New Keyboard: ZJ68 (#6378)

* added zj68 keyboard

* Suggested changes

* Suggested changes

* Suggested changes

* Requested changes

* Update keyboards/zj68/rules.mk

Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>
master
Collin Diekvoss 2019-07-22 12:17:11 -05:00 committed by MechMerlin
parent d3ebf903c9
commit 17ff9cf554
10 changed files with 387 additions and 0 deletions

View File

@ -0,0 +1,64 @@
/*
Copyright 2019 Collin Diekvoss <cdiekvoss@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x6060
#define DEVICE_VER 0x0001
#define MANUFACTURER Drop
#define PRODUCT ZJ68
#define DESCRIPTION QMK ZJ68
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 15
/* key matrix pins */
#define MATRIX_ROW_PINS { B0, B1, B2, B3, B7 }
#define MATRIX_COL_PINS { D0, D1, D2, D3, D5, D4, D6, D7, B4, F7, F6, F5, F4, F1, F0 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION ROW2COL
/* number of backlight levels */
#define BACKLIGHT_PIN B6
#ifdef BACKLIGHT_PIN
#define BACKLIGHT_LEVELS 5
#endif
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
#define RGB_DI_PIN E2
#ifdef RGB_DI_PIN
#define RGBLIGHT_ANIMATIONS
#define RGBLED_NUM 14
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#endif

View File

@ -0,0 +1,86 @@
{
"keyboard_name": "ZJ68",
"maintainer": "qmk",
"width": 16,
"height": 5,
"layouts": {
"LAYOUT_all": {
"layout": [
{ "label": "~", "x": 0, "y": 0 },
{ "label": "!", "x": 1, "y": 0 },
{ "label": "@", "x": 2, "y": 0 },
{ "label": "#", "x": 3, "y": 0 },
{ "label": "$", "x": 4, "y": 0 },
{ "label": "%", "x": 5, "y": 0 },
{ "label": "^", "x": 6, "y": 0 },
{ "label": "&", "x": 7, "y": 0 },
{ "label": "*", "x": 8, "y": 0 },
{ "label": "(", "x": 9, "y": 0 },
{ "label": ")", "x": 10, "y": 0 },
{ "label": "_", "x": 11, "y": 0 },
{ "label": "+", "x": 12, "y": 0 },
{ "x": 13, "y": 0 },
{ "x": 14, "y": 0 },
{ "x": 15, "y": 0 },
{ "label": "Tab", "x": 0, "y": 1, "w": 1.5 },
{ "label": "Q", "x": 1.5, "y": 1 },
{ "label": "W", "x": 2.5, "y": 1 },
{ "label": "E", "x": 3.5, "y": 1 },
{ "label": "R", "x": 4.5, "y": 1 },
{ "label": "T", "x": 5.5, "y": 1 },
{ "label": "Y", "x": 6.5, "y": 1 },
{ "label": "U", "x": 7.5, "y": 1 },
{ "label": "I", "x": 8.5, "y": 1 },
{ "label": "O", "x": 9.5, "y": 1 },
{ "label": "P", "x": 10.5, "y": 1 },
{ "label": "{", "x": 11.5, "y": 1 },
{ "label": "}", "x": 12.5, "y": 1 },
{ "label": "|", "x": 13.5, "y": 1, "w": 1.5 },
{ "x": 15, "y": 1 },
{ "label": "Caps Lock", "x": 0, "y": 2, "w": 1.75 },
{ "label": "A", "x": 1.75, "y": 2 },
{ "label": "S", "x": 2.75, "y": 2 },
{ "label": "D", "x": 3.75, "y": 2 },
{ "label": "F", "x": 4.75, "y": 2 },
{ "label": "G", "x": 5.75, "y": 2 },
{ "label": "H", "x": 6.75, "y": 2 },
{ "label": "J", "x": 7.75, "y": 2 },
{ "label": "K", "x": 8.75, "y": 2 },
{ "label": "L", "x": 9.75, "y": 2 },
{ "label": ":", "x": 10.75, "y": 2 },
{ "label": "\"", "x": 11.75, "y": 2 },
{ "label": "Enter", "x": 12.75, "y": 2, "w": 2.25 },
{ "x": 15, "y": 2 },
{ "label": "Shift", "x": 0, "y": 3, "w": 1.25 },
{ "x": 1.25, "y": 3 },
{ "label": "Z", "x": 2.25, "y": 3 },
{ "label": "X", "x": 3.25, "y": 3 },
{ "label": "C", "x": 4.25, "y": 3 },
{ "label": "V", "x": 5.25, "y": 3 },
{ "label": "B", "x": 6.25, "y": 3 },
{ "label": "N", "x": 7.25, "y": 3 },
{ "label": "M", "x": 8.25, "y": 3 },
{ "label": "<", "x": 9.25, "y": 3 },
{ "label": ">", "x": 10.25, "y": 3 },
{ "label": "?", "x": 11.25, "y": 3 },
{ "label": "Shift", "x": 12.25, "y": 3, "w": 1.75 },
{ "x": 14, "y": 3 },
{ "x": 15, "y": 3 },
{ "label": "Ctrl", "x": 0, "y": 4, "w": 1.25 },
{ "label": "Win", "x": 1.25, "y": 4, "w": 1.25 },
{ "label": "Alt", "x": 2.5, "y": 4, "w": 1.25 },
{ "x": 3.75, "y": 4, "w": 6.25 },
{ "label": "Alt", "x": 10, "y": 4 },
{ "label": "Win", "x": 11, "y": 4 },
{ "x": 12, "y": 4 },
{ "x": 13, "y": 4 },
{ "x": 14, "y": 4 },
{ "x": 15, "y": 4 }
]
}
}
}

