Update MEMO.txt
tmk
parent
e4b9541041
commit
17f22da3cf
|
|
@ -1,27 +1,35 @@
|
||||||
Roving RN-42
|
Roving RN-42
|
||||||
============
|
============
|
||||||
07/16 After fix of voltage dividor on GPIO6, had a trouble that it could not send a char to BT module, though could receive.
|
|
||||||
Found R8 had wrong 1K resistor and changed to 10K, after that it can send to the module again. Not sure how it had sent with the wrong 1K before.
|
|
||||||
07/18 On Linux, had an USB related trouble; keyobard or console didn't work for some reason. Changing PID cured this problem. Very annoying, took very long time before resolved it.
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
TODO
|
TODO
|
||||||
----
|
----
|
||||||
|
Power saving:
|
||||||
|
- When not connected in a few minuts get into deep sleep to save battery life
|
||||||
|
- CTS is needed for waking up from deep sleep? How deep sleep is activated?
|
||||||
|
|
||||||
|
Improving:
|
||||||
|
- Status LED; connecting, liked, low battery, sleeping, deep sleeping
|
||||||
|
- Battry voltage display by command; like full(solid), medium(blink), low(flash)
|
||||||
|
- move rn42 to protocol directory when it becomes reusable stack
|
||||||
- LUFA sendchar should be buffered and serial_uart.c buffur size is too large(256).
|
- LUFA sendchar should be buffered and serial_uart.c buffur size is too large(256).
|
||||||
- Factroy reset doesn't work; need to test again. 10K pull-up is too high?
|
|
||||||
- Lipo voltage ADC sensing
|
Testing:
|
||||||
- Lipo charger configuration: fast charge time: USB charger spec?
|
- Factroy reset doesn't work; need to **test again** 10K pull-up is too high?
|
||||||
- Low voltage alarm: LED indcates voltage of Lipo
|
- Lipo voltage ADC value is not stabilized
|
||||||
- CTS/RTS lines are needed? just connect in loop back if no flow control is needed.
|
- DCDC converter: squeaky inducter; try other inductors
|
||||||
- CTS is needed for waking up from deep sleep?
|
|
||||||
- Serial API callback when data are available/received(and when send buffer is available)
|
|
||||||
- Serial API instance several serial ports can be used
|
|
||||||
- DCDC converter: squeaky inducter with onsemi NCP1402
|
|
||||||
- Lipo charger MCP73831: needs capacitor 4.7uF *2
|
|
||||||
- Keymap layer bug: during space is pressed(mousekey) press Fn(HHKB) then release space before Fn, in result HHKB layer is locked(toggled) unintentionally.
|
- Keymap layer bug: during space is pressed(mousekey) press Fn(HHKB) then release space before Fn, in result HHKB layer is locked(toggled) unintentionally.
|
||||||
|
|
||||||
|
|
||||||
DONE:
|
DONE:
|
||||||
|
- Lipo charger configuration: fast charge time: USB charger spec? -- used 2kohm
|
||||||
|
- use LED of charger to alarm low battery. LED should be powered directly from Lipo? - cancel; powered from VUSB
|
||||||
|
- Use RTS in serial_uart.c to resolve missing chars from help message of RN-42 - done
|
||||||
|
- CTS/RTS lines are needed? just connect in loop back if no flow control is needed. - done
|
||||||
|
- add IO pin to charger status CHRG; LED control(low) and detect charge status(input HiZ) 07.24
|
||||||
|
- LINKED: add trace on PIO2 to PF6 07.24
|
||||||
|
- Lipo voltage ADC sensing
|
||||||
|
- Lipo charger MCP73831: needs capacitor 4.7uF *2
|
||||||
- USB connection check - 07.01
|
- USB connection check - 07.01
|
||||||
- BT on/off check: whether RX line is pulled up? - checking RTS 07.01
|
- BT on/off check: whether RX line is pulled up? - checking RTS 07.01
|
||||||
- USB/BT switching BT is on -> BT, BT is off -> USB - 07.01
|
- USB/BT switching BT is on -> BT, BT is off -> USB - 07.01
|
||||||
|
|
@ -30,8 +38,20 @@ DONE:
|
||||||
- Power selector doesn't work; Q4 MOSFET leaks from Lipo to USB power line. -- use Schottky instead 07/04
|
- Power selector doesn't work; Q4 MOSFET leaks from Lipo to USB power line. -- use Schottky instead 07/04
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
TROUBLE SHOOT
|
||||||
|
-------------
|
||||||
|
07/16 After fix of voltage dividor on GPIO6, had a trouble that it could not send a char to BT module, though could receive.
|
||||||
|
Found R8 had wrong 1K resistor and changed to 10K, after that it can send to the module again. Not sure how it had sent with the wrong 1K before.
|
||||||
|
|
||||||
|
07/18 On Linux, had an USB related trouble; keyobard or console didn't work for some reason. Changing PID cured this problem. Very annoying, took very long time before resolved it.
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
Lipo
|
Lipo
|
||||||
----
|
----
|
||||||
|
850mA lasts around 9 hours(07/28)
|
||||||
|
|
||||||
Sparkfun Polymer Lithium Ion Battery 850mAh:
|
Sparkfun Polymer Lithium Ion Battery 850mAh:
|
||||||
https://www.sparkfun.com/products/341
|
https://www.sparkfun.com/products/341
|
||||||
Lipo Cell spec:
|
Lipo Cell spec:
|
||||||
|
|
@ -46,6 +66,7 @@ over-discharge discover 3.022 3.100 3.178
|
||||||
|
|
||||||
ADC voltage monitor: voltage divider 10K+10K(0.5)
|
ADC voltage monitor: voltage divider 10K+10K(0.5)
|
||||||
ADC=V*0.5/2.56*1024
|
ADC=V*0.5/2.56*1024
|
||||||
|
|
||||||
V ADC
|
V ADC
|
||||||
------------------
|
------------------
|
||||||
4.20 0x347(839)
|
4.20 0x347(839)
|
||||||
|
|
@ -134,7 +155,9 @@ R,1 reboot
|
||||||
|
|
||||||
Apple iOS
|
Apple iOS
|
||||||
---------
|
---------
|
||||||
Cannot supported without apple iAP authentication chip.
|
Keyboard can be used with iPhone, but mouse cannot.
|
||||||
|
To operate iOS with keyboard is not so useful, though.
|
||||||
|
There may be iOS specific scancodes?
|
||||||
|
|
||||||
|
|
||||||
HID flag register
|
HID flag register
|
||||||
|
|
@ -158,6 +181,7 @@ GH
|
||||||
0100: Joystick
|
0100: Joystick
|
||||||
1xxx: reserved
|
1xxx: reserved
|
||||||
|
|
||||||
|
|
||||||
Out report - Indicator
|
Out report - Indicator
|
||||||
----------------------
|
----------------------
|
||||||
0xFE 0x02 0x01 <LED_state>
|
0xFE 0x02 0x01 <LED_state>
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue