andrejl
/
qmk-dactyl-manuform-a
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

Make solo half of split keyboards (more) usable. (#13523) 

* Make solo half of split keyboards (more) usable.

Using only one half of a split keyboard (that's using the split_common
framework to communicate) is not a great experience, since several read
timeouts per scan cycle cause an unusably slow scan rate.

This change blocks all split communication attempts for 500 ms
(configurable) after an error occurs, causing the scan rate to become at
least _more_ usable, but might need some tweaking to work fully on most
keyboards. One read timeout still needs to occur after the 500 ms has
passed, and if that timeout isn't low enough, some scan cycles may still
be too slow.

* Fix lint complaint.

* Require 25 consecutive comm errors to see comms as disconnected.

The number of max errors can be overridden by defining
`SPLIT_MAX_CONNECTION_ERRORS`.

* Add comments to new defines, and ability to disable disconnection check.

Also increase `SPLIT_MAX_CONNECTION_ERRORS` to 40, since it's divisible
by most relevant numbers for the description.

* Make lint happy ...again

* Only update `connection_check_timer` when needed.

* Add new defines to split keyboard documentation.

* Move connection timeout logic to transport.c, add `is_transport_connected`.

* Use split_common disconnection logic in matrix.c.

Instead of doing more or less the same thing twice.

* Move disconnection logic to `transport_master`.

Is a cleaner implementation, and causes the scan rate while disconnected
to increase instead of decrease.

* Lint fixes.

* Lower default `SERIAL_USART_TIMEOUT` to 20 ms.

The read timeout must be low enough to not cause exessively long scan
cycles when using a solo split half. 10 ms was determined from testing
to work fine even with the slowest defined baudrate of 19200 (5 ms was
too low for that case), so 20 ms should be fine for most cases.

* Remove `SERIAL_USART_TIMEOUT` from ergodox_infinity/config.h

Was somewhat mistakenly included in an earlier PR.

* Fix building with `USE_I2C`.

* Reduce built firmware size.

Not really sure why this works, the idea was taken from tzarc's work on
split disconnection.

* Tweak and improve opt-out for split disconnection logic.

There are now two ways to opt out from this feature:
* Set `SPLIT_MAX_CONNECTION_ERRORS` to 0. This will completely disable
  the connection status checks (also affects the slave matrix reset logic in
  matrix.c, though).
* Set `SPLIT_CONNECTION_CHECK_TIMEOUT` to 0. This will only disable the
  communication throttling while disconnected. Will make the firmware
  smaller.

* Make split disconnection logic work with custom transports.

Includes a fallback implementation for keyboards using a custom
split_util.c but not a custom matrix.c (currently no such keyboard seems
to be merged, though).

* Remove unnecessary include of timer.h

Co-authored-by: Joel Challis <git@zvecr.com>

Co-authored-by: Joel Challis <git@zvecr.com>
master
Joakim Tufvegren 2021-08-22 02:51:17 +02:00 committed by GitHub
parent c5f41d42d8
commit 0ae20e7457
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
9 changed files with 143 additions and 78 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
docs/feature_split_keyboard.md
View File

@ -203,6 +203,22 @@ If you're having issues with serial communication, you can change this value, as
This sets the maximum number of milliseconds before forcing a synchronization of data from master to slave. Under normal circumstances this sync occurs whenever the data _changes_, for safety a data transfer occurs after this number of milliseconds if no change has been detected since the last sync. This sets the maximum number of milliseconds before forcing a synchronization of data from master to slave. Under normal circumstances this sync occurs whenever the data _changes_, for safety a data transfer occurs after this number of milliseconds if no change has been detected since the last sync.
```c
#define SPLIT_MAX_CONNECTION_ERRORS 10
```
This sets the maximum number of failed communication attempts (one per scan cycle) from the master part before it assumes that no slave part is connected. This makes it possible to use a master part without the slave part connected.
Set to 0 to disable the disconnection check altogether.
```c
#define SPLIT_CONNECTION_CHECK_TIMEOUT 500
```
How long (in milliseconds) the master part should block all connection attempts to the slave after the communication has been flagged as disconnected (see `SPLIT_MAX_CONNECTION_ERRORS` above).
One communication attempt will be allowed everytime this amount of time has passed since the last attempt. If that attempt succeeds, the communication is seen as working again.
Set to 0 to disable this throttling of communications while disconnected. This can save you a couple of bytes of firmware size.
```c ```c
#define SPLIT_TRANSPORT_MIRROR #define SPLIT_TRANSPORT_MIRROR
``` ```

