Merge remote-tracking branch 'origin/master' into develop

master
QMK Bot 2021-08-13 18:30:33 +00:00
commit 349d36ff89
7 changed files with 266 additions and 0 deletions

View File

@ -0,0 +1,100 @@
/*
Copyright 2021 Logan Butler
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER MatchstickWorks
#define PRODUCT SouthPad
/* key matrix size */
#define MATRIX_ROWS 6
#define MATRIX_COLS 4
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
#define MATRIX_ROW_PINS { B3, B5, B6, B7, C7, C6 }
#define MATRIX_COL_PINS { B0, B1, B2, B4 }
#define UNUSED_PINS
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
/* Bootmagic Lite key configuration */
// #define BOOTMAGIC_LITE_ROW 0
// #define BOOTMAGIC_LITE_COLUMN 0

View File

@ -0,0 +1,34 @@
{
"keyboard_name": "SouthPad",
"url": "",
"maintainer": "MatchstickWorks",
"width": 4,
"height": 6,
"layouts": {
"LAYOUT": {
"layout": [
{"label":"K00 (B3,B0)", "x":0, "y":0},
{"label":"K01 (B3,B1)", "x":1, "y":0},
{"label":"K02 (B3,B2)", "x":2, "y":0},
{"label":"K03 (B3,B4)", "x":3, "y":0},
{"label":"K10 (B5,B0)", "x":0, "y":1},
{"label":"K11 (B5,B1)", "x":1, "y":1},
{"label":"K12 (B5,B2)", "x":2, "y":1},
{"label":"K13 (B5,B4)", "x":3, "y":1},
{"label":"K30 (B7,B0)", "x":0, "y":2, "h":2},
{"label":"K21 (B6,B1)", "x":1, "y":2},
{"label":"K22 (B6,B2)", "x":2, "y":2},
{"label":"K23 (B6,B4)", "x":3, "y":2},
{"label":"K31 (B7,B1)", "x":1, "y":3},
{"label":"K32 (B7,B2)", "x":2, "y":3},
{"label":"K33 (B7,B4)", "x":3, "y":3},
{"label":"K50 (C6,B0)", "x":0, "y":4, "h":2},
{"label":"K41 (C7,B1)", "x":1, "y":4},
{"label":"K42 (C7,B2)", "x":2, "y":4},
{"label":"K43 (C7,B4)", "x":3, "y":4},
{"label":"K51 (C6,B1)", "x":1, "y":5},
{"label":"K53 (C6,B4)", "x":2, "y":5, "w":2}
]
}
}
}

View File

@ -0,0 +1,27 @@
/* Copyright 2021 Logan Butler
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT_numpad_6x4_southpaw( /* Base */
KC_BSPC, KC_EQL, KC_LPRN, KC_RPRN,
KC_PMNS, KC_PAST, KC_PSLS, KC_NLCK,
KC_P9, KC_P8, KC_P7,
KC_PPLS, KC_P6, KC_P5, KC_P4,
KC_P3, KC_P2, KC_P1,
KC_PENT, KC_PDOT, KC_P0
),
};

View File

@ -0,0 +1,23 @@
# SouthPad
![Southpad](https://i.imgur.com/Wl71thnh.jpg)
This is a left-handed (or mirrored) numberpad with USB-C connections.
Default layout is such:
![SouthPad Layout](https://i.imgur.com/jc7T2jl.jpg)
* Keyboard Maintainer: [Logan Butler](https://github.com/MatchstickWorks)
* Hardware Supported: SouthPad PCB
* Hardware Availability: Either via [my Etsy Store](https://www.etsy.com/shop/MatchstickWorksShop) or by messaging directly
Getting the board into bootloader mode:
In order to flash the firmware to this board, simply press the Reset button on the back of the PCB. You should head a USB disconnect and reconnect sound shortly following.
Make example for this keyboard (after setting up your build environment):
make matchstickworks/southpad:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -0,0 +1,22 @@
# MCU name
MCU = atmega32u2
# Bootloader selection
BOOTLOADER = bootloadHID
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output

View File

@ -0,0 +1,16 @@
/* Copyright 2021 Logan Butler
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "southpad.h"

View File

@ -0,0 +1,44 @@
/* Copyright 2021 Logan Butler
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
/* This a shortcut to help you visually see your layout.
*
* The first section contains all of the arguments representing the physical
* layout of the board and position of the keys.
*
* The second converts the arguments into a two-dimensional array which
* represents the switch matrix.
*/
#define LAYOUT_numpad_6x4_southpaw( \
k00, k01, k02, k03, \
k10, k11, k12, k13, \
k21, k22, k23, \
k20, k31, k32, k33, \
k41, k42, k43, \
k40, k51, k53 \
) \
{ \
{ k00, k01, k02, k03 }, \
{ k10, k11, k12, k13 }, \
{ k20, k21, k22, k23 }, \
{ KC_NO, k31, k32, k33 }, \
{ k40, k41, k42, k43 }, \
{ KC_NO, k51, KC_NO, k53 } \
}