Add support for YMD75 rev 2 (#8853)

master
Jared Hendry 2020-04-19 19:58:58 -04:00 committed by GitHub
parent 2d39a9dcdb
commit 1522d97c2b
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
14 changed files with 208 additions and 118 deletions

View File

@ -1,19 +1,19 @@
# YMD75 / MT84 # YMD75 / MT84
75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however the PCB has "MT84" printed on both sides. 75% keyboard from YMDK. YMDK sell the board and name it "YMD75", however revision 1 of the PCB has "MT84" printed on both sides.
* Keyboard Maintainer: [Wayne K Jones](github.com/WarmCatUK) * Keyboard Maintainer: [Wayne K Jones](github.com/WarmCatUK)
* Hardware Supported: YMD75/MT84 with the ATmega32a chip. * Hardware Supported: YMD75/MT84 (rev1 and rev2) with the ATmega32a chip.
* Hardware Availability: <https://www.aliexpress.com/item/32812690592.html> * Hardware Availability: <https://www.aliexpress.com/item/32812690592.html>
Make example for this keyboard (after setting up your build environment): Make example for this keyboard (after setting up your build environment):
make ymd75:default make ymd75/rev1:default
Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid)) Flashing example for this keyboard ([after setting up the bootloadHID flashing environment](https://docs.qmk.fm/#/flashing_bootloadhid))
make ymd75:default:flash make ymd75/rev1:default:flash
**Reset Key**: Hold down the key located at *Key below the top right key*, commonly programmed as *Backspace* while plugging in the keyboard. **Reset Key**: Hold down the key located at *Key below the top right key*, commonly programmed as *Backspace* while plugging in the keyboard. On PCB revision 2, enter the bootloader by holding `L_CTRL` while plugging in the keyboard.
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -24,16 +24,11 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define VENDOR_ID 0x20A0 #define VENDOR_ID 0x20A0
#define PRODUCT_ID 0x422D #define PRODUCT_ID 0x422D
#define DEVICE_VER 0x0200 #define DEVICE_VER 0x0200
#define MANUFACTURER YMDK #define MANUFACTURER YMDK
#define PRODUCT YMD75 / MT84 #define PRODUCT YMD75 / MT84
#define DESCRIPTION 75% Keyboard #define DESCRIPTION 75% Keyboard
/* matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 15
#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
#define DIODE_DIRECTION COL2ROW
#define BACKLIGHT_PIN D4 #define BACKLIGHT_PIN D4
#define BACKLIGHT_LEVELS 12 #define BACKLIGHT_LEVELS 12

View File

@ -82,12 +82,12 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) { if (record->event.pressed) {
switch(keycode) { switch(keycode) {
case P_MACRO: case P_MACRO:
SEND_STRING(SS_DOWN(X_LALT)); register_code(KC_LALT);
SEND_STRING(SS_TAP(X_KP_1)); tap_code(KC_KP_1);
SEND_STRING(SS_TAP(X_KP_5)); tap_code(KC_KP_5);
SEND_STRING(SS_TAP(X_KP_6)); tap_code(KC_KP_6);
SEND_STRING(SS_UP(X_LALT)); unregister_code(KC_LALT);
return false; break; return false;
} }
} }
return true; return true;

View File

@ -0,0 +1,27 @@
/*
Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
Modified 2017 Andrew Novak <ndrw.nvk@gmail.com>
Modified 2018 Wayne Jones (WarmCatUK) <waynekjones@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 15
#define MATRIX_ROW_PINS { B0, B1, B2, B3, B4, B5, B6, B7 }
#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
#define DIODE_DIRECTION COL2ROW

View File

@ -0,0 +1,34 @@
/*
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "ymd75.h"
void keyboard_pre_init_kb(void) {
led_init_ports();
keyboard_pre_init_user();
}
void led_init_ports(void) {
setPinOutput(D1);
}
bool led_update_kb(led_t led_state) {
if (led_update_user(led_state)) {
writePin(D1, led_state.caps_lock);
}
return true;
}

View File

@ -0,0 +1,39 @@
/*
Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
Modified 2017 Andrew Novak <ndrw.nvk@gmail.com>
Modified 2018 Wayne Jones (WarmCatUK) <waynekjones@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
#define LAYOUT( \
K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, \
K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, KD0, \
K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3, K67, \
K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KD2, KE0, \
K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, K86, K77, \
K00, K10, K20, K56, K57, KB0, KC0, K96, K76, K66 \
){ \
{ K00, K10, K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB0, KC0, KD0, KC_NO }, \
{ K01, K11, K21, K31, K41, K51, KC_NO, KC_NO, KC_NO, KC_NO, KA1, KB1, KC_NO, KD1, KE1 }, \
{ K02, K12, K22, K32, K42, K52, KC_NO, KC_NO, KC_NO, KC_NO, KA2, KB2, KC_NO, KD2, KE2 }, \
{ K03, K13, K23, K33, K43, K53, KC_NO, KC_NO, KC_NO, KC_NO, KA3, KB3, KC3, KD3, KC_NO }, \
{ K04, K14, K24, K34, K44, K54, KC_NO, KC_NO, KC_NO, KC_NO, KA4, KB4, KC4, KC_NO, KE4 }, \
{ K05, KC_NO, K25, K35, K45, K55, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB5, KC5, KD5, KE5 }, \
{ K06, K16, K26, K36, K46, K56, K66, K76, K86, K96, KA6, KB6, KC6, KD6, KE6 }, \
{ K07, K17, K27, K37, K47, K57, K67, K77, KE0, KC_NO, KA7, KB7, KC7, KD7, KE7 } \
}