6
docs/serial_driver.md
View File

@ -63,7 +63,7 @@ Configure the hardware via your config.h:
// 5: about 19200 baud // 5: about 19200 baud
#define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1 #define SERIAL_USART_DRIVER SD1 // USART driver of TX pin. default: SD1
#define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 #define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
#define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100 #define SERIAL_USART_TIMEOUT 20 // USART driver timeout. default 20
``` ```
You must also enable the ChibiOS `SERIAL` feature: You must also enable the ChibiOS `SERIAL` feature:
@ -105,10 +105,10 @@ Next configure the hardware via your config.h:
// 3: 57600 baud // 3: 57600 baud
// 4: 38400 baud // 4: 38400 baud
// 5: 19200 baud // 5: 19200 baud
#define SERIAL_USART_DRIVER SD1 // USART driver of TX and RX pin. default: SD1 #define SERIAL_USART_DRIVER SD1 // USART driver of TX and RX pin. default: SD1
#define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 #define SERIAL_USART_TX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
#define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7 #define SERIAL_USART_RX_PAL_MODE 7 // Pin "alternate function", see the respective datasheet for the appropriate values for your MCU. default: 7
#define SERIAL_USART_TIMEOUT 100 // USART driver timeout. default 100 #define SERIAL_USART_TIMEOUT 20 // USART driver timeout. default 20
``` ```
You must also enable the ChibiOS `SERIAL` feature: You must also enable the ChibiOS `SERIAL` feature:

1
keyboards/ergodox_infinity/config.h
View File

@ -67,7 +67,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define SERIAL_USART_DRIVER SD1 // Only true for the master half #define SERIAL_USART_DRIVER SD1 // Only true for the master half
#define SERIAL_USART_CONFIG { (SERIAL_USART_SPEED), } // Only field is speed #define SERIAL_USART_CONFIG { (SERIAL_USART_SPEED), } // Only field is speed
#define SERIAL_USART_FULL_DUPLEX #define SERIAL_USART_FULL_DUPLEX
#define SERIAL_USART_TIMEOUT 50
/* number of backlight levels */ /* number of backlight levels */
#define BACKLIGHT_LEVELS 3 #define BACKLIGHT_LEVELS 3

2
platforms/chibios/drivers/serial_usart.h
View File

@ -110,7 +110,7 @@
#endif #endif
#if !defined(SERIAL_USART_TIMEOUT) #if !defined(SERIAL_USART_TIMEOUT)
# define SERIAL_USART_TIMEOUT 100 # define SERIAL_USART_TIMEOUT 20
#endif #endif
#define HANDSHAKE_MAGIC 7 #define HANDSHAKE_MAGIC 7

36
quantum/matrix.c
View File

@ -25,10 +25,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
# include "split_common/split_util.h" # include "split_common/split_util.h"
# include "split_common/transactions.h" # include "split_common/transactions.h"
# ifndef ERROR_DISCONNECT_COUNT
# define ERROR_DISCONNECT_COUNT 5
# endif // ERROR_DISCONNECT_COUNT
# define ROWS_PER_HAND (MATRIX_ROWS / 2) # define ROWS_PER_HAND (MATRIX_ROWS / 2)
#else #else
# define ROWS_PER_HAND (MATRIX_ROWS) # define ROWS_PER_HAND (MATRIX_ROWS)
@ -307,33 +303,31 @@ void matrix_init(void) {
} }
#ifdef SPLIT_KEYBOARD #ifdef SPLIT_KEYBOARD
// Fallback implementation for keyboards not using the standard split_util.c
__attribute__((weak)) bool transport_master_if_connected(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) {
transport_master(master_matrix, slave_matrix);
return true; // Treat the transport as always connected
}
bool matrix_post_scan(void) { bool matrix_post_scan(void) {
bool changed = false; bool changed = false;
if (is_keyboard_master()) { if (is_keyboard_master()) {
static uint8_t error_count;
matrix_row_t slave_matrix[ROWS_PER_HAND] = {0}; matrix_row_t slave_matrix[ROWS_PER_HAND] = {0};
if (!transport_master(matrix + thisHand, slave_matrix)) { if (transport_master_if_connected(matrix + thisHand, slave_matrix)) {
error_count++;
if (error_count > ERROR_DISCONNECT_COUNT) {
// reset other half if disconnected
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[thatHand + i] = 0;
slave_matrix[i] = 0;
}
changed = true;
}
} else {
error_count = 0;
for (int i = 0; i < ROWS_PER_HAND; ++i) { for (int i = 0; i < ROWS_PER_HAND; ++i) {
if (matrix[thatHand + i] != slave_matrix[i]) { if (matrix[thatHand + i] != slave_matrix[i]) {
matrix[thatHand + i] = slave_matrix[i]; matrix[thatHand + i] = slave_matrix[i];
changed = true; changed = true;
} }
} }
} else {
// reset other half if disconnected
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[thatHand + i] = 0;
slave_matrix[i] = 0;
}
changed = true;
} }
matrix_scan_quantum(); matrix_scan_quantum();

