Update 072 based CannonKeys boards to rely on core QMK support (#8716)

* Swap CannonKeys 072 boards over to rely on core QMK backlight support

* Rename keymap

* Rename via_tsangan back to via
master
Andrew Kannan 2020-04-07 00:01:11 -04:00 committed by GitHub
parent 6c8e205fc0
commit 0a643be39e
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
50 changed files with 42 additions and 14199 deletions

View File

@ -1,268 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* This file has been automatically generated using ChibiStudio board
* generator plugin. Do not edit manually.
*/
#include "hal.h"
#include "stm32_gpio.h"
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/**
* @brief Type of STM32 GPIO port setup.
*/
typedef struct {
uint32_t moder;
uint32_t otyper;
uint32_t ospeedr;
uint32_t pupdr;
uint32_t odr;
uint32_t afrl;
uint32_t afrh;
} gpio_setup_t;
/**
* @brief Type of STM32 GPIO initialization data.
*/
typedef struct {
#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
gpio_setup_t PAData;
#endif
#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
gpio_setup_t PBData;
#endif
#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
gpio_setup_t PCData;
#endif
#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
gpio_setup_t PDData;
#endif
#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
gpio_setup_t PEData;
#endif
#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
gpio_setup_t PFData;
#endif
#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
gpio_setup_t PGData;
#endif
#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
gpio_setup_t PHData;
#endif
#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
gpio_setup_t PIData;
#endif
#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
gpio_setup_t PJData;
#endif
#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
gpio_setup_t PKData;
#endif
} gpio_config_t;
/**
* @brief STM32 GPIO static initialization data.
*/
static const gpio_config_t gpio_default_config = {
#if STM32_HAS_GPIOA
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
#endif
#if STM32_HAS_GPIOB
{VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
#endif
#if STM32_HAS_GPIOC
{VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
#endif
#if STM32_HAS_GPIOD
{VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
#endif
#if STM32_HAS_GPIOE
{VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
#endif
#if STM32_HAS_GPIOF
{VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
#endif
#if STM32_HAS_GPIOG
{VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
#endif
#if STM32_HAS_GPIOH
{VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
#endif
#if STM32_HAS_GPIOI
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH},
#endif
#if STM32_HAS_GPIOJ
{VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH},
#endif
#if STM32_HAS_GPIOK
{VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH}
#endif
};
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
gpiop->OTYPER = config->otyper;
gpiop->OSPEEDR = config->ospeedr;
gpiop->PUPDR = config->pupdr;
gpiop->ODR = config->odr;
gpiop->AFRL = config->afrl;
gpiop->AFRH = config->afrh;
gpiop->MODER = config->moder;
}
static void stm32_gpio_init(void) {
/* Enabling GPIO-related clocks, the mask comes from the
registry header file.*/
rccResetAHB(STM32_GPIO_EN_MASK);
rccEnableAHB(STM32_GPIO_EN_MASK, true);
/* Initializing all the defined GPIO ports.*/
#if STM32_HAS_GPIOA
gpio_init(GPIOA, &gpio_default_config.PAData);
#endif
#if STM32_HAS_GPIOB
gpio_init(GPIOB, &gpio_default_config.PBData);
#endif
#if STM32_HAS_GPIOC
gpio_init(GPIOC, &gpio_default_config.PCData);
#endif
#if STM32_HAS_GPIOD
gpio_init(GPIOD, &gpio_default_config.PDData);
#endif
#if STM32_HAS_GPIOE
gpio_init(GPIOE, &gpio_default_config.PEData);
#endif
#if STM32_HAS_GPIOF
gpio_init(GPIOF, &gpio_default_config.PFData);
#endif
#if STM32_HAS_GPIOG
gpio_init(GPIOG, &gpio_default_config.PGData);
#endif
#if STM32_HAS_GPIOH
gpio_init(GPIOH, &gpio_default_config.PHData);
#endif
#if STM32_HAS_GPIOI
gpio_init(GPIOI, &gpio_default_config.PIData);
#endif
#if STM32_HAS_GPIOJ
gpio_init(GPIOJ, &gpio_default_config.PJData);
#endif
#if STM32_HAS_GPIOK
gpio_init(GPIOK, &gpio_default_config.PKData);
#endif
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Early initialization code.
* @details GPIO ports and system clocks are initialized before everything
* else.
*/
void __early_init(void) {
extern void enter_bootloader_mode_if_requested(void);
enter_bootloader_mode_if_requested();
stm32_gpio_init();
stm32_clock_init();
}
#if HAL_USE_SDC || defined(__DOXYGEN__)
/**
* @brief SDC card detection.
*/
bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
(void)sdcp;
/* TODO: Fill the implementation.*/
return true;
}
/**
* @brief SDC card write protection detection.
*/
bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
(void)sdcp;
/* TODO: Fill the implementation.*/
return false;
}
#endif /* HAL_USE_SDC */
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
/**
* @brief MMC_SPI card detection.
*/
bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
(void)mmcp;
/* TODO: Fill the implementation.*/
return true;
}
/**
* @brief MMC_SPI card write protection detection.
*/
bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
(void)mmcp;
/* TODO: Fill the implementation.*/
return false;
}
#endif
/**
* @brief Board-specific initialization code.
* @todo Add your board-specific code, if any.
*/
void boardInit(void) {
SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP;
SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP);
}

View File

@ -1,940 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* This file has been automatically generated using ChibiStudio board
* generator plugin. Do not edit manually.
*/
#ifndef BOARD_H
#define BOARD_H
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/*
* Setup for ST STM32F072B-Discovery board.
*/
/*
* Board identifier.
*/
#define BOARD_ST_STM32F072B_DISCOVERY
#define BOARD_NAME "ST STM32F072B-Discovery"
/*
* Board oscillators-related settings.
* NOTE: HSE not fitted.
*/
#if !defined(STM32_LSECLK)
#define STM32_LSECLK 32768
#endif
#define STM32_LSEDRV (3U << 3U)
#if !defined(STM32_HSECLK)
#define STM32_HSECLK 0U
#endif
#define STM32_HSE_BYPASS
/*
* MCU type as defined in the ST header.
*/
#define STM32F072xB
/*
* IO pins assignments.
*/
#define GPIOA_BUTTON 0U
#define GPIOA_PIN1 1U
#define GPIOA_PIN2 2U
#define GPIOA_PIN3 3U
#define GPIOA_PIN4 4U
#define GPIOA_PIN5 5U
#define GPIOA_PIN6 6U
#define GPIOA_PIN7 7U
#define GPIOA_PIN8 8U
#define GPIOA_PIN9 9U
#define GPIOA_PIN10 10U
#define GPIOA_USB_DM 11U
#define GPIOA_USB_DP 12U
#define GPIOA_SWDIO 13U
#define GPIOA_SWCLK 14U
#define GPIOA_PIN15 15U
#define GPIOB_PIN0 0U
#define GPIOB_PIN1 1U
#define GPIOB_PIN2 2U
#define GPIOB_PIN3 3U
#define GPIOB_PIN4 4U
#define GPIOB_PIN5 5U
#define GPIOB_PIN6 6U
#define GPIOB_PIN7 7U
#define GPIOB_PIN8 8U
#define GPIOB_PIN9 9U
#define GPIOB_PIN10 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
#define GPIOB_SPI2_SCK 13U
#define GPIOB_SPI2_MISO 14U
#define GPIOB_SPI2_MOSI 15U
#define GPIOC_MEMS_CS 0U
#define GPIOC_PIN1 1U
#define GPIOC_PIN2 2U
#define GPIOC_PIN3 3U
#define GPIOC_PIN4 4U
#define GPIOC_PIN5 5U
#define GPIOC_LED_RED 6U
#define GPIOC_LED_BLUE 7U
#define GPIOC_LED_ORANGE 8U
#define GPIOC_LED_GREEN 9U
#define GPIOC_PIN10 10U
#define GPIOC_PIN11 11U
#define GPIOC_PIN12 12U
#define GPIOC_PIN13 13U
#define GPIOC_OSC32_IN 14U
#define GPIOC_OSC32_OUT 15U
#define GPIOD_PIN0 0U
#define GPIOD_PIN1 1U
#define GPIOD_PIN2 2U
#define GPIOD_PIN3 3U
#define GPIOD_PIN4 4U
#define GPIOD_PIN5 5U
#define GPIOD_PIN6 6U
#define GPIOD_PIN7 7U
#define GPIOD_PIN8 8U
#define GPIOD_PIN9 9U
#define GPIOD_PIN10 10U
#define GPIOD_PIN11 11U
#define GPIOD_PIN12 12U
#define GPIOD_PIN13 13U
#define GPIOD_PIN14 14U
#define GPIOD_PIN15 15U
#define GPIOE_PIN0 0U
#define GPIOE_PIN1 1U
#define GPIOE_PIN2 2U
#define GPIOE_PIN3 3U
#define GPIOE_PIN4 4U
#define GPIOE_PIN5 5U
#define GPIOE_PIN6 6U
#define GPIOE_PIN7 7U
#define GPIOE_PIN8 8U
#define GPIOE_PIN9 9U
#define GPIOE_PIN10 10U
#define GPIOE_PIN11 11U
#define GPIOE_PIN12 12U
#define GPIOE_PIN13 13U
#define GPIOE_PIN14 14U
#define GPIOE_PIN15 15U
#define GPIOF_OSC_IN 0U
#define GPIOF_OSC_OUT 1U
#define GPIOF_PIN2 2U
#define GPIOF_PIN3 3U
#define GPIOF_PIN4 4U
#define GPIOF_PIN5 5U
#define GPIOF_PIN6 6U
#define GPIOF_PIN7 7U
#define GPIOF_PIN8 8U
#define GPIOF_PIN9 9U
#define GPIOF_PIN10 10U
#define GPIOF_PIN11 11U
#define GPIOF_PIN12 12U
#define GPIOF_PIN13 13U
#define GPIOF_PIN14 14U
#define GPIOF_PIN15 15U
/*
* IO lines assignments.
*/
#define LINE_BUTTON PAL_LINE(GPIOA, 0U)
#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U)
#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U)
#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U)
#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U)
#define LINE_LED_RED PAL_LINE(GPIOC, 6U)
#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U)
#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U)
#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U)
#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U)
#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U)
#define LINE_OSC_IN PAL_LINE(GPIOF, 0U)
#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U)
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
* Please refer to the STM32 Reference Manual for details.
*/
#define PIN_MODE_INPUT(n) (0U << ((n) * 2U))
#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U))
#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U))
#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U))
#define PIN_ODR_LOW(n) (0U << (n))
#define PIN_ODR_HIGH(n) (1U << (n))
#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U))
#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U))
#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U))
#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U))
#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U))
#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U))
#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U))
#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
/*
* GPIOA setup:
*
* PA0 - BUTTON (input floating).
* PA1 - PIN1 (input pullup).
* PA2 - PIN2 (input pullup).
* PA3 - PIN3 (input pullup).
* PA4 - PIN4 (input pullup).
* PA5 - PIN5 (input pullup).
* PA6 - PIN6 (input pullup).
* PA7 - PIN7 (input pullup).
* PA8 - PIN8 (input pullup).
* PA9 - PIN9 (input pullup).
* PA10 - PIN10 (input pullup).
* PA11 - USB_DM (input floating).
* PA12 - USB_DP (input floating).
* PA13 - SWDIO (alternate 0).
* PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \
PIN_MODE_INPUT(GPIOA_PIN1) | \
PIN_MODE_INPUT(GPIOA_PIN2) | \
PIN_MODE_INPUT(GPIOA_PIN3) | \
PIN_MODE_INPUT(GPIOA_PIN4) | \
PIN_MODE_INPUT(GPIOA_PIN5) | \
PIN_MODE_INPUT(GPIOA_PIN6) | \
PIN_MODE_INPUT(GPIOA_PIN7) | \
PIN_MODE_INPUT(GPIOA_PIN8) | \
PIN_MODE_INPUT(GPIOA_PIN9) | \
PIN_MODE_INPUT(GPIOA_PIN10) | \
PIN_MODE_INPUT(GPIOA_USB_DM) | \
PIN_MODE_INPUT(GPIOA_USB_DP) | \
PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
PIN_MODE_INPUT(GPIOA_PIN15))
#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \
PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \
PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \
PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \
PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \
PIN_PUPDR_PULLUP(GPIOA_PIN1) | \
PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
PIN_PUPDR_PULLUP(GPIOA_PIN5) | \
PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
PIN_PUPDR_PULLUP(GPIOA_PIN7) | \
PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
PIN_PUPDR_PULLUP(GPIOA_PIN15))
#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \
PIN_ODR_HIGH(GPIOA_PIN1) | \
PIN_ODR_HIGH(GPIOA_PIN2) | \
PIN_ODR_HIGH(GPIOA_PIN3) | \
PIN_ODR_HIGH(GPIOA_PIN4) | \
PIN_ODR_HIGH(GPIOA_PIN5) | \
PIN_ODR_HIGH(GPIOA_PIN6) | \
PIN_ODR_HIGH(GPIOA_PIN7) | \
PIN_ODR_HIGH(GPIOA_PIN8) | \
PIN_ODR_HIGH(GPIOA_PIN9) | \
PIN_ODR_HIGH(GPIOA_PIN10) | \
PIN_ODR_HIGH(GPIOA_USB_DM) | \
PIN_ODR_HIGH(GPIOA_USB_DP) | \
PIN_ODR_HIGH(GPIOA_SWDIO) | \
PIN_ODR_HIGH(GPIOA_SWCLK) | \
PIN_ODR_HIGH(GPIOA_PIN15))
#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \
PIN_AFIO_AF(GPIOA_PIN1, 0U) | \
PIN_AFIO_AF(GPIOA_PIN2, 0U) | \
PIN_AFIO_AF(GPIOA_PIN3, 0U) | \
PIN_AFIO_AF(GPIOA_PIN4, 0U) | \
PIN_AFIO_AF(GPIOA_PIN5, 0U) | \
PIN_AFIO_AF(GPIOA_PIN6, 0U) | \
PIN_AFIO_AF(GPIOA_PIN7, 0U))
#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \
PIN_AFIO_AF(GPIOA_PIN9, 0U) | \
PIN_AFIO_AF(GPIOA_PIN10, 0U) | \
PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \
PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \
PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \
PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \
PIN_AFIO_AF(GPIOA_PIN15, 0U))
/*
* GPIOB setup:
*
* PB0 - PIN0 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - PIN3 (input pullup).
* PB4 - PIN4 (input pullup).
* PB5 - PIN5 (input pullup).
* PB6 - PIN6 (input pullup).
* PB7 - PIN7 (input pullup).
* PB8 - PIN8 (input pullup).
* PB9 - PIN9 (input pullup).
* PB10 - PIN10 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
* PB13 - SPI2_SCK (alternate 0).
* PB14 - SPI2_MISO (alternate 0).
* PB15 - SPI2_MOSI (alternate 0).
*/
#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_INPUT(GPIOB_PIN3) | \
PIN_MODE_INPUT(GPIOB_PIN4) | \
PIN_MODE_INPUT(GPIOB_PIN5) | \
PIN_MODE_INPUT(GPIOB_PIN6) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
PIN_MODE_INPUT(GPIOB_PIN8) | \
PIN_MODE_INPUT(GPIOB_PIN9) | \
PIN_MODE_INPUT(GPIOB_PIN10) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \
PIN_OSPEED_HIGH(GPIOB_PIN2) | \
PIN_OSPEED_HIGH(GPIOB_PIN3) | \
PIN_OSPEED_HIGH(GPIOB_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_PIN3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
PIN_PUPDR_PULLUP(GPIOB_PIN6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
PIN_ODR_HIGH(GPIOB_PIN1) | \
PIN_ODR_HIGH(GPIOB_PIN2) | \
PIN_ODR_HIGH(GPIOB_PIN3) | \
PIN_ODR_HIGH(GPIOB_PIN4) | \
PIN_ODR_HIGH(GPIOB_PIN5) | \
PIN_ODR_HIGH(GPIOB_PIN6) | \
PIN_ODR_HIGH(GPIOB_PIN7) | \
PIN_ODR_HIGH(GPIOB_PIN8) | \
PIN_ODR_HIGH(GPIOB_PIN9) | \
PIN_ODR_HIGH(GPIOB_PIN10) | \
PIN_ODR_HIGH(GPIOB_PIN11) | \
PIN_ODR_HIGH(GPIOB_PIN12) | \
PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \
PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \
PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \
PIN_AFIO_AF(GPIOB_PIN1, 0U) | \
PIN_AFIO_AF(GPIOB_PIN2, 0U) | \
PIN_AFIO_AF(GPIOB_PIN3, 0U) | \
PIN_AFIO_AF(GPIOB_PIN4, 0U) | \
PIN_AFIO_AF(GPIOB_PIN5, 0U) | \
PIN_AFIO_AF(GPIOB_PIN6, 0U) | \
PIN_AFIO_AF(GPIOB_PIN7, 0U))
#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \
PIN_AFIO_AF(GPIOB_PIN9, 0U) | \
PIN_AFIO_AF(GPIOB_PIN10, 0U) | \
PIN_AFIO_AF(GPIOB_PIN11, 0U) | \
PIN_AFIO_AF(GPIOB_PIN12, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
/*
* GPIOC setup:
*
* PC0 - MEMS_CS (output pushpull maximum).
* PC1 - PIN1 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
* PC5 - PIN5 (input pullup).
* PC6 - LED_RED (output pushpull maximum).
* PC7 - LED_BLUE (output pushpull maximum).
* PC8 - LED_ORANGE (output pushpull maximum).
* PC9 - LED_GREEN (output pushpull maximum).
* PC10 - PIN10 (input pullup).
* PC11 - PIN11 (input pullup).
* PC12 - PIN12 (input pullup).
* PC13 - PIN13 (input pullup).
* PC14 - OSC32_IN (input floating).
* PC15 - OSC32_OUT (input floating).
*/
#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \
PIN_MODE_INPUT(GPIOC_PIN1) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
PIN_MODE_INPUT(GPIOC_PIN5) | \
PIN_MODE_OUTPUT(GPIOC_LED_RED) | \
PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \
PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \
PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \
PIN_MODE_INPUT(GPIOC_PIN10) | \
PIN_MODE_INPUT(GPIOC_PIN11) | \
PIN_MODE_INPUT(GPIOC_PIN12) | \
PIN_MODE_INPUT(GPIOC_PIN13) | \
PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
PIN_MODE_INPUT(GPIOC_OSC32_OUT))
#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \
PIN_OSPEED_HIGH(GPIOC_LED_RED) | \
PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \
PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \
PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \
PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \
PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \
PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \
PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \
PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \
PIN_ODR_HIGH(GPIOC_PIN1) | \
PIN_ODR_HIGH(GPIOC_PIN2) | \
PIN_ODR_HIGH(GPIOC_PIN3) | \
PIN_ODR_HIGH(GPIOC_PIN4) | \
PIN_ODR_HIGH(GPIOC_PIN5) | \
PIN_ODR_LOW(GPIOC_LED_RED) | \
PIN_ODR_LOW(GPIOC_LED_BLUE) | \
PIN_ODR_LOW(GPIOC_LED_ORANGE) | \
PIN_ODR_LOW(GPIOC_LED_GREEN) | \
PIN_ODR_HIGH(GPIOC_PIN10) | \
PIN_ODR_HIGH(GPIOC_PIN11) | \
PIN_ODR_HIGH(GPIOC_PIN12) | \
PIN_ODR_HIGH(GPIOC_PIN13) | \
PIN_ODR_HIGH(GPIOC_OSC32_IN) | \
PIN_ODR_HIGH(GPIOC_OSC32_OUT))
#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \
PIN_AFIO_AF(GPIOC_PIN1, 0U) | \
PIN_AFIO_AF(GPIOC_PIN2, 0U) | \
PIN_AFIO_AF(GPIOC_PIN3, 0U) | \
PIN_AFIO_AF(GPIOC_PIN4, 0U) | \
PIN_AFIO_AF(GPIOC_PIN5, 0U) | \
PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \
PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \
PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \
PIN_AFIO_AF(GPIOC_PIN10, 0U) | \
PIN_AFIO_AF(GPIOC_PIN11, 0U) | \
PIN_AFIO_AF(GPIOC_PIN12, 0U) | \
PIN_AFIO_AF(GPIOC_PIN13, 0U) | \
PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \
PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
/*
* GPIOD setup:
*
* PD0 - PIN0 (input pullup).
* PD1 - PIN1 (input pullup).
* PD2 - PIN2 (input pullup).
* PD3 - PIN3 (input pullup).
* PD4 - PIN4 (input pullup).
* PD5 - PIN5 (input pullup).
* PD6 - PIN6 (input pullup).
* PD7 - PIN7 (input pullup).
* PD8 - PIN8 (input pullup).
* PD9 - PIN9 (input pullup).
* PD10 - PIN10 (input pullup).
* PD11 - PIN11 (input pullup).
* PD12 - PIN12 (input pullup).
* PD13 - PIN13 (input pullup).
* PD14 - PIN14 (input pullup).
* PD15 - PIN15 (input pullup).
*/
#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
PIN_MODE_INPUT(GPIOD_PIN1) | \
PIN_MODE_INPUT(GPIOD_PIN2) | \
PIN_MODE_INPUT(GPIOD_PIN3) | \
PIN_MODE_INPUT(GPIOD_PIN4) | \
PIN_MODE_INPUT(GPIOD_PIN5) | \
PIN_MODE_INPUT(GPIOD_PIN6) | \
PIN_MODE_INPUT(GPIOD_PIN7) | \
PIN_MODE_INPUT(GPIOD_PIN8) | \
PIN_MODE_INPUT(GPIOD_PIN9) | \
PIN_MODE_INPUT(GPIOD_PIN10) | \
PIN_MODE_INPUT(GPIOD_PIN11) | \
PIN_MODE_INPUT(GPIOD_PIN12) | \
PIN_MODE_INPUT(GPIOD_PIN13) | \
PIN_MODE_INPUT(GPIOD_PIN14) | \
PIN_MODE_INPUT(GPIOD_PIN15))
#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN15))
#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
PIN_PUPDR_PULLUP(GPIOD_PIN15))
#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
PIN_ODR_HIGH(GPIOD_PIN1) | \
PIN_ODR_HIGH(GPIOD_PIN2) | \
PIN_ODR_HIGH(GPIOD_PIN3) | \
PIN_ODR_HIGH(GPIOD_PIN4) | \
PIN_ODR_HIGH(GPIOD_PIN5) | \
PIN_ODR_HIGH(GPIOD_PIN6) | \
PIN_ODR_HIGH(GPIOD_PIN7) | \
PIN_ODR_HIGH(GPIOD_PIN8) | \
PIN_ODR_HIGH(GPIOD_PIN9) | \
PIN_ODR_HIGH(GPIOD_PIN10) | \
PIN_ODR_HIGH(GPIOD_PIN11) | \
PIN_ODR_HIGH(GPIOD_PIN12) | \
PIN_ODR_HIGH(GPIOD_PIN13) | \
PIN_ODR_HIGH(GPIOD_PIN14) | \
PIN_ODR_HIGH(GPIOD_PIN15))
#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \
PIN_AFIO_AF(GPIOD_PIN1, 0U) | \
PIN_AFIO_AF(GPIOD_PIN2, 0U) | \
PIN_AFIO_AF(GPIOD_PIN3, 0U) | \
PIN_AFIO_AF(GPIOD_PIN4, 0U) | \
PIN_AFIO_AF(GPIOD_PIN5, 0U) | \
PIN_AFIO_AF(GPIOD_PIN6, 0U) | \
PIN_AFIO_AF(GPIOD_PIN7, 0U))
#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \
PIN_AFIO_AF(GPIOD_PIN9, 0U) | \
PIN_AFIO_AF(GPIOD_PIN10, 0U) | \
PIN_AFIO_AF(GPIOD_PIN11, 0U) | \
PIN_AFIO_AF(GPIOD_PIN12, 0U) | \
PIN_AFIO_AF(GPIOD_PIN13, 0U) | \
PIN_AFIO_AF(GPIOD_PIN14, 0U) | \
PIN_AFIO_AF(GPIOD_PIN15, 0U))
/*
* GPIOE setup:
*
* PE0 - PIN0 (input pullup).
* PE1 - PIN1 (input pullup).
* PE2 - PIN2 (input pullup).
* PE3 - PIN3 (input pullup).
* PE4 - PIN4 (input pullup).
* PE5 - PIN5 (input pullup).
* PE6 - PIN6 (input pullup).
* PE7 - PIN7 (input pullup).
* PE8 - PIN8 (input pullup).
* PE9 - PIN9 (input pullup).
* PE10 - PIN10 (input pullup).
* PE11 - PIN11 (input pullup).
* PE12 - PIN12 (input pullup).
* PE13 - PIN13 (input pullup).
* PE14 - PIN14 (input pullup).
* PE15 - PIN15 (input pullup).
*/
#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
PIN_MODE_INPUT(GPIOE_PIN1) | \
PIN_MODE_INPUT(GPIOE_PIN2) | \
PIN_MODE_INPUT(GPIOE_PIN3) | \
PIN_MODE_INPUT(GPIOE_PIN4) | \
PIN_MODE_INPUT(GPIOE_PIN5) | \
PIN_MODE_INPUT(GPIOE_PIN6) | \
PIN_MODE_INPUT(GPIOE_PIN7) | \
PIN_MODE_INPUT(GPIOE_PIN8) | \
PIN_MODE_INPUT(GPIOE_PIN9) | \
PIN_MODE_INPUT(GPIOE_PIN10) | \
PIN_MODE_INPUT(GPIOE_PIN11) | \
PIN_MODE_INPUT(GPIOE_PIN12) | \
PIN_MODE_INPUT(GPIOE_PIN13) | \
PIN_MODE_INPUT(GPIOE_PIN14) | \
PIN_MODE_INPUT(GPIOE_PIN15))
#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN15))
#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
PIN_PUPDR_PULLUP(GPIOE_PIN2) | \
PIN_PUPDR_PULLUP(GPIOE_PIN3) | \
PIN_PUPDR_PULLUP(GPIOE_PIN4) | \
PIN_PUPDR_PULLUP(GPIOE_PIN5) | \
PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
PIN_PUPDR_PULLUP(GPIOE_PIN8) | \
PIN_PUPDR_PULLUP(GPIOE_PIN9) | \
PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
PIN_PUPDR_PULLUP(GPIOE_PIN11) | \
PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
PIN_PUPDR_PULLUP(GPIOE_PIN13) | \
PIN_PUPDR_PULLUP(GPIOE_PIN14) | \
PIN_PUPDR_PULLUP(GPIOE_PIN15))
#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
PIN_ODR_HIGH(GPIOE_PIN1) | \
PIN_ODR_HIGH(GPIOE_PIN2) | \
PIN_ODR_HIGH(GPIOE_PIN3) | \
PIN_ODR_HIGH(GPIOE_PIN4) | \
PIN_ODR_HIGH(GPIOE_PIN5) | \
PIN_ODR_HIGH(GPIOE_PIN6) | \
PIN_ODR_HIGH(GPIOE_PIN7) | \
PIN_ODR_HIGH(GPIOE_PIN8) | \
PIN_ODR_HIGH(GPIOE_PIN9) | \
PIN_ODR_HIGH(GPIOE_PIN10) | \
PIN_ODR_HIGH(GPIOE_PIN11) | \
PIN_ODR_HIGH(GPIOE_PIN12) | \
PIN_ODR_HIGH(GPIOE_PIN13) | \
PIN_ODR_HIGH(GPIOE_PIN14) | \
PIN_ODR_HIGH(GPIOE_PIN15))
#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \
PIN_AFIO_AF(GPIOE_PIN1, 0U) | \
PIN_AFIO_AF(GPIOE_PIN2, 0U) | \
PIN_AFIO_AF(GPIOE_PIN3, 0U) | \
PIN_AFIO_AF(GPIOE_PIN4, 0U) | \
PIN_AFIO_AF(GPIOE_PIN5, 0U) | \
PIN_AFIO_AF(GPIOE_PIN6, 0U) | \
PIN_AFIO_AF(GPIOE_PIN7, 0U))
#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \
PIN_AFIO_AF(GPIOE_PIN9, 0U) | \
PIN_AFIO_AF(GPIOE_PIN10, 0U) | \
PIN_AFIO_AF(GPIOE_PIN11, 0U) | \
PIN_AFIO_AF(GPIOE_PIN12, 0U) | \
PIN_AFIO_AF(GPIOE_PIN13, 0U) | \
PIN_AFIO_AF(GPIOE_PIN14, 0U) | \
PIN_AFIO_AF(GPIOE_PIN15, 0U))
/*
* GPIOF setup:
*
* PF0 - OSC_IN (input floating).
* PF1 - OSC_OUT (input floating).
* PF2 - PIN2 (input pullup).
* PF3 - PIN3 (input pullup).
* PF4 - PIN4 (input pullup).
* PF5 - PIN5 (input pullup).
* PF6 - PIN6 (input pullup).
* PF7 - PIN7 (input pullup).
* PF8 - PIN8 (input pullup).
* PF9 - PIN9 (input pullup).
* PF10 - PIN10 (input pullup).
* PF11 - PIN11 (input pullup).
* PF12 - PIN12 (input pullup).
* PF13 - PIN13 (input pullup).
* PF14 - PIN14 (input pullup).
* PF15 - PIN15 (input pullup).
*/
#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \
PIN_MODE_INPUT(GPIOF_OSC_OUT) | \
PIN_MODE_INPUT(GPIOF_PIN2) | \
PIN_MODE_INPUT(GPIOF_PIN3) | \
PIN_MODE_INPUT(GPIOF_PIN4) | \
PIN_MODE_INPUT(GPIOF_PIN5) | \
PIN_MODE_INPUT(GPIOF_PIN6) | \
PIN_MODE_INPUT(GPIOF_PIN7) | \
PIN_MODE_INPUT(GPIOF_PIN8) | \
PIN_MODE_INPUT(GPIOF_PIN9) | \
PIN_MODE_INPUT(GPIOF_PIN10) | \
PIN_MODE_INPUT(GPIOF_PIN11) | \
PIN_MODE_INPUT(GPIOF_PIN12) | \
PIN_MODE_INPUT(GPIOF_PIN13) | \
PIN_MODE_INPUT(GPIOF_PIN14) | \
PIN_MODE_INPUT(GPIOF_PIN15))
#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \
PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \
PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN15))
#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \
PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \
PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
PIN_PUPDR_PULLUP(GPIOF_PIN15))
#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \
PIN_ODR_HIGH(GPIOF_OSC_OUT) | \
PIN_ODR_HIGH(GPIOF_PIN2) | \
PIN_ODR_HIGH(GPIOF_PIN3) | \
PIN_ODR_HIGH(GPIOF_PIN4) | \
PIN_ODR_HIGH(GPIOF_PIN5) | \
PIN_ODR_HIGH(GPIOF_PIN6) | \
PIN_ODR_HIGH(GPIOF_PIN7) | \
PIN_ODR_HIGH(GPIOF_PIN8) | \
PIN_ODR_HIGH(GPIOF_PIN9) | \
PIN_ODR_HIGH(GPIOF_PIN10) | \
PIN_ODR_HIGH(GPIOF_PIN11) | \
PIN_ODR_HIGH(GPIOF_PIN12) | \
PIN_ODR_HIGH(GPIOF_PIN13) | \
PIN_ODR_HIGH(GPIOF_PIN14) | \
PIN_ODR_HIGH(GPIOF_PIN15))
#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \
PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \
PIN_AFIO_AF(GPIOF_PIN2, 0U) | \
PIN_AFIO_AF(GPIOF_PIN3, 0U) | \
PIN_AFIO_AF(GPIOF_PIN4, 0U) | \
PIN_AFIO_AF(GPIOF_PIN5, 0U) | \
PIN_AFIO_AF(GPIOF_PIN6, 0U) | \
PIN_AFIO_AF(GPIOF_PIN7, 0U))
#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \
PIN_AFIO_AF(GPIOF_PIN9, 0U) | \
PIN_AFIO_AF(GPIOF_PIN10, 0U) | \
PIN_AFIO_AF(GPIOF_PIN11, 0U) | \
PIN_AFIO_AF(GPIOF_PIN12, 0U) | \
PIN_AFIO_AF(GPIOF_PIN13, 0U) | \
PIN_AFIO_AF(GPIOF_PIN14, 0U) | \
PIN_AFIO_AF(GPIOF_PIN15, 0U))
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */
#endif /* BOARD_H */

View File

@ -1,5 +0,0 @@
# List of all the board related files.
BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
# Required include directories
BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

View File

@ -1,703 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<!-- STM32F0xx board Template -->
<board
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
<configuration_settings>
<templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
<output_path>..</output_path>
<hal_version>3.0.x</hal_version>
</configuration_settings>
<board_name>ST STM32F072B-Discovery</board_name>
<board_id>ST_STM32F072B_DISCOVERY</board_id>
<board_functions></board_functions>
<subtype>STM32F072xB</subtype>
<clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
LSEBypass="false" LSEDrive="3 High Drive (default)" />
<ports>
<GPIOA>
<pin0
ID="BUTTON"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID="USB_DM"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID="USB_DP"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID="SWDIO"
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin14
ID="SWCLK"
Type="PushPull"
Speed="Maximum"
Resistor="PullDown"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOA>
<GPIOB>
<pin0
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID="SPI2_SCK"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin14
ID="SPI2_MISO"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin15
ID="SPI2_MOSI"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
</GPIOB>
<GPIOC>
<pin0
ID="MEMS_CS"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Output"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID="LED_RED"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin7
ID="LED_BLUE"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin8
ID="LED_ORANGE"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" ></pin8>
<pin9
ID="LED_GREEN"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID="OSC32_IN"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID="OSC32_OUT"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOC>
<GPIOD>
<pin0
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOD>
<GPIOE>
<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
</GPIOE>
<GPIOF>
<pin0
ID="OSC_IN"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID="OSC_OUT"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOF>
</ports>
</board>