View File

@ -0,0 +1,15 @@
# build options
BOOTMAGIC_ENABLE = yes
MOUSEKEY_ENABLE = no
EXTRAKEY_ENABLE = yes
CONSOLE_ENABLE = no
COMMAND_ENABLE = yes
BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = i2c
NKRO_ENABLE = no
# Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
KEY_LOCK_ENABLE = yes
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

View File

@ -0,0 +1,8 @@
#pragma once
/* matrix size */
#define MATRIX_ROWS 6
#define MATRIX_COLS 15
#define MATRIX_ROW_PINS { B7, B6, B5, B4, B3, B0 }
#define MATRIX_COL_PINS { A0, A1, A2, A3, A4, A5, A6, A7, C7, C6, C5, C4, C3, C2, D7 }
#define DIODE_DIRECTION COL2ROW

View File

@ -0,0 +1,34 @@
/*
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "ymd75.h"
void keyboard_pre_init_kb(void) {
led_init_ports();
keyboard_pre_init_user();
}
void led_init_ports(void) {
setPinOutput(D1);
}
bool led_update_kb(led_t led_state) {
if (led_update_user(led_state)) {
writePin(D1, led_state.caps_lock);
}
return true;
}

View File

@ -0,0 +1,18 @@
#pragma once
#include "quantum.h"
#define LAYOUT( \
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014, K514, \
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, K114, K513, \
K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214, \
K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K313, K314, \
K400, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414, \
K500, K501, K502, K505, K506, K507, K508, K509, K510, K511 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, K011, K012, K013, K014 }, \
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, K111, K112, KC_NO, K114 }, \
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, K212, K213, K214 }, \
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, KC_NO, K313, K314 }, \
{ K400, KC_NO, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, K413, K414 }, \
{ K500, K501, K502, KC_NO, KC_NO, K505, K506, K507, K508, K509, K510, K511, KC_NO, K513, K514 } \
}

View File

@ -0,0 +1,15 @@
# build options
BOOTMAGIC_ENABLE = yes
MOUSEKEY_ENABLE = no
EXTRAKEY_ENABLE = yes
CONSOLE_ENABLE = no
COMMAND_ENABLE = yes
BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = i2c
NKRO_ENABLE = no
# Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
KEY_LOCK_ENABLE = yes
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

View File

@ -11,20 +11,4 @@ MCU = atmega32a
# ATmega328P USBasp # ATmega328P USBasp
BOOTLOADER = bootloadHID BOOTLOADER = bootloadHID
# build options DEFAULT_FOLDER = ymd75/rev1
BOOTMAGIC_ENABLE = yes
MOUSEKEY_ENABLE = no
EXTRAKEY_ENABLE = yes
CONSOLE_ENABLE = no
COMMAND_ENABLE = yes
BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = i2c
NKRO_ENABLE = no
# Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
DISABLE_WS2812 = no
KEY_LOCK_ENABLE = yes
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

View File

@ -1,34 +1 @@
/*
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "ymd75.h" #include "ymd75.h"
void keyboard_pre_init_kb(void) {
led_init_ports();
keyboard_pre_init_user();
}
void led_init_ports(void) {
setPinOutput(D1);
}
bool led_update_kb(led_t led_state) {
if (led_update_user(led_state)) {
writePin(D1, led_state.caps_lock);
}
return true;
}

View File

@ -1,55 +1,9 @@
/* #pragma once
Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
Modified 2017 Andrew Novak <ndrw.nvk@gmail.com>
Modified 2018 Wayne Jones (WarmCatUK) <waynekjones@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef KEYMAP_COMMON_H
#define KEYMAP_COMMON_H
#include "quantum.h" #include "quantum.h"
#include "quantum_keycodes.h"
#include "keycode.h"
#include "action.h"
#define LAYOUT( \
K05, K25, K35, K45, K55, K06, KA6, KA7, K07, KB5, KC5, KD5, KE5, KD1, KE1, KE2, \
K04, K14, K24, K34, K44, K54, K16, KB6, KB7, K17, KA4, KB4, KC4, KE4, KD0, \
K03, K13, K23, K33, K43, K53, K26, KC6, KC7, K27, KA3, KB3, KC3, KD3, K67, \
K02, K12, K22, K32, K42, K52, K36, KD6, KD7, K37, KA2, KB2, KD2, KE0, \
K01, K11, K21, K31, K41, K51, K46, KE6, KE7, K47, KA1, KB1, K86, K77, \
K00, K10, K20, K56, K57, KB0, KC0, K96, K76, K66 \
){ \
{ K00, K10, K20, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB0, KC0, KD0, KC_NO }, \
{ K01, K11, K21, K31, K41, K51, KC_NO, KC_NO, KC_NO, KC_NO, KA1, KB1, KC_NO, KD1, KE1 }, \
{ K02, K12, K22, K32, K42, K52, KC_NO, KC_NO, KC_NO, KC_NO, KA2, KB2, KC_NO, KD2, KE2 }, \
{ K03, K13, K23, K33, K43, K53, KC_NO, KC_NO, KC_NO, KC_NO, KA3, KB3, KC3, KD3, KC_NO }, \
{ K04, K14, K24, K34, K44, K54, KC_NO, KC_NO, KC_NO, KC_NO, KA4, KB4, KC4, KC_NO, KE4 }, \
{ K05, KC_NO, K25, K35, K45, K55, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KB5, KC5, KD5, KE5 }, \
{ K06, K16, K26, K36, K46, K56, K66, K76, K86, K96, KA6, KB6, KC6, KD6, KE6 }, \
{ K07, K17, K27, K37, K47, K57, K67, K77, KE0, KC_NO, KA7, KB7, KC7, KD7, KE7 } \
}
#if defined(KEYBOARD_ymd75_rev1)
#include "rev1.h"
#elif defined(KEYBOARD_ymd75_rev2)
#include "rev2.h"
#endif #endif