Merge branch 'master' of https://github.com/jackhumbert/qmk_firmware
milestogo
commit
2d655b1830
|
|
@ -1,6 +1,6 @@
|
|||
<!-- -*- mode: markdown; fill-column: 8192 -*- -->
|
||||
|
||||
Mnemes Swedish Bonaza
|
||||
Mnemes Swedish Bonanza
|
||||
=======================
|
||||
|
||||
My Layout in process, most of the code is shamelessly stolen from [algernons][algernon] excellent layout
|
||||
|
|
@ -33,6 +33,8 @@ It's for Windows (current work forces me to) and Swedish (matter of birth) so ym
|
|||
- `LEAD s l` : `λ`.
|
||||
- `LEAD s s` : `¯\_(ツ)_/¯`
|
||||
- `LEAD s f` : `凸(ツ)凸`
|
||||
- `LEAD u l` : Set unicode input mode to linux.
|
||||
- `LEAD s w` : Set unicode input mode to windows.
|
||||
- `LEAD a *` : Application switching based on position in start menu. Very specific to my computer.
|
||||
|
||||
|
||||
|
|
|
|||
|
|
@ -1,7 +1,7 @@
|
|||
#define ONESHOT_TIMEOUT 3000
|
||||
#define TAPPING_TERM 200
|
||||
#define PREVENT_STUCK_MODIFIERS
|
||||
|
||||
#define FORCE_NKRO
|
||||
#define LEADER_TIMEOUT 1000
|
||||
|
||||
#include "../../config.h"
|
||||
|
|
|
|||
Binary file not shown.
|
Before Width: | Height: | Size: 448 KiB After Width: | Height: | Size: 446 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 420 KiB After Width: | Height: | Size: 415 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 423 KiB After Width: | Height: | Size: 423 KiB |
|
|
@ -4,6 +4,9 @@
|
|||
#include "action_layer.h"
|
||||
#include "action_util.h"
|
||||
|
||||
/*
|
||||
*WINDOWS SWEDISH
|
||||
*/
|
||||
/*
|
||||
*WINDOWS SWEDISH
|
||||
*/
|
||||
|
|
@ -21,6 +24,7 @@
|
|||
#define KN_DQT LSFT(KC_2) // "
|
||||
#define KN_AT RALT(KC_2) // @
|
||||
#define KN_HASH LSFT(KC_3) // #
|
||||
#define KN_EUR LSFT(KC_4) // €
|
||||
#define KN_DLR RALT(KC_4) // $
|
||||
#define KN_PERC LSFT(KC_5) // %
|
||||
#define KN_AMPR LSFT(KC_6) // &
|
||||
|
|
@ -85,16 +89,10 @@ enum {
|
|||
TD_EQ
|
||||
};
|
||||
|
||||
//Custom keycodes
|
||||
enum {
|
||||
PLACEHOLDER = SAFE_RANGE
|
||||
};
|
||||
|
||||
//State and timers
|
||||
uint16_t kf_timers[12];
|
||||
|
||||
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[BASE] = {
|
||||
|
|
@ -103,14 +101,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
{ KC_TAB ,KC_Q ,KC_W ,KC_E ,KC_R ,KC_T ,KC_NO ,KC_Y ,KC_U ,KC_I ,KC_O ,KC_P ,KN_AO },
|
||||
{ OSM_LCTL ,KC_A ,KC_S ,KC_D ,KC_F ,KC_G ,KC_NO ,KC_H ,KC_J ,KC_K ,KC_L ,KN_OE ,KN_AE },
|
||||
{ OSM_LSFT ,KC_Z ,KC_X ,KC_C ,KC_V ,KC_B ,KC_DELT ,KC_N ,KC_M ,KC_COMM ,KC_DOT ,KN_MINS ,OSM_LSFT },
|
||||
{ MO(NAV) ,OSM_LCTL ,OSM_LALT ,KC_LGUI ,KC_SPC ,LT(SYM,KC_BSPC) ,KC_HYP ,LT(SYM,KC_ENT) ,KC_SPC ,KC_LEAD ,KC_LALT ,KC_LCTRL ,MO(NAV) }
|
||||
{ MO(NAV) ,OSM_LCTL ,OSM_LALT ,KC_LGUI ,MO(SYM) ,KC_BSPC ,KC_ENT ,KC_SPC ,MO(SYM) ,KC_LEAD ,KC_LALT ,KC_LCTRL ,KC_HYP }
|
||||
|
||||
},
|
||||
[NAV] = {
|
||||
|
||||
{ KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS },
|
||||
{ KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_NO ,KC_PGUP ,KC_HOME ,KC_UP ,KC_END ,KC_TRNS ,KC_TRNS },