View File

@ -33,6 +33,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROW_PINS { B1, B0, A7, A5, A4 }
#define DIODE_DIRECTION COL2ROW
#define BACKLIGHT_PIN A6
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
#define BACKLIGHT_LEVELS 6
#define BACKLIGHT_BREATHING
#define BREATHING_PERIOD 6
@ -52,16 +56,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGB_DI_PIN B15
#define RGBLED_NUM 14
#define WS2812_SPI SPID2
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 1
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE
// Let VIA handle the QMK RGBLIGHT
#define VIA_QMK_RGBLIGHT_ENABLE
#define WS2812_SPI_MOSI_PAL_MODE 0
/*
* Feature disable options

View File

@ -1,15 +1,10 @@
# MCU name
MCU = STM32F072
BOARD = ST_STM32F072B_DISCOVERY
# Build Options
# comment out to disable the options.
#
# project specific files
VPATH += keyboards/cannonkeys/stm32f072
SRC = keyboard.c \
led.c
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
@ -19,7 +14,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
CUSTOM_MATRIX = no # Custom matrix file
# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = spi

View File

@ -1,268 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* This file has been automatically generated using ChibiStudio board
* generator plugin. Do not edit manually.
*/
#include "hal.h"
#include "stm32_gpio.h"
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/**
* @brief Type of STM32 GPIO port setup.
*/
typedef struct {
uint32_t moder;
uint32_t otyper;
uint32_t ospeedr;
uint32_t pupdr;
uint32_t odr;
uint32_t afrl;
uint32_t afrh;
} gpio_setup_t;
/**
* @brief Type of STM32 GPIO initialization data.
*/
typedef struct {
#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
gpio_setup_t PAData;
#endif
#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
gpio_setup_t PBData;
#endif
#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
gpio_setup_t PCData;
#endif
#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
gpio_setup_t PDData;
#endif
#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
gpio_setup_t PEData;
#endif
#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
gpio_setup_t PFData;
#endif
#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
gpio_setup_t PGData;
#endif
#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
gpio_setup_t PHData;
#endif
#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
gpio_setup_t PIData;
#endif
#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
gpio_setup_t PJData;
#endif
#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
gpio_setup_t PKData;
#endif
} gpio_config_t;
/**
* @brief STM32 GPIO static initialization data.
*/
static const gpio_config_t gpio_default_config = {
#if STM32_HAS_GPIOA
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
#endif
#if STM32_HAS_GPIOB
{VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
#endif
#if STM32_HAS_GPIOC
{VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
#endif
#if STM32_HAS_GPIOD
{VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
#endif
#if STM32_HAS_GPIOE
{VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
#endif
#if STM32_HAS_GPIOF
{VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
#endif
#if STM32_HAS_GPIOG
{VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
#endif
#if STM32_HAS_GPIOH
{VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
#endif
#if STM32_HAS_GPIOI
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH},
#endif
#if STM32_HAS_GPIOJ
{VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH},
#endif
#if STM32_HAS_GPIOK
{VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH}
#endif
};
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
gpiop->OTYPER = config->otyper;
gpiop->OSPEEDR = config->ospeedr;
gpiop->PUPDR = config->pupdr;
gpiop->ODR = config->odr;
gpiop->AFRL = config->afrl;
gpiop->AFRH = config->afrh;
gpiop->MODER = config->moder;
}
static void stm32_gpio_init(void) {
/* Enabling GPIO-related clocks, the mask comes from the
registry header file.*/
rccResetAHB(STM32_GPIO_EN_MASK);
rccEnableAHB(STM32_GPIO_EN_MASK, true);
/* Initializing all the defined GPIO ports.*/
#if STM32_HAS_GPIOA
gpio_init(GPIOA, &gpio_default_config.PAData);
#endif
#if STM32_HAS_GPIOB
gpio_init(GPIOB, &gpio_default_config.PBData);
#endif
#if STM32_HAS_GPIOC
gpio_init(GPIOC, &gpio_default_config.PCData);
#endif
#if STM32_HAS_GPIOD
gpio_init(GPIOD, &gpio_default_config.PDData);
#endif
#if STM32_HAS_GPIOE
gpio_init(GPIOE, &gpio_default_config.PEData);
#endif
#if STM32_HAS_GPIOF
gpio_init(GPIOF, &gpio_default_config.PFData);
#endif
#if STM32_HAS_GPIOG
gpio_init(GPIOG, &gpio_default_config.PGData);
#endif
#if STM32_HAS_GPIOH
gpio_init(GPIOH, &gpio_default_config.PHData);
#endif
#if STM32_HAS_GPIOI
gpio_init(GPIOI, &gpio_default_config.PIData);
#endif
#if STM32_HAS_GPIOJ
gpio_init(GPIOJ, &gpio_default_config.PJData);
#endif
#if STM32_HAS_GPIOK
gpio_init(GPIOK, &gpio_default_config.PKData);
#endif
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Early initialization code.
* @details GPIO ports and system clocks are initialized before everything
* else.
*/
void __early_init(void) {
extern void enter_bootloader_mode_if_requested(void);
enter_bootloader_mode_if_requested();
stm32_gpio_init();
stm32_clock_init();
}
#if HAL_USE_SDC || defined(__DOXYGEN__)
/**
* @brief SDC card detection.
*/
bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
(void)sdcp;
/* TODO: Fill the implementation.*/
return true;
}
/**
* @brief SDC card write protection detection.
*/
bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
(void)sdcp;
/* TODO: Fill the implementation.*/
return false;
}
#endif /* HAL_USE_SDC */
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
/**
* @brief MMC_SPI card detection.
*/
bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
(void)mmcp;
/* TODO: Fill the implementation.*/
return true;
}
/**
* @brief MMC_SPI card write protection detection.
*/
bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
(void)mmcp;
/* TODO: Fill the implementation.*/
return false;
}
#endif
/**
* @brief Board-specific initialization code.
* @todo Add your board-specific code, if any.
*/
void boardInit(void) {
SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP;
SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP);
}

View File

@ -1,940 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* This file has been automatically generated using ChibiStudio board
* generator plugin. Do not edit manually.
*/
#ifndef BOARD_H
#define BOARD_H
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/*
* Setup for ST STM32F072B-Discovery board.
*/
/*
* Board identifier.
*/
#define BOARD_ST_STM32F072B_DISCOVERY
#define BOARD_NAME "ST STM32F072B-Discovery"
/*
* Board oscillators-related settings.
* NOTE: HSE not fitted.
*/
#if !defined(STM32_LSECLK)
#define STM32_LSECLK 32768
#endif
#define STM32_LSEDRV (3U << 3U)
#if !defined(STM32_HSECLK)
#define STM32_HSECLK 0U
#endif
#define STM32_HSE_BYPASS
/*
* MCU type as defined in the ST header.
*/
#define STM32F072xB
/*
* IO pins assignments.
*/
#define GPIOA_BUTTON 0U
#define GPIOA_PIN1 1U
#define GPIOA_PIN2 2U
#define GPIOA_PIN3 3U
#define GPIOA_PIN4 4U
#define GPIOA_PIN5 5U
#define GPIOA_PIN6 6U
#define GPIOA_PIN7 7U
#define GPIOA_PIN8 8U
#define GPIOA_PIN9 9U
#define GPIOA_PIN10 10U
#define GPIOA_USB_DM 11U
#define GPIOA_USB_DP 12U
#define GPIOA_SWDIO 13U
#define GPIOA_SWCLK 14U
#define GPIOA_PIN15 15U
#define GPIOB_PIN0 0U
#define GPIOB_PIN1 1U
#define GPIOB_PIN2 2U
#define GPIOB_PIN3 3U
#define GPIOB_PIN4 4U
#define GPIOB_PIN5 5U
#define GPIOB_PIN6 6U
#define GPIOB_PIN7 7U
#define GPIOB_PIN8 8U
#define GPIOB_PIN9 9U
#define GPIOB_PIN10 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
#define GPIOB_SPI2_SCK 13U
#define GPIOB_SPI2_MISO 14U
#define GPIOB_SPI2_MOSI 15U
#define GPIOC_MEMS_CS 0U
#define GPIOC_PIN1 1U
#define GPIOC_PIN2 2U
#define GPIOC_PIN3 3U
#define GPIOC_PIN4 4U
#define GPIOC_PIN5 5U
#define GPIOC_LED_RED 6U
#define GPIOC_LED_BLUE 7U
#define GPIOC_LED_ORANGE 8U
#define GPIOC_LED_GREEN 9U
#define GPIOC_PIN10 10U
#define GPIOC_PIN11 11U
#define GPIOC_PIN12 12U
#define GPIOC_PIN13 13U
#define GPIOC_OSC32_IN 14U
#define GPIOC_OSC32_OUT 15U
#define GPIOD_PIN0 0U
#define GPIOD_PIN1 1U
#define GPIOD_PIN2 2U
#define GPIOD_PIN3 3U
#define GPIOD_PIN4 4U
#define GPIOD_PIN5 5U
#define GPIOD_PIN6 6U
#define GPIOD_PIN7 7U
#define GPIOD_PIN8 8U
#define GPIOD_PIN9 9U
#define GPIOD_PIN10 10U
#define GPIOD_PIN11 11U
#define GPIOD_PIN12 12U
#define GPIOD_PIN13 13U
#define GPIOD_PIN14 14U
#define GPIOD_PIN15 15U
#define GPIOE_PIN0 0U
#define GPIOE_PIN1 1U
#define GPIOE_PIN2 2U
#define GPIOE_PIN3 3U
#define GPIOE_PIN4 4U
#define GPIOE_PIN5 5U
#define GPIOE_PIN6 6U
#define GPIOE_PIN7 7U
#define GPIOE_PIN8 8U
#define GPIOE_PIN9 9U
#define GPIOE_PIN10 10U
#define GPIOE_PIN11 11U
#define GPIOE_PIN12 12U
#define GPIOE_PIN13 13U
#define GPIOE_PIN14 14U
#define GPIOE_PIN15 15U
#define GPIOF_OSC_IN 0U
#define GPIOF_OSC_OUT 1U
#define GPIOF_PIN2 2U
#define GPIOF_PIN3 3U
#define GPIOF_PIN4 4U
#define GPIOF_PIN5 5U
#define GPIOF_PIN6 6U
#define GPIOF_PIN7 7U
#define GPIOF_PIN8 8U
#define GPIOF_PIN9 9U
#define GPIOF_PIN10 10U
#define GPIOF_PIN11 11U
#define GPIOF_PIN12 12U
#define GPIOF_PIN13 13U
#define GPIOF_PIN14 14U
#define GPIOF_PIN15 15U
/*
* IO lines assignments.
*/
#define LINE_BUTTON PAL_LINE(GPIOA, 0U)
#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U)
#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U)
#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U)
#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U)
#define LINE_LED_RED PAL_LINE(GPIOC, 6U)
#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U)
#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U)
#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U)
#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U)
#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U)
#define LINE_OSC_IN PAL_LINE(GPIOF, 0U)
#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U)
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
* Please refer to the STM32 Reference Manual for details.
*/
#define PIN_MODE_INPUT(n) (0U << ((n) * 2U))
#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U))
#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U))
#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U))
#define PIN_ODR_LOW(n) (0U << (n))
#define PIN_ODR_HIGH(n) (1U << (n))
#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U))
#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U))
#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U))
#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U))
#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U))
#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U))
#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U))
#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
/*
* GPIOA setup:
*
* PA0 - BUTTON (input floating).
* PA1 - PIN1 (input pullup).
* PA2 - PIN2 (input pullup).
* PA3 - PIN3 (input pullup).
* PA4 - PIN4 (input pullup).
* PA5 - PIN5 (input pullup).
* PA6 - PIN6 (input pullup).
* PA7 - PIN7 (input pullup).
* PA8 - PIN8 (input pullup).
* PA9 - PIN9 (input pullup).
* PA10 - PIN10 (input pullup).
* PA11 - USB_DM (input floating).
* PA12 - USB_DP (input floating).
* PA13 - SWDIO (alternate 0).
* PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \
PIN_MODE_INPUT(GPIOA_PIN1) | \
PIN_MODE_INPUT(GPIOA_PIN2) | \
PIN_MODE_INPUT(GPIOA_PIN3) | \
PIN_MODE_INPUT(GPIOA_PIN4) | \
PIN_MODE_INPUT(GPIOA_PIN5) | \
PIN_MODE_INPUT(GPIOA_PIN6) | \
PIN_MODE_INPUT(GPIOA_PIN7) | \
PIN_MODE_INPUT(GPIOA_PIN8) | \
PIN_MODE_INPUT(GPIOA_PIN9) | \
PIN_MODE_INPUT(GPIOA_PIN10) | \
PIN_MODE_INPUT(GPIOA_USB_DM) | \
PIN_MODE_INPUT(GPIOA_USB_DP) | \
PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
PIN_MODE_INPUT(GPIOA_PIN15))
#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \
PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \
PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \
PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \
PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \
PIN_PUPDR_PULLUP(GPIOA_PIN1) | \
PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
PIN_PUPDR_PULLUP(GPIOA_PIN5) | \
PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
PIN_PUPDR_PULLUP(GPIOA_PIN7) | \
PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
PIN_PUPDR_PULLUP(GPIOA_PIN15))
#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \
PIN_ODR_HIGH(GPIOA_PIN1) | \
PIN_ODR_HIGH(GPIOA_PIN2) | \
PIN_ODR_HIGH(GPIOA_PIN3) | \
PIN_ODR_HIGH(GPIOA_PIN4) | \
PIN_ODR_HIGH(GPIOA_PIN5) | \
PIN_ODR_HIGH(GPIOA_PIN6) | \
PIN_ODR_HIGH(GPIOA_PIN7) | \
PIN_ODR_HIGH(GPIOA_PIN8) | \
PIN_ODR_HIGH(GPIOA_PIN9) | \
PIN_ODR_HIGH(GPIOA_PIN10) | \
PIN_ODR_HIGH(GPIOA_USB_DM) | \
PIN_ODR_HIGH(GPIOA_USB_DP) | \
PIN_ODR_HIGH(GPIOA_SWDIO) | \
PIN_ODR_HIGH(GPIOA_SWCLK) | \
PIN_ODR_HIGH(GPIOA_PIN15))
#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \
PIN_AFIO_AF(GPIOA_PIN1, 0U) | \
PIN_AFIO_AF(GPIOA_PIN2, 0U) | \
PIN_AFIO_AF(GPIOA_PIN3, 0U) | \
PIN_AFIO_AF(GPIOA_PIN4, 0U) | \
PIN_AFIO_AF(GPIOA_PIN5, 0U) | \
PIN_AFIO_AF(GPIOA_PIN6, 0U) | \
PIN_AFIO_AF(GPIOA_PIN7, 0U))
#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \
PIN_AFIO_AF(GPIOA_PIN9, 0U) | \
PIN_AFIO_AF(GPIOA_PIN10, 0U) | \
PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \
PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \
PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \
PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \
PIN_AFIO_AF(GPIOA_PIN15, 0U))
/*
* GPIOB setup:
*
* PB0 - PIN0 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - PIN3 (input pullup).
* PB4 - PIN4 (input pullup).
* PB5 - PIN5 (input pullup).
* PB6 - PIN6 (input pullup).
* PB7 - PIN7 (input pullup).
* PB8 - PIN8 (input pullup).
* PB9 - PIN9 (input pullup).
* PB10 - PIN10 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
* PB13 - SPI2_SCK (alternate 0).
* PB14 - SPI2_MISO (alternate 0).
* PB15 - SPI2_MOSI (alternate 0).
*/
#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_INPUT(GPIOB_PIN3) | \
PIN_MODE_INPUT(GPIOB_PIN4) | \
PIN_MODE_INPUT(GPIOB_PIN5) | \
PIN_MODE_INPUT(GPIOB_PIN6) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
PIN_MODE_INPUT(GPIOB_PIN8) | \
PIN_MODE_INPUT(GPIOB_PIN9) | \
PIN_MODE_INPUT(GPIOB_PIN10) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \
PIN_OSPEED_HIGH(GPIOB_PIN2) | \
PIN_OSPEED_HIGH(GPIOB_PIN3) | \
PIN_OSPEED_HIGH(GPIOB_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_PIN3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
PIN_PUPDR_PULLUP(GPIOB_PIN6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
PIN_ODR_HIGH(GPIOB_PIN1) | \
PIN_ODR_HIGH(GPIOB_PIN2) | \
PIN_ODR_HIGH(GPIOB_PIN3) | \
PIN_ODR_HIGH(GPIOB_PIN4) | \
PIN_ODR_HIGH(GPIOB_PIN5) | \
PIN_ODR_HIGH(GPIOB_PIN6) | \
PIN_ODR_HIGH(GPIOB_PIN7) | \
PIN_ODR_HIGH(GPIOB_PIN8) | \
PIN_ODR_HIGH(GPIOB_PIN9) | \
PIN_ODR_HIGH(GPIOB_PIN10) | \
PIN_ODR_HIGH(GPIOB_PIN11) | \
PIN_ODR_HIGH(GPIOB_PIN12) | \
PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \
PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \
PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \
PIN_AFIO_AF(GPIOB_PIN1, 0U) | \
PIN_AFIO_AF(GPIOB_PIN2, 0U) | \
PIN_AFIO_AF(GPIOB_PIN3, 0U) | \
PIN_AFIO_AF(GPIOB_PIN4, 0U) | \
PIN_AFIO_AF(GPIOB_PIN5, 0U) | \
PIN_AFIO_AF(GPIOB_PIN6, 0U) | \
PIN_AFIO_AF(GPIOB_PIN7, 0U))
#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \
PIN_AFIO_AF(GPIOB_PIN9, 0U) | \
PIN_AFIO_AF(GPIOB_PIN10, 0U) | \
PIN_AFIO_AF(GPIOB_PIN11, 0U) | \
PIN_AFIO_AF(GPIOB_PIN12, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
/*
* GPIOC setup:
*
* PC0 - MEMS_CS (output pushpull maximum).
* PC1 - PIN1 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
* PC5 - PIN5 (input pullup).
* PC6 - LED_RED (output pushpull maximum).
* PC7 - LED_BLUE (output pushpull maximum).
* PC8 - LED_ORANGE (output pushpull maximum).
* PC9 - LED_GREEN (output pushpull maximum).
* PC10 - PIN10 (input pullup).
* PC11 - PIN11 (input pullup).
* PC12 - PIN12 (input pullup).
* PC13 - PIN13 (input pullup).
* PC14 - OSC32_IN (input floating).
* PC15 - OSC32_OUT (input floating).
*/
#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \
PIN_MODE_INPUT(GPIOC_PIN1) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
PIN_MODE_INPUT(GPIOC_PIN5) | \
PIN_MODE_OUTPUT(GPIOC_LED_RED) | \
PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \
PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \
PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \
PIN_MODE_INPUT(GPIOC_PIN10) | \
PIN_MODE_INPUT(GPIOC_PIN11) | \
PIN_MODE_INPUT(GPIOC_PIN12) | \
PIN_MODE_INPUT(GPIOC_PIN13) | \
PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
PIN_MODE_INPUT(GPIOC_OSC32_OUT))
#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \
PIN_OSPEED_HIGH(GPIOC_LED_RED) | \
PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \
PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \
PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \
PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \
PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \
PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \
PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \
PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \
PIN_ODR_HIGH(GPIOC_PIN1) | \
PIN_ODR_HIGH(GPIOC_PIN2) | \
PIN_ODR_HIGH(GPIOC_PIN3) | \
PIN_ODR_HIGH(GPIOC_PIN4) | \
PIN_ODR_HIGH(GPIOC_PIN5) | \
PIN_ODR_LOW(GPIOC_LED_RED) | \
PIN_ODR_LOW(GPIOC_LED_BLUE) | \
PIN_ODR_LOW(GPIOC_LED_ORANGE) | \
PIN_ODR_LOW(GPIOC_LED_GREEN) | \
PIN_ODR_HIGH(GPIOC_PIN10) | \
PIN_ODR_HIGH(GPIOC_PIN11) | \
PIN_ODR_HIGH(GPIOC_PIN12) | \
PIN_ODR_HIGH(GPIOC_PIN13) | \
PIN_ODR_HIGH(GPIOC_OSC32_IN) | \
PIN_ODR_HIGH(GPIOC_OSC32_OUT))
#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \
PIN_AFIO_AF(GPIOC_PIN1, 0U) | \
PIN_AFIO_AF(GPIOC_PIN2, 0U) | \
PIN_AFIO_AF(GPIOC_PIN3, 0U) | \
PIN_AFIO_AF(GPIOC_PIN4, 0U) | \
PIN_AFIO_AF(GPIOC_PIN5, 0U) | \
PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \
PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \
PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \
PIN_AFIO_AF(GPIOC_PIN10, 0U) | \
PIN_AFIO_AF(GPIOC_PIN11, 0U) | \
PIN_AFIO_AF(GPIOC_PIN12, 0U) | \
PIN_AFIO_AF(GPIOC_PIN13, 0U) | \
PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \
PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
/*
* GPIOD setup:
*
* PD0 - PIN0 (input pullup).
* PD1 - PIN1 (input pullup).
* PD2 - PIN2 (input pullup).
* PD3 - PIN3 (input pullup).
* PD4 - PIN4 (input pullup).
* PD5 - PIN5 (input pullup).
* PD6 - PIN6 (input pullup).
* PD7 - PIN7 (input pullup).
* PD8 - PIN8 (input pullup).
* PD9 - PIN9 (input pullup).
* PD10 - PIN10 (input pullup).
* PD11 - PIN11 (input pullup).
* PD12 - PIN12 (input pullup).
* PD13 - PIN13 (input pullup).
* PD14 - PIN14 (input pullup).
* PD15 - PIN15 (input pullup).
*/
#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
PIN_MODE_INPUT(GPIOD_PIN1) | \
PIN_MODE_INPUT(GPIOD_PIN2) | \
PIN_MODE_INPUT(GPIOD_PIN3) | \
PIN_MODE_INPUT(GPIOD_PIN4) | \
PIN_MODE_INPUT(GPIOD_PIN5) | \
PIN_MODE_INPUT(GPIOD_PIN6) | \
PIN_MODE_INPUT(GPIOD_PIN7) | \
PIN_MODE_INPUT(GPIOD_PIN8) | \
PIN_MODE_INPUT(GPIOD_PIN9) | \
PIN_MODE_INPUT(GPIOD_PIN10) | \
PIN_MODE_INPUT(GPIOD_PIN11) | \
PIN_MODE_INPUT(GPIOD_PIN12) | \
PIN_MODE_INPUT(GPIOD_PIN13) | \
PIN_MODE_INPUT(GPIOD_PIN14) | \
PIN_MODE_INPUT(GPIOD_PIN15))
#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN15))
#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
PIN_PUPDR_PULLUP(GPIOD_PIN15))
#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
PIN_ODR_HIGH(GPIOD_PIN1) | \
PIN_ODR_HIGH(GPIOD_PIN2) | \
PIN_ODR_HIGH(GPIOD_PIN3) | \
PIN_ODR_HIGH(GPIOD_PIN4) | \
PIN_ODR_HIGH(GPIOD_PIN5) | \
PIN_ODR_HIGH(GPIOD_PIN6) | \
PIN_ODR_HIGH(GPIOD_PIN7) | \
PIN_ODR_HIGH(GPIOD_PIN8) | \
PIN_ODR_HIGH(GPIOD_PIN9) | \
PIN_ODR_HIGH(GPIOD_PIN10) | \
PIN_ODR_HIGH(GPIOD_PIN11) | \
PIN_ODR_HIGH(GPIOD_PIN12) | \
PIN_ODR_HIGH(GPIOD_PIN13) | \
PIN_ODR_HIGH(GPIOD_PIN14) | \
PIN_ODR_HIGH(GPIOD_PIN15))
#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \
PIN_AFIO_AF(GPIOD_PIN1, 0U) | \
PIN_AFIO_AF(GPIOD_PIN2, 0U) | \
PIN_AFIO_AF(GPIOD_PIN3, 0U) | \
PIN_AFIO_AF(GPIOD_PIN4, 0U) | \
PIN_AFIO_AF(GPIOD_PIN5, 0U) | \
PIN_AFIO_AF(GPIOD_PIN6, 0U) | \
PIN_AFIO_AF(GPIOD_PIN7, 0U))
#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \
PIN_AFIO_AF(GPIOD_PIN9, 0U) | \
PIN_AFIO_AF(GPIOD_PIN10, 0U) | \
PIN_AFIO_AF(GPIOD_PIN11, 0U) | \
PIN_AFIO_AF(GPIOD_PIN12, 0U) | \
PIN_AFIO_AF(GPIOD_PIN13, 0U) | \
PIN_AFIO_AF(GPIOD_PIN14, 0U) | \
PIN_AFIO_AF(GPIOD_PIN15, 0U))
/*
* GPIOE setup:
*
* PE0 - PIN0 (input pullup).
* PE1 - PIN1 (input pullup).
* PE2 - PIN2 (input pullup).
* PE3 - PIN3 (input pullup).
* PE4 - PIN4 (input pullup).
* PE5 - PIN5 (input pullup).
* PE6 - PIN6 (input pullup).
* PE7 - PIN7 (input pullup).
* PE8 - PIN8 (input pullup).
* PE9 - PIN9 (input pullup).
* PE10 - PIN10 (input pullup).
* PE11 - PIN11 (input pullup).
* PE12 - PIN12 (input pullup).
* PE13 - PIN13 (input pullup).
* PE14 - PIN14 (input pullup).
* PE15 - PIN15 (input pullup).
*/
#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
PIN_MODE_INPUT(GPIOE_PIN1) | \
PIN_MODE_INPUT(GPIOE_PIN2) | \
PIN_MODE_INPUT(GPIOE_PIN3) | \
PIN_MODE_INPUT(GPIOE_PIN4) | \
PIN_MODE_INPUT(GPIOE_PIN5) | \
PIN_MODE_INPUT(GPIOE_PIN6) | \
PIN_MODE_INPUT(GPIOE_PIN7) | \
PIN_MODE_INPUT(GPIOE_PIN8) | \
PIN_MODE_INPUT(GPIOE_PIN9) | \
PIN_MODE_INPUT(GPIOE_PIN10) | \
PIN_MODE_INPUT(GPIOE_PIN11) | \
PIN_MODE_INPUT(GPIOE_PIN12) | \
PIN_MODE_INPUT(GPIOE_PIN13) | \
PIN_MODE_INPUT(GPIOE_PIN14) | \
PIN_MODE_INPUT(GPIOE_PIN15))
#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN15))
#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
PIN_PUPDR_PULLUP(GPIOE_PIN2) | \
PIN_PUPDR_PULLUP(GPIOE_PIN3) | \
PIN_PUPDR_PULLUP(GPIOE_PIN4) | \
PIN_PUPDR_PULLUP(GPIOE_PIN5) | \
PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
PIN_PUPDR_PULLUP(GPIOE_PIN8) | \
PIN_PUPDR_PULLUP(GPIOE_PIN9) | \
PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
PIN_PUPDR_PULLUP(GPIOE_PIN11) | \
PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
PIN_PUPDR_PULLUP(GPIOE_PIN13) | \
PIN_PUPDR_PULLUP(GPIOE_PIN14) | \
PIN_PUPDR_PULLUP(GPIOE_PIN15))
#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
PIN_ODR_HIGH(GPIOE_PIN1) | \
PIN_ODR_HIGH(GPIOE_PIN2) | \
PIN_ODR_HIGH(GPIOE_PIN3) | \
PIN_ODR_HIGH(GPIOE_PIN4) | \
PIN_ODR_HIGH(GPIOE_PIN5) | \
PIN_ODR_HIGH(GPIOE_PIN6) | \
PIN_ODR_HIGH(GPIOE_PIN7) | \
PIN_ODR_HIGH(GPIOE_PIN8) | \
PIN_ODR_HIGH(GPIOE_PIN9) | \
PIN_ODR_HIGH(GPIOE_PIN10) | \
PIN_ODR_HIGH(GPIOE_PIN11) | \
PIN_ODR_HIGH(GPIOE_PIN12) | \
PIN_ODR_HIGH(GPIOE_PIN13) | \
PIN_ODR_HIGH(GPIOE_PIN14) | \
PIN_ODR_HIGH(GPIOE_PIN15))
#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \
PIN_AFIO_AF(GPIOE_PIN1, 0U) | \
PIN_AFIO_AF(GPIOE_PIN2, 0U) | \
PIN_AFIO_AF(GPIOE_PIN3, 0U) | \
PIN_AFIO_AF(GPIOE_PIN4, 0U) | \
PIN_AFIO_AF(GPIOE_PIN5, 0U) | \
PIN_AFIO_AF(GPIOE_PIN6, 0U) | \
PIN_AFIO_AF(GPIOE_PIN7, 0U))
#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \
PIN_AFIO_AF(GPIOE_PIN9, 0U) | \
PIN_AFIO_AF(GPIOE_PIN10, 0U) | \
PIN_AFIO_AF(GPIOE_PIN11, 0U) | \
PIN_AFIO_AF(GPIOE_PIN12, 0U) | \
PIN_AFIO_AF(GPIOE_PIN13, 0U) | \
PIN_AFIO_AF(GPIOE_PIN14, 0U) | \
PIN_AFIO_AF(GPIOE_PIN15, 0U))
/*
* GPIOF setup:
*
* PF0 - OSC_IN (input floating).
* PF1 - OSC_OUT (input floating).
* PF2 - PIN2 (input pullup).
* PF3 - PIN3 (input pullup).
* PF4 - PIN4 (input pullup).
* PF5 - PIN5 (input pullup).
* PF6 - PIN6 (input pullup).
* PF7 - PIN7 (input pullup).
* PF8 - PIN8 (input pullup).
* PF9 - PIN9 (input pullup).
* PF10 - PIN10 (input pullup).
* PF11 - PIN11 (input pullup).
* PF12 - PIN12 (input pullup).
* PF13 - PIN13 (input pullup).
* PF14 - PIN14 (input pullup).
* PF15 - PIN15 (input pullup).
*/
#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \
PIN_MODE_INPUT(GPIOF_OSC_OUT) | \
PIN_MODE_INPUT(GPIOF_PIN2) | \
PIN_MODE_INPUT(GPIOF_PIN3) | \
PIN_MODE_INPUT(GPIOF_PIN4) | \
PIN_MODE_INPUT(GPIOF_PIN5) | \
PIN_MODE_INPUT(GPIOF_PIN6) | \
PIN_MODE_INPUT(GPIOF_PIN7) | \
PIN_MODE_INPUT(GPIOF_PIN8) | \
PIN_MODE_INPUT(GPIOF_PIN9) | \
PIN_MODE_INPUT(GPIOF_PIN10) | \
PIN_MODE_INPUT(GPIOF_PIN11) | \
PIN_MODE_INPUT(GPIOF_PIN12) | \
PIN_MODE_INPUT(GPIOF_PIN13) | \
PIN_MODE_INPUT(GPIOF_PIN14) | \
PIN_MODE_INPUT(GPIOF_PIN15))
#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \
PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \
PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN15))
#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \
PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \
PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
PIN_PUPDR_PULLUP(GPIOF_PIN15))
#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \
PIN_ODR_HIGH(GPIOF_OSC_OUT) | \
PIN_ODR_HIGH(GPIOF_PIN2) | \
PIN_ODR_HIGH(GPIOF_PIN3) | \
PIN_ODR_HIGH(GPIOF_PIN4) | \
PIN_ODR_HIGH(GPIOF_PIN5) | \
PIN_ODR_HIGH(GPIOF_PIN6) | \
PIN_ODR_HIGH(GPIOF_PIN7) | \
PIN_ODR_HIGH(GPIOF_PIN8) | \
PIN_ODR_HIGH(GPIOF_PIN9) | \
PIN_ODR_HIGH(GPIOF_PIN10) | \
PIN_ODR_HIGH(GPIOF_PIN11) | \
PIN_ODR_HIGH(GPIOF_PIN12) | \
PIN_ODR_HIGH(GPIOF_PIN13) | \
PIN_ODR_HIGH(GPIOF_PIN14) | \
PIN_ODR_HIGH(GPIOF_PIN15))
#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \
PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \
PIN_AFIO_AF(GPIOF_PIN2, 0U) | \
PIN_AFIO_AF(GPIOF_PIN3, 0U) | \
PIN_AFIO_AF(GPIOF_PIN4, 0U) | \
PIN_AFIO_AF(GPIOF_PIN5, 0U) | \
PIN_AFIO_AF(GPIOF_PIN6, 0U) | \
PIN_AFIO_AF(GPIOF_PIN7, 0U))
#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \
PIN_AFIO_AF(GPIOF_PIN9, 0U) | \
PIN_AFIO_AF(GPIOF_PIN10, 0U) | \
PIN_AFIO_AF(GPIOF_PIN11, 0U) | \
PIN_AFIO_AF(GPIOF_PIN12, 0U) | \
PIN_AFIO_AF(GPIOF_PIN13, 0U) | \
PIN_AFIO_AF(GPIOF_PIN14, 0U) | \
PIN_AFIO_AF(GPIOF_PIN15, 0U))
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */
#endif /* BOARD_H */

View File

@ -1,5 +0,0 @@
# List of all the board related files.
BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
# Required include directories
BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