51
quantum/split_common/split_util.c
View File

@ -39,6 +39,21 @@
# define SPLIT_USB_TIMEOUT_POLL 10 # define SPLIT_USB_TIMEOUT_POLL 10
#endif #endif
// Max number of consecutive failed communications (one per scan cycle) before the communication is seen as disconnected.
// Set to 0 to disable the disconnection check altogether.
#ifndef SPLIT_MAX_CONNECTION_ERRORS
# define SPLIT_MAX_CONNECTION_ERRORS 10
#endif // SPLIT_MAX_CONNECTION_ERRORS
// How long (in milliseconds) to block all connection attempts after the communication has been flagged as disconnected.
// One communication attempt will be allowed everytime this amount of time has passed since the last attempt. If that attempt succeeds, the communication is seen as working again.
// Set to 0 to disable communication throttling while disconnected
#ifndef SPLIT_CONNECTION_CHECK_TIMEOUT
# define SPLIT_CONNECTION_CHECK_TIMEOUT 500
#endif // SPLIT_CONNECTION_CHECK_TIMEOUT
static uint8_t connection_errors = 0;
volatile bool isLeftHand = true; volatile bool isLeftHand = true;
#if defined(SPLIT_USB_DETECT) #if defined(SPLIT_USB_DETECT)
@ -142,3 +157,39 @@ void split_post_init(void) {
transport_slave_init(); transport_slave_init();
} }
} }
bool is_transport_connected(void) { return connection_errors < SPLIT_MAX_CONNECTION_ERRORS; }
bool transport_master_if_connected(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) {
#if SPLIT_MAX_CONNECTION_ERRORS > 0 && SPLIT_CONNECTION_CHECK_TIMEOUT > 0
// Throttle transaction attempts if target doesn't seem to be connected
// Without this, a solo half becomes unusable due to constant read timeouts
static uint16_t connection_check_timer = 0;
const bool is_disconnected = !is_transport_connected();
if (is_disconnected && timer_elapsed(connection_check_timer) < SPLIT_CONNECTION_CHECK_TIMEOUT) {
return false;
}
#endif // SPLIT_MAX_CONNECTION_ERRORS > 0 && SPLIT_CONNECTION_CHECK_TIMEOUT > 0
__attribute__((unused)) bool okay = transport_master(master_matrix, slave_matrix);
#if SPLIT_MAX_CONNECTION_ERRORS > 0
if (!okay) {
if (connection_errors < UINT8_MAX) {
connection_errors++;
}
# if SPLIT_CONNECTION_CHECK_TIMEOUT > 0
bool connected = is_transport_connected();
if (!connected) {
connection_check_timer = timer_read();
dprintln("Target disconnected, throttling connection attempts");
}
return connected;
} else if (is_disconnected) {
dprintln("Target connected");
# endif // SPLIT_CONNECTION_CHECK_TIMEOUT > 0
}
connection_errors = 0;
#endif // SPLIT_MAX_CONNECTION_ERRORS > 0
return true;
}

5
quantum/split_common/split_util.h
View File

@ -5,8 +5,13 @@
#include <stdio.h> #include <stdio.h>
#include <stdlib.h> #include <stdlib.h>
#include "matrix.h"
extern volatile bool isLeftHand; extern volatile bool isLeftHand;
void matrix_master_OLED_init(void); void matrix_master_OLED_init(void);
void split_pre_init(void); void split_pre_init(void);
void split_post_init(void); void split_post_init(void);
bool transport_master_if_connected(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]);
bool is_transport_connected(void);

