[Keyboard] Add ISOlation and some kb-elmo keyboard updates (#14656)

Co-authored-by: Drashna Jaelre <drashna@live.com>
master
kb-elmo 2021-10-12 04:25:28 +02:00 committed by GitHub
parent bedecd3cbc
commit 25eac95348
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
10 changed files with 205 additions and 5 deletions

View File

@ -0,0 +1,62 @@
/*
Copyright 2021 kb-elmo<mail@elmo.space>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xA68C
#define PRODUCT_ID 0x4EE6
#define DEVICE_VER 0x0001
#define MANUFACTURER kb-elmo
#define PRODUCT ISOlation
/* key matrix size */
#define MATRIX_ROWS 1
#define MATRIX_COLS 1
/* direct key pin */
#define DIRECT_PINS {{ B0 }}
#define UNUSED_PINS
/* RGB backlight */
#define RGB_DI_PIN B2
#ifdef RGB_DI_PIN
# define RGBLED_NUM 3
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
# define RGBLIGHT_EFFECT_KNIGHT
# define RGBLIGHT_EFFECT_CHRISTMAS
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
#endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCE 5
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION

View File

@ -0,0 +1,12 @@
{
"keyboard_name": "isolation",
"url": "",
"maintainer": "kb-elmo",
"layouts": {
"LAYOUT": {
"layout": [
{"x":0.25, "y":0, "w":1.25, "h":2}
]
}
}
}

View File

@ -0,0 +1,17 @@
/* Copyright 2021 kb-elmo<mail@elmo.space>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "isolation.h"

View File

@ -0,0 +1,25 @@
/* Copyright 2021 kb-elmo<mail@elmo.space>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
#define LAYOUT( \
k00 \
) { \
{ k00 } \
}

View File

@ -0,0 +1,22 @@
/* Copyright 2021 kb-elmo<mail@elmo.space>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[0] = LAYOUT(
KC_ENT
)
};

View File

@ -0,0 +1,24 @@
# ISOlation
![isolation](https://i.imgur.com/Pe1tWzJl.jpg)
A seamless ISO single-key "macropad"
* Keyboard Maintainer: [kb-elmo](https://github.com/kb-elmo)
* Hardware Supported: ISOlation RGB PCB
* Hardware Availability: [Open source project](https://github.com/kb-elmo/ISOlation)
Make example for this keyboard (after setting up your build environment):
make kb_elmo/isolation:default
Flashing example for this keyboard:
make kb_elmo/isolation:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
* **Bootmagic reset**: Hold down the enter key and plug in the keyboard
* **Bootloader pins**: Short the two pins labeled "BOOT" while plugging the board

View File

@ -0,0 +1,24 @@
# MCU name
MCU = atmega328p
# Processor frequency
F_CPU = 16000000
# Bootloader selection
BOOTLOADER = usbasploader
# Build Options
# change yes to no to disable
#
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
AUDIO_ENABLE = no # Audio output

View File

@ -53,5 +53,5 @@
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09 }, \
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19 }, \
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29 }, \
{ ___, k31, k32, ___, ___, k35, ___, k37, k38, k39 } \
{ ___, k31, ___, ___, ___, k35, ___, ___, k38, k39 } \
}

View File

@ -1,15 +1,24 @@
# Sesame
![sesame](https://i.imgur.com/IdudbWjl.jpg)
![sesame](https://i.imgur.com/DNQMl8hl.jpg)
Alice layout THT keyboard
* Keyboard Maintainer: [kb-elmo](https://github.com/kb-elmo)
* Hardware Supported: Sesame
* Hardware Availability: [Project is open source](https://github.com/kb-elmo/sesame)
* Hardware Supported: Sesame PCB rev.1 and rev.2
* Hardware Availability: [Open source project](https://github.com/kb-elmo/sesame)
Make example for this keyboard (after setting up your build environment):
make kb_elmo/sesame:default
Flashing example for this keyboard:
make kb_elmo/sesame:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
* **Bootmagic reset**: Hold down the top left key and plug in the keyboard
* **Physical reset button**: Hold down the button labeled "BOOT" and briefly press the button labeled "RESET" on the back of the PCB

View File

@ -1,6 +1,6 @@
# Twelvekey
![twelvekey](https://i.imgur.com/xBQIvpml.png)
![twelvekey](https://i.imgur.com/59sSO8kl.jpg)
Simple 12-key macropad
@ -17,3 +17,8 @@ Flashing example for this keyboard:
make kb_elmo/twelvekey:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
* **Bootmagic reset**: Hold down the top left key and plug in the keyboard
* **Physical reset button**: Hold down the button labeled "BOOT" and briefly press the button labeled "RESET" on the back of the PCB