View File

@ -1,703 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<!-- STM32F0xx board Template -->
<board
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
<configuration_settings>
<templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
<output_path>..</output_path>
<hal_version>3.0.x</hal_version>
</configuration_settings>
<board_name>ST STM32F072B-Discovery</board_name>
<board_id>ST_STM32F072B_DISCOVERY</board_id>
<board_functions></board_functions>
<subtype>STM32F072xB</subtype>
<clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
LSEBypass="false" LSEDrive="3 High Drive (default)" />
<ports>
<GPIOA>
<pin0
ID="BUTTON"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID="USB_DM"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID="USB_DP"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID="SWDIO"
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin14
ID="SWCLK"
Type="PushPull"
Speed="Maximum"
Resistor="PullDown"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOA>
<GPIOB>
<pin0
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID="SPI2_SCK"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin14
ID="SPI2_MISO"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin15
ID="SPI2_MOSI"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
</GPIOB>
<GPIOC>
<pin0
ID="MEMS_CS"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Output"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID="LED_RED"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin7
ID="LED_BLUE"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin8
ID="LED_ORANGE"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" ></pin8>
<pin9
ID="LED_GREEN"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID="OSC32_IN"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID="OSC32_OUT"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOC>
<GPIOD>
<pin0
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOD>
<GPIOE>
<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
</GPIOE>
<GPIOF>
<pin0
ID="OSC_IN"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID="OSC_OUT"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOF>
</ports>
</board>

View File

@ -33,6 +33,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROW_PINS { A13, A14, A15, C13, B8 }
#define DIODE_DIRECTION COL2ROW
#define BACKLIGHT_PIN A6
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
#define BACKLIGHT_LEVELS 6
#define BACKLIGHT_BREATHING
#define BREATHING_PERIOD 6

View File

@ -1,15 +1,10 @@
# MCU name
MCU = STM32F072
BOARD = ST_STM32F072B_DISCOVERY
# Build Options
# comment out to disable the options.
#
# project specific files
VPATH += keyboards/cannonkeys/stm32f072
SRC = keyboard.c \
led.c
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
@ -19,7 +14,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
CUSTOM_MATRIX = no # Custom matrix file
# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = no

View File

@ -1,268 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* This file has been automatically generated using ChibiStudio board
* generator plugin. Do not edit manually.
*/
#include "hal.h"
#include "stm32_gpio.h"
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/**
* @brief Type of STM32 GPIO port setup.
*/
typedef struct {
uint32_t moder;
uint32_t otyper;
uint32_t ospeedr;
uint32_t pupdr;
uint32_t odr;
uint32_t afrl;
uint32_t afrh;
} gpio_setup_t;
/**
* @brief Type of STM32 GPIO initialization data.
*/
typedef struct {
#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
gpio_setup_t PAData;
#endif
#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
gpio_setup_t PBData;
#endif
#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
gpio_setup_t PCData;
#endif
#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
gpio_setup_t PDData;
#endif
#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
gpio_setup_t PEData;
#endif
#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
gpio_setup_t PFData;
#endif
#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
gpio_setup_t PGData;
#endif
#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
gpio_setup_t PHData;
#endif
#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
gpio_setup_t PIData;
#endif
#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
gpio_setup_t PJData;
#endif
#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
gpio_setup_t PKData;
#endif
} gpio_config_t;
/**
* @brief STM32 GPIO static initialization data.
*/
static const gpio_config_t gpio_default_config = {
#if STM32_HAS_GPIOA
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
#endif
#if STM32_HAS_GPIOB
{VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
#endif
#if STM32_HAS_GPIOC
{VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
#endif
#if STM32_HAS_GPIOD
{VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
#endif
#if STM32_HAS_GPIOE
{VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
#endif
#if STM32_HAS_GPIOF
{VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
#endif
#if STM32_HAS_GPIOG
{VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
#endif
#if STM32_HAS_GPIOH
{VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
#endif
#if STM32_HAS_GPIOI
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH},
#endif
#if STM32_HAS_GPIOJ
{VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH},
#endif
#if STM32_HAS_GPIOK
{VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH}
#endif
};
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
gpiop->OTYPER = config->otyper;
gpiop->OSPEEDR = config->ospeedr;
gpiop->PUPDR = config->pupdr;
gpiop->ODR = config->odr;
gpiop->AFRL = config->afrl;
gpiop->AFRH = config->afrh;
gpiop->MODER = config->moder;
}
static void stm32_gpio_init(void) {
/* Enabling GPIO-related clocks, the mask comes from the
registry header file.*/
rccResetAHB(STM32_GPIO_EN_MASK);
rccEnableAHB(STM32_GPIO_EN_MASK, true);
/* Initializing all the defined GPIO ports.*/
#if STM32_HAS_GPIOA
gpio_init(GPIOA, &gpio_default_config.PAData);
#endif
#if STM32_HAS_GPIOB
gpio_init(GPIOB, &gpio_default_config.PBData);
#endif
#if STM32_HAS_GPIOC
gpio_init(GPIOC, &gpio_default_config.PCData);
#endif
#if STM32_HAS_GPIOD
gpio_init(GPIOD, &gpio_default_config.PDData);
#endif
#if STM32_HAS_GPIOE
gpio_init(GPIOE, &gpio_default_config.PEData);
#endif
#if STM32_HAS_GPIOF
gpio_init(GPIOF, &gpio_default_config.PFData);
#endif
#if STM32_HAS_GPIOG
gpio_init(GPIOG, &gpio_default_config.PGData);
#endif
#if STM32_HAS_GPIOH
gpio_init(GPIOH, &gpio_default_config.PHData);
#endif
#if STM32_HAS_GPIOI
gpio_init(GPIOI, &gpio_default_config.PIData);
#endif
#if STM32_HAS_GPIOJ
gpio_init(GPIOJ, &gpio_default_config.PJData);
#endif
#if STM32_HAS_GPIOK
gpio_init(GPIOK, &gpio_default_config.PKData);
#endif
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Early initialization code.
* @details GPIO ports and system clocks are initialized before everything
* else.
*/
void __early_init(void) {
extern void enter_bootloader_mode_if_requested(void);
enter_bootloader_mode_if_requested();
stm32_gpio_init();
stm32_clock_init();
}
#if HAL_USE_SDC || defined(__DOXYGEN__)
/**
* @brief SDC card detection.
*/
bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
(void)sdcp;
/* TODO: Fill the implementation.*/
return true;
}
/**
* @brief SDC card write protection detection.
*/
bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
(void)sdcp;
/* TODO: Fill the implementation.*/
return false;
}
#endif /* HAL_USE_SDC */
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
/**
* @brief MMC_SPI card detection.
*/
bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
(void)mmcp;
/* TODO: Fill the implementation.*/
return true;
}
/**
* @brief MMC_SPI card write protection detection.
*/
bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
(void)mmcp;
/* TODO: Fill the implementation.*/
return false;
}
#endif
/**
* @brief Board-specific initialization code.
* @todo Add your board-specific code, if any.
*/
void boardInit(void) {
SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP;
SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP);
}

View File

@ -1,940 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* This file has been automatically generated using ChibiStudio board
* generator plugin. Do not edit manually.
*/
#ifndef BOARD_H
#define BOARD_H
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/*
* Setup for ST STM32F072B-Discovery board.
*/
/*
* Board identifier.
*/
#define BOARD_ST_STM32F072B_DISCOVERY
#define BOARD_NAME "ST STM32F072B-Discovery"
/*
* Board oscillators-related settings.
* NOTE: HSE not fitted.
*/
#if !defined(STM32_LSECLK)
#define STM32_LSECLK 32768
#endif
#define STM32_LSEDRV (3U << 3U)
#if !defined(STM32_HSECLK)
#define STM32_HSECLK 0U
#endif
#define STM32_HSE_BYPASS
/*
* MCU type as defined in the ST header.
*/
#define STM32F072xB
/*
* IO pins assignments.
*/
#define GPIOA_BUTTON 0U
#define GPIOA_PIN1 1U
#define GPIOA_PIN2 2U
#define GPIOA_PIN3 3U
#define GPIOA_PIN4 4U
#define GPIOA_PIN5 5U
#define GPIOA_PIN6 6U
#define GPIOA_PIN7 7U
#define GPIOA_PIN8 8U
#define GPIOA_PIN9 9U
#define GPIOA_PIN10 10U
#define GPIOA_USB_DM 11U
#define GPIOA_USB_DP 12U
#define GPIOA_SWDIO 13U
#define GPIOA_SWCLK 14U
#define GPIOA_PIN15 15U
#define GPIOB_PIN0 0U
#define GPIOB_PIN1 1U
#define GPIOB_PIN2 2U
#define GPIOB_PIN3 3U
#define GPIOB_PIN4 4U
#define GPIOB_PIN5 5U
#define GPIOB_PIN6 6U
#define GPIOB_PIN7 7U
#define GPIOB_PIN8 8U
#define GPIOB_PIN9 9U
#define GPIOB_PIN10 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
#define GPIOB_SPI2_SCK 13U
#define GPIOB_SPI2_MISO 14U
#define GPIOB_SPI2_MOSI 15U
#define GPIOC_MEMS_CS 0U
#define GPIOC_PIN1 1U
#define GPIOC_PIN2 2U
#define GPIOC_PIN3 3U
#define GPIOC_PIN4 4U
#define GPIOC_PIN5 5U
#define GPIOC_LED_RED 6U
#define GPIOC_LED_BLUE 7U
#define GPIOC_LED_ORANGE 8U
#define GPIOC_LED_GREEN 9U
#define GPIOC_PIN10 10U
#define GPIOC_PIN11 11U
#define GPIOC_PIN12 12U
#define GPIOC_PIN13 13U
#define GPIOC_OSC32_IN 14U
#define GPIOC_OSC32_OUT 15U
#define GPIOD_PIN0 0U
#define GPIOD_PIN1 1U
#define GPIOD_PIN2 2U
#define GPIOD_PIN3 3U
#define GPIOD_PIN4 4U
#define GPIOD_PIN5 5U
#define GPIOD_PIN6 6U
#define GPIOD_PIN7 7U
#define GPIOD_PIN8 8U
#define GPIOD_PIN9 9U
#define GPIOD_PIN10 10U
#define GPIOD_PIN11 11U
#define GPIOD_PIN12 12U
#define GPIOD_PIN13 13U
#define GPIOD_PIN14 14U
#define GPIOD_PIN15 15U
#define GPIOE_PIN0 0U
#define GPIOE_PIN1 1U
#define GPIOE_PIN2 2U
#define GPIOE_PIN3 3U
#define GPIOE_PIN4 4U
#define GPIOE_PIN5 5U
#define GPIOE_PIN6 6U
#define GPIOE_PIN7 7U
#define GPIOE_PIN8 8U
#define GPIOE_PIN9 9U
#define GPIOE_PIN10 10U
#define GPIOE_PIN11 11U
#define GPIOE_PIN12 12U
#define GPIOE_PIN13 13U
#define GPIOE_PIN14 14U
#define GPIOE_PIN15 15U
#define GPIOF_OSC_IN 0U
#define GPIOF_OSC_OUT 1U
#define GPIOF_PIN2 2U
#define GPIOF_PIN3 3U
#define GPIOF_PIN4 4U
#define GPIOF_PIN5 5U
#define GPIOF_PIN6 6U
#define GPIOF_PIN7 7U
#define GPIOF_PIN8 8U
#define GPIOF_PIN9 9U
#define GPIOF_PIN10 10U
#define GPIOF_PIN11 11U
#define GPIOF_PIN12 12U
#define GPIOF_PIN13 13U
#define GPIOF_PIN14 14U
#define GPIOF_PIN15 15U
/*
* IO lines assignments.
*/
#define LINE_BUTTON PAL_LINE(GPIOA, 0U)
#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U)
#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U)
#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U)
#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U)
#define LINE_LED_RED PAL_LINE(GPIOC, 6U)
#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U)
#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U)
#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U)
#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U)
#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U)
#define LINE_OSC_IN PAL_LINE(GPIOF, 0U)
#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U)
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
* Please refer to the STM32 Reference Manual for details.
*/
#define PIN_MODE_INPUT(n) (0U << ((n) * 2U))
#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U))
#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U))
#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U))
#define PIN_ODR_LOW(n) (0U << (n))
#define PIN_ODR_HIGH(n) (1U << (n))
#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U))
#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U))
#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U))
#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U))
#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U))
#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U))
#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U))
#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
/*
* GPIOA setup:
*
* PA0 - BUTTON (input floating).
* PA1 - PIN1 (input pullup).
* PA2 - PIN2 (input pullup).
* PA3 - PIN3 (input pullup).
* PA4 - PIN4 (input pullup).
* PA5 - PIN5 (input pullup).
* PA6 - PIN6 (input pullup).
* PA7 - PIN7 (input pullup).
* PA8 - PIN8 (input pullup).
* PA9 - PIN9 (input pullup).
* PA10 - PIN10 (input pullup).
* PA11 - USB_DM (input floating).
* PA12 - USB_DP (input floating).
* PA13 - SWDIO (alternate 0).
* PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \
PIN_MODE_INPUT(GPIOA_PIN1) | \
PIN_MODE_INPUT(GPIOA_PIN2) | \
PIN_MODE_INPUT(GPIOA_PIN3) | \
PIN_MODE_INPUT(GPIOA_PIN4) | \
PIN_MODE_INPUT(GPIOA_PIN5) | \
PIN_MODE_INPUT(GPIOA_PIN6) | \
PIN_MODE_INPUT(GPIOA_PIN7) | \
PIN_MODE_INPUT(GPIOA_PIN8) | \
PIN_MODE_INPUT(GPIOA_PIN9) | \
PIN_MODE_INPUT(GPIOA_PIN10) | \
PIN_MODE_INPUT(GPIOA_USB_DM) | \
PIN_MODE_INPUT(GPIOA_USB_DP) | \
PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
PIN_MODE_INPUT(GPIOA_PIN15))
#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \
PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \
PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \
PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \
PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \
PIN_PUPDR_PULLUP(GPIOA_PIN1) | \
PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
PIN_PUPDR_PULLUP(GPIOA_PIN5) | \
PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
PIN_PUPDR_PULLUP(GPIOA_PIN7) | \
PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
PIN_PUPDR_PULLUP(GPIOA_PIN15))
#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \
PIN_ODR_HIGH(GPIOA_PIN1) | \
PIN_ODR_HIGH(GPIOA_PIN2) | \
PIN_ODR_HIGH(GPIOA_PIN3) | \
PIN_ODR_HIGH(GPIOA_PIN4) | \
PIN_ODR_HIGH(GPIOA_PIN5) | \
PIN_ODR_HIGH(GPIOA_PIN6) | \
PIN_ODR_HIGH(GPIOA_PIN7) | \
PIN_ODR_HIGH(GPIOA_PIN8) | \
PIN_ODR_HIGH(GPIOA_PIN9) | \
PIN_ODR_HIGH(GPIOA_PIN10) | \
PIN_ODR_HIGH(GPIOA_USB_DM) | \
PIN_ODR_HIGH(GPIOA_USB_DP) | \
PIN_ODR_HIGH(GPIOA_SWDIO) | \
PIN_ODR_HIGH(GPIOA_SWCLK) | \
PIN_ODR_HIGH(GPIOA_PIN15))
#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \
PIN_AFIO_AF(GPIOA_PIN1, 0U) | \
PIN_AFIO_AF(GPIOA_PIN2, 0U) | \
PIN_AFIO_AF(GPIOA_PIN3, 0U) | \
PIN_AFIO_AF(GPIOA_PIN4, 0U) | \
PIN_AFIO_AF(GPIOA_PIN5, 0U) | \
PIN_AFIO_AF(GPIOA_PIN6, 0U) | \
PIN_AFIO_AF(GPIOA_PIN7, 0U))
#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \
PIN_AFIO_AF(GPIOA_PIN9, 0U) | \
PIN_AFIO_AF(GPIOA_PIN10, 0U) | \
PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \
PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \
PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \
PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \
PIN_AFIO_AF(GPIOA_PIN15, 0U))
/*
* GPIOB setup:
*
* PB0 - PIN0 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - PIN3 (input pullup).
* PB4 - PIN4 (input pullup).
* PB5 - PIN5 (input pullup).
* PB6 - PIN6 (input pullup).
* PB7 - PIN7 (input pullup).
* PB8 - PIN8 (input pullup).
* PB9 - PIN9 (input pullup).
* PB10 - PIN10 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
* PB13 - SPI2_SCK (alternate 0).
* PB14 - SPI2_MISO (alternate 0).
* PB15 - SPI2_MOSI (alternate 0).
*/
#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_INPUT(GPIOB_PIN3) | \
PIN_MODE_INPUT(GPIOB_PIN4) | \
PIN_MODE_INPUT(GPIOB_PIN5) | \
PIN_MODE_INPUT(GPIOB_PIN6) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
PIN_MODE_INPUT(GPIOB_PIN8) | \
PIN_MODE_INPUT(GPIOB_PIN9) | \
PIN_MODE_INPUT(GPIOB_PIN10) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \
PIN_OSPEED_HIGH(GPIOB_PIN2) | \
PIN_OSPEED_HIGH(GPIOB_PIN3) | \
PIN_OSPEED_HIGH(GPIOB_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_PIN3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
PIN_PUPDR_PULLUP(GPIOB_PIN6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
PIN_ODR_HIGH(GPIOB_PIN1) | \
PIN_ODR_HIGH(GPIOB_PIN2) | \
PIN_ODR_HIGH(GPIOB_PIN3) | \
PIN_ODR_HIGH(GPIOB_PIN4) | \
PIN_ODR_HIGH(GPIOB_PIN5) | \
PIN_ODR_HIGH(GPIOB_PIN6) | \
PIN_ODR_HIGH(GPIOB_PIN7) | \
PIN_ODR_HIGH(GPIOB_PIN8) | \
PIN_ODR_HIGH(GPIOB_PIN9) | \
PIN_ODR_HIGH(GPIOB_PIN10) | \
PIN_ODR_HIGH(GPIOB_PIN11) | \
PIN_ODR_HIGH(GPIOB_PIN12) | \
PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \
PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \
PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \
PIN_AFIO_AF(GPIOB_PIN1, 0U) | \
PIN_AFIO_AF(GPIOB_PIN2, 0U) | \
PIN_AFIO_AF(GPIOB_PIN3, 0U) | \
PIN_AFIO_AF(GPIOB_PIN4, 0U) | \
PIN_AFIO_AF(GPIOB_PIN5, 0U) | \
PIN_AFIO_AF(GPIOB_PIN6, 0U) | \
PIN_AFIO_AF(GPIOB_PIN7, 0U))
#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \
PIN_AFIO_AF(GPIOB_PIN9, 0U) | \
PIN_AFIO_AF(GPIOB_PIN10, 0U) | \
PIN_AFIO_AF(GPIOB_PIN11, 0U) | \
PIN_AFIO_AF(GPIOB_PIN12, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
/*
* GPIOC setup:
*
* PC0 - MEMS_CS (output pushpull maximum).
* PC1 - PIN1 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
* PC5 - PIN5 (input pullup).
* PC6 - LED_RED (output pushpull maximum).
* PC7 - LED_BLUE (output pushpull maximum).
* PC8 - LED_ORANGE (output pushpull maximum).
* PC9 - LED_GREEN (output pushpull maximum).
* PC10 - PIN10 (input pullup).
* PC11 - PIN11 (input pullup).
* PC12 - PIN12 (input pullup).
* PC13 - PIN13 (input pullup).
* PC14 - OSC32_IN (input floating).
* PC15 - OSC32_OUT (input floating).
*/
#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \
PIN_MODE_INPUT(GPIOC_PIN1) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
PIN_MODE_INPUT(GPIOC_PIN5) | \
PIN_MODE_OUTPUT(GPIOC_LED_RED) | \
PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \
PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \
PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \
PIN_MODE_INPUT(GPIOC_PIN10) | \
PIN_MODE_INPUT(GPIOC_PIN11) | \
PIN_MODE_INPUT(GPIOC_PIN12) | \
PIN_MODE_INPUT(GPIOC_PIN13) | \
PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
PIN_MODE_INPUT(GPIOC_OSC32_OUT))
#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \
PIN_OSPEED_HIGH(GPIOC_LED_RED) | \
PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \
PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \
PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \
PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \
PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \
PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \
PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \
PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \
PIN_ODR_HIGH(GPIOC_PIN1) | \
PIN_ODR_HIGH(GPIOC_PIN2) | \
PIN_ODR_HIGH(GPIOC_PIN3) | \
PIN_ODR_HIGH(GPIOC_PIN4) | \
PIN_ODR_HIGH(GPIOC_PIN5) | \
PIN_ODR_LOW(GPIOC_LED_RED) | \
PIN_ODR_LOW(GPIOC_LED_BLUE) | \
PIN_ODR_LOW(GPIOC_LED_ORANGE) | \
PIN_ODR_LOW(GPIOC_LED_GREEN) | \
PIN_ODR_HIGH(GPIOC_PIN10) | \
PIN_ODR_HIGH(GPIOC_PIN11) | \
PIN_ODR_HIGH(GPIOC_PIN12) | \
PIN_ODR_HIGH(GPIOC_PIN13) | \
PIN_ODR_HIGH(GPIOC_OSC32_IN) | \
PIN_ODR_HIGH(GPIOC_OSC32_OUT))
#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \
PIN_AFIO_AF(GPIOC_PIN1, 0U) | \
PIN_AFIO_AF(GPIOC_PIN2, 0U) | \
PIN_AFIO_AF(GPIOC_PIN3, 0U) | \
PIN_AFIO_AF(GPIOC_PIN4, 0U) | \
PIN_AFIO_AF(GPIOC_PIN5, 0U) | \
PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \
PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \
PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \
PIN_AFIO_AF(GPIOC_PIN10, 0U) | \
PIN_AFIO_AF(GPIOC_PIN11, 0U) | \
PIN_AFIO_AF(GPIOC_PIN12, 0U) | \
PIN_AFIO_AF(GPIOC_PIN13, 0U) | \
PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \
PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
/*
* GPIOD setup:
*
* PD0 - PIN0 (input pullup).
* PD1 - PIN1 (input pullup).
* PD2 - PIN2 (input pullup).
* PD3 - PIN3 (input pullup).
* PD4 - PIN4 (input pullup).
* PD5 - PIN5 (input pullup).
* PD6 - PIN6 (input pullup).
* PD7 - PIN7 (input pullup).
* PD8 - PIN8 (input pullup).
* PD9 - PIN9 (input pullup).
* PD10 - PIN10 (input pullup).
* PD11 - PIN11 (input pullup).
* PD12 - PIN12 (input pullup).
* PD13 - PIN13 (input pullup).
* PD14 - PIN14 (input pullup).
* PD15 - PIN15 (input pullup).
*/
#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
PIN_MODE_INPUT(GPIOD_PIN1) | \
PIN_MODE_INPUT(GPIOD_PIN2) | \
PIN_MODE_INPUT(GPIOD_PIN3) | \
PIN_MODE_INPUT(GPIOD_PIN4) | \
PIN_MODE_INPUT(GPIOD_PIN5) | \
PIN_MODE_INPUT(GPIOD_PIN6) | \
PIN_MODE_INPUT(GPIOD_PIN7) | \
PIN_MODE_INPUT(GPIOD_PIN8) | \
PIN_MODE_INPUT(GPIOD_PIN9) | \
PIN_MODE_INPUT(GPIOD_PIN10) | \
PIN_MODE_INPUT(GPIOD_PIN11) | \
PIN_MODE_INPUT(GPIOD_PIN12) | \
PIN_MODE_INPUT(GPIOD_PIN13) | \
PIN_MODE_INPUT(GPIOD_PIN14) | \
PIN_MODE_INPUT(GPIOD_PIN15))
#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN15))
#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
PIN_PUPDR_PULLUP(GPIOD_PIN15))
#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
PIN_ODR_HIGH(GPIOD_PIN1) | \
PIN_ODR_HIGH(GPIOD_PIN2) | \
PIN_ODR_HIGH(GPIOD_PIN3) | \
PIN_ODR_HIGH(GPIOD_PIN4) | \
PIN_ODR_HIGH(GPIOD_PIN5) | \
PIN_ODR_HIGH(GPIOD_PIN6) | \
PIN_ODR_HIGH(GPIOD_PIN7) | \
PIN_ODR_HIGH(GPIOD_PIN8) | \
PIN_ODR_HIGH(GPIOD_PIN9) | \
PIN_ODR_HIGH(GPIOD_PIN10) | \
PIN_ODR_HIGH(GPIOD_PIN11) | \
PIN_ODR_HIGH(GPIOD_PIN12) | \
PIN_ODR_HIGH(GPIOD_PIN13) | \
PIN_ODR_HIGH(GPIOD_PIN14) | \
PIN_ODR_HIGH(GPIOD_PIN15))
#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \
PIN_AFIO_AF(GPIOD_PIN1, 0U) | \
PIN_AFIO_AF(GPIOD_PIN2, 0U) | \
PIN_AFIO_AF(GPIOD_PIN3, 0U) | \
PIN_AFIO_AF(GPIOD_PIN4, 0U) | \
PIN_AFIO_AF(GPIOD_PIN5, 0U) | \
PIN_AFIO_AF(GPIOD_PIN6, 0U) | \
PIN_AFIO_AF(GPIOD_PIN7, 0U))
#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \
PIN_AFIO_AF(GPIOD_PIN9, 0U) | \
PIN_AFIO_AF(GPIOD_PIN10, 0U) | \
PIN_AFIO_AF(GPIOD_PIN11, 0U) | \
PIN_AFIO_AF(GPIOD_PIN12, 0U) | \
PIN_AFIO_AF(GPIOD_PIN13, 0U) | \
PIN_AFIO_AF(GPIOD_PIN14, 0U) | \
PIN_AFIO_AF(GPIOD_PIN15, 0U))
/*
* GPIOE setup:
*
* PE0 - PIN0 (input pullup).
* PE1 - PIN1 (input pullup).
* PE2 - PIN2 (input pullup).
* PE3 - PIN3 (input pullup).
* PE4 - PIN4 (input pullup).
* PE5 - PIN5 (input pullup).
* PE6 - PIN6 (input pullup).
* PE7 - PIN7 (input pullup).
* PE8 - PIN8 (input pullup).
* PE9 - PIN9 (input pullup).
* PE10 - PIN10 (input pullup).
* PE11 - PIN11 (input pullup).
* PE12 - PIN12 (input pullup).
* PE13 - PIN13 (input pullup).
* PE14 - PIN14 (input pullup).
* PE15 - PIN15 (input pullup).
*/
#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
PIN_MODE_INPUT(GPIOE_PIN1) | \
PIN_MODE_INPUT(GPIOE_PIN2) | \
PIN_MODE_INPUT(GPIOE_PIN3) | \
PIN_MODE_INPUT(GPIOE_PIN4) | \
PIN_MODE_INPUT(GPIOE_PIN5) | \
PIN_MODE_INPUT(GPIOE_PIN6) | \
PIN_MODE_INPUT(GPIOE_PIN7) | \
PIN_MODE_INPUT(GPIOE_PIN8) | \
PIN_MODE_INPUT(GPIOE_PIN9) | \
PIN_MODE_INPUT(GPIOE_PIN10) | \
PIN_MODE_INPUT(GPIOE_PIN11) | \
PIN_MODE_INPUT(GPIOE_PIN12) | \
PIN_MODE_INPUT(GPIOE_PIN13) | \
PIN_MODE_INPUT(GPIOE_PIN14) | \
PIN_MODE_INPUT(GPIOE_PIN15))
#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN15))
#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
PIN_PUPDR_PULLUP(GPIOE_PIN2) | \
PIN_PUPDR_PULLUP(GPIOE_PIN3) | \
PIN_PUPDR_PULLUP(GPIOE_PIN4) | \
PIN_PUPDR_PULLUP(GPIOE_PIN5) | \
PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
PIN_PUPDR_PULLUP(GPIOE_PIN8) | \
PIN_PUPDR_PULLUP(GPIOE_PIN9) | \
PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
PIN_PUPDR_PULLUP(GPIOE_PIN11) | \
PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
PIN_PUPDR_PULLUP(GPIOE_PIN13) | \
PIN_PUPDR_PULLUP(GPIOE_PIN14) | \
PIN_PUPDR_PULLUP(GPIOE_PIN15))
#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
PIN_ODR_HIGH(GPIOE_PIN1) | \
PIN_ODR_HIGH(GPIOE_PIN2) | \
PIN_ODR_HIGH(GPIOE_PIN3) | \
PIN_ODR_HIGH(GPIOE_PIN4) | \
PIN_ODR_HIGH(GPIOE_PIN5) | \
PIN_ODR_HIGH(GPIOE_PIN6) | \
PIN_ODR_HIGH(GPIOE_PIN7) | \
PIN_ODR_HIGH(GPIOE_PIN8) | \
PIN_ODR_HIGH(GPIOE_PIN9) | \
PIN_ODR_HIGH(GPIOE_PIN10) | \
PIN_ODR_HIGH(GPIOE_PIN11) | \
PIN_ODR_HIGH(GPIOE_PIN12) | \
PIN_ODR_HIGH(GPIOE_PIN13) | \
PIN_ODR_HIGH(GPIOE_PIN14) | \
PIN_ODR_HIGH(GPIOE_PIN15))
#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \
PIN_AFIO_AF(GPIOE_PIN1, 0U) | \
PIN_AFIO_AF(GPIOE_PIN2, 0U) | \
PIN_AFIO_AF(GPIOE_PIN3, 0U) | \
PIN_AFIO_AF(GPIOE_PIN4, 0U) | \
PIN_AFIO_AF(GPIOE_PIN5, 0U) | \
PIN_AFIO_AF(GPIOE_PIN6, 0U) | \
PIN_AFIO_AF(GPIOE_PIN7, 0U))
#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \
PIN_AFIO_AF(GPIOE_PIN9, 0U) | \
PIN_AFIO_AF(GPIOE_PIN10, 0U) | \
PIN_AFIO_AF(GPIOE_PIN11, 0U) | \
PIN_AFIO_AF(GPIOE_PIN12, 0U) | \
PIN_AFIO_AF(GPIOE_PIN13, 0U) | \
PIN_AFIO_AF(GPIOE_PIN14, 0U) | \
PIN_AFIO_AF(GPIOE_PIN15, 0U))
/*
* GPIOF setup:
*
* PF0 - OSC_IN (input floating).
* PF1 - OSC_OUT (input floating).
* PF2 - PIN2 (input pullup).
* PF3 - PIN3 (input pullup).
* PF4 - PIN4 (input pullup).
* PF5 - PIN5 (input pullup).
* PF6 - PIN6 (input pullup).
* PF7 - PIN7 (input pullup).
* PF8 - PIN8 (input pullup).
* PF9 - PIN9 (input pullup).
* PF10 - PIN10 (input pullup).
* PF11 - PIN11 (input pullup).
* PF12 - PIN12 (input pullup).
* PF13 - PIN13 (input pullup).
* PF14 - PIN14 (input pullup).
* PF15 - PIN15 (input pullup).
*/
#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \
PIN_MODE_INPUT(GPIOF_OSC_OUT) | \
PIN_MODE_INPUT(GPIOF_PIN2) | \
PIN_MODE_INPUT(GPIOF_PIN3) | \
PIN_MODE_INPUT(GPIOF_PIN4) | \
PIN_MODE_INPUT(GPIOF_PIN5) | \
PIN_MODE_INPUT(GPIOF_PIN6) | \
PIN_MODE_INPUT(GPIOF_PIN7) | \
PIN_MODE_INPUT(GPIOF_PIN8) | \
PIN_MODE_INPUT(GPIOF_PIN9) | \
PIN_MODE_INPUT(GPIOF_PIN10) | \
PIN_MODE_INPUT(GPIOF_PIN11) | \
PIN_MODE_INPUT(GPIOF_PIN12) | \
PIN_MODE_INPUT(GPIOF_PIN13) | \
PIN_MODE_INPUT(GPIOF_PIN14) | \
PIN_MODE_INPUT(GPIOF_PIN15))
#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \
PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \
PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN15))
#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \
PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \
PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
PIN_PUPDR_PULLUP(GPIOF_PIN15))
#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \
PIN_ODR_HIGH(GPIOF_OSC_OUT) | \
PIN_ODR_HIGH(GPIOF_PIN2) | \
PIN_ODR_HIGH(GPIOF_PIN3) | \
PIN_ODR_HIGH(GPIOF_PIN4) | \
PIN_ODR_HIGH(GPIOF_PIN5) | \
PIN_ODR_HIGH(GPIOF_PIN6) | \
PIN_ODR_HIGH(GPIOF_PIN7) | \
PIN_ODR_HIGH(GPIOF_PIN8) | \
PIN_ODR_HIGH(GPIOF_PIN9) | \
PIN_ODR_HIGH(GPIOF_PIN10) | \
PIN_ODR_HIGH(GPIOF_PIN11) | \
PIN_ODR_HIGH(GPIOF_PIN12) | \
PIN_ODR_HIGH(GPIOF_PIN13) | \
PIN_ODR_HIGH(GPIOF_PIN14) | \
PIN_ODR_HIGH(GPIOF_PIN15))
#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \
PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \
PIN_AFIO_AF(GPIOF_PIN2, 0U) | \
PIN_AFIO_AF(GPIOF_PIN3, 0U) | \
PIN_AFIO_AF(GPIOF_PIN4, 0U) | \
PIN_AFIO_AF(GPIOF_PIN5, 0U) | \
PIN_AFIO_AF(GPIOF_PIN6, 0U) | \
PIN_AFIO_AF(GPIOF_PIN7, 0U))
#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \
PIN_AFIO_AF(GPIOF_PIN9, 0U) | \
PIN_AFIO_AF(GPIOF_PIN10, 0U) | \
PIN_AFIO_AF(GPIOF_PIN11, 0U) | \
PIN_AFIO_AF(GPIOF_PIN12, 0U) | \
PIN_AFIO_AF(GPIOF_PIN13, 0U) | \
PIN_AFIO_AF(GPIOF_PIN14, 0U) | \
PIN_AFIO_AF(GPIOF_PIN15, 0U))
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */
#endif /* BOARD_H */