|
||||
{ KC_TRNS ,KC_LSFT ,KC_LCTL ,KC_LALT ,KC_L ,KC_TRNS ,KC_NO ,KC_PGDN ,KC_LEFT ,KC_DOWN ,KC_RIGHT ,KC_TRNS ,KC_TRNS },
|
||||
{ KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_NO ,KC_HOME ,KC_PGDN ,KC_PGUP ,KC_END ,KC_TRNS ,KC_TRNS },
|
||||
{ KC_TRNS ,KC_LSFT ,KC_LCTL ,KC_LALT ,KC_L ,KC_TRNS ,KC_NO ,KC_LEFT ,KC_DOWN ,KC_UP ,KC_RIGHT ,KC_TRNS ,KC_TRNS },
|
||||
{ KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS },
|
||||
{ KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_VOLD ,KC_VOLU }
|
||||
|
||||
|
|
@ -119,8 +117,8 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
|
||||
{ KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,TD(TD_EQ) ,KC_NO ,TD(TD_FUN) ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS },
|
||||
{ KC_TRNS ,KN_LABK ,KN_RABK ,KN_LCBR ,KN_RCBR ,KN_PLUS ,KC_NO ,KN_AT ,KN_DQT ,KN_QUOT ,KN_GRAV ,KN_SLSH ,KC_TRNS },
|
||||
{ KC_TRNS ,KN_EXLM ,KN_EQL ,KN_LPRN ,KN_RPRN ,KN_MINS ,KC_NO ,KN_UNDS ,KN_SCLN ,KN_COLN ,KN_AMPR ,KN_PIPE ,KC_TRNS },
|
||||
{ KC_TRNS ,KN_DLR ,KN_PERC ,KN_LBRC ,KN_RBRC ,KN_ASTR ,KC_TRNS ,KN_HASH ,KC_COMM ,KC_DOT ,KN_QUES ,KN_BSLS ,KC_TRNS },
|
||||
{ KC_TRNS ,KN_EXLM ,KN_EQL ,KN_LPRN ,KN_RPRN ,KN_MINS ,KC_NO ,KN_UNDS ,KN_CIRC ,KN_DLR ,KN_AMPR ,KN_PIPE ,KC_TRNS },
|
||||
{ KC_TRNS ,KN_EUR ,KN_PERC ,KN_LBRC ,KN_RBRC ,KN_ASTR ,KC_TRNS ,KN_HASH ,KN_SCLN ,KN_COLN ,KN_QUES ,KN_BSLS ,KC_TRNS },
|
||||
{ KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS ,KC_TRNS }
|
||||
|
||||
}
|
||||
|
|
@ -302,6 +300,15 @@ void matrix_scan_user(void) {
|
|||
register_code (KC_LGUI); TAP_ONCE (KC_7); unregister_code (KC_LGUI);
|
||||
}
|
||||
|
||||
SEQ_TWO_KEYS (KC_U, KC_L) {
|
||||
set_unicode_input_mode(UC_LNX);
|
||||
}
|
||||
|
||||
|
||||
SEQ_TWO_KEYS (KC_U, KC_W) {
|
||||
set_unicode_input_mode(UC_WINC);
|
||||
}
|
||||
|
||||
|
||||
SEQ_TWO_KEYS (KC_S, KC_S) {
|
||||
// ¯\_(ツ)_/¯
|
||||
|
|
|
|||
|
|
@ -0,0 +1,3 @@
|
|||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
|
|
@ -0,0 +1,43 @@
|
|||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER GON
|
||||
#define PRODUCT NerD
|
||||
#define DESCRIPTION QMK port for the GON Nerd PCB
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 10
|
||||
#define MATRIX_COLS 9
|
||||
|
||||
/* backlight */
|
||||
#define BACKLIGHT_PIN B7
|
||||
#define BACKLIGHT_LEVELS 3
|
||||
|
||||
/* matrix pins */
|
||||
#define MATRIX_ROW_PINS { B4, E2, F4, F7, F1, F6, C6, F5, D7, C7 }
|
||||
#define MATRIX_COL_PINS { E6, B0, B1, B2, B3, F0, D0, D5, D1 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for magic key command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1 @@
|
|||
#include "gonnerd.h"
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
#ifndef GONNERD_H
|
||||
#define GONNERD_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define KEYMAP_TKL( \
|
||||
K08, K09, K18, K19, K28, K29, K38, K39, K48, K49, K58, K59, K68, K69, K88, K89, \
|
||||
K00, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, K80, K81, K84, \