102
quantum/split_common/transactions.c
View File

@ -23,6 +23,7 @@
#include "quantum.h" #include "quantum.h"
#include "transactions.h" #include "transactions.h"
#include "transport.h" #include "transport.h"
#include "split_util.h"
#include "transaction_id_define.h" #include "transaction_id_define.h"
#define SYNC_TIMER_OFFSET 2 #define SYNC_TIMER_OFFSET 2
@ -53,34 +54,30 @@ void slave_rpc_exec_callback(uint8_t initiator2target_buffer_size, const void *i
//////////////////////////////////////////////////// ////////////////////////////////////////////////////
// Helpers // Helpers
bool transaction_handler_master(bool okay, matrix_row_t master_matrix[], matrix_row_t slave_matrix[], const char *prefix, bool (*handler)(matrix_row_t master_matrix[], matrix_row_t slave_matrix[])) { static bool transaction_handler_master(matrix_row_t master_matrix[], matrix_row_t slave_matrix[], const char *prefix, bool (*handler)(matrix_row_t master_matrix[], matrix_row_t slave_matrix[])) {
if (okay) { int num_retries = is_transport_connected() ? 10 : 1;
bool this_okay = true; for (int iter = 1; iter <= num_retries; ++iter) {
for (int iter = 1; iter <= 10; ++iter) { if (iter > 1) {
if (!this_okay) { for (int i = 0; i < iter * iter; ++i) {
for (int i = 0; i < iter * iter; ++i) { wait_us(10);
wait_us(10);
}
} }
ATOMIC_BLOCK_FORCEON { this_okay = handler(master_matrix, slave_matrix); };
if (this_okay) break;
}
okay &= this_okay;
if (!okay) {
dprintf("Failed to execute %s\n", prefix);
} }
bool this_okay = true;
ATOMIC_BLOCK_FORCEON { this_okay = handler(master_matrix, slave_matrix); };
if (this_okay) return true;
} }
return okay; dprintf("Failed to execute %s\n", prefix);
return false;
} }
#define TRANSACTION_HANDLER_MASTER(prefix) \ #define TRANSACTION_HANDLER_MASTER(prefix) \
do { \ do { \
okay &= transaction_handler_master(okay, master_matrix, slave_matrix, #prefix, &prefix##_master); \ if (!transaction_handler_master(master_matrix, slave_matrix, #prefix, &prefix##_handlers_master)) return false; \
} while (0) } while (0)
#define TRANSACTION_HANDLER_SLAVE(prefix) \ #define TRANSACTION_HANDLER_SLAVE(prefix) \
do { \ do { \
ATOMIC_BLOCK_FORCEON { prefix##_slave(master_matrix, slave_matrix); }; \ ATOMIC_BLOCK_FORCEON { prefix##_handlers_slave(master_matrix, slave_matrix); }; \
} while (0) } while (0)
inline static bool read_if_checksum_mismatch(int8_t trans_id_checksum, int8_t trans_id_retrieve, uint32_t *last_update, void *destination, const void *equiv_shmem, size_t length) { inline static bool read_if_checksum_mismatch(int8_t trans_id_checksum, int8_t trans_id_retrieve, uint32_t *last_update, void *destination, const void *equiv_shmem, size_t length) {
@ -138,8 +135,8 @@ static void slave_matrix_handlers_slave(matrix_row_t master_matrix[], matrix_row
} }
// clang-format off // clang-format off
#define TRANSACTIONS_SLAVE_MATRIX_MASTER() TRANSACTION_HANDLER_MASTER(slave_matrix_handlers) #define TRANSACTIONS_SLAVE_MATRIX_MASTER() TRANSACTION_HANDLER_MASTER(slave_matrix)
#define TRANSACTIONS_SLAVE_MATRIX_SLAVE() TRANSACTION_HANDLER_SLAVE(slave_matrix_handlers) #define TRANSACTIONS_SLAVE_MATRIX_SLAVE() TRANSACTION_HANDLER_SLAVE(slave_matrix)
#define TRANSACTIONS_SLAVE_MATRIX_REGISTRATIONS \ #define TRANSACTIONS_SLAVE_MATRIX_REGISTRATIONS \
