Add support for configurable polling interval and power usage o… (#7336)

* Add support for custom polling interval and power usage on V-USB boards

* Use 1ms as default for now
master
fauxpark 2019-11-15 10:21:22 +11:00 committed by GitHub
parent a2eb962704
commit 3047335729
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
50 changed files with 24 additions and 413 deletions

View File

@ -109,20 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -109,20 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -50,6 +50,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DIODE_DIRECTION COL2ROW #define DIODE_DIRECTION COL2ROW
#define NO_UART 1 #define NO_UART 1
#define USB_MAX_POWER_CONSUMPTION 100
/* /*
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.

View File

@ -109,21 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
// max power draw with maxed white underglow measured at 120 mA (peaks)
#define USB_CFG_MAX_BUS_POWER 100
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -48,6 +48,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DIODE_DIRECTION COL2ROW #define DIODE_DIRECTION COL2ROW
#define NO_UART 1 #define NO_UART 1
#define USB_MAX_POWER_CONSUMPTION 100
/* /*
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.

View File

@ -109,21 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
// max power draw with maxed white underglow measured at 120 mA (peaks)
#define USB_CFG_MAX_BUS_POWER 100
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -108,20 +108,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -98,20 +98,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of
@ -380,4 +370,4 @@ section at the end of this file).
#define USB_INTR_ENABLE_BIT INT1 #define USB_INTR_ENABLE_BIT INT1
/* #define USB_INTR_PENDING EIFR */ /* #define USB_INTR_PENDING EIFR */
#define USB_INTR_PENDING_BIT INTF1 #define USB_INTR_PENDING_BIT INTF1
#define USB_INTR_VECTOR INT1_vect #define USB_INTR_VECTOR INT1_vect

View File

@ -108,20 +108,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -108,20 +108,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -98,20 +98,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -108,20 +108,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -108,20 +108,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -51,6 +51,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DIODE_DIRECTION COL2ROW #define DIODE_DIRECTION COL2ROW
#define NO_UART 1 #define NO_UART 1
#define USB_MAX_POWER_CONSUMPTION 100
/* /*
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.

View File

@ -109,21 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
// max power draw with maxed white underglow measured at 120 mA (peaks)
#define USB_CFG_MAX_BUS_POWER 100
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -108,20 +108,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -78,6 +78,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/ */
// #define GRAVE_ESC_CTRL_OVERRIDE // #define GRAVE_ESC_CTRL_OVERRIDE
#define USB_MAX_POWER_CONSUMPTION 100
/* /*
* Force NKRO * Force NKRO
* *

View File

@ -109,21 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
// max power draw with maxed white underglow measured at 120 mA (peaks)
#define USB_CFG_MAX_BUS_POWER 100
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -109,20 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -45,6 +45,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DEBOUNCE 5 #define DEBOUNCE 5
#define NO_UART 1 #define NO_UART 1
#define USB_MAX_POWER_CONSUMPTION 100
/* key combination for magic key command */ /* key combination for magic key command */
/* defined by default; to change, uncomment and set to the combination you want */ /* defined by default; to change, uncomment and set to the combination you want */

View File

@ -109,21 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
// max power draw with maxed white underglow measured at 120 mA (peaks)
#define USB_CFG_MAX_BUS_POWER 100
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -48,6 +48,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DEBOUNCE 5 #define DEBOUNCE 5
#define NO_UART 1 #define NO_UART 1
#define USB_MAX_POWER_CONSUMPTION 100
/* key combination for magic key command */ /* key combination for magic key command */
/* defined by default; to change, uncomment and set to the combination you want */ /* defined by default; to change, uncomment and set to the combination you want */

View File

@ -109,21 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
// max power draw with maxed white underglow measured at 120 mA (peaks)
#define USB_CFG_MAX_BUS_POWER 100
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -109,20 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -108,20 +108,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -109,20 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -109,20 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -109,20 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -108,20 +108,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -108,20 +108,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -109,20 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -109,20 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -108,20 +108,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -50,6 +50,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define DIODE_DIRECTION COL2ROW #define DIODE_DIRECTION COL2ROW
#define NO_UART 1 #define NO_UART 1
#define USB_MAX_POWER_CONSUMPTION 100
/* /*
* Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN. * Split Keyboard specific options, make sure you have 'SPLIT_KEYBOARD = yes' in your rules.mk, and define SOFT_SERIAL_PIN.