|
||||
K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, K82, K83, K85, \
|
||||
K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \
|
||||
K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, K86, \
|
||||
K06, K05, K78, K70, K72, K73, K74, K75, K76, K77, K87 \
|
||||
) \
|
||||
{ \
|
||||
{ K00, K10, K20, K30, K40, K50, K60, K70, K80 }, \
|
||||
{ K01, K11, K21, K31, K41, K51, K61, K71, K81 }, \
|
||||
{ K02, K12, K22, K32, K42, K52, K62, K72, K82 }, \
|
||||
{ K03, K13, K23, K33, K43, K53, K63, K73, K83 }, \
|
||||
{ K04, K14, K24, K34, K44, K54, K64, K74, K84 }, \
|
||||
{ K05, K15, K25, K35, K45, K55, K65, K75, K85 }, \
|
||||
{ K06, K16, K26, K36, K46, K56, K66, K76, K86 }, \
|
||||
{ K07, K17, K27, K37, K47, K57, K67, K77, K87 }, \
|
||||
{ K08, K18, K28, K38, K48, K58, K68, K78, K88 }, \
|
||||
{ K09, K19, K29, K39, K49, K59, K69, K79, K89 } \
|
||||
}
|
||||
|
||||
#define KEYMAP_60( \
|
||||
K08, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, \
|
||||
K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, \
|
||||
K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \
|
||||
K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, \
|
||||
K06, K05, K78, K70, K72, K73, K74, K75 \
|
||||
) KEYMAP_TKL( \
|
||||
K08, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, \
|
||||
KC_NO, K01, K10, K11, K20, K21, K30, K31, K40, K41, K50, K51, K60, K61, KC_NO, KC_NO, KC_NO, \
|
||||
K02, K03, K12, K13, K22, K23, K32, K33, K42, K43, K52, K53, K62, K63, KC_NO, KC_NO, KC_NO, \
|
||||
K04, K14, K15, K24, K25, K34, K35, K44, K45, K54, K55, K64, K71, K65, \
|
||||
K07, K79, K16, K17, K26, K27, K36, K37, K46, K47, K56, K57, K66, K67, KC_NO, \
|
||||
K06, K05, K78, K70, K72, K73, K74, K75, KC_NO, KC_NO, KC_NO \
|
||||
)
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,21 @@
|
|||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
|
|
@ -0,0 +1,16 @@
|
|||
#include "gonnerd.h"
|
||||
|
||||
// Keymap layers
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = KEYMAP_60( /* Base */
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS,KC_EQL, KC_BSPC,\
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,KC_RBRC,KC_BSLS,\
|
||||
KC_LCTL,KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT,KC_NO, KC_ENT, \
|
||||
KC_LSFT,KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH,KC_RSFT,KC_NO, \
|
||||
KC_LCTL,KC_LGUI,KC_LALT, KC_SPC, KC_RALT,KC_RGUI,MO(1), KC_RCTL),
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
|
||||
};
|
||||
|
|
@ -0,0 +1,21 @@
|
|||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
|
|
@ -0,0 +1,78 @@
|
|||
#include "gonnerd.h"
|
||||
|
||||
// Keymap layers
|
||||
#define BASE_LAYER 0
|
||||
#define FUNCTION_LAYER 1
|
||||
#define SYSTEM_LAYER 2
|
||||
|
||||
// Key aliases
|
||||
#define __x__ KC_NO
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Layer 0: Default Layer
|
||||
* ,-----------------------------------------------------------.