View File

@ -1,5 +0,0 @@
# List of all the board related files.
BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
# Required include directories
BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

View File

@ -1,703 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<!-- STM32F0xx board Template -->
<board
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
<configuration_settings>
<templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
<output_path>..</output_path>
<hal_version>3.0.x</hal_version>
</configuration_settings>
<board_name>ST STM32F072B-Discovery</board_name>
<board_id>ST_STM32F072B_DISCOVERY</board_id>
<board_functions></board_functions>
<subtype>STM32F072xB</subtype>
<clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
LSEBypass="false" LSEDrive="3 High Drive (default)" />
<ports>
<GPIOA>
<pin0
ID="BUTTON"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID="USB_DM"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID="USB_DP"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID="SWDIO"
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin14
ID="SWCLK"
Type="PushPull"
Speed="Maximum"
Resistor="PullDown"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOA>
<GPIOB>
<pin0
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID="SPI2_SCK"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin14
ID="SPI2_MISO"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin15
ID="SPI2_MOSI"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
</GPIOB>
<GPIOC>
<pin0
ID="MEMS_CS"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Output"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID="LED_RED"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin7
ID="LED_BLUE"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin8
ID="LED_ORANGE"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" ></pin8>
<pin9
ID="LED_GREEN"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID="OSC32_IN"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID="OSC32_OUT"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOC>
<GPIOD>
<pin0
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOD>
<GPIOE>
<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
</GPIOE>
<GPIOF>
<pin0
ID="OSC_IN"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID="OSC_OUT"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOF>
</ports>
</board>

View File

@ -33,6 +33,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROW_PINS { B1, B0, A7, A5, A4 }
#define DIODE_DIRECTION COL2ROW
#define BACKLIGHT_PIN A6
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
#define BACKLIGHT_LEVELS 6
#define BACKLIGHT_BREATHING
#define BREATHING_PERIOD 6
@ -52,16 +56,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGB_DI_PIN B15
#define RGBLED_NUM 14
#define WS2812_SPI SPID2
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 1
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE
// Let VIA handle the QMK RGBLIGHT
#define VIA_QMK_RGBLIGHT_ENABLE
#define WS2812_SPI_MOSI_PAL_MODE 0
/*
* Feature disable options

View File

@ -1,16 +1,10 @@
# MCU name
MCU = STM32F072
BOARD = ST_STM32F072B_DISCOVERY
# Build Options
# comment out to disable the options.
#
# project specific files
VPATH += keyboards/cannonkeys/stm32f072
SRC = keyboard.c \
led.c
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
@ -19,7 +13,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
CUSTOM_MATRIX = no # Custom matrix file
# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = spi

View File

@ -1,268 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* This file has been automatically generated using ChibiStudio board
* generator plugin. Do not edit manually.
*/
#include "hal.h"
#include "stm32_gpio.h"
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/**
* @brief Type of STM32 GPIO port setup.
*/
typedef struct {
uint32_t moder;
uint32_t otyper;
uint32_t ospeedr;
uint32_t pupdr;
uint32_t odr;
uint32_t afrl;
uint32_t afrh;
} gpio_setup_t;
/**
* @brief Type of STM32 GPIO initialization data.
*/
typedef struct {
#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
gpio_setup_t PAData;
#endif
#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
gpio_setup_t PBData;
#endif
#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
gpio_setup_t PCData;
#endif
#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
gpio_setup_t PDData;
#endif
#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
gpio_setup_t PEData;
#endif
#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
gpio_setup_t PFData;
#endif
#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
gpio_setup_t PGData;
#endif
#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
gpio_setup_t PHData;
#endif
#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
gpio_setup_t PIData;
#endif
#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
gpio_setup_t PJData;
#endif
#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
gpio_setup_t PKData;
#endif
} gpio_config_t;
/**
* @brief STM32 GPIO static initialization data.
*/
static const gpio_config_t gpio_default_config = {
#if STM32_HAS_GPIOA
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
#endif
#if STM32_HAS_GPIOB
{VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
#endif
#if STM32_HAS_GPIOC
{VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
#endif
#if STM32_HAS_GPIOD
{VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
#endif
#if STM32_HAS_GPIOE
{VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
#endif
#if STM32_HAS_GPIOF
{VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
#endif
#if STM32_HAS_GPIOG
{VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
#endif
#if STM32_HAS_GPIOH
{VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
#endif
#if STM32_HAS_GPIOI
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH},
#endif
#if STM32_HAS_GPIOJ
{VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH},
#endif
#if STM32_HAS_GPIOK
{VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH}
#endif
};
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
gpiop->OTYPER = config->otyper;
gpiop->OSPEEDR = config->ospeedr;
gpiop->PUPDR = config->pupdr;
gpiop->ODR = config->odr;
gpiop->AFRL = config->afrl;
gpiop->AFRH = config->afrh;
gpiop->MODER = config->moder;
}
static void stm32_gpio_init(void) {
/* Enabling GPIO-related clocks, the mask comes from the
registry header file.*/
rccResetAHB(STM32_GPIO_EN_MASK);
rccEnableAHB(STM32_GPIO_EN_MASK, true);
/* Initializing all the defined GPIO ports.*/
#if STM32_HAS_GPIOA
gpio_init(GPIOA, &gpio_default_config.PAData);
#endif
#if STM32_HAS_GPIOB
gpio_init(GPIOB, &gpio_default_config.PBData);
#endif
#if STM32_HAS_GPIOC
gpio_init(GPIOC, &gpio_default_config.PCData);
#endif
#if STM32_HAS_GPIOD
gpio_init(GPIOD, &gpio_default_config.PDData);
#endif
#if STM32_HAS_GPIOE
gpio_init(GPIOE, &gpio_default_config.PEData);
#endif
#if STM32_HAS_GPIOF
gpio_init(GPIOF, &gpio_default_config.PFData);
#endif
#if STM32_HAS_GPIOG
gpio_init(GPIOG, &gpio_default_config.PGData);
#endif
#if STM32_HAS_GPIOH
gpio_init(GPIOH, &gpio_default_config.PHData);
#endif
#if STM32_HAS_GPIOI
gpio_init(GPIOI, &gpio_default_config.PIData);
#endif
#if STM32_HAS_GPIOJ
gpio_init(GPIOJ, &gpio_default_config.PJData);
#endif
#if STM32_HAS_GPIOK
gpio_init(GPIOK, &gpio_default_config.PKData);
#endif
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Early initialization code.
* @details GPIO ports and system clocks are initialized before everything
* else.
*/
void __early_init(void) {
extern void enter_bootloader_mode_if_requested(void);
enter_bootloader_mode_if_requested();
stm32_gpio_init();
stm32_clock_init();
}
#if HAL_USE_SDC || defined(__DOXYGEN__)
/**
* @brief SDC card detection.
*/
bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
(void)sdcp;
/* TODO: Fill the implementation.*/
return true;
}
/**
* @brief SDC card write protection detection.
*/
bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
(void)sdcp;
/* TODO: Fill the implementation.*/
return false;
}
#endif /* HAL_USE_SDC */
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
/**
* @brief MMC_SPI card detection.
*/
bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
(void)mmcp;
/* TODO: Fill the implementation.*/
return true;
}
/**
* @brief MMC_SPI card write protection detection.
*/
bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
(void)mmcp;
/* TODO: Fill the implementation.*/
return false;
}
#endif
/**
* @brief Board-specific initialization code.
* @todo Add your board-specific code, if any.
*/
void boardInit(void) {
SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP;
SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP);
}

View File

@ -1,940 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* This file has been automatically generated using ChibiStudio board
* generator plugin. Do not edit manually.
*/
#ifndef BOARD_H
#define BOARD_H
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/*
* Setup for ST STM32F072B-Discovery board.
*/
/*
* Board identifier.
*/
#define BOARD_ST_STM32F072B_DISCOVERY
#define BOARD_NAME "ST STM32F072B-Discovery"
/*
* Board oscillators-related settings.
* NOTE: HSE not fitted.
*/
#if !defined(STM32_LSECLK)
#define STM32_LSECLK 32768
#endif
#define STM32_LSEDRV (3U << 3U)
#if !defined(STM32_HSECLK)
#define STM32_HSECLK 0U
#endif
#define STM32_HSE_BYPASS
/*
* MCU type as defined in the ST header.
*/
#define STM32F072xB
/*
* IO pins assignments.
*/
#define GPIOA_BUTTON 0U
#define GPIOA_PIN1 1U
#define GPIOA_PIN2 2U
#define GPIOA_PIN3 3U
#define GPIOA_PIN4 4U
#define GPIOA_PIN5 5U
#define GPIOA_PIN6 6U
#define GPIOA_PIN7 7U
#define GPIOA_PIN8 8U
#define GPIOA_PIN9 9U
#define GPIOA_PIN10 10U
#define GPIOA_USB_DM 11U
#define GPIOA_USB_DP 12U
#define GPIOA_SWDIO 13U
#define GPIOA_SWCLK 14U
#define GPIOA_PIN15 15U
#define GPIOB_PIN0 0U
#define GPIOB_PIN1 1U
#define GPIOB_PIN2 2U
#define GPIOB_PIN3 3U
#define GPIOB_PIN4 4U
#define GPIOB_PIN5 5U
#define GPIOB_PIN6 6U
#define GPIOB_PIN7 7U
#define GPIOB_PIN8 8U
#define GPIOB_PIN9 9U
#define GPIOB_PIN10 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
#define GPIOB_SPI2_SCK 13U
#define GPIOB_SPI2_MISO 14U
#define GPIOB_SPI2_MOSI 15U
#define GPIOC_MEMS_CS 0U
#define GPIOC_PIN1 1U
#define GPIOC_PIN2 2U
#define GPIOC_PIN3 3U
#define GPIOC_PIN4 4U
#define GPIOC_PIN5 5U
#define GPIOC_LED_RED 6U
#define GPIOC_LED_BLUE 7U
#define GPIOC_LED_ORANGE 8U
#define GPIOC_LED_GREEN 9U
#define GPIOC_PIN10 10U
#define GPIOC_PIN11 11U
#define GPIOC_PIN12 12U
#define GPIOC_PIN13 13U
#define GPIOC_OSC32_IN 14U
#define GPIOC_OSC32_OUT 15U
#define GPIOD_PIN0 0U
#define GPIOD_PIN1 1U
#define GPIOD_PIN2 2U
#define GPIOD_PIN3 3U
#define GPIOD_PIN4 4U
#define GPIOD_PIN5 5U
#define GPIOD_PIN6 6U
#define GPIOD_PIN7 7U
#define GPIOD_PIN8 8U
#define GPIOD_PIN9 9U
#define GPIOD_PIN10 10U
#define GPIOD_PIN11 11U
#define GPIOD_PIN12 12U
#define GPIOD_PIN13 13U
#define GPIOD_PIN14 14U
#define GPIOD_PIN15 15U
#define GPIOE_PIN0 0U
#define GPIOE_PIN1 1U
#define GPIOE_PIN2 2U
#define GPIOE_PIN3 3U
#define GPIOE_PIN4 4U
#define GPIOE_PIN5 5U
#define GPIOE_PIN6 6U
#define GPIOE_PIN7 7U
#define GPIOE_PIN8 8U
#define GPIOE_PIN9 9U
#define GPIOE_PIN10 10U
#define GPIOE_PIN11 11U
#define GPIOE_PIN12 12U
#define GPIOE_PIN13 13U
#define GPIOE_PIN14 14U
#define GPIOE_PIN15 15U
#define GPIOF_OSC_IN 0U
#define GPIOF_OSC_OUT 1U
#define GPIOF_PIN2 2U
#define GPIOF_PIN3 3U
#define GPIOF_PIN4 4U
#define GPIOF_PIN5 5U
#define GPIOF_PIN6 6U
#define GPIOF_PIN7 7U
#define GPIOF_PIN8 8U
#define GPIOF_PIN9 9U
#define GPIOF_PIN10 10U
#define GPIOF_PIN11 11U
#define GPIOF_PIN12 12U
#define GPIOF_PIN13 13U
#define GPIOF_PIN14 14U
#define GPIOF_PIN15 15U
/*
* IO lines assignments.
*/
#define LINE_BUTTON PAL_LINE(GPIOA, 0U)
#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U)
#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U)
#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U)
#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U)
#define LINE_LED_RED PAL_LINE(GPIOC, 6U)
#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U)
#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U)
#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U)
#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U)
#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U)
#define LINE_OSC_IN PAL_LINE(GPIOF, 0U)
#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U)
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
* Please refer to the STM32 Reference Manual for details.
*/
#define PIN_MODE_INPUT(n) (0U << ((n) * 2U))
#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U))
#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U))
#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U))
#define PIN_ODR_LOW(n) (0U << (n))
#define PIN_ODR_HIGH(n) (1U << (n))
#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U))
#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U))
#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U))
#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U))
#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U))
#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U))
#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U))
#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
/*
* GPIOA setup:
*
* PA0 - BUTTON (input floating).
* PA1 - PIN1 (input pullup).
* PA2 - PIN2 (input pullup).
* PA3 - PIN3 (input pullup).
* PA4 - PIN4 (input pullup).
* PA5 - PIN5 (input pullup).
* PA6 - PIN6 (input pullup).
* PA7 - PIN7 (input pullup).
* PA8 - PIN8 (input pullup).
* PA9 - PIN9 (input pullup).
* PA10 - PIN10 (input pullup).
* PA11 - USB_DM (input floating).
* PA12 - USB_DP (input floating).
* PA13 - SWDIO (alternate 0).
* PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \
PIN_MODE_INPUT(GPIOA_PIN1) | \
PIN_MODE_INPUT(GPIOA_PIN2) | \
PIN_MODE_INPUT(GPIOA_PIN3) | \
PIN_MODE_INPUT(GPIOA_PIN4) | \
PIN_MODE_INPUT(GPIOA_PIN5) | \
PIN_MODE_INPUT(GPIOA_PIN6) | \
PIN_MODE_INPUT(GPIOA_PIN7) | \
PIN_MODE_INPUT(GPIOA_PIN8) | \
PIN_MODE_INPUT(GPIOA_PIN9) | \
PIN_MODE_INPUT(GPIOA_PIN10) | \
PIN_MODE_INPUT(GPIOA_USB_DM) | \
PIN_MODE_INPUT(GPIOA_USB_DP) | \
PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
PIN_MODE_INPUT(GPIOA_PIN15))
#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \
PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \
PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \
PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \
PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \
PIN_PUPDR_PULLUP(GPIOA_PIN1) | \
PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
PIN_PUPDR_PULLUP(GPIOA_PIN5) | \
PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
PIN_PUPDR_PULLUP(GPIOA_PIN7) | \
PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
PIN_PUPDR_PULLUP(GPIOA_PIN15))
#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \
PIN_ODR_HIGH(GPIOA_PIN1) | \
PIN_ODR_HIGH(GPIOA_PIN2) | \
PIN_ODR_HIGH(GPIOA_PIN3) | \
PIN_ODR_HIGH(GPIOA_PIN4) | \
PIN_ODR_HIGH(GPIOA_PIN5) | \
PIN_ODR_HIGH(GPIOA_PIN6) | \
PIN_ODR_HIGH(GPIOA_PIN7) | \
PIN_ODR_HIGH(GPIOA_PIN8) | \
PIN_ODR_HIGH(GPIOA_PIN9) | \
PIN_ODR_HIGH(GPIOA_PIN10) | \
PIN_ODR_HIGH(GPIOA_USB_DM) | \
PIN_ODR_HIGH(GPIOA_USB_DP) | \
PIN_ODR_HIGH(GPIOA_SWDIO) | \
PIN_ODR_HIGH(GPIOA_SWCLK) | \
PIN_ODR_HIGH(GPIOA_PIN15))
#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \
PIN_AFIO_AF(GPIOA_PIN1, 0U) | \
PIN_AFIO_AF(GPIOA_PIN2, 0U) | \
PIN_AFIO_AF(GPIOA_PIN3, 0U) | \
PIN_AFIO_AF(GPIOA_PIN4, 0U) | \
PIN_AFIO_AF(GPIOA_PIN5, 0U) | \
PIN_AFIO_AF(GPIOA_PIN6, 0U) | \
PIN_AFIO_AF(GPIOA_PIN7, 0U))
#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \
PIN_AFIO_AF(GPIOA_PIN9, 0U) | \
PIN_AFIO_AF(GPIOA_PIN10, 0U) | \
PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \
PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \
PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \
PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \
PIN_AFIO_AF(GPIOA_PIN15, 0U))
/*
* GPIOB setup:
*
* PB0 - PIN0 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - PIN3 (input pullup).
* PB4 - PIN4 (input pullup).
* PB5 - PIN5 (input pullup).
* PB6 - PIN6 (input pullup).
* PB7 - PIN7 (input pullup).
* PB8 - PIN8 (input pullup).
* PB9 - PIN9 (input pullup).
* PB10 - PIN10 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
* PB13 - SPI2_SCK (alternate 0).
* PB14 - SPI2_MISO (alternate 0).
* PB15 - SPI2_MOSI (alternate 0).
*/
#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_INPUT(GPIOB_PIN3) | \
PIN_MODE_INPUT(GPIOB_PIN4) | \
PIN_MODE_INPUT(GPIOB_PIN5) | \
PIN_MODE_INPUT(GPIOB_PIN6) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
PIN_MODE_INPUT(GPIOB_PIN8) | \
PIN_MODE_INPUT(GPIOB_PIN9) | \
PIN_MODE_INPUT(GPIOB_PIN10) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \
PIN_OSPEED_HIGH(GPIOB_PIN2) | \
PIN_OSPEED_HIGH(GPIOB_PIN3) | \
PIN_OSPEED_HIGH(GPIOB_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_PIN3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
PIN_PUPDR_PULLUP(GPIOB_PIN6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
PIN_ODR_HIGH(GPIOB_PIN1) | \
PIN_ODR_HIGH(GPIOB_PIN2) | \
PIN_ODR_HIGH(GPIOB_PIN3) | \
PIN_ODR_HIGH(GPIOB_PIN4) | \
PIN_ODR_HIGH(GPIOB_PIN5) | \
PIN_ODR_HIGH(GPIOB_PIN6) | \
PIN_ODR_HIGH(GPIOB_PIN7) | \
PIN_ODR_HIGH(GPIOB_PIN8) | \
PIN_ODR_HIGH(GPIOB_PIN9) | \
PIN_ODR_HIGH(GPIOB_PIN10) | \
PIN_ODR_HIGH(GPIOB_PIN11) | \
PIN_ODR_HIGH(GPIOB_PIN12) | \
PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \
PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \
PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \
PIN_AFIO_AF(GPIOB_PIN1, 0U) | \
PIN_AFIO_AF(GPIOB_PIN2, 0U) | \
PIN_AFIO_AF(GPIOB_PIN3, 0U) | \
PIN_AFIO_AF(GPIOB_PIN4, 0U) | \
PIN_AFIO_AF(GPIOB_PIN5, 0U) | \
PIN_AFIO_AF(GPIOB_PIN6, 0U) | \
PIN_AFIO_AF(GPIOB_PIN7, 0U))
#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \
PIN_AFIO_AF(GPIOB_PIN9, 0U) | \
PIN_AFIO_AF(GPIOB_PIN10, 0U) | \
PIN_AFIO_AF(GPIOB_PIN11, 0U) | \
PIN_AFIO_AF(GPIOB_PIN12, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
/*
* GPIOC setup:
*
* PC0 - MEMS_CS (output pushpull maximum).
* PC1 - PIN1 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
* PC5 - PIN5 (input pullup).
* PC6 - LED_RED (output pushpull maximum).
* PC7 - LED_BLUE (output pushpull maximum).
* PC8 - LED_ORANGE (output pushpull maximum).
* PC9 - LED_GREEN (output pushpull maximum).
* PC10 - PIN10 (input pullup).
* PC11 - PIN11 (input pullup).
* PC12 - PIN12 (input pullup).
* PC13 - PIN13 (input pullup).
* PC14 - OSC32_IN (input floating).
* PC15 - OSC32_OUT (input floating).
*/
#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \
PIN_MODE_INPUT(GPIOC_PIN1) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
PIN_MODE_INPUT(GPIOC_PIN5) | \
PIN_MODE_OUTPUT(GPIOC_LED_RED) | \
PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \
PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \
PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \
PIN_MODE_INPUT(GPIOC_PIN10) | \
PIN_MODE_INPUT(GPIOC_PIN11) | \
PIN_MODE_INPUT(GPIOC_PIN12) | \
PIN_MODE_INPUT(GPIOC_PIN13) | \
PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
PIN_MODE_INPUT(GPIOC_OSC32_OUT))
#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \
PIN_OSPEED_HIGH(GPIOC_LED_RED) | \
PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \
PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \
PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \
PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \
PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \
PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \
PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \
PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \
PIN_ODR_HIGH(GPIOC_PIN1) | \
PIN_ODR_HIGH(GPIOC_PIN2) | \
PIN_ODR_HIGH(GPIOC_PIN3) | \
PIN_ODR_HIGH(GPIOC_PIN4) | \
PIN_ODR_HIGH(GPIOC_PIN5) | \
PIN_ODR_LOW(GPIOC_LED_RED) | \
PIN_ODR_LOW(GPIOC_LED_BLUE) | \
PIN_ODR_LOW(GPIOC_LED_ORANGE) | \
PIN_ODR_LOW(GPIOC_LED_GREEN) | \
PIN_ODR_HIGH(GPIOC_PIN10) | \
PIN_ODR_HIGH(GPIOC_PIN11) | \
PIN_ODR_HIGH(GPIOC_PIN12) | \
PIN_ODR_HIGH(GPIOC_PIN13) | \
PIN_ODR_HIGH(GPIOC_OSC32_IN) | \
PIN_ODR_HIGH(GPIOC_OSC32_OUT))
#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \
PIN_AFIO_AF(GPIOC_PIN1, 0U) | \
PIN_AFIO_AF(GPIOC_PIN2, 0U) | \
PIN_AFIO_AF(GPIOC_PIN3, 0U) | \
PIN_AFIO_AF(GPIOC_PIN4, 0U) | \
PIN_AFIO_AF(GPIOC_PIN5, 0U) | \
PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \
PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \
PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \
PIN_AFIO_AF(GPIOC_PIN10, 0U) | \
PIN_AFIO_AF(GPIOC_PIN11, 0U) | \
PIN_AFIO_AF(GPIOC_PIN12, 0U) | \
PIN_AFIO_AF(GPIOC_PIN13, 0U) | \
PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \
PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
/*
* GPIOD setup:
*
* PD0 - PIN0 (input pullup).
* PD1 - PIN1 (input pullup).
* PD2 - PIN2 (input pullup).
* PD3 - PIN3 (input pullup).
* PD4 - PIN4 (input pullup).
* PD5 - PIN5 (input pullup).
* PD6 - PIN6 (input pullup).
* PD7 - PIN7 (input pullup).
* PD8 - PIN8 (input pullup).
* PD9 - PIN9 (input pullup).
* PD10 - PIN10 (input pullup).
* PD11 - PIN11 (input pullup).
* PD12 - PIN12 (input pullup).
* PD13 - PIN13 (input pullup).
* PD14 - PIN14 (input pullup).
* PD15 - PIN15 (input pullup).
*/
#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
PIN_MODE_INPUT(GPIOD_PIN1) | \
PIN_MODE_INPUT(GPIOD_PIN2) | \
PIN_MODE_INPUT(GPIOD_PIN3) | \
PIN_MODE_INPUT(GPIOD_PIN4) | \
PIN_MODE_INPUT(GPIOD_PIN5) | \
PIN_MODE_INPUT(GPIOD_PIN6) | \
PIN_MODE_INPUT(GPIOD_PIN7) | \
PIN_MODE_INPUT(GPIOD_PIN8) | \
PIN_MODE_INPUT(GPIOD_PIN9) | \
PIN_MODE_INPUT(GPIOD_PIN10) | \
PIN_MODE_INPUT(GPIOD_PIN11) | \
PIN_MODE_INPUT(GPIOD_PIN12) | \
PIN_MODE_INPUT(GPIOD_PIN13) | \
PIN_MODE_INPUT(GPIOD_PIN14) | \
PIN_MODE_INPUT(GPIOD_PIN15))
#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN15))
#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
PIN_PUPDR_PULLUP(GPIOD_PIN15))
#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
PIN_ODR_HIGH(GPIOD_PIN1) | \
PIN_ODR_HIGH(GPIOD_PIN2) | \
PIN_ODR_HIGH(GPIOD_PIN3) | \
PIN_ODR_HIGH(GPIOD_PIN4) | \
PIN_ODR_HIGH(GPIOD_PIN5) | \
PIN_ODR_HIGH(GPIOD_PIN6) | \
PIN_ODR_HIGH(GPIOD_PIN7) | \
PIN_ODR_HIGH(GPIOD_PIN8) | \
PIN_ODR_HIGH(GPIOD_PIN9) | \
PIN_ODR_HIGH(GPIOD_PIN10) | \
PIN_ODR_HIGH(GPIOD_PIN11) | \
PIN_ODR_HIGH(GPIOD_PIN12) | \
PIN_ODR_HIGH(GPIOD_PIN13) | \
PIN_ODR_HIGH(GPIOD_PIN14) | \
PIN_ODR_HIGH(GPIOD_PIN15))
#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \
PIN_AFIO_AF(GPIOD_PIN1, 0U) | \
PIN_AFIO_AF(GPIOD_PIN2, 0U) | \
PIN_AFIO_AF(GPIOD_PIN3, 0U) | \
PIN_AFIO_AF(GPIOD_PIN4, 0U) | \
PIN_AFIO_AF(GPIOD_PIN5, 0U) | \
PIN_AFIO_AF(GPIOD_PIN6, 0U) | \
PIN_AFIO_AF(GPIOD_PIN7, 0U))
#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \
PIN_AFIO_AF(GPIOD_PIN9, 0U) | \
PIN_AFIO_AF(GPIOD_PIN10, 0U) | \
PIN_AFIO_AF(GPIOD_PIN11, 0U) | \
PIN_AFIO_AF(GPIOD_PIN12, 0U) | \
PIN_AFIO_AF(GPIOD_PIN13, 0U) | \
PIN_AFIO_AF(GPIOD_PIN14, 0U) | \
PIN_AFIO_AF(GPIOD_PIN15, 0U))
/*
* GPIOE setup:
*
* PE0 - PIN0 (input pullup).
* PE1 - PIN1 (input pullup).
* PE2 - PIN2 (input pullup).
* PE3 - PIN3 (input pullup).
* PE4 - PIN4 (input pullup).
* PE5 - PIN5 (input pullup).
* PE6 - PIN6 (input pullup).
* PE7 - PIN7 (input pullup).
* PE8 - PIN8 (input pullup).
* PE9 - PIN9 (input pullup).
* PE10 - PIN10 (input pullup).
* PE11 - PIN11 (input pullup).
* PE12 - PIN12 (input pullup).
* PE13 - PIN13 (input pullup).
* PE14 - PIN14 (input pullup).
* PE15 - PIN15 (input pullup).
*/
#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
PIN_MODE_INPUT(GPIOE_PIN1) | \
PIN_MODE_INPUT(GPIOE_PIN2) | \
PIN_MODE_INPUT(GPIOE_PIN3) | \
PIN_MODE_INPUT(GPIOE_PIN4) | \
PIN_MODE_INPUT(GPIOE_PIN5) | \
PIN_MODE_INPUT(GPIOE_PIN6) | \
PIN_MODE_INPUT(GPIOE_PIN7) | \
PIN_MODE_INPUT(GPIOE_PIN8) | \
PIN_MODE_INPUT(GPIOE_PIN9) | \
PIN_MODE_INPUT(GPIOE_PIN10) | \
PIN_MODE_INPUT(GPIOE_PIN11) | \
PIN_MODE_INPUT(GPIOE_PIN12) | \
PIN_MODE_INPUT(GPIOE_PIN13) | \
PIN_MODE_INPUT(GPIOE_PIN14) | \
PIN_MODE_INPUT(GPIOE_PIN15))
#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN15))
#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
PIN_PUPDR_PULLUP(GPIOE_PIN2) | \
PIN_PUPDR_PULLUP(GPIOE_PIN3) | \
PIN_PUPDR_PULLUP(GPIOE_PIN4) | \
PIN_PUPDR_PULLUP(GPIOE_PIN5) | \
PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
PIN_PUPDR_PULLUP(GPIOE_PIN8) | \
PIN_PUPDR_PULLUP(GPIOE_PIN9) | \
PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
PIN_PUPDR_PULLUP(GPIOE_PIN11) | \
PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
PIN_PUPDR_PULLUP(GPIOE_PIN13) | \
PIN_PUPDR_PULLUP(GPIOE_PIN14) | \
PIN_PUPDR_PULLUP(GPIOE_PIN15))
#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
PIN_ODR_HIGH(GPIOE_PIN1) | \
PIN_ODR_HIGH(GPIOE_PIN2) | \
PIN_ODR_HIGH(GPIOE_PIN3) | \
PIN_ODR_HIGH(GPIOE_PIN4) | \
PIN_ODR_HIGH(GPIOE_PIN5) | \
PIN_ODR_HIGH(GPIOE_PIN6) | \
PIN_ODR_HIGH(GPIOE_PIN7) | \
PIN_ODR_HIGH(GPIOE_PIN8) | \
PIN_ODR_HIGH(GPIOE_PIN9) | \
PIN_ODR_HIGH(GPIOE_PIN10) | \
PIN_ODR_HIGH(GPIOE_PIN11) | \
PIN_ODR_HIGH(GPIOE_PIN12) | \
PIN_ODR_HIGH(GPIOE_PIN13) | \
PIN_ODR_HIGH(GPIOE_PIN14) | \
PIN_ODR_HIGH(GPIOE_PIN15))
#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \
PIN_AFIO_AF(GPIOE_PIN1, 0U) | \
PIN_AFIO_AF(GPIOE_PIN2, 0U) | \
PIN_AFIO_AF(GPIOE_PIN3, 0U) | \
PIN_AFIO_AF(GPIOE_PIN4, 0U) | \
PIN_AFIO_AF(GPIOE_PIN5, 0U) | \
PIN_AFIO_AF(GPIOE_PIN6, 0U) | \
PIN_AFIO_AF(GPIOE_PIN7, 0U))
#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \
PIN_AFIO_AF(GPIOE_PIN9, 0U) | \
PIN_AFIO_AF(GPIOE_PIN10, 0U) | \
PIN_AFIO_AF(GPIOE_PIN11, 0U) | \
PIN_AFIO_AF(GPIOE_PIN12, 0U) | \
PIN_AFIO_AF(GPIOE_PIN13, 0U) | \
PIN_AFIO_AF(GPIOE_PIN14, 0U) | \
PIN_AFIO_AF(GPIOE_PIN15, 0U))
/*
* GPIOF setup:
*
* PF0 - OSC_IN (input floating).
* PF1 - OSC_OUT (input floating).
* PF2 - PIN2 (input pullup).
* PF3 - PIN3 (input pullup).
* PF4 - PIN4 (input pullup).
* PF5 - PIN5 (input pullup).
* PF6 - PIN6 (input pullup).
* PF7 - PIN7 (input pullup).
* PF8 - PIN8 (input pullup).
* PF9 - PIN9 (input pullup).
* PF10 - PIN10 (input pullup).
* PF11 - PIN11 (input pullup).
* PF12 - PIN12 (input pullup).
* PF13 - PIN13 (input pullup).
* PF14 - PIN14 (input pullup).
* PF15 - PIN15 (input pullup).
*/
#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \
PIN_MODE_INPUT(GPIOF_OSC_OUT) | \
PIN_MODE_INPUT(GPIOF_PIN2) | \
PIN_MODE_INPUT(GPIOF_PIN3) | \
PIN_MODE_INPUT(GPIOF_PIN4) | \
PIN_MODE_INPUT(GPIOF_PIN5) | \
PIN_MODE_INPUT(GPIOF_PIN6) | \
PIN_MODE_INPUT(GPIOF_PIN7) | \
PIN_MODE_INPUT(GPIOF_PIN8) | \
PIN_MODE_INPUT(GPIOF_PIN9) | \
PIN_MODE_INPUT(GPIOF_PIN10) | \
PIN_MODE_INPUT(GPIOF_PIN11) | \
PIN_MODE_INPUT(GPIOF_PIN12) | \
PIN_MODE_INPUT(GPIOF_PIN13) | \
PIN_MODE_INPUT(GPIOF_PIN14) | \
PIN_MODE_INPUT(GPIOF_PIN15))
#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \
PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \
PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN15))
#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \
PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \
PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
PIN_PUPDR_PULLUP(GPIOF_PIN15))
#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \
PIN_ODR_HIGH(GPIOF_OSC_OUT) | \
PIN_ODR_HIGH(GPIOF_PIN2) | \
PIN_ODR_HIGH(GPIOF_PIN3) | \
PIN_ODR_HIGH(GPIOF_PIN4) | \
PIN_ODR_HIGH(GPIOF_PIN5) | \
PIN_ODR_HIGH(GPIOF_PIN6) | \
PIN_ODR_HIGH(GPIOF_PIN7) | \
PIN_ODR_HIGH(GPIOF_PIN8) | \
PIN_ODR_HIGH(GPIOF_PIN9) | \
PIN_ODR_HIGH(GPIOF_PIN10) | \
PIN_ODR_HIGH(GPIOF_PIN11) | \
PIN_ODR_HIGH(GPIOF_PIN12) | \
PIN_ODR_HIGH(GPIOF_PIN13) | \
PIN_ODR_HIGH(GPIOF_PIN14) | \
PIN_ODR_HIGH(GPIOF_PIN15))
#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \
PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \
PIN_AFIO_AF(GPIOF_PIN2, 0U) | \
PIN_AFIO_AF(GPIOF_PIN3, 0U) | \
PIN_AFIO_AF(GPIOF_PIN4, 0U) | \
PIN_AFIO_AF(GPIOF_PIN5, 0U) | \
PIN_AFIO_AF(GPIOF_PIN6, 0U) | \
PIN_AFIO_AF(GPIOF_PIN7, 0U))
#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \
PIN_AFIO_AF(GPIOF_PIN9, 0U) | \
PIN_AFIO_AF(GPIOF_PIN10, 0U) | \
PIN_AFIO_AF(GPIOF_PIN11, 0U) | \
PIN_AFIO_AF(GPIOF_PIN12, 0U) | \
PIN_AFIO_AF(GPIOF_PIN13, 0U) | \
PIN_AFIO_AF(GPIOF_PIN14, 0U) | \
PIN_AFIO_AF(GPIOF_PIN15, 0U))
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */
#endif /* BOARD_H */

