5, KK5, KL5, KM5, KN5, KO5, KP5, KC_NO, KC_NO }, \
/* 6 */ { KC_NO, KC_NO, KC6, KC_NO, KC_NO, KF6, KG6, KH6, KI6, KJ6, KK6, KL6, KC_NO,KN6, KO6, KC_NO, KQ6, KC_NO }, \
/* 7 */ { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KF7, KG7, KH7, KI7, KJ7, KK7, KL7, KM7, KN7, KC_NO, KP7, KC_NO, KC_NO } \
}
#endif