|
||||
* |Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| = | BSp |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \|
|
||||
* |-----------------------------------------------------------|
|
||||
* |Funct | A| S| D| F| G| H| J| K| L| ;| '|Enter |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift |
|
||||
* |-----------------------------------------------------------'
|
||||
* | Ctl|Alt|Gui | Space |Gui |Alt| F2| Ctl |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
[BASE_LAYER] = KEYMAP_60(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||
MO(1), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, __x__, KC_ENT, \
|
||||
KC_LSFT, __x__, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, __x__, \
|
||||
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, KC_RGUI, KC_RALT, MO(3), KC_RCTL \
|
||||
),
|
||||
|
||||
/* Layer 1: Function Layer
|
||||
* ,-----------------------------------------------------------.
|
||||
* | | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11| F12| Del |
|
||||
* |-----------------------------------------------------------|
|
||||
* | |Prv|Ply|Nxt| | |Pg^|Hme|Up |End| |Br-|Br+| |
|
||||
* |-----------------------------------------------------------|
|
||||
* |Hold |Mte|Vl-|Vl+| | |Pgv|Lft|Dwn|Rgt| | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------'
|
||||
* | | | | | | | | |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
[FUNCTION_LAYER] = KEYMAP_60(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_DEL, \
|
||||
__x__, KC_MPRV, KC_MPLY, KC_MNXT, __x__, __x__, KC_PGUP, KC_HOME, KC_UP, KC_END, __x__, KC_SLCK, KC_PAUS, __x__, \
|
||||
KC_TRNS, KC_MUTE, KC_VOLD, KC_VOLU, __x__, __x__, KC_PGDN, KC_LEFT, KC_DOWN, KC_RGHT, __x__, __x__, __x__, __x__, \
|
||||
KC_LSFT, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
|
||||
KC_LCTL, KC_LALT, KC_LGUI, KC_SPC, __x__, __x__, __x__, __x__ \
|
||||
),
|
||||
|
||||
/* Layer 2: System Layer
|
||||
* ,-----------------------------------------------------------.
|
||||
* |Reset| | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------'
|
||||
* | | | | | | | | |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
[SYSTEM_LAYER] = KEYMAP_60(
|
||||
RESET, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
|
||||
__x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
|
||||
__x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
|
||||
__x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, __x__, \
|
||||
__x__, __x__, __x__, __x__, __x__, __x__, KC_TRNS, __x__ \
|
||||
),
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
|
||||
};
|
||||
|
|
@ -0,0 +1,5 @@
|
|||
# Mauin's keymap for the GON NerD
|
||||
|
||||
This layout is based on a Pok3r style layout with a standard base layer.
|
||||
|
||||
Function layers provide access to navigation and media keys.
|
||||
|
|
@ -0,0 +1,34 @@
|
|||
GON NerD keyboard firmware
|
||||
======================
|
||||
|
||||
## Changing Bootloader
|
||||
|
||||
It's not possible to simply flash this firmware on the GON NerD keyboard as the original bootloader does not support DFU connections.
|
||||
|
||||
It is possible to change the bootloader of the GON NerD with an ISP programmer. A guide on how to change the bootloader on your GON NerD can be found here:
|
||||
[Converting NerD60 to TMK](https://deskthority.net/wiki/Converting_NerD60_to_TMK). After changing the bootloader you can flash your QMK keymap onto the keyboard.
|
||||
|
||||
_After changing the bootloader on your GON NerD PCB you will not be able to go back to the original firmware and the official configuration software will
|
||||
not work anymore. You will lose your warranty and official support from GON!_
|
||||
|
||||
## Building
|
||||
|
||||
Download or clone the whole firmware and navigate to the keyboards/gonnerd folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
|
||||
|
||||
Depending on which keymap you would like to use, you will have to compile slightly differently.
|
||||
|
||||
### Default
|
||||
|
||||
To build with the default keymap, simply run `make default`.