View File

@ -1,5 +0,0 @@
# List of all the board related files.
BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
# Required include directories
BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

View File

@ -1,703 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<!-- STM32F0xx board Template -->
<board
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
<configuration_settings>
<templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
<output_path>..</output_path>
<hal_version>3.0.x</hal_version>
</configuration_settings>
<board_name>ST STM32F072B-Discovery</board_name>
<board_id>ST_STM32F072B_DISCOVERY</board_id>
<board_functions></board_functions>
<subtype>STM32F072xB</subtype>
<clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
LSEBypass="false" LSEDrive="3 High Drive (default)" />
<ports>
<GPIOA>
<pin0
ID="BUTTON"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID="USB_DM"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID="USB_DP"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID="SWDIO"
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin14
ID="SWCLK"
Type="PushPull"
Speed="Maximum"
Resistor="PullDown"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOA>
<GPIOB>
<pin0
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID="SPI2_SCK"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin14
ID="SPI2_MISO"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin15
ID="SPI2_MOSI"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
</GPIOB>
<GPIOC>
<pin0
ID="MEMS_CS"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Output"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID="LED_RED"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin7
ID="LED_BLUE"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin8
ID="LED_ORANGE"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" ></pin8>
<pin9
ID="LED_GREEN"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID="OSC32_IN"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID="OSC32_OUT"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOC>
<GPIOD>
<pin0
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOD>
<GPIOE>
<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
</GPIOE>
<GPIOF>
<pin0
ID="OSC_IN"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID="OSC_OUT"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOF>
</ports>
</board>

View File

@ -33,6 +33,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROW_PINS { B12, B13, B14, B15, A1 }
#define DIODE_DIRECTION COL2ROW
#define BACKLIGHT_PIN A6
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
#define BACKLIGHT_LEVELS 6
#define BACKLIGHT_BREATHING
#define BREATHING_PERIOD 6
@ -48,12 +52,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 1
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE
/*
* Feature disable options

View File

@ -1,16 +1,9 @@
# MCU name
MCU = STM32F072
BOARD = ST_STM32F072B_DISCOVERY
# Build Options
# comment out to disable the options.
#
# project specific files
VPATH += keyboards/cannonkeys/stm32f072
SRC = keyboard.c \
led.c
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
@ -19,7 +12,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
CUSTOM_MATRIX = no # Custom matrix file
# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = no

View File

@ -10,7 +10,7 @@ SRC += led.c \
satisfaction_encoder.c \
satisfaction_oled.c
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug

View File

@ -1,268 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* This file has been automatically generated using ChibiStudio board
* generator plugin. Do not edit manually.
*/
#include "hal.h"
#include "stm32_gpio.h"
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/**
* @brief Type of STM32 GPIO port setup.
*/
typedef struct {
uint32_t moder;
uint32_t otyper;
uint32_t ospeedr;
uint32_t pupdr;
uint32_t odr;
uint32_t afrl;
uint32_t afrh;
} gpio_setup_t;
/**
* @brief Type of STM32 GPIO initialization data.
*/
typedef struct {
#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
gpio_setup_t PAData;
#endif
#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
gpio_setup_t PBData;
#endif
#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
gpio_setup_t PCData;
#endif
#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
gpio_setup_t PDData;
#endif
#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
gpio_setup_t PEData;
#endif
#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
gpio_setup_t PFData;
#endif
#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
gpio_setup_t PGData;
#endif
#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
gpio_setup_t PHData;
#endif
#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
gpio_setup_t PIData;
#endif
#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
gpio_setup_t PJData;
#endif
#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
gpio_setup_t PKData;
#endif
} gpio_config_t;
/**
* @brief STM32 GPIO static initialization data.
*/
static const gpio_config_t gpio_default_config = {
#if STM32_HAS_GPIOA
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
#endif
#if STM32_HAS_GPIOB
{VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
#endif
#if STM32_HAS_GPIOC
{VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
#endif
#if STM32_HAS_GPIOD
{VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
#endif
#if STM32_HAS_GPIOE
{VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
#endif
#if STM32_HAS_GPIOF
{VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
#endif
#if STM32_HAS_GPIOG
{VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
#endif
#if STM32_HAS_GPIOH
{VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
#endif
#if STM32_HAS_GPIOI
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH},
#endif
#if STM32_HAS_GPIOJ
{VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH},
#endif
#if STM32_HAS_GPIOK
{VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH}
#endif
};
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
gpiop->OTYPER = config->otyper;
gpiop->OSPEEDR = config->ospeedr;
gpiop->PUPDR = config->pupdr;
gpiop->ODR = config->odr;
gpiop->AFRL = config->afrl;
gpiop->AFRH = config->afrh;
gpiop->MODER = config->moder;
}
static void stm32_gpio_init(void) {
/* Enabling GPIO-related clocks, the mask comes from the
registry header file.*/
rccResetAHB(STM32_GPIO_EN_MASK);
rccEnableAHB(STM32_GPIO_EN_MASK, true);
/* Initializing all the defined GPIO ports.*/
#if STM32_HAS_GPIOA
gpio_init(GPIOA, &gpio_default_config.PAData);
#endif
#if STM32_HAS_GPIOB
gpio_init(GPIOB, &gpio_default_config.PBData);
#endif
#if STM32_HAS_GPIOC
gpio_init(GPIOC, &gpio_default_config.PCData);
#endif
#if STM32_HAS_GPIOD
gpio_init(GPIOD, &gpio_default_config.PDData);
#endif
#if STM32_HAS_GPIOE
gpio_init(GPIOE, &gpio_default_config.PEData);
#endif
#if STM32_HAS_GPIOF
gpio_init(GPIOF, &gpio_default_config.PFData);
#endif
#if STM32_HAS_GPIOG
gpio_init(GPIOG, &gpio_default_config.PGData);
#endif
#if STM32_HAS_GPIOH
gpio_init(GPIOH, &gpio_default_config.PHData);
#endif
#if STM32_HAS_GPIOI
gpio_init(GPIOI, &gpio_default_config.PIData);
#endif
#if STM32_HAS_GPIOJ
gpio_init(GPIOJ, &gpio_default_config.PJData);
#endif
#if STM32_HAS_GPIOK
gpio_init(GPIOK, &gpio_default_config.PKData);
#endif
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Early initialization code.
* @details GPIO ports and system clocks are initialized before everything
* else.
*/
void __early_init(void) {
extern void enter_bootloader_mode_if_requested(void);
enter_bootloader_mode_if_requested();
stm32_gpio_init();
stm32_clock_init();
}
#if HAL_USE_SDC || defined(__DOXYGEN__)
/**
* @brief SDC card detection.
*/
bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
(void)sdcp;
/* TODO: Fill the implementation.*/
return true;
}
/**
* @brief SDC card write protection detection.
*/
bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
(void)sdcp;
/* TODO: Fill the implementation.*/
return false;
}
#endif /* HAL_USE_SDC */
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
/**
* @brief MMC_SPI card detection.
*/
bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
(void)mmcp;
/* TODO: Fill the implementation.*/
return true;
}
/**
* @brief MMC_SPI card write protection detection.
*/
bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
(void)mmcp;
/* TODO: Fill the implementation.*/
return false;
}
#endif
/**
* @brief Board-specific initialization code.
* @todo Add your board-specific code, if any.
*/
void boardInit(void) {
SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP;
SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP);
}

View File

@ -1,940 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* This file has been automatically generated using ChibiStudio board
* generator plugin. Do not edit manually.
*/
#ifndef BOARD_H
#define BOARD_H
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/*
* Setup for ST STM32F072B-Discovery board.
*/
/*
* Board identifier.
*/
#define BOARD_ST_STM32F072B_DISCOVERY
#define BOARD_NAME "ST STM32F072B-Discovery"
/*
* Board oscillators-related settings.
* NOTE: HSE not fitted.
*/
#if !defined(STM32_LSECLK)
#define STM32_LSECLK 32768
#endif
#define STM32_LSEDRV (3U << 3U)
#if !defined(STM32_HSECLK)
#define STM32_HSECLK 0U
#endif
#define STM32_HSE_BYPASS
/*
* MCU type as defined in the ST header.
*/
#define STM32F072xB
/*
* IO pins assignments.
*/
#define GPIOA_BUTTON 0U
#define GPIOA_PIN1 1U
#define GPIOA_PIN2 2U
#define GPIOA_PIN3 3U
#define GPIOA_PIN4 4U
#define GPIOA_PIN5 5U
#define GPIOA_PIN6 6U
#define GPIOA_PIN7 7U
#define GPIOA_PIN8 8U
#define GPIOA_PIN9 9U
#define GPIOA_PIN10 10U
#define GPIOA_USB_DM 11U
#define GPIOA_USB_DP 12U
#define GPIOA_SWDIO 13U
#define GPIOA_SWCLK 14U
#define GPIOA_PIN15 15U
#define GPIOB_PIN0 0U
#define GPIOB_PIN1 1U
#define GPIOB_PIN2 2U
#define GPIOB_PIN3 3U
#define GPIOB_PIN4 4U
#define GPIOB_PIN5 5U
#define GPIOB_PIN6 6U
#define GPIOB_PIN7 7U
#define GPIOB_PIN8 8U
#define GPIOB_PIN9 9U
#define GPIOB_PIN10 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
#define GPIOB_SPI2_SCK 13U
#define GPIOB_SPI2_MISO 14U
#define GPIOB_SPI2_MOSI 15U
#define GPIOC_MEMS_CS 0U
#define GPIOC_PIN1 1U
#define GPIOC_PIN2 2U
#define GPIOC_PIN3 3U
#define GPIOC_PIN4 4U
#define GPIOC_PIN5 5U
#define GPIOC_LED_RED 6U
#define GPIOC_LED_BLUE 7U
#define GPIOC_LED_ORANGE 8U
#define GPIOC_LED_GREEN 9U
#define GPIOC_PIN10 10U
#define GPIOC_PIN11 11U
#define GPIOC_PIN12 12U
#define GPIOC_PIN13 13U
#define GPIOC_OSC32_IN 14U
#define GPIOC_OSC32_OUT 15U
#define GPIOD_PIN0 0U
#define GPIOD_PIN1 1U
#define GPIOD_PIN2 2U
#define GPIOD_PIN3 3U
#define GPIOD_PIN4 4U
#define GPIOD_PIN5 5U
#define GPIOD_PIN6 6U
#define GPIOD_PIN7 7U
#define GPIOD_PIN8 8U
#define GPIOD_PIN9 9U
#define GPIOD_PIN10 10U
#define GPIOD_PIN11 11U
#define GPIOD_PIN12 12U
#define GPIOD_PIN13 13U
#define GPIOD_PIN14 14U
#define GPIOD_PIN15 15U
#define GPIOE_PIN0 0U
#define GPIOE_PIN1 1U
#define GPIOE_PIN2 2U
#define GPIOE_PIN3 3U
#define GPIOE_PIN4 4U
#define GPIOE_PIN5 5U
#define GPIOE_PIN6 6U
#define GPIOE_PIN7 7U
#define GPIOE_PIN8 8U
#define GPIOE_PIN9 9U
#define GPIOE_PIN10 10U
#define GPIOE_PIN11 11U
#define GPIOE_PIN12 12U
#define GPIOE_PIN13 13U
#define GPIOE_PIN14 14U
#define GPIOE_PIN15 15U
#define GPIOF_OSC_IN 0U
#define GPIOF_OSC_OUT 1U
#define GPIOF_PIN2 2U
#define GPIOF_PIN3 3U
#define GPIOF_PIN4 4U
#define GPIOF_PIN5 5U
#define GPIOF_PIN6 6U
#define GPIOF_PIN7 7U
#define GPIOF_PIN8 8U
#define GPIOF_PIN9 9U
#define GPIOF_PIN10 10U
#define GPIOF_PIN11 11U
#define GPIOF_PIN12 12U
#define GPIOF_PIN13 13U
#define GPIOF_PIN14 14U
#define GPIOF_PIN15 15U
/*
* IO lines assignments.
*/
#define LINE_BUTTON PAL_LINE(GPIOA, 0U)
#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U)
#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U)
#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U)
#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U)
#define LINE_LED_RED PAL_LINE(GPIOC, 6U)
#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U)
#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U)
#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U)
#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U)
#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U)
#define LINE_OSC_IN PAL_LINE(GPIOF, 0U)
#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U)
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
* Please refer to the STM32 Reference Manual for details.
*/
#define PIN_MODE_INPUT(n) (0U << ((n) * 2U))
#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U))
#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U))
#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U))
#define PIN_ODR_LOW(n) (0U << (n))
#define PIN_ODR_HIGH(n) (1U << (n))
#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U))
#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U))
#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U))
#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U))
#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U))
#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U))
#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U))
#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
/*
* GPIOA setup:
*
* PA0 - BUTTON (input floating).
* PA1 - PIN1 (input pullup).
* PA2 - PIN2 (input pullup).
* PA3 - PIN3 (input pullup).
* PA4 - PIN4 (input pullup).
* PA5 - PIN5 (input pullup).
* PA6 - PIN6 (input pullup).
* PA7 - PIN7 (input pullup).
* PA8 - PIN8 (input pullup).
* PA9 - PIN9 (input pullup).
* PA10 - PIN10 (input pullup).
* PA11 - USB_DM (input floating).
* PA12 - USB_DP (input floating).
* PA13 - SWDIO (alternate 0).
* PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \
PIN_MODE_INPUT(GPIOA_PIN1) | \
PIN_MODE_INPUT(GPIOA_PIN2) | \
PIN_MODE_INPUT(GPIOA_PIN3) | \
PIN_MODE_INPUT(GPIOA_PIN4) | \
PIN_MODE_INPUT(GPIOA_PIN5) | \
PIN_MODE_INPUT(GPIOA_PIN6) | \
PIN_MODE_INPUT(GPIOA_PIN7) | \
PIN_MODE_INPUT(GPIOA_PIN8) | \
PIN_MODE_INPUT(GPIOA_PIN9) | \
PIN_MODE_INPUT(GPIOA_PIN10) | \
PIN_MODE_INPUT(GPIOA_USB_DM) | \
PIN_MODE_INPUT(GPIOA_USB_DP) | \
PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
PIN_MODE_INPUT(GPIOA_PIN15))
#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \
PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \
PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \
PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \
PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \
PIN_PUPDR_PULLUP(GPIOA_PIN1) | \
PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
PIN_PUPDR_PULLUP(GPIOA_PIN5) | \
PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
PIN_PUPDR_PULLUP(GPIOA_PIN7) | \
PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
PIN_PUPDR_PULLUP(GPIOA_PIN15))
#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \
PIN_ODR_HIGH(GPIOA_PIN1) | \
PIN_ODR_HIGH(GPIOA_PIN2) | \
PIN_ODR_HIGH(GPIOA_PIN3) | \
PIN_ODR_HIGH(GPIOA_PIN4) | \
PIN_ODR_HIGH(GPIOA_PIN5) | \
PIN_ODR_HIGH(GPIOA_PIN6) | \
PIN_ODR_HIGH(GPIOA_PIN7) | \
PIN_ODR_HIGH(GPIOA_PIN8) | \
PIN_ODR_HIGH(GPIOA_PIN9) | \
PIN_ODR_HIGH(GPIOA_PIN10) | \
PIN_ODR_HIGH(GPIOA_USB_DM) | \
PIN_ODR_HIGH(GPIOA_USB_DP) | \
PIN_ODR_HIGH(GPIOA_SWDIO) | \
PIN_ODR_HIGH(GPIOA_SWCLK) | \
PIN_ODR_HIGH(GPIOA_PIN15))
#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \
PIN_AFIO_AF(GPIOA_PIN1, 0U) | \
PIN_AFIO_AF(GPIOA_PIN2, 0U) | \
PIN_AFIO_AF(GPIOA_PIN3, 0U) | \
PIN_AFIO_AF(GPIOA_PIN4, 0U) | \
PIN_AFIO_AF(GPIOA_PIN5, 0U) | \
PIN_AFIO_AF(GPIOA_PIN6, 0U) | \
PIN_AFIO_AF(GPIOA_PIN7, 0U))
#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \
PIN_AFIO_AF(GPIOA_PIN9, 0U) | \
PIN_AFIO_AF(GPIOA_PIN10, 0U) | \
PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \
PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \
PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \
PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \
PIN_AFIO_AF(GPIOA_PIN15, 0U))
/*
* GPIOB setup:
*
* PB0 - PIN0 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - PIN3 (input pullup).
* PB4 - PIN4 (input pullup).
* PB5 - PIN5 (input pullup).
* PB6 - PIN6 (input pullup).
* PB7 - PIN7 (input pullup).
* PB8 - PIN8 (input pullup).
* PB9 - PIN9 (input pullup).
* PB10 - PIN10 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
* PB13 - SPI2_SCK (alternate 0).
* PB14 - SPI2_MISO (alternate 0).
* PB15 - SPI2_MOSI (alternate 0).
*/
#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_INPUT(GPIOB_PIN3) | \
PIN_MODE_INPUT(GPIOB_PIN4) | \
PIN_MODE_INPUT(GPIOB_PIN5) | \
PIN_MODE_INPUT(GPIOB_PIN6) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
PIN_MODE_INPUT(GPIOB_PIN8) | \
PIN_MODE_INPUT(GPIOB_PIN9) | \
PIN_MODE_INPUT(GPIOB_PIN10) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \
PIN_OSPEED_HIGH(GPIOB_PIN2) | \
PIN_OSPEED_HIGH(GPIOB_PIN3) | \
PIN_OSPEED_HIGH(GPIOB_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_PIN3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
PIN_PUPDR_PULLUP(GPIOB_PIN6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
PIN_ODR_HIGH(GPIOB_PIN1) | \
PIN_ODR_HIGH(GPIOB_PIN2) | \
PIN_ODR_HIGH(GPIOB_PIN3) | \
PIN_ODR_HIGH(GPIOB_PIN4) | \
PIN_ODR_HIGH(GPIOB_PIN5) | \
PIN_ODR_HIGH(GPIOB_PIN6) | \
PIN_ODR_HIGH(GPIOB_PIN7) | \
PIN_ODR_HIGH(GPIOB_PIN8) | \
PIN_ODR_HIGH(GPIOB_PIN9) | \
PIN_ODR_HIGH(GPIOB_PIN10) | \
PIN_ODR_HIGH(GPIOB_PIN11) | \
PIN_ODR_HIGH(GPIOB_PIN12) | \
PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \
PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \
PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \
PIN_AFIO_AF(GPIOB_PIN1, 0U) | \
PIN_AFIO_AF(GPIOB_PIN2, 0U) | \
PIN_AFIO_AF(GPIOB_PIN3, 0U) | \
PIN_AFIO_AF(GPIOB_PIN4, 0U) | \
PIN_AFIO_AF(GPIOB_PIN5, 0U) | \
PIN_AFIO_AF(GPIOB_PIN6, 0U) | \
PIN_AFIO_AF(GPIOB_PIN7, 0U))
#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \
PIN_AFIO_AF(GPIOB_PIN9, 0U) | \
PIN_AFIO_AF(GPIOB_PIN10, 0U) | \
PIN_AFIO_AF(GPIOB_PIN11, 0U) | \
PIN_AFIO_AF(GPIOB_PIN12, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
/*
* GPIOC setup:
*
* PC0 - MEMS_CS (output pushpull maximum).
* PC1 - PIN1 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
* PC5 - PIN5 (input pullup).
* PC6 - LED_RED (output pushpull maximum).
* PC7 - LED_BLUE (output pushpull maximum).
* PC8 - LED_ORANGE (output pushpull maximum).
* PC9 - LED_GREEN (output pushpull maximum).
* PC10 - PIN10 (input pullup).
* PC11 - PIN11 (input pullup).
* PC12 - PIN12 (input pullup).
* PC13 - PIN13 (input pullup).
* PC14 - OSC32_IN (input floating).
* PC15 - OSC32_OUT (input floating).
*/
#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \
PIN_MODE_INPUT(GPIOC_PIN1) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
PIN_MODE_INPUT(GPIOC_PIN5) | \
PIN_MODE_OUTPUT(GPIOC_LED_RED) | \
PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \
PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \
PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \
PIN_MODE_INPUT(GPIOC_PIN10) | \
PIN_MODE_INPUT(GPIOC_PIN11) | \
PIN_MODE_INPUT(GPIOC_PIN12) | \
PIN_MODE_INPUT(GPIOC_PIN13) | \
PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
PIN_MODE_INPUT(GPIOC_OSC32_OUT))
#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \
PIN_OSPEED_HIGH(GPIOC_LED_RED) | \
PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \
PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \
PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \
PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \
PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \
PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \
PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \
PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \
PIN_ODR_HIGH(GPIOC_PIN1) | \
PIN_ODR_HIGH(GPIOC_PIN2) | \
PIN_ODR_HIGH(GPIOC_PIN3) | \
PIN_ODR_HIGH(GPIOC_PIN4) | \
PIN_ODR_HIGH(GPIOC_PIN5) | \
PIN_ODR_LOW(GPIOC_LED_RED) | \
PIN_ODR_LOW(GPIOC_LED_BLUE) | \
PIN_ODR_LOW(GPIOC_LED_ORANGE) | \
PIN_ODR_LOW(GPIOC_LED_GREEN) | \
PIN_ODR_HIGH(GPIOC_PIN10) | \
PIN_ODR_HIGH(GPIOC_PIN11) | \
PIN_ODR_HIGH(GPIOC_PIN12) | \
PIN_ODR_HIGH(GPIOC_PIN13) | \
PIN_ODR_HIGH(GPIOC_OSC32_IN) | \
PIN_ODR_HIGH(GPIOC_OSC32_OUT))
#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \
PIN_AFIO_AF(GPIOC_PIN1, 0U) | \
PIN_AFIO_AF(GPIOC_PIN2, 0U) | \
PIN_AFIO_AF(GPIOC_PIN3, 0U) | \
PIN_AFIO_AF(GPIOC_PIN4, 0U) | \
PIN_AFIO_AF(GPIOC_PIN5, 0U) | \
PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \
PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \
PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \
PIN_AFIO_AF(GPIOC_PIN10, 0U) | \
PIN_AFIO_AF(GPIOC_PIN11, 0U) | \
PIN_AFIO_AF(GPIOC_PIN12, 0U) | \
PIN_AFIO_AF(GPIOC_PIN13, 0U) | \
PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \
PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
/*
* GPIOD setup:
*
* PD0 - PIN0 (input pullup).
* PD1 - PIN1 (input pullup).
* PD2 - PIN2 (input pullup).
* PD3 - PIN3 (input pullup).
* PD4 - PIN4 (input pullup).
* PD5 - PIN5 (input pullup).
* PD6 - PIN6 (input pullup).
* PD7 - PIN7 (input pullup).
* PD8 - PIN8 (input pullup).
* PD9 - PIN9 (input pullup).
* PD10 - PIN10 (input pullup).
* PD11 - PIN11 (input pullup).
* PD12 - PIN12 (input pullup).
* PD13 - PIN13 (input pullup).
* PD14 - PIN14 (input pullup).
* PD15 - PIN15 (input pullup).
*/
#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
PIN_MODE_INPUT(GPIOD_PIN1) | \
PIN_MODE_INPUT(GPIOD_PIN2) | \
PIN_MODE_INPUT(GPIOD_PIN3) | \
PIN_MODE_INPUT(GPIOD_PIN4) | \
PIN_MODE_INPUT(GPIOD_PIN5) | \
PIN_MODE_INPUT(GPIOD_PIN6) | \
PIN_MODE_INPUT(GPIOD_PIN7) | \
PIN_MODE_INPUT(GPIOD_PIN8) | \
PIN_MODE_INPUT(GPIOD_PIN9) | \
PIN_MODE_INPUT(GPIOD_PIN10) | \
PIN_MODE_INPUT(GPIOD_PIN11) | \
PIN_MODE_INPUT(GPIOD_PIN12) | \
PIN_MODE_INPUT(GPIOD_PIN13) | \
PIN_MODE_INPUT(GPIOD_PIN14) | \
PIN_MODE_INPUT(GPIOD_PIN15))
#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN15))
#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
PIN_PUPDR_PULLUP(GPIOD_PIN15))
#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
PIN_ODR_HIGH(GPIOD_PIN1) | \
PIN_ODR_HIGH(GPIOD_PIN2) | \
PIN_ODR_HIGH(GPIOD_PIN3) | \
PIN_ODR_HIGH(GPIOD_PIN4) | \
PIN_ODR_HIGH(GPIOD_PIN5) | \
PIN_ODR_HIGH(GPIOD_PIN6) | \
PIN_ODR_HIGH(GPIOD_PIN7) | \
PIN_ODR_HIGH(GPIOD_PIN8) | \
PIN_ODR_HIGH(GPIOD_PIN9) | \
PIN_ODR_HIGH(GPIOD_PIN10) | \
PIN_ODR_HIGH(GPIOD_PIN11) | \
PIN_ODR_HIGH(GPIOD_PIN12) | \
PIN_ODR_HIGH(GPIOD_PIN13) | \
PIN_ODR_HIGH(GPIOD_PIN14) | \
PIN_ODR_HIGH(GPIOD_PIN15))
#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \
PIN_AFIO_AF(GPIOD_PIN1, 0U) | \
PIN_AFIO_AF(GPIOD_PIN2, 0U) | \
PIN_AFIO_AF(GPIOD_PIN3, 0U) | \
PIN_AFIO_AF(GPIOD_PIN4, 0U) | \
PIN_AFIO_AF(GPIOD_PIN5, 0U) | \
PIN_AFIO_AF(GPIOD_PIN6, 0U) | \
PIN_AFIO_AF(GPIOD_PIN7, 0U))
#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \
PIN_AFIO_AF(GPIOD_PIN9, 0U) | \
PIN_AFIO_AF(GPIOD_PIN10, 0U) | \
PIN_AFIO_AF(GPIOD_PIN11, 0U) | \
PIN_AFIO_AF(GPIOD_PIN12, 0U) | \
PIN_AFIO_AF(GPIOD_PIN13, 0U) | \
PIN_AFIO_AF(GPIOD_PIN14, 0U) | \
PIN_AFIO_AF(GPIOD_PIN15, 0U))
/*
* GPIOE setup:
*
* PE0 - PIN0 (input pullup).
* PE1 - PIN1 (input pullup).
* PE2 - PIN2 (input pullup).
* PE3 - PIN3 (input pullup).
* PE4 - PIN4 (input pullup).
* PE5 - PIN5 (input pullup).
* PE6 - PIN6 (input pullup).
* PE7 - PIN7 (input pullup).
* PE8 - PIN8 (input pullup).
* PE9 - PIN9 (input pullup).
* PE10 - PIN10 (input pullup).
* PE11 - PIN11 (input pullup).
* PE12 - PIN12 (input pullup).
* PE13 - PIN13 (input pullup).
* PE14 - PIN14 (input pullup).
* PE15 - PIN15 (input pullup).
*/
#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
PIN_MODE_INPUT(GPIOE_PIN1) | \
PIN_MODE_INPUT(GPIOE_PIN2) | \
PIN_MODE_INPUT(GPIOE_PIN3) | \
PIN_MODE_INPUT(GPIOE_PIN4) | \
PIN_MODE_INPUT(GPIOE_PIN5) | \
PIN_MODE_INPUT(GPIOE_PIN6) | \
PIN_MODE_INPUT(GPIOE_PIN7) | \
PIN_MODE_INPUT(GPIOE_PIN8) | \
PIN_MODE_INPUT(GPIOE_PIN9) | \
PIN_MODE_INPUT(GPIOE_PIN10) | \
PIN_MODE_INPUT(GPIOE_PIN11) | \
PIN_MODE_INPUT(GPIOE_PIN12) | \
PIN_MODE_INPUT(GPIOE_PIN13) | \
PIN_MODE_INPUT(GPIOE_PIN14) | \
PIN_MODE_INPUT(GPIOE_PIN15))
#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN15))
#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
PIN_PUPDR_PULLUP(GPIOE_PIN2) | \
PIN_PUPDR_PULLUP(GPIOE_PIN3) | \
PIN_PUPDR_PULLUP(GPIOE_PIN4) | \
PIN_PUPDR_PULLUP(GPIOE_PIN5) | \
PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
PIN_PUPDR_PULLUP(GPIOE_PIN8) | \
PIN_PUPDR_PULLUP(GPIOE_PIN9) | \
PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
PIN_PUPDR_PULLUP(GPIOE_PIN11) | \
PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
PIN_PUPDR_PULLUP(GPIOE_PIN13) | \
PIN_PUPDR_PULLUP(GPIOE_PIN14) | \
PIN_PUPDR_PULLUP(GPIOE_PIN15))
#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
PIN_ODR_HIGH(GPIOE_PIN1) | \
PIN_ODR_HIGH(GPIOE_PIN2) | \
PIN_ODR_HIGH(GPIOE_PIN3) | \
PIN_ODR_HIGH(GPIOE_PIN4) | \
PIN_ODR_HIGH(GPIOE_PIN5) | \
PIN_ODR_HIGH(GPIOE_PIN6) | \
PIN_ODR_HIGH(GPIOE_PIN7) | \
PIN_ODR_HIGH(GPIOE_PIN8) | \
PIN_ODR_HIGH(GPIOE_PIN9) | \
PIN_ODR_HIGH(GPIOE_PIN10) | \
PIN_ODR_HIGH(GPIOE_PIN11) | \
PIN_ODR_HIGH(GPIOE_PIN12) | \
PIN_ODR_HIGH(GPIOE_PIN13) | \
PIN_ODR_HIGH(GPIOE_PIN14) | \
PIN_ODR_HIGH(GPIOE_PIN15))
#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \
PIN_AFIO_AF(GPIOE_PIN1, 0U) | \
PIN_AFIO_AF(GPIOE_PIN2, 0U) | \
PIN_AFIO_AF(GPIOE_PIN3, 0U) | \
PIN_AFIO_AF(GPIOE_PIN4, 0U) | \
PIN_AFIO_AF(GPIOE_PIN5, 0U) | \
PIN_AFIO_AF(GPIOE_PIN6, 0U) | \
PIN_AFIO_AF(GPIOE_PIN7, 0U))
#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \
PIN_AFIO_AF(GPIOE_PIN9, 0U) | \
PIN_AFIO_AF(GPIOE_PIN10, 0U) | \
PIN_AFIO_AF(GPIOE_PIN11, 0U) | \
PIN_AFIO_AF(GPIOE_PIN12, 0U) | \
PIN_AFIO_AF(GPIOE_PIN13, 0U) | \
PIN_AFIO_AF(GPIOE_PIN14, 0U) | \
PIN_AFIO_AF(GPIOE_PIN15, 0U))
/*
* GPIOF setup:
*
* PF0 - OSC_IN (input floating).
* PF1 - OSC_OUT (input floating).
* PF2 - PIN2 (input pullup).
* PF3 - PIN3 (input pullup).
* PF4 - PIN4 (input pullup).
* PF5 - PIN5 (input pullup).
* PF6 - PIN6 (input pullup).
* PF7 - PIN7 (input pullup).
* PF8 - PIN8 (input pullup).
* PF9 - PIN9 (input pullup).
* PF10 - PIN10 (input pullup).
* PF11 - PIN11 (input pullup).
* PF12 - PIN12 (input pullup).
* PF13 - PIN13 (input pullup).
* PF14 - PIN14 (input pullup).
* PF15 - PIN15 (input pullup).
*/
#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \
PIN_MODE_INPUT(GPIOF_OSC_OUT) | \
PIN_MODE_INPUT(GPIOF_PIN2) | \
PIN_MODE_INPUT(GPIOF_PIN3) | \
PIN_MODE_INPUT(GPIOF_PIN4) | \
PIN_MODE_INPUT(GPIOF_PIN5) | \
PIN_MODE_INPUT(GPIOF_PIN6) | \
PIN_MODE_INPUT(GPIOF_PIN7) | \
PIN_MODE_INPUT(GPIOF_PIN8) | \
PIN_MODE_INPUT(GPIOF_PIN9) | \
PIN_MODE_INPUT(GPIOF_PIN10) | \
PIN_MODE_INPUT(GPIOF_PIN11) | \
PIN_MODE_INPUT(GPIOF_PIN12) | \
PIN_MODE_INPUT(GPIOF_PIN13) | \
PIN_MODE_INPUT(GPIOF_PIN14) | \
PIN_MODE_INPUT(GPIOF_PIN15))
#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \
PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \
PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN15))
#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \
PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \
PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
PIN_PUPDR_PULLUP(GPIOF_PIN15))
#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \
PIN_ODR_HIGH(GPIOF_OSC_OUT) | \
PIN_ODR_HIGH(GPIOF_PIN2) | \
PIN_ODR_HIGH(GPIOF_PIN3) | \
PIN_ODR_HIGH(GPIOF_PIN4) | \
PIN_ODR_HIGH(GPIOF_PIN5) | \
PIN_ODR_HIGH(GPIOF_PIN6) | \
PIN_ODR_HIGH(GPIOF_PIN7) | \
PIN_ODR_HIGH(GPIOF_PIN8) | \
PIN_ODR_HIGH(GPIOF_PIN9) | \
PIN_ODR_HIGH(GPIOF_PIN10) | \
PIN_ODR_HIGH(GPIOF_PIN11) | \
PIN_ODR_HIGH(GPIOF_PIN12) | \
PIN_ODR_HIGH(GPIOF_PIN13) | \
PIN_ODR_HIGH(GPIOF_PIN14) | \
PIN_ODR_HIGH(GPIOF_PIN15))
#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \
PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \
PIN_AFIO_AF(GPIOF_PIN2, 0U) | \
PIN_AFIO_AF(GPIOF_PIN3, 0U) | \
PIN_AFIO_AF(GPIOF_PIN4, 0U) | \
PIN_AFIO_AF(GPIOF_PIN5, 0U) | \
PIN_AFIO_AF(GPIOF_PIN6, 0U) | \
PIN_AFIO_AF(GPIOF_PIN7, 0U))
#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \
PIN_AFIO_AF(GPIOF_PIN9, 0U) | \
PIN_AFIO_AF(GPIOF_PIN10, 0U) | \
PIN_AFIO_AF(GPIOF_PIN11, 0U) | \
PIN_AFIO_AF(GPIOF_PIN12, 0U) | \
PIN_AFIO_AF(GPIOF_PIN13, 0U) | \
PIN_AFIO_AF(GPIOF_PIN14, 0U) | \
PIN_AFIO_AF(GPIOF_PIN15, 0U))
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */
#endif /* BOARD_H */