[GET_SLAVE_MATRIX_CHECKSUM] = trans_target2initiator_initializer(smatrix.checksum), \ [GET_SLAVE_MATRIX_CHECKSUM] = trans_target2initiator_initializer(smatrix.checksum), \
[GET_SLAVE_MATRIX_DATA] = trans_target2initiator_initializer(smatrix.matrix), [GET_SLAVE_MATRIX_DATA] = trans_target2initiator_initializer(smatrix.matrix),
@ -160,8 +157,8 @@ static void master_matrix_handlers_slave(matrix_row_t master_matrix[], matrix_ro
memcpy(master_matrix, split_shmem->mmatrix.matrix, sizeof(split_shmem->mmatrix.matrix)); memcpy(master_matrix, split_shmem->mmatrix.matrix, sizeof(split_shmem->mmatrix.matrix));
} }
# define TRANSACTIONS_MASTER_MATRIX_MASTER() TRANSACTION_HANDLER_MASTER(master_matrix_handlers) # define TRANSACTIONS_MASTER_MATRIX_MASTER() TRANSACTION_HANDLER_MASTER(master_matrix)
# define TRANSACTIONS_MASTER_MATRIX_SLAVE() TRANSACTION_HANDLER_SLAVE(master_matrix_handlers) # define TRANSACTIONS_MASTER_MATRIX_SLAVE() TRANSACTION_HANDLER_SLAVE(master_matrix)
# define TRANSACTIONS_MASTER_MATRIX_REGISTRATIONS [PUT_MASTER_MATRIX] = trans_initiator2target_initializer(mmatrix.matrix), # define TRANSACTIONS_MASTER_MATRIX_REGISTRATIONS [PUT_MASTER_MATRIX] = trans_initiator2target_initializer(mmatrix.matrix),
#else // SPLIT_TRANSPORT_MIRROR #else // SPLIT_TRANSPORT_MIRROR
@ -196,8 +193,8 @@ static void encoder_handlers_slave(matrix_row_t master_matrix[], matrix_row_t sl
} }
// clang-format off // clang-format off
# define TRANSACTIONS_ENCODERS_MASTER() TRANSACTION_HANDLER_MASTER(encoder_handlers) # define TRANSACTIONS_ENCODERS_MASTER() TRANSACTION_HANDLER_MASTER(encoder)
# define TRANSACTIONS_ENCODERS_SLAVE() TRANSACTION_HANDLER_SLAVE(encoder_handlers) # define TRANSACTIONS_ENCODERS_SLAVE() TRANSACTION_HANDLER_SLAVE(encoder)
# define TRANSACTIONS_ENCODERS_REGISTRATIONS \ # define TRANSACTIONS_ENCODERS_REGISTRATIONS \
[GET_ENCODERS_CHECKSUM] = trans_target2initiator_initializer(encoders.checksum), \ [GET_ENCODERS_CHECKSUM] = trans_target2initiator_initializer(encoders.checksum), \
[GET_ENCODERS_DATA] = trans_target2initiator_initializer(encoders.state), [GET_ENCODERS_DATA] = trans_target2initiator_initializer(encoders.state),
@ -238,8 +235,8 @@ static void sync_timer_handlers_slave(matrix_row_t master_matrix[], matrix_row_t
} }
} }
# define TRANSACTIONS_SYNC_TIMER_MASTER() TRANSACTION_HANDLER_MASTER(sync_timer_handlers) # define TRANSACTIONS_SYNC_TIMER_MASTER() TRANSACTION_HANDLER_MASTER(sync_timer)
# define TRANSACTIONS_SYNC_TIMER_SLAVE() TRANSACTION_HANDLER_SLAVE(sync_timer_handlers) # define TRANSACTIONS_SYNC_TIMER_SLAVE() TRANSACTION_HANDLER_SLAVE(sync_timer)
# define TRANSACTIONS_SYNC_TIMER_REGISTRATIONS [PUT_SYNC_TIMER] = trans_initiator2target_initializer(sync_timer), # define TRANSACTIONS_SYNC_TIMER_REGISTRATIONS [PUT_SYNC_TIMER] = trans_initiator2target_initializer(sync_timer),
#else // DISABLE_SYNC_TIMER #else // DISABLE_SYNC_TIMER
@ -272,8 +269,8 @@ static void layer_state_handlers_slave(matrix_row_t master_matrix[], matrix_row_
} }
// clang-format off // clang-format off
# define TRANSACTIONS_LAYER_STATE_MASTER() TRANSACTION_HANDLER_MASTER(layer_state_handlers) # define TRANSACTIONS_LAYER_STATE_MASTER() TRANSACTION_HANDLER_MASTER(layer_state)
# define TRANSACTIONS_LAYER_STATE_SLAVE() TRANSACTION_HANDLER_SLAVE(layer_state_handlers) # define TRANSACTIONS_LAYER_STATE_SLAVE() TRANSACTION_HANDLER_SLAVE(layer_state)
# define TRANSACTIONS_LAYER_STATE_REGISTRATIONS \ # define TRANSACTIONS_LAYER_STATE_REGISTRATIONS \
[PUT_LAYER_STATE] = trans_initiator2target_initializer(layers.layer_state), \ [PUT_LAYER_STATE] = trans_initiator2target_initializer(layers.layer_state), \