|
||||
|
||||
### Other Keymaps
|
||||
|
||||
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
|
||||
|
||||
To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
|
||||
|
||||
```
|
||||
$ make [default|jack|<name>]
|
||||
```
|
||||
|
||||
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
|
||||
|
|
@ -0,0 +1,66 @@
|
|||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 8000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= no # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
|
|
@ -43,28 +43,97 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#define MATRIX_ROW_PINS { D7, C6, D0, D1, F5, F4, F1, F0 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* define if matrix has ghost */
|
||||
// #define BACKLIGHT_PIN B7
|
||||
// #define BACKLIGHT_BREATHING
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
#define BACKLIGHT_LEVELS 3
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
// #define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
// #define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT) | MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RCTRL)) \
|
||||
)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
|
|
|
|||
|
|
@ -14,4 +14,11 @@
|
|||
#define RGB_DI_PIN B5
|
||||
#define RGBSPS_NUM 57
|
||||
|
||||
#define LAYOUT_DVORAK
|
||||
#define LAYOUT_COLEMAK
|
||||
#define LAYOUT_NORMAN
|
||||
#define LAYOUT_WORKMAN
|
||||
|
||||
#define DOUBLESPACE_LAYER_ENABLE
|
||||
|
||||
#endif
|
||||
|
|
|
|||
File diff suppressed because it is too large
Load Diff
|
|
@ -1,6 +1,38 @@
|
|||
#include "promethium.h"
|
||||
#include "analog.h"
|
||||
#include "timer.h"
|
||||
#include "matrix.h"
|
||||
|
||||
// cubic fit {3.3, 0}, {3.5, 2.9}, {3.6, 5}, {3.7, 8.6}, {3.8, 36}, {3.9, 62}, {4.0, 73}, {4.05, 83}, {4.1, 89}, {4.15, 94}, {4.2, 100}
|
||||
|
||||
uint8_t battery_level(void) {
|
||||
float voltage = analogRead(BATTERY_PIN) * 2 * 3.3 / 1024;
|
||||
if (voltage < MIN_VOLTAGE) return 0;
|
||||
if (voltage > MAX_VOLTAGE) return 255;
|
||||
return (voltage - MIN_VOLTAGE) / (MAX_VOLTAGE - MIN_VOLTAGE) * 255;
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void battery_poll(uint8_t level) {
|
||||
}
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
static uint16_t counter = BATTERY_POLL;
|
||||
counter++;
|
||||
|
||||
if (counter > BATTERY_POLL) {
|
||||
counter = 0;
|
||||
battery_poll(battery_level());
|
||||
}
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -4,6 +4,11 @@
|
|||
#include "quantum.h"
|
||||
|
||||
#define PS2_INIT_DELAY 2000
|
||||
#define UNICODE_TYPE_DELAY 0
|
||||
#define BATTERY_PIN 9
|
||||
#define BATTERY_POLL 30000
|
||||
#define MAX_VOLTAGE 4.2
|
||||
#define MIN_VOLTAGE 3.2
|
||||
|
||||
#define KEYMAP( \
|
||||
k11, k12, k13, k14, k15, k16, k17, k18, k19, k1a, k1b, k1c, \
|
||||
|
|
@ -22,6 +27,8 @@
|
|||
{k47, k48, k49, k4a, k4b, k4c} \
|
||||
}
|
||||
|
||||
|
||||
|
||||
enum led_sequence {
|
||||
LED_IND_BLUETOOTH,
|
||||
LED_IND_USB,
|
||||
|
|
@ -98,4 +105,4 @@ enum led_sequence {
|
|||
|
||||
#endif
|
||||
|
||||
|
||||
void battery_poll(uint8_t level);
|
||||
|
|
@ -22,3 +22,52 @@ void rgbsps_turnoff(void) {
|
|||
void rgbsps_send(void) {
|
||||
ws2812_setleds(led, RGBSPS_NUM);
|
||||
}
|
||||
|
||||
void rgbsps_sethsv(uint8_t index, uint16_t hue, uint8_t sat, uint8_t val) {
|
||||
uint8_t r = 0, g = 0, b = 0, base, color;
|
||||
|
||||
if (sat == 0) { // Acromatic color (gray). Hue doesn't mind.