View File

@ -1,5 +0,0 @@
# List of all the board related files.
BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
# Required include directories
BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

View File

@ -1,703 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<!-- STM32F0xx board Template -->
<board
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
<configuration_settings>
<templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
<output_path>..</output_path>
<hal_version>3.0.x</hal_version>
</configuration_settings>
<board_name>ST STM32F072B-Discovery</board_name>
<board_id>ST_STM32F072B_DISCOVERY</board_id>
<board_functions></board_functions>
<subtype>STM32F072xB</subtype>
<clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
LSEBypass="false" LSEDrive="3 High Drive (default)" />
<ports>
<GPIOA>
<pin0
ID="BUTTON"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID="USB_DM"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID="USB_DP"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID="SWDIO"
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin14
ID="SWCLK"
Type="PushPull"
Speed="Maximum"
Resistor="PullDown"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOA>
<GPIOB>
<pin0
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID="SPI2_SCK"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin14
ID="SPI2_MISO"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin15
ID="SPI2_MOSI"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
</GPIOB>
<GPIOC>
<pin0
ID="MEMS_CS"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Output"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID="LED_RED"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin7
ID="LED_BLUE"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin8
ID="LED_ORANGE"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" ></pin8>
<pin9
ID="LED_GREEN"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID="OSC32_IN"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID="OSC32_OUT"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOC>
<GPIOD>
<pin0
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOD>
<GPIOE>
<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
</GPIOE>
<GPIOF>
<pin0
ID="OSC_IN"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID="OSC_OUT"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOF>
</ports>
</board>

View File

@ -33,6 +33,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROW_PINS { B12, B11, B14, A8, A1 }
#define DIODE_DIRECTION COL2ROW
#define BACKLIGHT_PIN A6
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
#define BACKLIGHT_LEVELS 6
#define BACKLIGHT_BREATHING
#define BREATHING_PERIOD 6
@ -52,16 +56,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGB_DI_PIN B15
#define RGBLED_NUM 20
#define WS2812_SPI SPID2
#define WS2812_SPI_MOSI_PAL_MODE 0
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 1
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE
// Let VIA handle the QMK RGBLIGHT
#define VIA_QMK_RGBLIGHT_ENABLE
/*
* Feature disable options

View File

@ -1,15 +1,10 @@
# MCU name
MCU = STM32F072
BOARD = ST_STM32F072B_DISCOVERY
# Build Options
# comment out to disable the options.
#
# project specific files
VPATH += keyboards/cannonkeys/stm32f072
SRC = keyboard.c \
led.c
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
@ -19,7 +14,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
CUSTOM_MATRIX = no # Custom matrix file
# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = spi

View File

@ -1,241 +0,0 @@
#include "keyboard.h"
#include "ch.h"
#include "hal.h"
#include "led_custom.h"
#include "util.h"
#include "quantum.h"
#include "raw_hid.h"
#include "dynamic_keymap.h"
#include "tmk_core/common/eeprom.h"
#include "version.h" // for QMK_BUILDDATE used in EEPROM magic
#include "via.h"
#define EEPROM_CUSTOM_BACKLIGHT (VIA_EEPROM_CUSTOM_CONFIG_ADDR)
backlight_config_t kb_backlight_config = {
.enable = true,
.breathing = true,
.level = BACKLIGHT_LEVELS
};
void backlight_config_save(){
eeprom_update_byte((uint8_t*)EEPROM_CUSTOM_BACKLIGHT, kb_backlight_config.raw);
}
void backlight_config_load(){
kb_backlight_config.raw = eeprom_read_byte((uint8_t*)EEPROM_CUSTOM_BACKLIGHT);
}
// Called from via_init() if VIA_ENABLE
// Called from matrix_init_kb() if not VIA_ENABLE
void via_init_kb(void)
{
// If the EEPROM has the magic, the data is good.
// OK to load from EEPROM.
if (via_eeprom_is_valid()) {
backlight_config_load();
} else {
// If the EEPROM has not been saved before, or is out of date,
// save the default values to the EEPROM. Default values
// come from construction of the backlight_config instance.
backlight_config_save();
// DO NOT set EEPROM valid here, let caller do this
}
}
__attribute__ ((weak))
void matrix_init_board(void);
void matrix_init_kb(void){
// If VIA is disabled, we still need to load backlight settings.
// Call via_init_kb() the same way as via_init(), with setting
// EEPROM valid afterwards.
#ifndef VIA_ENABLE
via_init_kb();
via_eeprom_set_valid(true);
#endif // VIA_ENABLE
backlight_init_ports();
matrix_init_board();
}
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case BL_INC:
if (record->event.pressed) {
kb_backlight_config.level = kb_backlight_config.level + 1;
if(kb_backlight_config.level > BACKLIGHT_LEVELS){
kb_backlight_config.level = BACKLIGHT_LEVELS;
}
backlight_set(kb_backlight_config.level);
backlight_config_save();
}
return false;
case BL_TOGG:
if (record->event.pressed) {
kb_backlight_config.enable = !kb_backlight_config.enable;
if(kb_backlight_config.enable){
backlight_set(kb_backlight_config.level);
} else {
backlight_set(0);
}
backlight_config_save();
}
return false;
case BL_DEC:
if (record->event.pressed) {
if(kb_backlight_config.level <= 1){
kb_backlight_config.level = 0;
} else {
kb_backlight_config.level = kb_backlight_config.level - 1;
}
backlight_set(kb_backlight_config.level);
backlight_config_save();
}
return false;
case BL_BRTG:
if (record->event.pressed) {
kb_backlight_config.breathing = !kb_backlight_config.breathing;
breathing_toggle();
backlight_config_save();
}
return false;
default:
break;
}
return process_record_user(keycode, record);;
}
#ifdef VIA_ENABLE
void backlight_get_value( uint8_t *data )
{
uint8_t *value_id = &(data[0]);
uint8_t *value_data = &(data[1]);
switch (*value_id)
{
case id_qmk_backlight_brightness:
{
// level / BACKLIGHT_LEVELS * 255
value_data[0] = ((uint16_t)kb_backlight_config.level) * 255 / BACKLIGHT_LEVELS;
break;
}
case id_qmk_backlight_effect:
{
value_data[0] = kb_backlight_config.breathing ? 1 : 0;
break;
}
}
}
void backlight_set_value( uint8_t *data )
{
uint8_t *value_id = &(data[0]);
uint8_t *value_data = &(data[1]);
switch (*value_id)
{
case id_qmk_backlight_brightness:
{
// level / 255 * BACKLIGHT_LEVELS
kb_backlight_config.level = ((uint16_t)value_data[0]) * BACKLIGHT_LEVELS / 255;
backlight_set(kb_backlight_config.level);
break;
}
case id_qmk_backlight_effect:
{
if ( value_data[0] == 0 ) {
kb_backlight_config.breathing = false;
breathing_disable();
} else {
kb_backlight_config.breathing = true;
breathing_enable();
}
break;
}
}
}
void raw_hid_receive_kb( uint8_t *data, uint8_t length )
{
uint8_t *command_id = &(data[0]);
uint8_t *command_data = &(data[1]);
switch ( *command_id )
{
case id_lighting_set_value:
{
backlight_set_value(command_data);
break;
}
case id_lighting_get_value:
{
backlight_get_value(command_data);
break;
}
case id_lighting_save:
{
backlight_config_save();
break;
}
default:
{
// Unhandled message.
*command_id = id_unhandled;
break;
}
}
// DO NOT call raw_hid_send(data,length) here, let caller do this
}
#endif
//
// In the case of VIA being disabled, we still need to check if
// keyboard level EEPROM memory is valid before loading.
// Thus these are copies of the same functions in VIA, since
// the backlight settings reuse VIA's EEPROM magic/version,
// and the ones in via.c won't be compiled in.
//
// Yes, this is sub-optimal, and is only here for completeness
// (i.e. catering to the 1% of people that want wilba.tech LED bling
// AND want persistent settings BUT DON'T want to use dynamic keymaps/VIA).
//
#ifndef VIA_ENABLE
bool via_eeprom_is_valid(void)
{
char *p = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54"
uint8_t magic0 = ( ( p[2] & 0x0F ) << 4 ) | ( p[3] & 0x0F );
uint8_t magic1 = ( ( p[5] & 0x0F ) << 4 ) | ( p[6] & 0x0F );
uint8_t magic2 = ( ( p[8] & 0x0F ) << 4 ) | ( p[9] & 0x0F );
return (eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+0 ) == magic0 &&
eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+1 ) == magic1 &&
eeprom_read_byte( (void*)VIA_EEPROM_MAGIC_ADDR+2 ) == magic2 );
}
// Sets VIA/keyboard level usage of EEPROM to valid/invalid
// Keyboard level code (eg. via_init_kb()) should not call this
void via_eeprom_set_valid(bool valid)
{
char *p = QMK_BUILDDATE; // e.g. "2019-11-05-11:29:54"
uint8_t magic0 = ( ( p[2] & 0x0F ) << 4 ) | ( p[3] & 0x0F );
uint8_t magic1 = ( ( p[5] & 0x0F ) << 4 ) | ( p[6] & 0x0F );
uint8_t magic2 = ( ( p[8] & 0x0F ) << 4 ) | ( p[9] & 0x0F );
eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+0, valid ? magic0 : 0xFF);
eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+1, valid ? magic1 : 0xFF);
eeprom_update_byte( (void*)VIA_EEPROM_MAGIC_ADDR+2, valid ? magic2 : 0xFF);
}
void via_eeprom_reset(void)
{
// Set the VIA specific EEPROM state as invalid.
via_eeprom_set_valid(false);
// Set the TMK/QMK EEPROM state as invalid.
eeconfig_disable();
}
#endif // VIA_ENABLE

View File

@ -1,23 +0,0 @@
#pragma once
#include "quantum.h"
typedef union {
uint8_t raw;
struct {
bool enable :1;
bool breathing : 1;
uint8_t level :6;
};
} backlight_config_t;
// Backlighting
extern backlight_config_t kb_backlight_config;
extern bool kb_backlight_breathing;
void backlight_init_ports(void);
void backlight_set(uint8_t level);
bool is_breathing(void);
void breathing_enable(void);
void breathing_disable(void);
void backlight_config_load(void);
void backlight_config_save(void);

View File

@ -1,251 +0,0 @@
/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "hal.h"
#include "led_custom.h"
#include "keyboard.h"
#include "printf.h"
static void breathing_callback(PWMDriver *pwmp);
static PWMConfig pwmCFG = {
0xFFFF, /* PWM clock frequency */
256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */
NULL, /* No Callback */
{
{PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */
{PWM_OUTPUT_DISABLED, NULL},
{PWM_OUTPUT_DISABLED, NULL},
{PWM_OUTPUT_DISABLED, NULL}
},
0, /* HW dependent part.*/
0
};
static PWMConfig pwmCFG_breathing = {
0xFFFF, /* 10kHz PWM clock frequency */
256, /* PWM period (in ticks) 1S (1/10kHz=0.1mS 0.1ms*10000 ticks=1S) */
breathing_callback, /* Breathing Callback */
{
{PWM_OUTPUT_ACTIVE_HIGH, NULL}, /* Enable Channel 0 */
{PWM_OUTPUT_DISABLED, NULL},
{PWM_OUTPUT_DISABLED, NULL},
{PWM_OUTPUT_DISABLED, NULL}
},
0, /* HW dependent part.*/
0
};
// See http://jared.geek.nz/2013/feb/linear-led-pwm
static uint16_t cie_lightness(uint16_t v) {
if (v <= 5243) // if below 8% of max
return v / 9; // same as dividing by 900%
else {
uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
// to get a useful result with integer division, we shift left in the expression above
// and revert what we've done again after squaring.
y = y * y * y >> 8;
if (y > 0xFFFFUL) // prevent overflow
return 0xFFFFU;
else
return (uint16_t) y;
}
}
uint8_t get_backlight_level(void){
return kb_backlight_config.level;
}
void backlight_init_ports(void) {
printf("backlight_init_ports()\n");
palSetPadMode(GPIOA, 6, PAL_MODE_ALTERNATE(1));
pwmStart(&PWMD3, &pwmCFG);
// pwmEnableChannel(&PWMD3, 0, PWM_FRACTION_TO_WIDTH(&PWMD3, 0xFFFF,cie_lightness(0xFFFF)));
if(kb_backlight_config.enable){
backlight_set(kb_backlight_config.level);
if(kb_backlight_config.breathing){
breathing_enable();
}
} else {
backlight_set(0);
}
}
void backlight_set(uint8_t level) {
printf("backlight_set(%d)\n", level);
uint32_t duty = (uint32_t)(cie_lightness(0xFFFF * (uint32_t) level / BACKLIGHT_LEVELS));
printf("duty: (%d)\n", duty);
if (level == 0) {
// Turn backlight off
pwmDisableChannel(&PWMD3, 0);
} else {
// Turn backlight on
if(!is_breathing()){
pwmEnableChannel(&PWMD3, 0, PWM_FRACTION_TO_WIDTH(&PWMD3,0xFFFF,duty));
}
}
}
uint8_t backlight_tick = 0;
void backlight_task(void) {
}
#define BREATHING_NO_HALT 0
#define BREATHING_HALT_OFF 1
#define BREATHING_HALT_ON 2
#define BREATHING_STEPS 128
static uint8_t breathing_period = BREATHING_PERIOD;
static uint8_t breathing_halt = BREATHING_NO_HALT;
static uint16_t breathing_counter = 0;
bool is_breathing(void) {
return PWMD3.config == &pwmCFG_breathing;
}
#define breathing_min() do {breathing_counter = 0;} while (0)
#define breathing_max() do {breathing_counter = breathing_period * 256 / 2;} while (0)
void breathing_interrupt_enable(void){
pwmStop(&PWMD3);
pwmStart(&PWMD3, &pwmCFG_breathing);
chSysLockFromISR();
pwmEnablePeriodicNotification(&PWMD3);
pwmEnableChannelI(
&PWMD3,
0,
PWM_FRACTION_TO_WIDTH(
&PWMD3,
0xFFFF,
0xFFFF
)
);
chSysUnlockFromISR();
}
void breathing_interrupt_disable(void){
pwmStop(&PWMD3);
pwmStart(&PWMD3, &pwmCFG);
}
void breathing_enable(void)
{
breathing_counter = 0;
breathing_halt = BREATHING_NO_HALT;
breathing_interrupt_enable();
}
void breathing_pulse(void)
{
if (get_backlight_level() == 0)
breathing_min();
else
breathing_max();
breathing_halt = BREATHING_HALT_ON;
breathing_interrupt_enable();
}
void breathing_disable(void)
{
printf("breathing_disable()\n");
breathing_interrupt_disable();
// Restore backlight level
backlight_set(get_backlight_level());
}
void breathing_self_disable(void)
{
if (get_backlight_level() == 0)
breathing_halt = BREATHING_HALT_OFF;
else
breathing_halt = BREATHING_HALT_ON;
}
void breathing_toggle(void) {
if (is_breathing()){
printf("disable breathing\n");
breathing_disable();
} else {
printf("enable breathing\n");
breathing_enable();
}
}
void breathing_period_set(uint8_t value)
{
if (!value)
value = 1;
breathing_period = value;
}
void breathing_period_default(void) {
breathing_period_set(BREATHING_PERIOD);
}
void breathing_period_inc(void)
{
breathing_period_set(breathing_period+1);
}
void breathing_period_dec(void)
{
breathing_period_set(breathing_period-1);
}
/* To generate breathing curve in python:
* from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
*/
static const uint8_t breathing_table[BREATHING_STEPS] = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
// Use this before the cie_lightness function.
static inline uint16_t scale_backlight(uint16_t v) {
return v / BACKLIGHT_LEVELS * get_backlight_level();
}
static void breathing_callback(PWMDriver *pwmp)
{
(void)pwmp;
uint16_t interval = (uint16_t) breathing_period * 256 / BREATHING_STEPS;
// resetting after one period to prevent ugly reset at overflow.
breathing_counter = (breathing_counter + 1) % (breathing_period * 256);
uint8_t index = breathing_counter / interval % BREATHING_STEPS;
if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
{
breathing_interrupt_disable();
}
uint32_t duty = cie_lightness(scale_backlight(breathing_table[index] * 256));
chSysLockFromISR();
pwmEnableChannelI(
&PWMD3,
0,
PWM_FRACTION_TO_WIDTH(
&PWMD3,
0xFFFF,
duty
)
);
chSysUnlockFromISR();
}

View File

@ -1,8 +0,0 @@
#pragma once
void backlight_task(void);
void breathing_interrupt_disable(void);
void breathing_interrupt_enable(void);
void breathing_toggle(void);
void breathing_enable(void);
void breathing_disable(void);

View File

@ -1,151 +0,0 @@
#include "ch.h"
#include "hal.h"
#include "ws2812.h"
#define BYTES_FOR_LED_BYTE 4
#define NB_COLORS 3
#define BYTES_FOR_LED BYTES_FOR_LED_BYTE*NB_COLORS
#define DATA_SIZE BYTES_FOR_LED*NB_LEDS
#define RESET_SIZE 200
// Define the spi your LEDs are plugged to here
#define LEDS_SPI WS2812_SPI
// Define the number of LEDs you wish to control in your LED strip
#define NB_LEDS RGBLED_NUM
#define LED_SPIRAL 0
static uint8_t txbuf[DATA_SIZE + RESET_SIZE];
static uint8_t get_protocol_eq(uint8_t data, int pos);
/*
* This lib is meant to be used asynchronously, thus the colors contained in
* the txbuf will be sent in loop, so that the colors are always the ones you
* put in the table (the user thus have less to worry about)
*
* Since the data are sent via DMA, and the call to spiSend is a blocking one,
* the processor ressources are not used to much, if you see your program being
* too slow, simply add a:
* chThdSleepMilliseconds(x);
* after the spiSend, where you increment x untill you are satisfied with your
* program speed, another trick may be to lower this thread priority : your call
*/
static THD_WORKING_AREA(LEDS_THREAD_WA, 128);
static THD_FUNCTION(ledsThread, arg) {
(void) arg;
while(1){
spiSend(&LEDS_SPI, DATA_SIZE + RESET_SIZE, txbuf);
}
}
#if LED_SPIRAL
/*
* 'Led spiral' is a simple demo in which we put all the leds to the same
* color, where this color does all the hsv circle in loop.
* If you want to launch the thread that will chage the led colors to the
* appropriate value, simply set LED_SPIRAL to 1.
*/
static THD_WORKING_AREA(HSVTRANS_WA, 128);
static THD_FUNCTION(hsv_transThread, arg) {
(void) arg;
hsv_color color = {0, 255, 255};
while(1){
color.h += 1;
color.h %= 256;
set_leds_color_hsv(color);
chThdSleepMilliseconds(50);
}
}
#endif
static const SPIConfig spicfg = {
false,
NULL,
GPIOB,
15,
SPI_CR1_BR_1|SPI_CR1_BR_0 // baudrate : fpclk / 8 => 1tick is 0.32us
};
/*
* Function used to initialize the driver.
*
* Starts by shutting off all the LEDs.
* Then gets access on the LED_SPI driver.
* May eventually launch an animation on the LEDs (e.g. a thread setting the
* txbuff values)
*/
void leds_init(void){
for(int i = 0; i < RESET_SIZE; i++)
txbuf[DATA_SIZE+i] = 0x00;
spiAcquireBus(&LEDS_SPI); /* Acquire ownership of the bus. */
spiStart(&LEDS_SPI, &spicfg); /* Setup transfer parameters. */
spiSelect(&LEDS_SPI); /* Slave Select assertion. */
chThdCreateStatic(LEDS_THREAD_WA, sizeof(LEDS_THREAD_WA),NORMALPRIO, ledsThread, NULL);
#if LED_SPIRAL
chThdCreateStatic(HSVTRANS_WA, sizeof(HSVTRANS_WA),
NORMALPRIO, hsv_transThread, NULL);
#endif
}
/*
* As the trick here is to use the SPI to send a huge pattern of 0 and 1 to
* the ws2812b protocol, we use this helper function to translate bytes into
* 0s and 1s for the LED (with the appropriate timing).
*/
static uint8_t get_protocol_eq(uint8_t data, int pos){
uint8_t eq = 0;
if (data & (1 << (2*(3-pos))))
eq = 0b1110;
else
eq = 0b1000;
if (data & (2 << (2*(3-pos))))
eq += 0b11100000;
else
eq += 0b10000000;
return eq;
}
//
///*
// * If you want to set a LED's color in the RGB color space, simply call this
// * function with a hsv_color containing the desired color and the index of the
// * led on the LED strip (starting from 0, the first one being the closest the
// * first plugged to the board)
// *
// * Only set the color of the LEDs through the functions given by this API
// * (unless you really know what you are doing)
// */
void set_led_color_rgb(LED_TYPE color, int pos){
for(int j = 0; j < 4; j++)
txbuf[BYTES_FOR_LED*pos + j] = get_protocol_eq(color.g, j);
for(int j = 0; j < 4; j++)
txbuf[BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE+j] = get_protocol_eq(color.r, j);
for(int j = 0; j < 4; j++)
txbuf[BYTES_FOR_LED*pos + BYTES_FOR_LED_BYTE*2+j] = get_protocol_eq(color.b, j);
}
void WS2812_init(void) {
leds_init();
}
void ws2812_setleds(LED_TYPE *ledarray, uint16_t number_of_leds) {
uint8_t i = 0;
while (i < number_of_leds) {
set_led_color_rgb(ledarray[i], i);
i++;
}
}
void set_leds_color_rgb(LED_TYPE color){
for(int i = 0; i < NB_LEDS; i++)
set_led_color_rgb(color, i);
}
void ws2812_setleds_rgbw(LED_TYPE *ledarray, uint16_t number_of_leds) {
}

View File

@ -1,268 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* This file has been automatically generated using ChibiStudio board
* generator plugin. Do not edit manually.
*/
#include "hal.h"
#include "stm32_gpio.h"
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/**
* @brief Type of STM32 GPIO port setup.
*/
typedef struct {
uint32_t moder;
uint32_t otyper;
uint32_t ospeedr;
uint32_t pupdr;
uint32_t odr;
uint32_t afrl;
uint32_t afrh;
} gpio_setup_t;
/**
* @brief Type of STM32 GPIO initialization data.
*/
typedef struct {
#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
gpio_setup_t PAData;
#endif
#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
gpio_setup_t PBData;
#endif
#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
gpio_setup_t PCData;
#endif
#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
gpio_setup_t PDData;
#endif
#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
gpio_setup_t PEData;
#endif
#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
gpio_setup_t PFData;
#endif
#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
gpio_setup_t PGData;
#endif
#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
gpio_setup_t PHData;
#endif
#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
gpio_setup_t PIData;
#endif
#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
gpio_setup_t PJData;
#endif
#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
gpio_setup_t PKData;
#endif
} gpio_config_t;
/**
* @brief STM32 GPIO static initialization data.
*/
static const gpio_config_t gpio_default_config = {
#if STM32_HAS_GPIOA
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
#endif
#if STM32_HAS_GPIOB
{VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
#endif
#if STM32_HAS_GPIOC
{VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
#endif
#if STM32_HAS_GPIOD
{VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
#endif
#if STM32_HAS_GPIOE
{VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
#endif
#if STM32_HAS_GPIOF
{VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
#endif
#if STM32_HAS_GPIOG
{VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
#endif
#if STM32_HAS_GPIOH
{VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
#endif
#if STM32_HAS_GPIOI
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH},
#endif
#if STM32_HAS_GPIOJ
{VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH},
#endif
#if STM32_HAS_GPIOK
{VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH}
#endif
};
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
gpiop->OTYPER = config->otyper;
gpiop->OSPEEDR = config->ospeedr;
gpiop->PUPDR = config->pupdr;
gpiop->ODR = config->odr;
gpiop->AFRL = config->afrl;
gpiop->AFRH = config->afrh;
gpiop->MODER = config->moder;
}
static void stm32_gpio_init(void) {
/* Enabling GPIO-related clocks, the mask comes from the
registry header file.*/
rccResetAHB(STM32_GPIO_EN_MASK);
rccEnableAHB(STM32_GPIO_EN_MASK, true);
/* Initializing all the defined GPIO ports.*/
#if STM32_HAS_GPIOA
gpio_init(GPIOA, &gpio_default_config.PAData);
#endif
#if STM32_HAS_GPIOB
gpio_init(GPIOB, &gpio_default_config.PBData);
#endif
#if STM32_HAS_GPIOC
gpio_init(GPIOC, &gpio_default_config.PCData);
#endif
#if STM32_HAS_GPIOD
gpio_init(GPIOD, &gpio_default_config.PDData);
#endif
#if STM32_HAS_GPIOE
gpio_init(GPIOE, &gpio_default_config.PEData);
#endif
#if STM32_HAS_GPIOF
gpio_init(GPIOF, &gpio_default_config.PFData);
#endif
#if STM32_HAS_GPIOG
gpio_init(GPIOG, &gpio_default_config.PGData);
#endif
#if STM32_HAS_GPIOH
gpio_init(GPIOH, &gpio_default_config.PHData);
#endif
#if STM32_HAS_GPIOI
gpio_init(GPIOI, &gpio_default_config.PIData);
#endif
#if STM32_HAS_GPIOJ
gpio_init(GPIOJ, &gpio_default_config.PJData);
#endif
#if STM32_HAS_GPIOK
gpio_init(GPIOK, &gpio_default_config.PKData);
#endif
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Early initialization code.
* @details GPIO ports and system clocks are initialized before everything
* else.
*/
void __early_init(void) {
extern void enter_bootloader_mode_if_requested(void);
enter_bootloader_mode_if_requested();
stm32_gpio_init();
stm32_clock_init();
}
#if HAL_USE_SDC || defined(__DOXYGEN__)
/**
* @brief SDC card detection.
*/
bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
(void)sdcp;
/* TODO: Fill the implementation.*/
return true;
}
/**
* @brief SDC card write protection detection.
*/
bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
(void)sdcp;
/* TODO: Fill the implementation.*/
return false;
}
#endif /* HAL_USE_SDC */
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
/**
* @brief MMC_SPI card detection.
*/
bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
(void)mmcp;
/* TODO: Fill the implementation.*/
return true;
}
/**
* @brief MMC_SPI card write protection detection.
*/
bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
(void)mmcp;
/* TODO: Fill the implementation.*/
return false;
}
#endif
/**
* @brief Board-specific initialization code.
* @todo Add your board-specific code, if any.
*/
void boardInit(void) {
SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP;
SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP);
}