View File

@ -109,21 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
// max power draw with maxed white underglow measured at 120 mA (peaks)
#define USB_CFG_MAX_BUS_POWER 100
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -108,20 +108,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -109,20 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -108,20 +108,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -108,20 +108,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -108,20 +108,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -109,20 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -109,20 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -109,20 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -42,6 +42,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define TAPPING_TOGGLE 3 #define TAPPING_TOGGLE 3
#define NO_UART 1 #define NO_UART 1
#define USB_MAX_POWER_CONSUMPTION 100
/* RGB underglow */ /* RGB underglow */
// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards. // The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards.

View File

@ -109,21 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
// max power draw with maxed white underglow measured at 120 mA (peaks)
#define USB_CFG_MAX_BUS_POWER 100
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -108,20 +108,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -41,6 +41,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define NO_UART 1 #define NO_UART 1
#define USB_MAX_POWER_CONSUMPTION 100
/* RGB underglow */ /* RGB underglow */
// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards. // The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards.
// The same pin is used on the JJ40, at least. // The same pin is used on the JJ40, at least.

View File

@ -109,21 +109,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
// max power draw with maxed white underglow measured at 120 mA (peaks)
#define USB_CFG_MAX_BUS_POWER 100
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -98,20 +98,10 @@ section at the end of this file).
* (e.g. HID), but never want to send any data. This option saves a couple * (e.g. HID), but never want to send any data. This option saves a couple
* of bytes in flash memory and the transmit buffers in RAM. * of bytes in flash memory and the transmit buffers in RAM.
*/ */
#define USB_CFG_INTR_POLL_INTERVAL 1
/* If you compile a version with endpoint 1 (interrupt-in), this is the poll
* interval. The value is in milliseconds and must not be less than 10 ms for
* low speed devices.
*/
#define USB_CFG_IS_SELF_POWERED 0 #define USB_CFG_IS_SELF_POWERED 0
/* Define this to 1 if the device has its own power supply. Set it to 0 if the /* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus. * device is powered from the USB bus.
*/ */
#define USB_CFG_MAX_BUS_POWER 500
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]
*/
#define USB_CFG_IMPLEMENT_FN_WRITE 1 #define USB_CFG_IMPLEMENT_FN_WRITE 1
/* Set this to 1 if you want usbFunctionWrite() to be called for control-out /* Set this to 1 if you want usbFunctionWrite() to be called for control-out
* transfers. Set it to 0 if you don't need it and want to save a couple of * transfers. Set it to 0 if you don't need it and want to save a couple of

View File

@ -345,6 +345,15 @@ const PROGMEM uchar mouse_hid_report[] = {
0xc0, // END_COLLECTION 0xc0, // END_COLLECTION
}; };
#ifndef USB_MAX_POWER_CONSUMPTION
# define USB_MAX_POWER_CONSUMPTION 500
#endif
// TODO: change this to 10ms to match LUFA
#ifndef USB_POLLING_INTERVAL_MS
# define USB_POLLING_INTERVAL_MS 1
#endif
/* /*
* Descriptor for compite device: Keyboard + Mouse * Descriptor for compite device: Keyboard + Mouse
* *
@ -366,7 +375,7 @@ const PROGMEM char usbDescriptorConfiguration[] = {
# else # else
(1 << 7), /* attributes */ (1 << 7), /* attributes */
# endif # endif
USB_CFG_MAX_BUS_POWER / 2, /* max USB current in 2mA units */ USB_MAX_POWER_CONSUMPTION / 2, /* max USB current in 2mA units */
/* /*
* Keyboard interface * Keyboard interface
@ -393,7 +402,7 @@ const PROGMEM char usbDescriptorConfiguration[] = {
(char)0x81, /* IN endpoint number 1 */ (char)0x81, /* IN endpoint number 1 */
0x03, /* attrib: Interrupt endpoint */ 0x03, /* attrib: Interrupt endpoint */
8, 0, /* maximum packet size */ 8, 0, /* maximum packet size */
USB_CFG_INTR_POLL_INTERVAL, /* in ms */ USB_POLLING_INTERVAL_MS, /* in ms */
# endif # endif
/* /*
@ -424,7 +433,7 @@ const PROGMEM char usbDescriptorConfiguration[] = {
(char)(0x80 | USB_CFG_EP3_NUMBER), /* IN endpoint number 3 */ (char)(0x80 | USB_CFG_EP3_NUMBER), /* IN endpoint number 3 */
0x03, /* attrib: Interrupt endpoint */ 0x03, /* attrib: Interrupt endpoint */
8, 0, /* maximum packet size */ 8, 0, /* maximum packet size */
USB_CFG_INTR_POLL_INTERVAL, /* in ms */ USB_POLLING_INTERVAL_MS, /* in ms */
# endif # endif
}; };
#endif #endif