[PUT_DEFAULT_LAYER_STATE] = trans_initiator2target_initializer(layers.default_layer_state), [PUT_DEFAULT_LAYER_STATE] = trans_initiator2target_initializer(layers.default_layer_state),
@ -303,8 +300,8 @@ static void led_state_handlers_slave(matrix_row_t master_matrix[], matrix_row_t
set_split_host_keyboard_leds(split_shmem->led_state); set_split_host_keyboard_leds(split_shmem->led_state);
} }
# define TRANSACTIONS_LED_STATE_MASTER() TRANSACTION_HANDLER_MASTER(led_state_handlers) # define TRANSACTIONS_LED_STATE_MASTER() TRANSACTION_HANDLER_MASTER(led_state)
# define TRANSACTIONS_LED_STATE_SLAVE() TRANSACTION_HANDLER_SLAVE(led_state_handlers) # define TRANSACTIONS_LED_STATE_SLAVE() TRANSACTION_HANDLER_SLAVE(led_state)
# define TRANSACTIONS_LED_STATE_REGISTRATIONS [PUT_LED_STATE] = trans_initiator2target_initializer(led_state), # define TRANSACTIONS_LED_STATE_REGISTRATIONS [PUT_LED_STATE] = trans_initiator2target_initializer(led_state),
#else // SPLIT_LED_STATE_ENABLE #else // SPLIT_LED_STATE_ENABLE
@ -360,8 +357,8 @@ static void mods_handlers_slave(matrix_row_t master_matrix[], matrix_row_t slave
# endif # endif
} }
# define TRANSACTIONS_MODS_MASTER() TRANSACTION_HANDLER_MASTER(mods_handlers) # define TRANSACTIONS_MODS_MASTER() TRANSACTION_HANDLER_MASTER(mods)
# define TRANSACTIONS_MODS_SLAVE() TRANSACTION_HANDLER_SLAVE(mods_handlers) # define TRANSACTIONS_MODS_SLAVE() TRANSACTION_HANDLER_SLAVE(mods)
# define TRANSACTIONS_MODS_REGISTRATIONS [PUT_MODS] = trans_initiator2target_initializer(mods), # define TRANSACTIONS_MODS_REGISTRATIONS [PUT_MODS] = trans_initiator2target_initializer(mods),
#else // SPLIT_MODS_ENABLE #else // SPLIT_MODS_ENABLE
@ -385,8 +382,8 @@ static bool backlight_handlers_master(matrix_row_t master_matrix[], matrix_row_t
static void backlight_handlers_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) { backlight_set(split_shmem->backlight_level); } static void backlight_handlers_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) { backlight_set(split_shmem->backlight_level); }
# define TRANSACTIONS_BACKLIGHT_MASTER() TRANSACTION_HANDLER_MASTER(backlight_handlers) # define TRANSACTIONS_BACKLIGHT_MASTER() TRANSACTION_HANDLER_MASTER(backlight)
# define TRANSACTIONS_BACKLIGHT_SLAVE() TRANSACTION_HANDLER_SLAVE(backlight_handlers) # define TRANSACTIONS_BACKLIGHT_SLAVE() TRANSACTION_HANDLER_SLAVE(backlight)
# define TRANSACTIONS_BACKLIGHT_REGISTRATIONS [PUT_BACKLIGHT] = trans_initiator2target_initializer(backlight_level), # define TRANSACTIONS_BACKLIGHT_REGISTRATIONS [PUT_BACKLIGHT] = trans_initiator2target_initializer(backlight_level),
#else // BACKLIGHT_ENABLE #else // BACKLIGHT_ENABLE
@ -422,8 +419,8 @@ static void rgblight_handlers_slave(matrix_row_t master_matrix[], matrix_row_t s
} }
} }