View File

@ -1,940 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* This file has been automatically generated using ChibiStudio board
* generator plugin. Do not edit manually.
*/
#ifndef BOARD_H
#define BOARD_H
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/*
* Setup for ST STM32F072B-Discovery board.
*/
/*
* Board identifier.
*/
#define BOARD_ST_STM32F072B_DISCOVERY
#define BOARD_NAME "ST STM32F072B-Discovery"
/*
* Board oscillators-related settings.
* NOTE: HSE not fitted.
*/
#if !defined(STM32_LSECLK)
#define STM32_LSECLK 32768
#endif
#define STM32_LSEDRV (3U << 3U)
#if !defined(STM32_HSECLK)
#define STM32_HSECLK 0U
#endif
#define STM32_HSE_BYPASS
/*
* MCU type as defined in the ST header.
*/
#define STM32F072xB
/*
* IO pins assignments.
*/
#define GPIOA_BUTTON 0U
#define GPIOA_PIN1 1U
#define GPIOA_PIN2 2U
#define GPIOA_PIN3 3U
#define GPIOA_PIN4 4U
#define GPIOA_PIN5 5U
#define GPIOA_PIN6 6U
#define GPIOA_PIN7 7U
#define GPIOA_PIN8 8U
#define GPIOA_PIN9 9U
#define GPIOA_PIN10 10U
#define GPIOA_USB_DM 11U
#define GPIOA_USB_DP 12U
#define GPIOA_SWDIO 13U
#define GPIOA_SWCLK 14U
#define GPIOA_PIN15 15U
#define GPIOB_PIN0 0U
#define GPIOB_PIN1 1U
#define GPIOB_PIN2 2U
#define GPIOB_PIN3 3U
#define GPIOB_PIN4 4U
#define GPIOB_PIN5 5U
#define GPIOB_PIN6 6U
#define GPIOB_PIN7 7U
#define GPIOB_PIN8 8U
#define GPIOB_PIN9 9U
#define GPIOB_PIN10 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
#define GPIOB_SPI2_SCK 13U
#define GPIOB_SPI2_MISO 14U
#define GPIOB_SPI2_MOSI 15U
#define GPIOC_MEMS_CS 0U
#define GPIOC_PIN1 1U
#define GPIOC_PIN2 2U
#define GPIOC_PIN3 3U
#define GPIOC_PIN4 4U
#define GPIOC_PIN5 5U
#define GPIOC_LED_RED 6U
#define GPIOC_LED_BLUE 7U
#define GPIOC_LED_ORANGE 8U
#define GPIOC_LED_GREEN 9U
#define GPIOC_PIN10 10U
#define GPIOC_PIN11 11U
#define GPIOC_PIN12 12U
#define GPIOC_PIN13 13U
#define GPIOC_OSC32_IN 14U
#define GPIOC_OSC32_OUT 15U
#define GPIOD_PIN0 0U
#define GPIOD_PIN1 1U
#define GPIOD_PIN2 2U
#define GPIOD_PIN3 3U
#define GPIOD_PIN4 4U
#define GPIOD_PIN5 5U
#define GPIOD_PIN6 6U
#define GPIOD_PIN7 7U
#define GPIOD_PIN8 8U
#define GPIOD_PIN9 9U
#define GPIOD_PIN10 10U
#define GPIOD_PIN11 11U
#define GPIOD_PIN12 12U
#define GPIOD_PIN13 13U
#define GPIOD_PIN14 14U
#define GPIOD_PIN15 15U
#define GPIOE_PIN0 0U
#define GPIOE_PIN1 1U
#define GPIOE_PIN2 2U
#define GPIOE_PIN3 3U
#define GPIOE_PIN4 4U
#define GPIOE_PIN5 5U
#define GPIOE_PIN6 6U
#define GPIOE_PIN7 7U
#define GPIOE_PIN8 8U
#define GPIOE_PIN9 9U
#define GPIOE_PIN10 10U
#define GPIOE_PIN11 11U
#define GPIOE_PIN12 12U
#define GPIOE_PIN13 13U
#define GPIOE_PIN14 14U
#define GPIOE_PIN15 15U
#define GPIOF_OSC_IN 0U
#define GPIOF_OSC_OUT 1U
#define GPIOF_PIN2 2U
#define GPIOF_PIN3 3U
#define GPIOF_PIN4 4U
#define GPIOF_PIN5 5U
#define GPIOF_PIN6 6U
#define GPIOF_PIN7 7U
#define GPIOF_PIN8 8U
#define GPIOF_PIN9 9U
#define GPIOF_PIN10 10U
#define GPIOF_PIN11 11U
#define GPIOF_PIN12 12U
#define GPIOF_PIN13 13U
#define GPIOF_PIN14 14U
#define GPIOF_PIN15 15U
/*
* IO lines assignments.
*/
#define LINE_BUTTON PAL_LINE(GPIOA, 0U)
#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U)
#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U)
#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U)
#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U)
#define LINE_LED_RED PAL_LINE(GPIOC, 6U)
#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U)
#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U)
#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U)
#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U)
#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U)
#define LINE_OSC_IN PAL_LINE(GPIOF, 0U)
#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U)
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
* Please refer to the STM32 Reference Manual for details.
*/
#define PIN_MODE_INPUT(n) (0U << ((n) * 2U))
#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U))
#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U))
#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U))
#define PIN_ODR_LOW(n) (0U << (n))
#define PIN_ODR_HIGH(n) (1U << (n))
#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U))
#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U))
#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U))
#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U))
#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U))
#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U))
#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U))
#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
/*
* GPIOA setup:
*
* PA0 - BUTTON (input floating).
* PA1 - PIN1 (input pullup).
* PA2 - PIN2 (input pullup).
* PA3 - PIN3 (input pullup).
* PA4 - PIN4 (input pullup).
* PA5 - PIN5 (input pullup).
* PA6 - PIN6 (input pullup).
* PA7 - PIN7 (input pullup).
* PA8 - PIN8 (input pullup).
* PA9 - PIN9 (input pullup).
* PA10 - PIN10 (input pullup).
* PA11 - USB_DM (input floating).
* PA12 - USB_DP (input floating).
* PA13 - SWDIO (alternate 0).
* PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \
PIN_MODE_INPUT(GPIOA_PIN1) | \
PIN_MODE_INPUT(GPIOA_PIN2) | \
PIN_MODE_INPUT(GPIOA_PIN3) | \
PIN_MODE_INPUT(GPIOA_PIN4) | \
PIN_MODE_INPUT(GPIOA_PIN5) | \
PIN_MODE_INPUT(GPIOA_PIN6) | \
PIN_MODE_INPUT(GPIOA_PIN7) | \
PIN_MODE_INPUT(GPIOA_PIN8) | \
PIN_MODE_INPUT(GPIOA_PIN9) | \
PIN_MODE_INPUT(GPIOA_PIN10) | \
PIN_MODE_INPUT(GPIOA_USB_DM) | \
PIN_MODE_INPUT(GPIOA_USB_DP) | \
PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
PIN_MODE_INPUT(GPIOA_PIN15))
#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \
PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \
PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \
PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \
PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \
PIN_PUPDR_PULLUP(GPIOA_PIN1) | \
PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
PIN_PUPDR_PULLUP(GPIOA_PIN5) | \
PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
PIN_PUPDR_PULLUP(GPIOA_PIN7) | \
PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
PIN_PUPDR_PULLUP(GPIOA_PIN15))
#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \
PIN_ODR_HIGH(GPIOA_PIN1) | \
PIN_ODR_HIGH(GPIOA_PIN2) | \
PIN_ODR_HIGH(GPIOA_PIN3) | \
PIN_ODR_HIGH(GPIOA_PIN4) | \
PIN_ODR_HIGH(GPIOA_PIN5) | \
PIN_ODR_HIGH(GPIOA_PIN6) | \
PIN_ODR_HIGH(GPIOA_PIN7) | \
PIN_ODR_HIGH(GPIOA_PIN8) | \
PIN_ODR_HIGH(GPIOA_PIN9) | \
PIN_ODR_HIGH(GPIOA_PIN10) | \
PIN_ODR_HIGH(GPIOA_USB_DM) | \
PIN_ODR_HIGH(GPIOA_USB_DP) | \
PIN_ODR_HIGH(GPIOA_SWDIO) | \
PIN_ODR_HIGH(GPIOA_SWCLK) | \
PIN_ODR_HIGH(GPIOA_PIN15))
#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \
PIN_AFIO_AF(GPIOA_PIN1, 0U) | \
PIN_AFIO_AF(GPIOA_PIN2, 0U) | \
PIN_AFIO_AF(GPIOA_PIN3, 0U) | \
PIN_AFIO_AF(GPIOA_PIN4, 0U) | \
PIN_AFIO_AF(GPIOA_PIN5, 0U) | \
PIN_AFIO_AF(GPIOA_PIN6, 0U) | \
PIN_AFIO_AF(GPIOA_PIN7, 0U))
#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \
PIN_AFIO_AF(GPIOA_PIN9, 0U) | \
PIN_AFIO_AF(GPIOA_PIN10, 0U) | \
PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \
PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \
PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \
PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \
PIN_AFIO_AF(GPIOA_PIN15, 0U))
/*
* GPIOB setup:
*
* PB0 - PIN0 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - PIN3 (input pullup).
* PB4 - PIN4 (input pullup).
* PB5 - PIN5 (input pullup).
* PB6 - PIN6 (input pullup).
* PB7 - PIN7 (input pullup).
* PB8 - PIN8 (input pullup).
* PB9 - PIN9 (input pullup).
* PB10 - PIN10 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
* PB13 - SPI2_SCK (alternate 0).
* PB14 - SPI2_MISO (alternate 0).
* PB15 - SPI2_MOSI (alternate 0).
*/
#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_INPUT(GPIOB_PIN3) | \
PIN_MODE_INPUT(GPIOB_PIN4) | \
PIN_MODE_INPUT(GPIOB_PIN5) | \
PIN_MODE_INPUT(GPIOB_PIN6) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
PIN_MODE_INPUT(GPIOB_PIN8) | \
PIN_MODE_INPUT(GPIOB_PIN9) | \
PIN_MODE_INPUT(GPIOB_PIN10) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \
PIN_OSPEED_HIGH(GPIOB_PIN2) | \
PIN_OSPEED_HIGH(GPIOB_PIN3) | \
PIN_OSPEED_HIGH(GPIOB_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_PIN3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
PIN_PUPDR_PULLUP(GPIOB_PIN6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
PIN_ODR_HIGH(GPIOB_PIN1) | \
PIN_ODR_HIGH(GPIOB_PIN2) | \
PIN_ODR_HIGH(GPIOB_PIN3) | \
PIN_ODR_HIGH(GPIOB_PIN4) | \
PIN_ODR_HIGH(GPIOB_PIN5) | \
PIN_ODR_HIGH(GPIOB_PIN6) | \
PIN_ODR_HIGH(GPIOB_PIN7) | \
PIN_ODR_HIGH(GPIOB_PIN8) | \
PIN_ODR_HIGH(GPIOB_PIN9) | \
PIN_ODR_HIGH(GPIOB_PIN10) | \
PIN_ODR_HIGH(GPIOB_PIN11) | \
PIN_ODR_HIGH(GPIOB_PIN12) | \
PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \
PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \
PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \
PIN_AFIO_AF(GPIOB_PIN1, 0U) | \
PIN_AFIO_AF(GPIOB_PIN2, 0U) | \
PIN_AFIO_AF(GPIOB_PIN3, 0U) | \
PIN_AFIO_AF(GPIOB_PIN4, 0U) | \
PIN_AFIO_AF(GPIOB_PIN5, 0U) | \
PIN_AFIO_AF(GPIOB_PIN6, 0U) | \
PIN_AFIO_AF(GPIOB_PIN7, 0U))
#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \
PIN_AFIO_AF(GPIOB_PIN9, 0U) | \
PIN_AFIO_AF(GPIOB_PIN10, 0U) | \
PIN_AFIO_AF(GPIOB_PIN11, 0U) | \
PIN_AFIO_AF(GPIOB_PIN12, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
/*
* GPIOC setup:
*
* PC0 - MEMS_CS (output pushpull maximum).
* PC1 - PIN1 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
* PC5 - PIN5 (input pullup).
* PC6 - LED_RED (output pushpull maximum).
* PC7 - LED_BLUE (output pushpull maximum).
* PC8 - LED_ORANGE (output pushpull maximum).
* PC9 - LED_GREEN (output pushpull maximum).
* PC10 - PIN10 (input pullup).
* PC11 - PIN11 (input pullup).
* PC12 - PIN12 (input pullup).
* PC13 - PIN13 (input pullup).
* PC14 - OSC32_IN (input floating).
* PC15 - OSC32_OUT (input floating).
*/
#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \
PIN_MODE_INPUT(GPIOC_PIN1) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
PIN_MODE_INPUT(GPIOC_PIN5) | \
PIN_MODE_OUTPUT(GPIOC_LED_RED) | \
PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \
PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \
PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \
PIN_MODE_INPUT(GPIOC_PIN10) | \
PIN_MODE_INPUT(GPIOC_PIN11) | \
PIN_MODE_INPUT(GPIOC_PIN12) | \
PIN_MODE_INPUT(GPIOC_PIN13) | \
PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
PIN_MODE_INPUT(GPIOC_OSC32_OUT))
#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \
PIN_OSPEED_HIGH(GPIOC_LED_RED) | \
PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \
PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \
PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \
PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \
PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \
PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \
PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \
PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \
PIN_ODR_HIGH(GPIOC_PIN1) | \
PIN_ODR_HIGH(GPIOC_PIN2) | \
PIN_ODR_HIGH(GPIOC_PIN3) | \
PIN_ODR_HIGH(GPIOC_PIN4) | \
PIN_ODR_HIGH(GPIOC_PIN5) | \
PIN_ODR_LOW(GPIOC_LED_RED) | \
PIN_ODR_LOW(GPIOC_LED_BLUE) | \
PIN_ODR_LOW(GPIOC_LED_ORANGE) | \
PIN_ODR_LOW(GPIOC_LED_GREEN) | \
PIN_ODR_HIGH(GPIOC_PIN10) | \
PIN_ODR_HIGH(GPIOC_PIN11) | \
PIN_ODR_HIGH(GPIOC_PIN12) | \
PIN_ODR_HIGH(GPIOC_PIN13) | \
PIN_ODR_HIGH(GPIOC_OSC32_IN) | \
PIN_ODR_HIGH(GPIOC_OSC32_OUT))
#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \
PIN_AFIO_AF(GPIOC_PIN1, 0U) | \
PIN_AFIO_AF(GPIOC_PIN2, 0U) | \
PIN_AFIO_AF(GPIOC_PIN3, 0U) | \
PIN_AFIO_AF(GPIOC_PIN4, 0U) | \
PIN_AFIO_AF(GPIOC_PIN5, 0U) | \
PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \
PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \
PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \
PIN_AFIO_AF(GPIOC_PIN10, 0U) | \
PIN_AFIO_AF(GPIOC_PIN11, 0U) | \
PIN_AFIO_AF(GPIOC_PIN12, 0U) | \
PIN_AFIO_AF(GPIOC_PIN13, 0U) | \
PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \
PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
/*
* GPIOD setup:
*
* PD0 - PIN0 (input pullup).
* PD1 - PIN1 (input pullup).
* PD2 - PIN2 (input pullup).
* PD3 - PIN3 (input pullup).
* PD4 - PIN4 (input pullup).
* PD5 - PIN5 (input pullup).
* PD6 - PIN6 (input pullup).
* PD7 - PIN7 (input pullup).
* PD8 - PIN8 (input pullup).
* PD9 - PIN9 (input pullup).
* PD10 - PIN10 (input pullup).
* PD11 - PIN11 (input pullup).
* PD12 - PIN12 (input pullup).
* PD13 - PIN13 (input pullup).
* PD14 - PIN14 (input pullup).
* PD15 - PIN15 (input pullup).
*/
#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
PIN_MODE_INPUT(GPIOD_PIN1) | \
PIN_MODE_INPUT(GPIOD_PIN2) | \
PIN_MODE_INPUT(GPIOD_PIN3) | \
PIN_MODE_INPUT(GPIOD_PIN4) | \
PIN_MODE_INPUT(GPIOD_PIN5) | \
PIN_MODE_INPUT(GPIOD_PIN6) | \
PIN_MODE_INPUT(GPIOD_PIN7) | \
PIN_MODE_INPUT(GPIOD_PIN8) | \
PIN_MODE_INPUT(GPIOD_PIN9) | \
PIN_MODE_INPUT(GPIOD_PIN10) | \
PIN_MODE_INPUT(GPIOD_PIN11) | \
PIN_MODE_INPUT(GPIOD_PIN12) | \
PIN_MODE_INPUT(GPIOD_PIN13) | \
PIN_MODE_INPUT(GPIOD_PIN14) | \
PIN_MODE_INPUT(GPIOD_PIN15))
#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN15))
#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
PIN_PUPDR_PULLUP(GPIOD_PIN15))
#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
PIN_ODR_HIGH(GPIOD_PIN1) | \
PIN_ODR_HIGH(GPIOD_PIN2) | \
PIN_ODR_HIGH(GPIOD_PIN3) | \
PIN_ODR_HIGH(GPIOD_PIN4) | \
PIN_ODR_HIGH(GPIOD_PIN5) | \
PIN_ODR_HIGH(GPIOD_PIN6) | \
PIN_ODR_HIGH(GPIOD_PIN7) | \
PIN_ODR_HIGH(GPIOD_PIN8) | \
PIN_ODR_HIGH(GPIOD_PIN9) | \
PIN_ODR_HIGH(GPIOD_PIN10) | \
PIN_ODR_HIGH(GPIOD_PIN11) | \
PIN_ODR_HIGH(GPIOD_PIN12) | \
PIN_ODR_HIGH(GPIOD_PIN13) | \
PIN_ODR_HIGH(GPIOD_PIN14) | \
PIN_ODR_HIGH(GPIOD_PIN15))
#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \
PIN_AFIO_AF(GPIOD_PIN1, 0U) | \
PIN_AFIO_AF(GPIOD_PIN2, 0U) | \
PIN_AFIO_AF(GPIOD_PIN3, 0U) | \
PIN_AFIO_AF(GPIOD_PIN4, 0U) | \
PIN_AFIO_AF(GPIOD_PIN5, 0U) | \
PIN_AFIO_AF(GPIOD_PIN6, 0U) | \
PIN_AFIO_AF(GPIOD_PIN7, 0U))
#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \
PIN_AFIO_AF(GPIOD_PIN9, 0U) | \
PIN_AFIO_AF(GPIOD_PIN10, 0U) | \
PIN_AFIO_AF(GPIOD_PIN11, 0U) | \
PIN_AFIO_AF(GPIOD_PIN12, 0U) | \
PIN_AFIO_AF(GPIOD_PIN13, 0U) | \
PIN_AFIO_AF(GPIOD_PIN14, 0U) | \
PIN_AFIO_AF(GPIOD_PIN15, 0U))
/*
* GPIOE setup:
*
* PE0 - PIN0 (input pullup).
* PE1 - PIN1 (input pullup).
* PE2 - PIN2 (input pullup).
* PE3 - PIN3 (input pullup).
* PE4 - PIN4 (input pullup).
* PE5 - PIN5 (input pullup).
* PE6 - PIN6 (input pullup).
* PE7 - PIN7 (input pullup).
* PE8 - PIN8 (input pullup).
* PE9 - PIN9 (input pullup).
* PE10 - PIN10 (input pullup).
* PE11 - PIN11 (input pullup).
* PE12 - PIN12 (input pullup).
* PE13 - PIN13 (input pullup).
* PE14 - PIN14 (input pullup).
* PE15 - PIN15 (input pullup).
*/
#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
PIN_MODE_INPUT(GPIOE_PIN1) | \
PIN_MODE_INPUT(GPIOE_PIN2) | \
PIN_MODE_INPUT(GPIOE_PIN3) | \
PIN_MODE_INPUT(GPIOE_PIN4) | \
PIN_MODE_INPUT(GPIOE_PIN5) | \
PIN_MODE_INPUT(GPIOE_PIN6) | \
PIN_MODE_INPUT(GPIOE_PIN7) | \
PIN_MODE_INPUT(GPIOE_PIN8) | \
PIN_MODE_INPUT(GPIOE_PIN9) | \
PIN_MODE_INPUT(GPIOE_PIN10) | \
PIN_MODE_INPUT(GPIOE_PIN11) | \
PIN_MODE_INPUT(GPIOE_PIN12) | \
PIN_MODE_INPUT(GPIOE_PIN13) | \
PIN_MODE_INPUT(GPIOE_PIN14) | \
PIN_MODE_INPUT(GPIOE_PIN15))
#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN15))
#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
PIN_PUPDR_PULLUP(GPIOE_PIN2) | \
PIN_PUPDR_PULLUP(GPIOE_PIN3) | \
PIN_PUPDR_PULLUP(GPIOE_PIN4) | \
PIN_PUPDR_PULLUP(GPIOE_PIN5) | \
PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
PIN_PUPDR_PULLUP(GPIOE_PIN8) | \
PIN_PUPDR_PULLUP(GPIOE_PIN9) | \
PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
PIN_PUPDR_PULLUP(GPIOE_PIN11) | \
PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
PIN_PUPDR_PULLUP(GPIOE_PIN13) | \
PIN_PUPDR_PULLUP(GPIOE_PIN14) | \
PIN_PUPDR_PULLUP(GPIOE_PIN15))
#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
PIN_ODR_HIGH(GPIOE_PIN1) | \
PIN_ODR_HIGH(GPIOE_PIN2) | \
PIN_ODR_HIGH(GPIOE_PIN3) | \
PIN_ODR_HIGH(GPIOE_PIN4) | \
PIN_ODR_HIGH(GPIOE_PIN5) | \
PIN_ODR_HIGH(GPIOE_PIN6) | \
PIN_ODR_HIGH(GPIOE_PIN7) | \
PIN_ODR_HIGH(GPIOE_PIN8) | \
PIN_ODR_HIGH(GPIOE_PIN9) | \
PIN_ODR_HIGH(GPIOE_PIN10) | \
PIN_ODR_HIGH(GPIOE_PIN11) | \
PIN_ODR_HIGH(GPIOE_PIN12) | \
PIN_ODR_HIGH(GPIOE_PIN13) | \
PIN_ODR_HIGH(GPIOE_PIN14) | \
PIN_ODR_HIGH(GPIOE_PIN15))
#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \
PIN_AFIO_AF(GPIOE_PIN1, 0U) | \
PIN_AFIO_AF(GPIOE_PIN2, 0U) | \
PIN_AFIO_AF(GPIOE_PIN3, 0U) | \
PIN_AFIO_AF(GPIOE_PIN4, 0U) | \
PIN_AFIO_AF(GPIOE_PIN5, 0U) | \
PIN_AFIO_AF(GPIOE_PIN6, 0U) | \
PIN_AFIO_AF(GPIOE_PIN7, 0U))
#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \
PIN_AFIO_AF(GPIOE_PIN9, 0U) | \
PIN_AFIO_AF(GPIOE_PIN10, 0U) | \
PIN_AFIO_AF(GPIOE_PIN11, 0U) | \
PIN_AFIO_AF(GPIOE_PIN12, 0U) | \
PIN_AFIO_AF(GPIOE_PIN13, 0U) | \
PIN_AFIO_AF(GPIOE_PIN14, 0U) | \
PIN_AFIO_AF(GPIOE_PIN15, 0U))
/*
* GPIOF setup:
*
* PF0 - OSC_IN (input floating).
* PF1 - OSC_OUT (input floating).
* PF2 - PIN2 (input pullup).
* PF3 - PIN3 (input pullup).
* PF4 - PIN4 (input pullup).
* PF5 - PIN5 (input pullup).
* PF6 - PIN6 (input pullup).
* PF7 - PIN7 (input pullup).
* PF8 - PIN8 (input pullup).
* PF9 - PIN9 (input pullup).
* PF10 - PIN10 (input pullup).
* PF11 - PIN11 (input pullup).
* PF12 - PIN12 (input pullup).
* PF13 - PIN13 (input pullup).
* PF14 - PIN14 (input pullup).
* PF15 - PIN15 (input pullup).
*/
#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \
PIN_MODE_INPUT(GPIOF_OSC_OUT) | \
PIN_MODE_INPUT(GPIOF_PIN2) | \
PIN_MODE_INPUT(GPIOF_PIN3) | \
PIN_MODE_INPUT(GPIOF_PIN4) | \
PIN_MODE_INPUT(GPIOF_PIN5) | \
PIN_MODE_INPUT(GPIOF_PIN6) | \
PIN_MODE_INPUT(GPIOF_PIN7) | \
PIN_MODE_INPUT(GPIOF_PIN8) | \
PIN_MODE_INPUT(GPIOF_PIN9) | \
PIN_MODE_INPUT(GPIOF_PIN10) | \
PIN_MODE_INPUT(GPIOF_PIN11) | \
PIN_MODE_INPUT(GPIOF_PIN12) | \
PIN_MODE_INPUT(GPIOF_PIN13) | \
PIN_MODE_INPUT(GPIOF_PIN14) | \
PIN_MODE_INPUT(GPIOF_PIN15))
#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \
PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \
PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN15))
#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \
PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \
PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
PIN_PUPDR_PULLUP(GPIOF_PIN15))
#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \
PIN_ODR_HIGH(GPIOF_OSC_OUT) | \
PIN_ODR_HIGH(GPIOF_PIN2) | \
PIN_ODR_HIGH(GPIOF_PIN3) | \
PIN_ODR_HIGH(GPIOF_PIN4) | \
PIN_ODR_HIGH(GPIOF_PIN5) | \
PIN_ODR_HIGH(GPIOF_PIN6) | \
PIN_ODR_HIGH(GPIOF_PIN7) | \
PIN_ODR_HIGH(GPIOF_PIN8) | \
PIN_ODR_HIGH(GPIOF_PIN9) | \
PIN_ODR_HIGH(GPIOF_PIN10) | \
PIN_ODR_HIGH(GPIOF_PIN11) | \
PIN_ODR_HIGH(GPIOF_PIN12) | \
PIN_ODR_HIGH(GPIOF_PIN13) | \
PIN_ODR_HIGH(GPIOF_PIN14) | \
PIN_ODR_HIGH(GPIOF_PIN15))
#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \
PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \
PIN_AFIO_AF(GPIOF_PIN2, 0U) | \
PIN_AFIO_AF(GPIOF_PIN3, 0U) | \
PIN_AFIO_AF(GPIOF_PIN4, 0U) | \
PIN_AFIO_AF(GPIOF_PIN5, 0U) | \
PIN_AFIO_AF(GPIOF_PIN6, 0U) | \
PIN_AFIO_AF(GPIOF_PIN7, 0U))
#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \
PIN_AFIO_AF(GPIOF_PIN9, 0U) | \
PIN_AFIO_AF(GPIOF_PIN10, 0U) | \
PIN_AFIO_AF(GPIOF_PIN11, 0U) | \
PIN_AFIO_AF(GPIOF_PIN12, 0U) | \
PIN_AFIO_AF(GPIOF_PIN13, 0U) | \
PIN_AFIO_AF(GPIOF_PIN14, 0U) | \
PIN_AFIO_AF(GPIOF_PIN15, 0U))
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */
#endif /* BOARD_H */

View File

@ -1,5 +0,0 @@
# List of all the board related files.
BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
# Required include directories
BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

View File

@ -1,703 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<!-- STM32F0xx board Template -->
<board
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
<configuration_settings>
<templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
<output_path>..</output_path>
<hal_version>3.0.x</hal_version>
</configuration_settings>
<board_name>ST STM32F072B-Discovery</board_name>
<board_id>ST_STM32F072B_DISCOVERY</board_id>
<board_functions></board_functions>
<subtype>STM32F072xB</subtype>
<clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
LSEBypass="false" LSEDrive="3 High Drive (default)" />
<ports>
<GPIOA>
<pin0
ID="BUTTON"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID="USB_DM"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID="USB_DP"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID="SWDIO"
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin14
ID="SWCLK"
Type="PushPull"
Speed="Maximum"
Resistor="PullDown"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOA>
<GPIOB>
<pin0
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID="SPI2_SCK"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin14
ID="SPI2_MISO"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin15
ID="SPI2_MOSI"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
</GPIOB>
<GPIOC>
<pin0
ID="MEMS_CS"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Output"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID="LED_RED"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin7
ID="LED_BLUE"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin8
ID="LED_ORANGE"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" ></pin8>
<pin9
ID="LED_GREEN"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID="OSC32_IN"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID="OSC32_OUT"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOC>
<GPIOD>
<pin0
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOD>
<GPIOE>
<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
</GPIOE>
<GPIOF>
<pin0
ID="OSC_IN"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID="OSC_OUT"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOF>
</ports>
</board>

View File

@ -33,6 +33,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROW_PINS { A10, A9, A8, B12 }
#define DIODE_DIRECTION COL2ROW
#define BACKLIGHT_PIN A6
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
#define BACKLIGHT_LEVELS 6
#define BACKLIGHT_BREATHING
#define BREATHING_PERIOD 6
@ -54,16 +58,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define WS2812_SPI SPID2
#define WS2812_SPI_MOSI_PAL_MODE 0
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 1
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE
// Let VIA handle the QMK RGBLIGHT
#define VIA_QMK_RGBLIGHT_ENABLE
/*
* Feature disable options
* These options are also useful to firmware size reduction.

View File

@ -1,15 +1,10 @@
# MCU name
MCU = STM32F072
BOARD = ST_STM32F072B_DISCOVERY
# Build Options
# comment out to disable the options.
#
# project specific files
VPATH += keyboards/cannonkeys/stm32f072
SRC = keyboard.c \
led.c
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
@ -19,7 +14,7 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
CUSTOM_MATRIX = no # Custom matrix file
# BACKLIGHT_ENABLE = yes # This is broken on 072 right now
BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = spi

View File

@ -1,268 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* This file has been automatically generated using ChibiStudio board
* generator plugin. Do not edit manually.
*/
#include "hal.h"
#include "stm32_gpio.h"
/*===========================================================================*/
/* Driver local definitions. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported variables. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver local variables and types. */
/*===========================================================================*/
/**
* @brief Type of STM32 GPIO port setup.
*/
typedef struct {
uint32_t moder;
uint32_t otyper;
uint32_t ospeedr;
uint32_t pupdr;
uint32_t odr;
uint32_t afrl;
uint32_t afrh;
} gpio_setup_t;
/**
* @brief Type of STM32 GPIO initialization data.
*/
typedef struct {
#if STM32_HAS_GPIOA || defined(__DOXYGEN__)
gpio_setup_t PAData;
#endif
#if STM32_HAS_GPIOB || defined(__DOXYGEN__)
gpio_setup_t PBData;
#endif
#if STM32_HAS_GPIOC || defined(__DOXYGEN__)
gpio_setup_t PCData;
#endif
#if STM32_HAS_GPIOD || defined(__DOXYGEN__)
gpio_setup_t PDData;
#endif
#if STM32_HAS_GPIOE || defined(__DOXYGEN__)
gpio_setup_t PEData;
#endif
#if STM32_HAS_GPIOF || defined(__DOXYGEN__)
gpio_setup_t PFData;
#endif
#if STM32_HAS_GPIOG || defined(__DOXYGEN__)
gpio_setup_t PGData;
#endif
#if STM32_HAS_GPIOH || defined(__DOXYGEN__)
gpio_setup_t PHData;
#endif
#if STM32_HAS_GPIOI || defined(__DOXYGEN__)
gpio_setup_t PIData;
#endif
#if STM32_HAS_GPIOJ || defined(__DOXYGEN__)
gpio_setup_t PJData;
#endif
#if STM32_HAS_GPIOK || defined(__DOXYGEN__)
gpio_setup_t PKData;
#endif
} gpio_config_t;
/**
* @brief STM32 GPIO static initialization data.
*/
static const gpio_config_t gpio_default_config = {
#if STM32_HAS_GPIOA
{VAL_GPIOA_MODER, VAL_GPIOA_OTYPER, VAL_GPIOA_OSPEEDR, VAL_GPIOA_PUPDR,
VAL_GPIOA_ODR, VAL_GPIOA_AFRL, VAL_GPIOA_AFRH},
#endif
#if STM32_HAS_GPIOB
{VAL_GPIOB_MODER, VAL_GPIOB_OTYPER, VAL_GPIOB_OSPEEDR, VAL_GPIOB_PUPDR,
VAL_GPIOB_ODR, VAL_GPIOB_AFRL, VAL_GPIOB_AFRH},
#endif
#if STM32_HAS_GPIOC
{VAL_GPIOC_MODER, VAL_GPIOC_OTYPER, VAL_GPIOC_OSPEEDR, VAL_GPIOC_PUPDR,
VAL_GPIOC_ODR, VAL_GPIOC_AFRL, VAL_GPIOC_AFRH},
#endif
#if STM32_HAS_GPIOD
{VAL_GPIOD_MODER, VAL_GPIOD_OTYPER, VAL_GPIOD_OSPEEDR, VAL_GPIOD_PUPDR,
VAL_GPIOD_ODR, VAL_GPIOD_AFRL, VAL_GPIOD_AFRH},
#endif
#if STM32_HAS_GPIOE
{VAL_GPIOE_MODER, VAL_GPIOE_OTYPER, VAL_GPIOE_OSPEEDR, VAL_GPIOE_PUPDR,
VAL_GPIOE_ODR, VAL_GPIOE_AFRL, VAL_GPIOE_AFRH},
#endif
#if STM32_HAS_GPIOF
{VAL_GPIOF_MODER, VAL_GPIOF_OTYPER, VAL_GPIOF_OSPEEDR, VAL_GPIOF_PUPDR,
VAL_GPIOF_ODR, VAL_GPIOF_AFRL, VAL_GPIOF_AFRH},
#endif
#if STM32_HAS_GPIOG
{VAL_GPIOG_MODER, VAL_GPIOG_OTYPER, VAL_GPIOG_OSPEEDR, VAL_GPIOG_PUPDR,
VAL_GPIOG_ODR, VAL_GPIOG_AFRL, VAL_GPIOG_AFRH},
#endif
#if STM32_HAS_GPIOH
{VAL_GPIOH_MODER, VAL_GPIOH_OTYPER, VAL_GPIOH_OSPEEDR, VAL_GPIOH_PUPDR,
VAL_GPIOH_ODR, VAL_GPIOH_AFRL, VAL_GPIOH_AFRH},
#endif
#if STM32_HAS_GPIOI
{VAL_GPIOI_MODER, VAL_GPIOI_OTYPER, VAL_GPIOI_OSPEEDR, VAL_GPIOI_PUPDR,
VAL_GPIOI_ODR, VAL_GPIOI_AFRL, VAL_GPIOI_AFRH},
#endif
#if STM32_HAS_GPIOJ
{VAL_GPIOJ_MODER, VAL_GPIOJ_OTYPER, VAL_GPIOJ_OSPEEDR, VAL_GPIOJ_PUPDR,
VAL_GPIOJ_ODR, VAL_GPIOJ_AFRL, VAL_GPIOJ_AFRH},
#endif
#if STM32_HAS_GPIOK
{VAL_GPIOK_MODER, VAL_GPIOK_OTYPER, VAL_GPIOK_OSPEEDR, VAL_GPIOK_PUPDR,
VAL_GPIOK_ODR, VAL_GPIOK_AFRL, VAL_GPIOK_AFRH}
#endif
};
/*===========================================================================*/
/* Driver local functions. */
/*===========================================================================*/
static void gpio_init(stm32_gpio_t *gpiop, const gpio_setup_t *config) {
gpiop->OTYPER = config->otyper;
gpiop->OSPEEDR = config->ospeedr;
gpiop->PUPDR = config->pupdr;
gpiop->ODR = config->odr;
gpiop->AFRL = config->afrl;
gpiop->AFRH = config->afrh;
gpiop->MODER = config->moder;
}
static void stm32_gpio_init(void) {
/* Enabling GPIO-related clocks, the mask comes from the
registry header file.*/
rccResetAHB(STM32_GPIO_EN_MASK);
rccEnableAHB(STM32_GPIO_EN_MASK, true);
/* Initializing all the defined GPIO ports.*/
#if STM32_HAS_GPIOA
gpio_init(GPIOA, &gpio_default_config.PAData);
#endif
#if STM32_HAS_GPIOB
gpio_init(GPIOB, &gpio_default_config.PBData);
#endif
#if STM32_HAS_GPIOC
gpio_init(GPIOC, &gpio_default_config.PCData);
#endif
#if STM32_HAS_GPIOD
gpio_init(GPIOD, &gpio_default_config.PDData);
#endif
#if STM32_HAS_GPIOE
gpio_init(GPIOE, &gpio_default_config.PEData);
#endif
#if STM32_HAS_GPIOF
gpio_init(GPIOF, &gpio_default_config.PFData);
#endif
#if STM32_HAS_GPIOG
gpio_init(GPIOG, &gpio_default_config.PGData);
#endif
#if STM32_HAS_GPIOH
gpio_init(GPIOH, &gpio_default_config.PHData);
#endif
#if STM32_HAS_GPIOI
gpio_init(GPIOI, &gpio_default_config.PIData);
#endif
#if STM32_HAS_GPIOJ
gpio_init(GPIOJ, &gpio_default_config.PJData);
#endif
#if STM32_HAS_GPIOK
gpio_init(GPIOK, &gpio_default_config.PKData);
#endif
}
/*===========================================================================*/
/* Driver interrupt handlers. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver exported functions. */
/*===========================================================================*/
/**
* @brief Early initialization code.
* @details GPIO ports and system clocks are initialized before everything
* else.
*/
void __early_init(void) {
extern void enter_bootloader_mode_if_requested(void);
enter_bootloader_mode_if_requested();
stm32_gpio_init();
stm32_clock_init();
}
#if HAL_USE_SDC || defined(__DOXYGEN__)
/**
* @brief SDC card detection.
*/
bool sdc_lld_is_card_inserted(SDCDriver *sdcp) {
(void)sdcp;
/* TODO: Fill the implementation.*/
return true;
}
/**
* @brief SDC card write protection detection.
*/
bool sdc_lld_is_write_protected(SDCDriver *sdcp) {
(void)sdcp;
/* TODO: Fill the implementation.*/
return false;
}
#endif /* HAL_USE_SDC */
#if HAL_USE_MMC_SPI || defined(__DOXYGEN__)
/**
* @brief MMC_SPI card detection.
*/
bool mmc_lld_is_card_inserted(MMCDriver *mmcp) {
(void)mmcp;
/* TODO: Fill the implementation.*/
return true;
}
/**
* @brief MMC_SPI card write protection detection.
*/
bool mmc_lld_is_write_protected(MMCDriver *mmcp) {
(void)mmcp;
/* TODO: Fill the implementation.*/
return false;
}
#endif
/**
* @brief Board-specific initialization code.
* @todo Add your board-specific code, if any.
*/
void boardInit(void) {
SYSCFG->CFGR1 |= SYSCFG_CFGR1_I2C1_DMA_RMP;
SYSCFG->CFGR1 &= ~(SYSCFG_CFGR1_SPI2_DMA_RMP);
}