|
||||
r = val;
|
||||
g = val;
|
||||
b = val;
|
||||
} else {
|
||||
base = ((255 - sat) * val) >> 8;
|
||||
color = (val - base) * (hue % 60) / 60;
|
||||
|
||||
switch (hue / 60) {
|
||||
case 0:
|
||||
r = val;
|
||||
g = base + color;
|
||||
b = base;
|
||||
break;
|
||||
case 1:
|
||||
r = val - color;
|
||||
g = val;
|
||||
b = base;
|
||||
break;
|
||||
case 2:
|
||||
r = base;
|
||||
g = val;
|
||||
b = base + color;
|
||||
break;
|
||||
case 3:
|
||||
r = base;
|
||||
g = val - color;
|
||||
b = val;
|
||||
break;
|
||||
case 4:
|
||||
r = base + color;
|
||||
g = base;
|
||||
b = val;
|
||||
break;
|
||||
case 5:
|
||||
r = val;
|
||||
g = base;
|
||||
b = val - color;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
rgbsps_set(index, r, g, b);
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -2,3 +2,4 @@ void rgbsps_set(uint8_t index, uint8_t r, uint8_t g, uint8_t b);
|
|||
void rgbsps_setall(uint8_t r, uint8_t g, uint8_t b);
|
||||
void rgbsps_turnoff(void);
|
||||
void rgbsps_send(void);
|
||||
void rgbsps_sethsv(uint8_t index, uint16_t hue, uint8_t sat, uint8_t val);
|
||||
|
|
@ -73,3 +73,4 @@ SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
|||
|
||||
SRC += $(QUANTUM_DIR)/light_ws2812.c
|
||||
SRC += rgbsps.c
|
||||
SRC += $(QUANTUM_DIR)/analog.c
|
||||
|
|
@ -15,7 +15,7 @@ To build, run "make" from within the \bone2planck folder.
|
|||
,-----------------------------------------------------------------------------------.
|
||||
| ß | J | D | U | A | X | P | H | L | M | W | Q |
|
||||
|------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
| M1 | C | T | I | E | O | B | N | R | S | G |M1/Ent| hold for M1, tap for Enter
|
||||
| M1 | C | T | I | E | O | B | N | R | S | G |M1/Ent| hold: M1, tap: Enter
|
||||
|------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
| Shift| F | V | Ü | Ä | Ö | Y | Z | , | . | K |Shift |
|
||||
|------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
|
|
@ -29,7 +29,7 @@ To build, run "make" from within the \bone2planck folder.
|
|||
,-----------------------------------------------------------------------------------.
|
||||
| ° | @ | _ | [ | ] | ^ | ! | < | > | = | & | ´ |
|
||||
|------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
| M1 | \ | / | { | } | * | ? | ( | ) | - | : |M1/Ent| hold for M1, tap for Enter
|
||||
| M1 | \ | / | { | } | * | ? | ( | ) | - | : |M1/Ent| hold: M1, tap: Enter
|
||||
|------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
| Shift| # | ~ | | | $ | € | + | % | " | ' | ; |Shift |
|
||||
|------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
|
|
@ -56,7 +56,7 @@ To build, run "make" from within the \bone2planck folder.
|
|||
,-----------------------------------------------------------------------------------.
|
||||
| | | Print|Scroll|Pause | | | F7 | F8 | F9 | F12 | |
|
||||
|------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
| | | Mute | Vol- | Vol+ | | ³ | F4 | F5 | F6 | F11 | |
|
||||
| Tab | | Mute | Vol- | Vol+ | | ³ | F4 | F5 | F6 | F11 | Enter|
|
||||
|------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
| Shift| | Prev | Play | Next | | ² | F1 | F2 | F3 | F10 |Shift |
|
||||
|------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
|
|
@ -87,7 +87,7 @@ To build, run "make" from within the \bone2planck folder.
|
|||
,-----------------------------------------------------------------------------------.
|
||||
| | | F7 | F8 | F9 | F12 | | Print|Scroll| Pause| | |
|
||||
|------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
| | ³ | F4 | F5 | F6 | F11 | | Mute | Vol- | Vol+ | | |
|
||||
| Tab | ³ | F4 | F5 | F6 | F11 | | Mute | Vol- | Vol+ | | Enter|
|
||||
|------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
| Shift| ² | F1 | F2 | F3 | F10 | | Prev | Play | Next | |Shift |
|
||||
|------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
|
|
|
|||
|
|
@ -39,6 +39,7 @@ These keyboards are part of the QMK repository, but their manufacturers are not
|
|||
* [Bantam44](/keyboards/bantam44) — It is a 44-key 40% staggered keyboard.
|
||||
* [Ergodox Infinity](/keyboards/ergodox) - Ergonomic Split Keyboard by Input Club.
|
||||
* [GH60](/keyboards/gh60) — A 60% Geekhack community-driven project.