# define TRANSACTIONS_RGBLIGHT_MASTER() TRANSACTION_HANDLER_MASTER(rgblight_handlers) # define TRANSACTIONS_RGBLIGHT_MASTER() TRANSACTION_HANDLER_MASTER(rgblight)
# define TRANSACTIONS_RGBLIGHT_SLAVE() TRANSACTION_HANDLER_SLAVE(rgblight_handlers) # define TRANSACTIONS_RGBLIGHT_SLAVE() TRANSACTION_HANDLER_SLAVE(rgblight)
# define TRANSACTIONS_RGBLIGHT_REGISTRATIONS [PUT_RGBLIGHT] = trans_initiator2target_initializer(rgblight_sync), # define TRANSACTIONS_RGBLIGHT_REGISTRATIONS [PUT_RGBLIGHT] = trans_initiator2target_initializer(rgblight_sync),
#else // defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT) #else // defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
@ -452,8 +449,8 @@ static void led_matrix_handlers_slave(matrix_row_t master_matrix[], matrix_row_t
led_matrix_set_suspend_state(split_shmem->led_matrix_sync.led_suspend_state); led_matrix_set_suspend_state(split_shmem->led_matrix_sync.led_suspend_state);
} }
# define TRANSACTIONS_LED_MATRIX_MASTER() TRANSACTION_HANDLER_MASTER(led_matrix_handlers) # define TRANSACTIONS_LED_MATRIX_MASTER() TRANSACTION_HANDLER_MASTER(led_matrix)
# define TRANSACTIONS_LED_MATRIX_SLAVE() TRANSACTION_HANDLER_SLAVE(led_matrix_handlers) # define TRANSACTIONS_LED_MATRIX_SLAVE() TRANSACTION_HANDLER_SLAVE(led_matrix)
# define TRANSACTIONS_LED_MATRIX_REGISTRATIONS [PUT_LED_MATRIX] = trans_initiator2target_initializer(led_matrix_sync), # define TRANSACTIONS_LED_MATRIX_REGISTRATIONS [PUT_LED_MATRIX] = trans_initiator2target_initializer(led_matrix_sync),
#else // defined(LED_MATRIX_ENABLE) && defined(LED_MATRIX_SPLIT) #else // defined(LED_MATRIX_ENABLE) && defined(LED_MATRIX_SPLIT)
@ -482,8 +479,8 @@ static void rgb_matrix_handlers_slave(matrix_row_t master_matrix[], matrix_row_t
rgb_matrix_set_suspend_state(split_shmem->rgb_matrix_sync.rgb_suspend_state); rgb_matrix_set_suspend_state(split_shmem->rgb_matrix_sync.rgb_suspend_state);
} }
# define TRANSACTIONS_RGB_MATRIX_MASTER() TRANSACTION_HANDLER_MASTER(rgb_matrix_handlers) # define TRANSACTIONS_RGB_MATRIX_MASTER() TRANSACTION_HANDLER_MASTER(rgb_matrix)
# define TRANSACTIONS_RGB_MATRIX_SLAVE() TRANSACTION_HANDLER_SLAVE(rgb_matrix_handlers) # define TRANSACTIONS_RGB_MATRIX_SLAVE() TRANSACTION_HANDLER_SLAVE(rgb_matrix)
# define TRANSACTIONS_RGB_MATRIX_REGISTRATIONS [PUT_RGB_MATRIX] = trans_initiator2target_initializer(rgb_matrix_sync), # define TRANSACTIONS_RGB_MATRIX_REGISTRATIONS [PUT_RGB_MATRIX] = trans_initiator2target_initializer(rgb_matrix_sync),
#else // defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_SPLIT) #else // defined(RGB_MATRIX_ENABLE) && defined(RGB_MATRIX_SPLIT)
@ -507,8 +504,8 @@ static bool wpm_handlers_master(matrix_row_t master_matrix[], matrix_row_t slave
static void wpm_handlers_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) { set_current_wpm(split_shmem->current_wpm); } static void wpm_handlers_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) { set_current_wpm(split_shmem->current_wpm); }
# define TRANSACTIONS_WPM_MASTER() TRANSACTION_HANDLER_MASTER(wpm_handlers) # define TRANSACTIONS_WPM_MASTER() TRANSACTION_HANDLER_MASTER(wpm)
# define TRANSACTIONS_WPM_SLAVE() TRANSACTION_HANDLER_SLAVE(wpm_handlers) # define TRANSACTIONS_WPM_SLAVE() TRANSACTION_HANDLER_SLAVE(wpm)
# define TRANSACTIONS_WPM_REGISTRATIONS [PUT_WPM] = trans_initiator2target_initializer(current_wpm), # define TRANSACTIONS_WPM_REGISTRATIONS [PUT_WPM] = trans_initiator2target_initializer(current_wpm),
#else // defined(WPM_ENABLE) && defined(SPLIT_WPM_ENABLE) #else // defined(WPM_ENABLE) && defined(SPLIT_WPM_ENABLE)