View File

@ -0,0 +1,35 @@
/* Copyright 2019 Collin Diekvoss <cdiekvoss@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
LAYOUT_all(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_NO, KC_BSPC, KC_DEL,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGUP,
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGDN,
KC_LSFT, KC_NO, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, MO(1),
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, KC_RALT, KC_APP, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
),
LAYOUT_all(
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NO, RESET, KC_PSCR,
RGB_TOG, _______, KC_UP, _______, RGB_MOD, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME,
BL_TOGG, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, RGB_HUI, RGB_SAI, RGB_VAI, _______, _______, _______, KC_END,
_______, _______, _______, BL_DEC, BL_INC, BL_STEP, _______, _______, RGB_HUD, RGB_SAD, RGB_VAD, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______
),
};

View File

@ -0,0 +1,3 @@
# ZJ68 Default layout
This is the default layout from the json file provided on Drop, that was intended to be used on kbdfirmware, with an added soft reset on fn(backspace).

View File

@ -0,0 +1,34 @@
/* Copyright 2019 Collin Diekvoss <cdiekvoss@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
LAYOUT_65_ansi_split_bs(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_GRV, KC_INS,
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSPC, KC_DEL,
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_PGUP,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_PGDN,
MO(1), KC_LGUI, KC_LALT, KC_SPC, KC_RALT, MO(1), KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT
),
LAYOUT_65_ansi_split_bs(
RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_SLCK, KC_PAUS,
KC_CAPS, KC_MPRV, KC_MPLY, KC_MNXT, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, KC_VOLD, KC_VOLU, KC_MUTE, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_HOME,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_END,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______
),
};

View File

@ -0,0 +1,3 @@
# ZJ68 W/ Split Backspace
The plate that comes with the kit from Drop only allows one layout, but the pcb supports having a split backspace, so by widening the plate where the stabilizers are meant to go, you can fit the two switches in, if you want to go back to a single backspace later, you can still use pcb mount stabilizers.

View File

@ -0,0 +1,15 @@
# ZJ68
![JZ68](https://i.imgur.com/bcsfQyt.jpg)
A 65% keyboard kit sold through Drop.
Keyboard Maintainer: QMK Community
Hardware Supported: ZJ68 PCB
Hardware Availability: [Drop](https://drop.com/buy/zj68-68-key-mechanical-keyboard-kit?mode=guest_open)
Make example for this keyboard (after setting up your build environment):
make zj68:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -0,0 +1,63 @@
# MCU name
MCU = atmega32u4
# Processor frequency.
# This will define a symbol, F_CPU, in all source code files equal to the
# processor frequency in Hz. You can then use this symbol in your source code to
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
# automatically to create a 32-bit value in your source code.
#
# This will be an integer division of F_USB below, as it is sourced by
# F_USB after it has run through any CPU prescalers. Note that this value
# does not *change* the processor frequency - it should merely be updated to
# reflect the processor speed set externally so that the code can use accurate
# software delays.
F_CPU = 16000000
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task(+60)
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
# Bootloader selection
# Teensy halfkay
# Pro Micro caterina
# Atmel DFU atmel-dfu
# LUFA DFU lufa-dfu
# QMK DFU qmk-dfu
# atmega32a bootloadHID
BOOTLOADER = atmel-dfu
# Build Options
# comment out to disable the options.
#
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
AUDIO_ENABLE = no
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
RGBLIGHT_ENABLE = no
LAYOUTS = 65_ansi

View File

@ -0,0 +1,24 @@
/* Copyright 2019 Collin Diekvoss <cdiekvoss@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "zj68.h"
void matrix_init_kb(void) {
matrix_init_user();
}
void matrix_scan_kb(void) {
matrix_scan_user();
}

View File

@ -0,0 +1,60 @@
/* Copyright 2019 Collin Diekvoss <cdiekvoss@gmail.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
#define LAYOUT_65_ansi( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0E, K4E, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, K1E, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K1D, K2E, \
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
K40, K41, K42, K46, K48, K49, K4A, K4B, K4C, K4D \
) { \
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, KC_NO, K0E }, \
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E }, \
{ K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
{ K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, K48, K49, K4A, K4B, K4C, K4D, K4E } \
}
#define LAYOUT_65_ansi_split_bs( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K4E, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, K1E, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K1D, K2E, \
K30, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
K40, K41, K42, K46, K48, K49, K4A, K4B, K4C, K4D \
) { \
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E }, \
{ K30, KC_NO, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
{ K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, K48, K49, K4A, K4B, K4C, K4D, K4E } \
}
#define LAYOUT_all( \
K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K4E, \
K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K2C, K1E, \
K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K1D, K2E, \
K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E, \
K40, K41, K42, K46, K48, K49, K4A, K4B, K4C, K4D \
) { \
{ K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E }, \
{ K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K1D, K1E }, \
{ K20, K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A, K2B, K2C, KC_NO, K2E }, \
{ K30, K31, K32, K33, K34, K35, K36, K37, K38, K39, K3A, K3B, K3C, K3D, K3E }, \
{ K40, K41, K42, KC_NO, KC_NO, KC_NO, K46, KC_NO, K48, K49, K4A, K4B, K4C, K4D, K4E } \
}