|
||||
* [GON NerD](/keyboards/gonnerd) — Korean custom 60% PCB
|
||||
* [Happy Hacking Keyboard](/keyboards/hhkb) — The Happy Hacking keyboard can be hacked with a custom controller to run QMK.
|
||||
* [Infinity 60%](/keyboards/infinity60) - — Compact community keyboard by Input Club.
|
||||
* [JD45](/keyboards/jd45) — Another Geekhack community project, designed by jdcarpe.
|
||||
|
|
|
|||
|
|
@ -120,7 +120,7 @@ action_t action_for_key(uint8_t layer, keypos_t key)
|
|||
action.code = ACTION_MODS_ONESHOT(mod);
|
||||
break;
|
||||
case QK_MOD_TAP ... QK_MOD_TAP_MAX:
|
||||
action.code = ACTION_MODS_TAP_KEY((keycode >> 0x8) & 0xF, keycode & 0xFF);
|
||||
action.code = ACTION_MODS_TAP_KEY((keycode >> 0x8) & 0x1F, keycode & 0xFF);
|
||||
break;
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
case BL_0 ... BL_15:
|
||||
|
|
|
|||
|
|
@ -139,7 +139,7 @@ void unicode_map_input_error() {}
|
|||
bool process_unicode_map(uint16_t keycode, keyrecord_t *record) {
|
||||
if ((keycode & QK_UNICODE_MAP) == QK_UNICODE_MAP && record->event.pressed) {
|
||||
const uint32_t* map = unicode_map;
|
||||
uint16_t index = keycode & 0x7FF;
|
||||
uint16_t index = keycode - QK_UNICODE_MAP;
|
||||
uint32_t code = pgm_read_dword_far(&map[index]);
|
||||
if (code > 0xFFFF && code <= 0x10ffff && input_mode == UC_OSX) {
|
||||
// Convert to UTF-16 surrogate pair
|
||||
|
|
|
|||
|
|
@ -39,14 +39,14 @@ enum quantum_keycodes {
|
|||
QK_CHORDING = 0x5600,
|
||||
QK_CHORDING_MAX = 0x56FF,
|
||||
#endif
|
||||
QK_MOD_TAP = 0x6000,
|
||||
QK_MOD_TAP_MAX = 0x6FFF,
|
||||
QK_TAP_DANCE = 0x7100,
|
||||
QK_TAP_DANCE_MAX = 0x71FF,
|
||||
QK_TAP_DANCE = 0x5700,
|
||||
QK_TAP_DANCE_MAX = 0x57FF,
|
||||
#ifdef UNICODEMAP_ENABLE
|
||||
QK_UNICODE_MAP = 0x7800,
|
||||
QK_UNICODE_MAP_MAX = 0x7FFF,
|
||||
QK_UNICODE_MAP = 0x5800,
|
||||
QK_UNICODE_MAP_MAX = 0x5BFF,
|
||||
#endif
|
||||
QK_MOD_TAP = 0x6000,
|
||||
QK_MOD_TAP_MAX = 0x7FFF,
|
||||
#ifdef UNICODE_ENABLE
|
||||
QK_UNICODE = 0x8000,
|
||||
QK_UNICODE_MAX = 0xFFFF,
|
||||
|
|
@ -54,7 +54,7 @@ enum quantum_keycodes {
|
|||
|
||||
// Loose keycodes - to be used directly
|
||||
|
||||
RESET = 0x7000,
|
||||
RESET = 0x5C00,
|
||||
DEBUG,
|
||||
MAGIC_SWAP_CONTROL_CAPSLOCK,
|
||||
MAGIC_CAPSLOCK_TO_CONTROL,
|
||||
|
|
@ -298,15 +298,29 @@ enum quantum_keycodes {
|
|||
#define OSM(mod) (mod | QK_ONE_SHOT_MOD)
|
||||
|
||||
// M-od, T-ap - 256 keycode max
|
||||
#define MT(mod, kc) (kc | QK_MOD_TAP | ((mod & 0xF) << 8))
|
||||
#define MT(mod, kc) (kc | QK_MOD_TAP | ((mod & 0x1F) << 8))
|
||||
|
||||
#define CTL_T(kc) MT(MOD_LCTL, kc)
|
||||
#define LCTL_T(kc) MT(MOD_LCTL, kc)
|
||||
#define RCTL_T(kc) MT(MOD_RCTL, kc)