@ -538,8 +535,8 @@ static void oled_handlers_slave(matrix_row_t master_matrix[], matrix_row_t slave
} }
} }
# define TRANSACTIONS_OLED_MASTER() TRANSACTION_HANDLER_MASTER(oled_handlers) # define TRANSACTIONS_OLED_MASTER() TRANSACTION_HANDLER_MASTER(oled)
# define TRANSACTIONS_OLED_SLAVE() TRANSACTION_HANDLER_SLAVE(oled_handlers) # define TRANSACTIONS_OLED_SLAVE() TRANSACTION_HANDLER_SLAVE(oled)
# define TRANSACTIONS_OLED_REGISTRATIONS [PUT_OLED] = trans_initiator2target_initializer(current_oled_state), # define TRANSACTIONS_OLED_REGISTRATIONS [PUT_OLED] = trans_initiator2target_initializer(current_oled_state),
#else // defined(OLED_DRIVER_ENABLE) && defined(SPLIT_OLED_ENABLE) #else // defined(OLED_DRIVER_ENABLE) && defined(SPLIT_OLED_ENABLE)
@ -569,8 +566,8 @@ static void st7565_handlers_slave(matrix_row_t master_matrix[], matrix_row_t sla
} }
} }
# define TRANSACTIONS_ST7565_MASTER() TRANSACTION_HANDLER_MASTER(st7565_handlers) # define TRANSACTIONS_ST7565_MASTER() TRANSACTION_HANDLER_MASTER(st7565)
# define TRANSACTIONS_ST7565_SLAVE() TRANSACTION_HANDLER_SLAVE(st7565_handlers) # define TRANSACTIONS_ST7565_SLAVE() TRANSACTION_HANDLER_SLAVE(st7565)
# define TRANSACTIONS_ST7565_REGISTRATIONS [PUT_ST7565] = trans_initiator2target_initializer(current_st7565_state), # define TRANSACTIONS_ST7565_REGISTRATIONS [PUT_ST7565] = trans_initiator2target_initializer(current_st7565_state),
#else // defined(ST7565_ENABLE) && defined(SPLIT_ST7565_ENABLE) #else // defined(ST7565_ENABLE) && defined(SPLIT_ST7565_ENABLE)
@ -618,7 +615,6 @@ split_transaction_desc_t split_transaction_table[NUM_TOTAL_TRANSACTIONS] = {
}; };
bool transactions_master(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) { bool transactions_master(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) {
bool okay = true;
TRANSACTIONS_SLAVE_MATRIX_MASTER(); TRANSACTIONS_SLAVE_MATRIX_MASTER();
TRANSACTIONS_MASTER_MATRIX_MASTER(); TRANSACTIONS_MASTER_MATRIX_MASTER();
TRANSACTIONS_ENCODERS_MASTER(); TRANSACTIONS_ENCODERS_MASTER();
@ -633,7 +629,7 @@ bool transactions_master(matrix_row_t master_matrix[], matrix_row_t slave_matrix
TRANSACTIONS_WPM_MASTER(); TRANSACTIONS_WPM_MASTER();
TRANSACTIONS_OLED_MASTER(); TRANSACTIONS_OLED_MASTER();
TRANSACTIONS_ST7565_MASTER(); TRANSACTIONS_ST7565_MASTER();
return okay; return true;
} }
void transactions_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) { void transactions_slave(matrix_row_t master_matrix[], matrix_row_t slave_matrix[]) {
@ -666,6 +662,10 @@ void transaction_register_rpc(int8_t transaction_id, slave_callback_t callback)
} }
bool transaction_rpc_exec(int8_t transaction_id, uint8_t initiator2target_buffer_size, const void *initiator2target_buffer, uint8_t target2initiator_buffer_size, void *target2initiator_buffer) { bool transaction_rpc_exec(int8_t transaction_id, uint8_t initiator2target_buffer_size, const void *initiator2target_buffer, uint8_t target2initiator_buffer_size, void *target2initiator_buffer) {
// Prevent transaction attempts while transport is disconnected
if (!is_transport_connected()) {
return false;
}
// Prevent invoking RPC on QMK core sync data // Prevent invoking RPC on QMK core sync data
if (transaction_id <= GET_RPC_RESP_DATA) return false; if (transaction_id <= GET_RPC_RESP_DATA) return false;
// Prevent sizing issues // Prevent sizing issues