|
||||
|
||||
#define SFT_T(kc) MT(MOD_LSFT, kc)
|
||||
#define LSFT_T(kc) MT(MOD_LSFT, kc)
|
||||
#define RSFT_T(kc) MT(MOD_RSFT, kc)
|
||||
|
||||
#define ALT_T(kc) MT(MOD_LALT, kc)
|
||||
#define LALT_T(kc) MT(MOD_LALT, kc)
|
||||
#define RALT_T(kc) MT(MOD_RALT, kc)
|
||||
#define ALGR_T(kc) MT(MOD_RALT, kc) // dual-function AltGR
|
||||
|
||||
#define GUI_T(kc) MT(MOD_LGUI, kc)
|
||||
#define LGUI_T(kc) MT(MOD_LGUI, kc)
|
||||
#define RGUI_T(kc) MT(MOD_RGUI, kc)
|
||||
|
||||
#define C_S_T(kc) MT((MOD_LCTL | MOD_LSFT), kc) // Control + Shift e.g. for gnome-terminal
|
||||
#define MEH_T(kc) MT((MOD_LCTL | MOD_LSFT | MOD_LALT), kc) // Meh is a less hyper version of the Hyper key -- doesn't include Win or Cmd, so just alt+shift+ctrl
|
||||
#define LCAG_T(kc) MT((MOD_LCTL | MOD_LALT | MOD_LGUI), kc) // Left control alt and gui
|
||||
#define RCAG_T(kc) MT((MOD_RCTL | MOD_RALT | MOD_RGUI), kc) // Right control alt and gui
|
||||
#define ALL_T(kc) MT((MOD_LCTL | MOD_LSFT | MOD_LALT | MOD_LGUI), kc) // see http://brettterpstra.com/2012/12/08/a-useful-caps-lock-key/
|
||||
#define SCMD_T(kc) MT((MOD_LGUI | MOD_LSFT), kc)
|
||||
#define SWIN_T(kc) SCMD_T(kc)
|
||||
|
|
|
|||
|
|
@ -23,7 +23,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#define PS2_MOUSE_SEND(command, message) \
|
||||
do { \
|
||||
uint8_t rcv = ps2_host_send(command); \
|
||||
__attribute__ ((unused)) uint8_t rcv = ps2_host_send(command); \
|
||||
if (debug_mouse) { \
|
||||
print((message)); \
|
||||
xprintf(" command: %X, result: %X, error: %X \n", command, rcv, ps2_error); \
|
||||
|
|
@ -55,13 +55,14 @@ do { \
|
|||
|
||||
#define PS2_MOUSE_RECEIVE(message) \
|
||||
do { \
|
||||
uint8_t rcv = ps2_host_recv_response(); \
|
||||
__attribute__ ((unused)) uint8_t rcv = ps2_host_recv_response(); \
|
||||
if (debug_mouse) { \
|
||||
print((message)); \
|
||||
xprintf(" result: %X, error: %X \n", rcv, ps2_error); \
|
||||
} \
|
||||
} while(0)
|
||||
|
||||
__attribute__ ((unused))
|
||||
static enum ps2_mouse_mode_e {
|
||||
PS2_MOUSE_STREAM_MODE,
|
||||
PS2_MOUSE_REMOTE_MODE,
|
||||
|
|
|
|||
|
|
@ -11,7 +11,7 @@ if [[ "$TRAVIS_COMMIT_MESSAGE" != *"[skip build]"* ]] ; then
|
|||
make all-keyboards AUTOGEN="true"
|
||||
: $((exit_code = $exit_code + $?))
|
||||
else
|
||||
MKB=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -oP '(?<=keyboards\/)([a-zA-Z0-9_]+)' | sort -u)
|
||||
MKB=$(git diff --name-only -n 1 ${TRAVIS_COMMIT_RANGE} | grep -oP '(?<=keyboards\/)([a-zA-Z0-9_]+)(?=\/)' | sort -u)
|
||||
for KB in $MKB ; do
|
||||
echo "Making all keymaps for $KB"
|
||||
make "$KB" AUTOGEN=true
|
||||
|
|
|
|||
Loading…
Reference in New Issue