View File

@ -1,940 +0,0 @@
/*
ChibiOS - Copyright (C) 2006..2016 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
/*
* This file has been automatically generated using ChibiStudio board
* generator plugin. Do not edit manually.
*/
#ifndef BOARD_H
#define BOARD_H
/*===========================================================================*/
/* Driver constants. */
/*===========================================================================*/
/*
* Setup for ST STM32F072B-Discovery board.
*/
/*
* Board identifier.
*/
#define BOARD_ST_STM32F072B_DISCOVERY
#define BOARD_NAME "ST STM32F072B-Discovery"
/*
* Board oscillators-related settings.
* NOTE: HSE not fitted.
*/
#if !defined(STM32_LSECLK)
#define STM32_LSECLK 32768
#endif
#define STM32_LSEDRV (3U << 3U)
#if !defined(STM32_HSECLK)
#define STM32_HSECLK 0U
#endif
#define STM32_HSE_BYPASS
/*
* MCU type as defined in the ST header.
*/
#define STM32F072xB
/*
* IO pins assignments.
*/
#define GPIOA_BUTTON 0U
#define GPIOA_PIN1 1U
#define GPIOA_PIN2 2U
#define GPIOA_PIN3 3U
#define GPIOA_PIN4 4U
#define GPIOA_PIN5 5U
#define GPIOA_PIN6 6U
#define GPIOA_PIN7 7U
#define GPIOA_PIN8 8U
#define GPIOA_PIN9 9U
#define GPIOA_PIN10 10U
#define GPIOA_USB_DM 11U
#define GPIOA_USB_DP 12U
#define GPIOA_SWDIO 13U
#define GPIOA_SWCLK 14U
#define GPIOA_PIN15 15U
#define GPIOB_PIN0 0U
#define GPIOB_PIN1 1U
#define GPIOB_PIN2 2U
#define GPIOB_PIN3 3U
#define GPIOB_PIN4 4U
#define GPIOB_PIN5 5U
#define GPIOB_PIN6 6U
#define GPIOB_PIN7 7U
#define GPIOB_PIN8 8U
#define GPIOB_PIN9 9U
#define GPIOB_PIN10 10U
#define GPIOB_PIN11 11U
#define GPIOB_PIN12 12U
#define GPIOB_SPI2_SCK 13U
#define GPIOB_SPI2_MISO 14U
#define GPIOB_SPI2_MOSI 15U
#define GPIOC_MEMS_CS 0U
#define GPIOC_PIN1 1U
#define GPIOC_PIN2 2U
#define GPIOC_PIN3 3U
#define GPIOC_PIN4 4U
#define GPIOC_PIN5 5U
#define GPIOC_LED_RED 6U
#define GPIOC_LED_BLUE 7U
#define GPIOC_LED_ORANGE 8U
#define GPIOC_LED_GREEN 9U
#define GPIOC_PIN10 10U
#define GPIOC_PIN11 11U
#define GPIOC_PIN12 12U
#define GPIOC_PIN13 13U
#define GPIOC_OSC32_IN 14U
#define GPIOC_OSC32_OUT 15U
#define GPIOD_PIN0 0U
#define GPIOD_PIN1 1U
#define GPIOD_PIN2 2U
#define GPIOD_PIN3 3U
#define GPIOD_PIN4 4U
#define GPIOD_PIN5 5U
#define GPIOD_PIN6 6U
#define GPIOD_PIN7 7U
#define GPIOD_PIN8 8U
#define GPIOD_PIN9 9U
#define GPIOD_PIN10 10U
#define GPIOD_PIN11 11U
#define GPIOD_PIN12 12U
#define GPIOD_PIN13 13U
#define GPIOD_PIN14 14U
#define GPIOD_PIN15 15U
#define GPIOE_PIN0 0U
#define GPIOE_PIN1 1U
#define GPIOE_PIN2 2U
#define GPIOE_PIN3 3U
#define GPIOE_PIN4 4U
#define GPIOE_PIN5 5U
#define GPIOE_PIN6 6U
#define GPIOE_PIN7 7U
#define GPIOE_PIN8 8U
#define GPIOE_PIN9 9U
#define GPIOE_PIN10 10U
#define GPIOE_PIN11 11U
#define GPIOE_PIN12 12U
#define GPIOE_PIN13 13U
#define GPIOE_PIN14 14U
#define GPIOE_PIN15 15U
#define GPIOF_OSC_IN 0U
#define GPIOF_OSC_OUT 1U
#define GPIOF_PIN2 2U
#define GPIOF_PIN3 3U
#define GPIOF_PIN4 4U
#define GPIOF_PIN5 5U
#define GPIOF_PIN6 6U
#define GPIOF_PIN7 7U
#define GPIOF_PIN8 8U
#define GPIOF_PIN9 9U
#define GPIOF_PIN10 10U
#define GPIOF_PIN11 11U
#define GPIOF_PIN12 12U
#define GPIOF_PIN13 13U
#define GPIOF_PIN14 14U
#define GPIOF_PIN15 15U
/*
* IO lines assignments.
*/
#define LINE_BUTTON PAL_LINE(GPIOA, 0U)
#define LINE_USB_DM PAL_LINE(GPIOA, 11U)
#define LINE_USB_DP PAL_LINE(GPIOA, 12U)
#define LINE_SWDIO PAL_LINE(GPIOA, 13U)
#define LINE_SWCLK PAL_LINE(GPIOA, 14U)
#define LINE_SPI2_SCK PAL_LINE(GPIOB, 13U)
#define LINE_SPI2_MISO PAL_LINE(GPIOB, 14U)
#define LINE_SPI2_MOSI PAL_LINE(GPIOB, 15U)
#define LINE_MEMS_CS PAL_LINE(GPIOC, 0U)
#define LINE_LED_RED PAL_LINE(GPIOC, 6U)
#define LINE_LED_BLUE PAL_LINE(GPIOC, 7U)
#define LINE_LED_ORANGE PAL_LINE(GPIOC, 8U)
#define LINE_LED_GREEN PAL_LINE(GPIOC, 9U)
#define LINE_OSC32_IN PAL_LINE(GPIOC, 14U)
#define LINE_OSC32_OUT PAL_LINE(GPIOC, 15U)
#define LINE_OSC_IN PAL_LINE(GPIOF, 0U)
#define LINE_OSC_OUT PAL_LINE(GPIOF, 1U)
/*===========================================================================*/
/* Driver pre-compile time settings. */
/*===========================================================================*/
/*===========================================================================*/
/* Derived constants and error checks. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver data structures and types. */
/*===========================================================================*/
/*===========================================================================*/
/* Driver macros. */
/*===========================================================================*/
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
* Please refer to the STM32 Reference Manual for details.
*/
#define PIN_MODE_INPUT(n) (0U << ((n) * 2U))
#define PIN_MODE_OUTPUT(n) (1U << ((n) * 2U))
#define PIN_MODE_ALTERNATE(n) (2U << ((n) * 2U))
#define PIN_MODE_ANALOG(n) (3U << ((n) * 2U))
#define PIN_ODR_LOW(n) (0U << (n))
#define PIN_ODR_HIGH(n) (1U << (n))
#define PIN_OTYPE_PUSHPULL(n) (0U << (n))
#define PIN_OTYPE_OPENDRAIN(n) (1U << (n))
#define PIN_OSPEED_VERYLOW(n) (0U << ((n) * 2U))
#define PIN_OSPEED_LOW(n) (1U << ((n) * 2U))
#define PIN_OSPEED_MEDIUM(n) (2U << ((n) * 2U))
#define PIN_OSPEED_HIGH(n) (3U << ((n) * 2U))
#define PIN_PUPDR_FLOATING(n) (0U << ((n) * 2U))
#define PIN_PUPDR_PULLUP(n) (1U << ((n) * 2U))
#define PIN_PUPDR_PULLDOWN(n) (2U << ((n) * 2U))
#define PIN_AFIO_AF(n, v) ((v) << (((n) % 8U) * 4U))
/*
* GPIOA setup:
*
* PA0 - BUTTON (input floating).
* PA1 - PIN1 (input pullup).
* PA2 - PIN2 (input pullup).
* PA3 - PIN3 (input pullup).
* PA4 - PIN4 (input pullup).
* PA5 - PIN5 (input pullup).
* PA6 - PIN6 (input pullup).
* PA7 - PIN7 (input pullup).
* PA8 - PIN8 (input pullup).
* PA9 - PIN9 (input pullup).
* PA10 - PIN10 (input pullup).
* PA11 - USB_DM (input floating).
* PA12 - USB_DP (input floating).
* PA13 - SWDIO (alternate 0).
* PA14 - SWCLK (alternate 0).
* PA15 - PIN15 (input pullup).
*/
#define VAL_GPIOA_MODER (PIN_MODE_INPUT(GPIOA_BUTTON) | \
PIN_MODE_INPUT(GPIOA_PIN1) | \
PIN_MODE_INPUT(GPIOA_PIN2) | \
PIN_MODE_INPUT(GPIOA_PIN3) | \
PIN_MODE_INPUT(GPIOA_PIN4) | \
PIN_MODE_INPUT(GPIOA_PIN5) | \
PIN_MODE_INPUT(GPIOA_PIN6) | \
PIN_MODE_INPUT(GPIOA_PIN7) | \
PIN_MODE_INPUT(GPIOA_PIN8) | \
PIN_MODE_INPUT(GPIOA_PIN9) | \
PIN_MODE_INPUT(GPIOA_PIN10) | \
PIN_MODE_INPUT(GPIOA_USB_DM) | \
PIN_MODE_INPUT(GPIOA_USB_DP) | \
PIN_MODE_ALTERNATE(GPIOA_SWDIO) | \
PIN_MODE_ALTERNATE(GPIOA_SWCLK) | \
PIN_MODE_INPUT(GPIOA_PIN15))
#define VAL_GPIOA_OTYPER (PIN_OTYPE_PUSHPULL(GPIOA_BUTTON) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOA_USB_DM) | \
PIN_OTYPE_PUSHPULL(GPIOA_USB_DP) | \
PIN_OTYPE_PUSHPULL(GPIOA_SWDIO) | \
PIN_OTYPE_PUSHPULL(GPIOA_SWCLK) | \
PIN_OTYPE_PUSHPULL(GPIOA_PIN15))
#define VAL_GPIOA_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOA_BUTTON) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOA_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOA_USB_DM) | \
PIN_OSPEED_VERYLOW(GPIOA_USB_DP) | \
PIN_OSPEED_HIGH(GPIOA_SWDIO) | \
PIN_OSPEED_HIGH(GPIOA_SWCLK) | \
PIN_OSPEED_HIGH(GPIOA_PIN15))
#define VAL_GPIOA_PUPDR (PIN_PUPDR_FLOATING(GPIOA_BUTTON) | \
PIN_PUPDR_PULLUP(GPIOA_PIN1) | \
PIN_PUPDR_PULLUP(GPIOA_PIN2) | \
PIN_PUPDR_PULLUP(GPIOA_PIN3) | \
PIN_PUPDR_PULLUP(GPIOA_PIN4) | \
PIN_PUPDR_PULLUP(GPIOA_PIN5) | \
PIN_PUPDR_PULLUP(GPIOA_PIN6) | \
PIN_PUPDR_PULLUP(GPIOA_PIN7) | \
PIN_PUPDR_PULLUP(GPIOA_PIN8) | \
PIN_PUPDR_PULLUP(GPIOA_PIN9) | \
PIN_PUPDR_PULLUP(GPIOA_PIN10) | \
PIN_PUPDR_FLOATING(GPIOA_USB_DM) | \
PIN_PUPDR_FLOATING(GPIOA_USB_DP) | \
PIN_PUPDR_PULLUP(GPIOA_SWDIO) | \
PIN_PUPDR_PULLDOWN(GPIOA_SWCLK) | \
PIN_PUPDR_PULLUP(GPIOA_PIN15))
#define VAL_GPIOA_ODR (PIN_ODR_HIGH(GPIOA_BUTTON) | \
PIN_ODR_HIGH(GPIOA_PIN1) | \
PIN_ODR_HIGH(GPIOA_PIN2) | \
PIN_ODR_HIGH(GPIOA_PIN3) | \
PIN_ODR_HIGH(GPIOA_PIN4) | \
PIN_ODR_HIGH(GPIOA_PIN5) | \
PIN_ODR_HIGH(GPIOA_PIN6) | \
PIN_ODR_HIGH(GPIOA_PIN7) | \
PIN_ODR_HIGH(GPIOA_PIN8) | \
PIN_ODR_HIGH(GPIOA_PIN9) | \
PIN_ODR_HIGH(GPIOA_PIN10) | \
PIN_ODR_HIGH(GPIOA_USB_DM) | \
PIN_ODR_HIGH(GPIOA_USB_DP) | \
PIN_ODR_HIGH(GPIOA_SWDIO) | \
PIN_ODR_HIGH(GPIOA_SWCLK) | \
PIN_ODR_HIGH(GPIOA_PIN15))
#define VAL_GPIOA_AFRL (PIN_AFIO_AF(GPIOA_BUTTON, 0U) | \
PIN_AFIO_AF(GPIOA_PIN1, 0U) | \
PIN_AFIO_AF(GPIOA_PIN2, 0U) | \
PIN_AFIO_AF(GPIOA_PIN3, 0U) | \
PIN_AFIO_AF(GPIOA_PIN4, 0U) | \
PIN_AFIO_AF(GPIOA_PIN5, 0U) | \
PIN_AFIO_AF(GPIOA_PIN6, 0U) | \
PIN_AFIO_AF(GPIOA_PIN7, 0U))
#define VAL_GPIOA_AFRH (PIN_AFIO_AF(GPIOA_PIN8, 0U) | \
PIN_AFIO_AF(GPIOA_PIN9, 0U) | \
PIN_AFIO_AF(GPIOA_PIN10, 0U) | \
PIN_AFIO_AF(GPIOA_USB_DM, 0U) | \
PIN_AFIO_AF(GPIOA_USB_DP, 0U) | \
PIN_AFIO_AF(GPIOA_SWDIO, 0U) | \
PIN_AFIO_AF(GPIOA_SWCLK, 0U) | \
PIN_AFIO_AF(GPIOA_PIN15, 0U))
/*
* GPIOB setup:
*
* PB0 - PIN0 (input pullup).
* PB1 - PIN1 (input pullup).
* PB2 - PIN2 (input pullup).
* PB3 - PIN3 (input pullup).
* PB4 - PIN4 (input pullup).
* PB5 - PIN5 (input pullup).
* PB6 - PIN6 (input pullup).
* PB7 - PIN7 (input pullup).
* PB8 - PIN8 (input pullup).
* PB9 - PIN9 (input pullup).
* PB10 - PIN10 (input pullup).
* PB11 - PIN11 (input pullup).
* PB12 - PIN12 (input pullup).
* PB13 - SPI2_SCK (alternate 0).
* PB14 - SPI2_MISO (alternate 0).
* PB15 - SPI2_MOSI (alternate 0).
*/
#define VAL_GPIOB_MODER (PIN_MODE_INPUT(GPIOB_PIN0) | \
PIN_MODE_INPUT(GPIOB_PIN1) | \
PIN_MODE_INPUT(GPIOB_PIN2) | \
PIN_MODE_INPUT(GPIOB_PIN3) | \
PIN_MODE_INPUT(GPIOB_PIN4) | \
PIN_MODE_INPUT(GPIOB_PIN5) | \
PIN_MODE_INPUT(GPIOB_PIN6) | \
PIN_MODE_INPUT(GPIOB_PIN7) | \
PIN_MODE_INPUT(GPIOB_PIN8) | \
PIN_MODE_INPUT(GPIOB_PIN9) | \
PIN_MODE_INPUT(GPIOB_PIN10) | \
PIN_MODE_INPUT(GPIOB_PIN11) | \
PIN_MODE_INPUT(GPIOB_PIN12) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_SCK) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_MISO) | \
PIN_MODE_ALTERNATE(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_OTYPER (PIN_OTYPE_PUSHPULL(GPIOB_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOB_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_SCK) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MISO) | \
PIN_OTYPE_PUSHPULL(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOB_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN1) | \
PIN_OSPEED_HIGH(GPIOB_PIN2) | \
PIN_OSPEED_HIGH(GPIOB_PIN3) | \
PIN_OSPEED_HIGH(GPIOB_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOB_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_SCK) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MISO) | \
PIN_OSPEED_VERYLOW(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_PUPDR (PIN_PUPDR_PULLUP(GPIOB_PIN0) | \
PIN_PUPDR_PULLUP(GPIOB_PIN1) | \
PIN_PUPDR_PULLUP(GPIOB_PIN2) | \
PIN_PUPDR_PULLUP(GPIOB_PIN3) | \
PIN_PUPDR_PULLUP(GPIOB_PIN4) | \
PIN_PUPDR_PULLUP(GPIOB_PIN5) | \
PIN_PUPDR_PULLUP(GPIOB_PIN6) | \
PIN_PUPDR_PULLUP(GPIOB_PIN7) | \
PIN_PUPDR_PULLUP(GPIOB_PIN8) | \
PIN_PUPDR_PULLUP(GPIOB_PIN9) | \
PIN_PUPDR_PULLUP(GPIOB_PIN10) | \
PIN_PUPDR_PULLUP(GPIOB_PIN11) | \
PIN_PUPDR_PULLUP(GPIOB_PIN12) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_SCK) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_MISO) | \
PIN_PUPDR_FLOATING(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_ODR (PIN_ODR_HIGH(GPIOB_PIN0) | \
PIN_ODR_HIGH(GPIOB_PIN1) | \
PIN_ODR_HIGH(GPIOB_PIN2) | \
PIN_ODR_HIGH(GPIOB_PIN3) | \
PIN_ODR_HIGH(GPIOB_PIN4) | \
PIN_ODR_HIGH(GPIOB_PIN5) | \
PIN_ODR_HIGH(GPIOB_PIN6) | \
PIN_ODR_HIGH(GPIOB_PIN7) | \
PIN_ODR_HIGH(GPIOB_PIN8) | \
PIN_ODR_HIGH(GPIOB_PIN9) | \
PIN_ODR_HIGH(GPIOB_PIN10) | \
PIN_ODR_HIGH(GPIOB_PIN11) | \
PIN_ODR_HIGH(GPIOB_PIN12) | \
PIN_ODR_HIGH(GPIOB_SPI2_SCK) | \
PIN_ODR_HIGH(GPIOB_SPI2_MISO) | \
PIN_ODR_HIGH(GPIOB_SPI2_MOSI))
#define VAL_GPIOB_AFRL (PIN_AFIO_AF(GPIOB_PIN0, 0U) | \
PIN_AFIO_AF(GPIOB_PIN1, 0U) | \
PIN_AFIO_AF(GPIOB_PIN2, 0U) | \
PIN_AFIO_AF(GPIOB_PIN3, 0U) | \
PIN_AFIO_AF(GPIOB_PIN4, 0U) | \
PIN_AFIO_AF(GPIOB_PIN5, 0U) | \
PIN_AFIO_AF(GPIOB_PIN6, 0U) | \
PIN_AFIO_AF(GPIOB_PIN7, 0U))
#define VAL_GPIOB_AFRH (PIN_AFIO_AF(GPIOB_PIN8, 0U) | \
PIN_AFIO_AF(GPIOB_PIN9, 0U) | \
PIN_AFIO_AF(GPIOB_PIN10, 0U) | \
PIN_AFIO_AF(GPIOB_PIN11, 0U) | \
PIN_AFIO_AF(GPIOB_PIN12, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_SCK, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_MISO, 0U) | \
PIN_AFIO_AF(GPIOB_SPI2_MOSI, 0U))
/*
* GPIOC setup:
*
* PC0 - MEMS_CS (output pushpull maximum).
* PC1 - PIN1 (input pullup).
* PC2 - PIN2 (input pullup).
* PC3 - PIN3 (input pullup).
* PC4 - PIN4 (input pullup).
* PC5 - PIN5 (input pullup).
* PC6 - LED_RED (output pushpull maximum).
* PC7 - LED_BLUE (output pushpull maximum).
* PC8 - LED_ORANGE (output pushpull maximum).
* PC9 - LED_GREEN (output pushpull maximum).
* PC10 - PIN10 (input pullup).
* PC11 - PIN11 (input pullup).
* PC12 - PIN12 (input pullup).
* PC13 - PIN13 (input pullup).
* PC14 - OSC32_IN (input floating).
* PC15 - OSC32_OUT (input floating).
*/
#define VAL_GPIOC_MODER (PIN_MODE_OUTPUT(GPIOC_MEMS_CS) | \
PIN_MODE_INPUT(GPIOC_PIN1) | \
PIN_MODE_INPUT(GPIOC_PIN2) | \
PIN_MODE_INPUT(GPIOC_PIN3) | \
PIN_MODE_INPUT(GPIOC_PIN4) | \
PIN_MODE_INPUT(GPIOC_PIN5) | \
PIN_MODE_OUTPUT(GPIOC_LED_RED) | \
PIN_MODE_OUTPUT(GPIOC_LED_BLUE) | \
PIN_MODE_OUTPUT(GPIOC_LED_ORANGE) | \
PIN_MODE_OUTPUT(GPIOC_LED_GREEN) | \
PIN_MODE_INPUT(GPIOC_PIN10) | \
PIN_MODE_INPUT(GPIOC_PIN11) | \
PIN_MODE_INPUT(GPIOC_PIN12) | \
PIN_MODE_INPUT(GPIOC_PIN13) | \
PIN_MODE_INPUT(GPIOC_OSC32_IN) | \
PIN_MODE_INPUT(GPIOC_OSC32_OUT))
#define VAL_GPIOC_OTYPER (PIN_OTYPE_PUSHPULL(GPIOC_MEMS_CS) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_RED) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_BLUE) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_ORANGE) | \
PIN_OTYPE_PUSHPULL(GPIOC_LED_GREEN) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOC_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_IN) | \
PIN_OTYPE_PUSHPULL(GPIOC_OSC32_OUT))
#define VAL_GPIOC_OSPEEDR (PIN_OSPEED_HIGH(GPIOC_MEMS_CS) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN5) | \
PIN_OSPEED_HIGH(GPIOC_LED_RED) | \
PIN_OSPEED_HIGH(GPIOC_LED_BLUE) | \
PIN_OSPEED_HIGH(GPIOC_LED_ORANGE) | \
PIN_OSPEED_HIGH(GPIOC_LED_GREEN) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOC_PIN13) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_IN) | \
PIN_OSPEED_HIGH(GPIOC_OSC32_OUT))
#define VAL_GPIOC_PUPDR (PIN_PUPDR_FLOATING(GPIOC_MEMS_CS) | \
PIN_PUPDR_PULLUP(GPIOC_PIN1) | \
PIN_PUPDR_PULLUP(GPIOC_PIN2) | \
PIN_PUPDR_PULLUP(GPIOC_PIN3) | \
PIN_PUPDR_PULLUP(GPIOC_PIN4) | \
PIN_PUPDR_PULLUP(GPIOC_PIN5) | \
PIN_PUPDR_FLOATING(GPIOC_LED_RED) | \
PIN_PUPDR_FLOATING(GPIOC_LED_BLUE) | \
PIN_PUPDR_FLOATING(GPIOC_LED_ORANGE) | \
PIN_PUPDR_FLOATING(GPIOC_LED_GREEN) | \
PIN_PUPDR_PULLUP(GPIOC_PIN10) | \
PIN_PUPDR_PULLUP(GPIOC_PIN11) | \
PIN_PUPDR_PULLUP(GPIOC_PIN12) | \
PIN_PUPDR_PULLUP(GPIOC_PIN13) | \
PIN_PUPDR_FLOATING(GPIOC_OSC32_IN) | \
PIN_PUPDR_FLOATING(GPIOC_OSC32_OUT))
#define VAL_GPIOC_ODR (PIN_ODR_HIGH(GPIOC_MEMS_CS) | \
PIN_ODR_HIGH(GPIOC_PIN1) | \
PIN_ODR_HIGH(GPIOC_PIN2) | \
PIN_ODR_HIGH(GPIOC_PIN3) | \
PIN_ODR_HIGH(GPIOC_PIN4) | \
PIN_ODR_HIGH(GPIOC_PIN5) | \
PIN_ODR_LOW(GPIOC_LED_RED) | \
PIN_ODR_LOW(GPIOC_LED_BLUE) | \
PIN_ODR_LOW(GPIOC_LED_ORANGE) | \
PIN_ODR_LOW(GPIOC_LED_GREEN) | \
PIN_ODR_HIGH(GPIOC_PIN10) | \
PIN_ODR_HIGH(GPIOC_PIN11) | \
PIN_ODR_HIGH(GPIOC_PIN12) | \
PIN_ODR_HIGH(GPIOC_PIN13) | \
PIN_ODR_HIGH(GPIOC_OSC32_IN) | \
PIN_ODR_HIGH(GPIOC_OSC32_OUT))
#define VAL_GPIOC_AFRL (PIN_AFIO_AF(GPIOC_MEMS_CS, 0U) | \
PIN_AFIO_AF(GPIOC_PIN1, 0U) | \
PIN_AFIO_AF(GPIOC_PIN2, 0U) | \
PIN_AFIO_AF(GPIOC_PIN3, 0U) | \
PIN_AFIO_AF(GPIOC_PIN4, 0U) | \
PIN_AFIO_AF(GPIOC_PIN5, 0U) | \
PIN_AFIO_AF(GPIOC_LED_RED, 0U) | \
PIN_AFIO_AF(GPIOC_LED_BLUE, 0U))
#define VAL_GPIOC_AFRH (PIN_AFIO_AF(GPIOC_LED_ORANGE, 0U) | \
PIN_AFIO_AF(GPIOC_LED_GREEN, 0U) | \
PIN_AFIO_AF(GPIOC_PIN10, 0U) | \
PIN_AFIO_AF(GPIOC_PIN11, 0U) | \
PIN_AFIO_AF(GPIOC_PIN12, 0U) | \
PIN_AFIO_AF(GPIOC_PIN13, 0U) | \
PIN_AFIO_AF(GPIOC_OSC32_IN, 0U) | \
PIN_AFIO_AF(GPIOC_OSC32_OUT, 0U))
/*
* GPIOD setup:
*
* PD0 - PIN0 (input pullup).
* PD1 - PIN1 (input pullup).
* PD2 - PIN2 (input pullup).
* PD3 - PIN3 (input pullup).
* PD4 - PIN4 (input pullup).
* PD5 - PIN5 (input pullup).
* PD6 - PIN6 (input pullup).
* PD7 - PIN7 (input pullup).
* PD8 - PIN8 (input pullup).
* PD9 - PIN9 (input pullup).
* PD10 - PIN10 (input pullup).
* PD11 - PIN11 (input pullup).
* PD12 - PIN12 (input pullup).
* PD13 - PIN13 (input pullup).
* PD14 - PIN14 (input pullup).
* PD15 - PIN15 (input pullup).
*/
#define VAL_GPIOD_MODER (PIN_MODE_INPUT(GPIOD_PIN0) | \
PIN_MODE_INPUT(GPIOD_PIN1) | \
PIN_MODE_INPUT(GPIOD_PIN2) | \
PIN_MODE_INPUT(GPIOD_PIN3) | \
PIN_MODE_INPUT(GPIOD_PIN4) | \
PIN_MODE_INPUT(GPIOD_PIN5) | \
PIN_MODE_INPUT(GPIOD_PIN6) | \
PIN_MODE_INPUT(GPIOD_PIN7) | \
PIN_MODE_INPUT(GPIOD_PIN8) | \
PIN_MODE_INPUT(GPIOD_PIN9) | \
PIN_MODE_INPUT(GPIOD_PIN10) | \
PIN_MODE_INPUT(GPIOD_PIN11) | \
PIN_MODE_INPUT(GPIOD_PIN12) | \
PIN_MODE_INPUT(GPIOD_PIN13) | \
PIN_MODE_INPUT(GPIOD_PIN14) | \
PIN_MODE_INPUT(GPIOD_PIN15))
#define VAL_GPIOD_OTYPER (PIN_OTYPE_PUSHPULL(GPIOD_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOD_PIN15))
#define VAL_GPIOD_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOD_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOD_PIN15))
#define VAL_GPIOD_PUPDR (PIN_PUPDR_PULLUP(GPIOD_PIN0) | \
PIN_PUPDR_PULLUP(GPIOD_PIN1) | \
PIN_PUPDR_PULLUP(GPIOD_PIN2) | \
PIN_PUPDR_PULLUP(GPIOD_PIN3) | \
PIN_PUPDR_PULLUP(GPIOD_PIN4) | \
PIN_PUPDR_PULLUP(GPIOD_PIN5) | \
PIN_PUPDR_PULLUP(GPIOD_PIN6) | \
PIN_PUPDR_PULLUP(GPIOD_PIN7) | \
PIN_PUPDR_PULLUP(GPIOD_PIN8) | \
PIN_PUPDR_PULLUP(GPIOD_PIN9) | \
PIN_PUPDR_PULLUP(GPIOD_PIN10) | \
PIN_PUPDR_PULLUP(GPIOD_PIN11) | \
PIN_PUPDR_PULLUP(GPIOD_PIN12) | \
PIN_PUPDR_PULLUP(GPIOD_PIN13) | \
PIN_PUPDR_PULLUP(GPIOD_PIN14) | \
PIN_PUPDR_PULLUP(GPIOD_PIN15))
#define VAL_GPIOD_ODR (PIN_ODR_HIGH(GPIOD_PIN0) | \
PIN_ODR_HIGH(GPIOD_PIN1) | \
PIN_ODR_HIGH(GPIOD_PIN2) | \
PIN_ODR_HIGH(GPIOD_PIN3) | \
PIN_ODR_HIGH(GPIOD_PIN4) | \
PIN_ODR_HIGH(GPIOD_PIN5) | \
PIN_ODR_HIGH(GPIOD_PIN6) | \
PIN_ODR_HIGH(GPIOD_PIN7) | \
PIN_ODR_HIGH(GPIOD_PIN8) | \
PIN_ODR_HIGH(GPIOD_PIN9) | \
PIN_ODR_HIGH(GPIOD_PIN10) | \
PIN_ODR_HIGH(GPIOD_PIN11) | \
PIN_ODR_HIGH(GPIOD_PIN12) | \
PIN_ODR_HIGH(GPIOD_PIN13) | \
PIN_ODR_HIGH(GPIOD_PIN14) | \
PIN_ODR_HIGH(GPIOD_PIN15))
#define VAL_GPIOD_AFRL (PIN_AFIO_AF(GPIOD_PIN0, 0U) | \
PIN_AFIO_AF(GPIOD_PIN1, 0U) | \
PIN_AFIO_AF(GPIOD_PIN2, 0U) | \
PIN_AFIO_AF(GPIOD_PIN3, 0U) | \
PIN_AFIO_AF(GPIOD_PIN4, 0U) | \
PIN_AFIO_AF(GPIOD_PIN5, 0U) | \
PIN_AFIO_AF(GPIOD_PIN6, 0U) | \
PIN_AFIO_AF(GPIOD_PIN7, 0U))
#define VAL_GPIOD_AFRH (PIN_AFIO_AF(GPIOD_PIN8, 0U) | \
PIN_AFIO_AF(GPIOD_PIN9, 0U) | \
PIN_AFIO_AF(GPIOD_PIN10, 0U) | \
PIN_AFIO_AF(GPIOD_PIN11, 0U) | \
PIN_AFIO_AF(GPIOD_PIN12, 0U) | \
PIN_AFIO_AF(GPIOD_PIN13, 0U) | \
PIN_AFIO_AF(GPIOD_PIN14, 0U) | \
PIN_AFIO_AF(GPIOD_PIN15, 0U))
/*
* GPIOE setup:
*
* PE0 - PIN0 (input pullup).
* PE1 - PIN1 (input pullup).
* PE2 - PIN2 (input pullup).
* PE3 - PIN3 (input pullup).
* PE4 - PIN4 (input pullup).
* PE5 - PIN5 (input pullup).
* PE6 - PIN6 (input pullup).
* PE7 - PIN7 (input pullup).
* PE8 - PIN8 (input pullup).
* PE9 - PIN9 (input pullup).
* PE10 - PIN10 (input pullup).
* PE11 - PIN11 (input pullup).
* PE12 - PIN12 (input pullup).
* PE13 - PIN13 (input pullup).
* PE14 - PIN14 (input pullup).
* PE15 - PIN15 (input pullup).
*/
#define VAL_GPIOE_MODER (PIN_MODE_INPUT(GPIOE_PIN0) | \
PIN_MODE_INPUT(GPIOE_PIN1) | \
PIN_MODE_INPUT(GPIOE_PIN2) | \
PIN_MODE_INPUT(GPIOE_PIN3) | \
PIN_MODE_INPUT(GPIOE_PIN4) | \
PIN_MODE_INPUT(GPIOE_PIN5) | \
PIN_MODE_INPUT(GPIOE_PIN6) | \
PIN_MODE_INPUT(GPIOE_PIN7) | \
PIN_MODE_INPUT(GPIOE_PIN8) | \
PIN_MODE_INPUT(GPIOE_PIN9) | \
PIN_MODE_INPUT(GPIOE_PIN10) | \
PIN_MODE_INPUT(GPIOE_PIN11) | \
PIN_MODE_INPUT(GPIOE_PIN12) | \
PIN_MODE_INPUT(GPIOE_PIN13) | \
PIN_MODE_INPUT(GPIOE_PIN14) | \
PIN_MODE_INPUT(GPIOE_PIN15))
#define VAL_GPIOE_OTYPER (PIN_OTYPE_PUSHPULL(GPIOE_PIN0) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN1) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOE_PIN15))
#define VAL_GPIOE_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOE_PIN0) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN1) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOE_PIN15))
#define VAL_GPIOE_PUPDR (PIN_PUPDR_PULLUP(GPIOE_PIN0) | \
PIN_PUPDR_PULLUP(GPIOE_PIN1) | \
PIN_PUPDR_PULLUP(GPIOE_PIN2) | \
PIN_PUPDR_PULLUP(GPIOE_PIN3) | \
PIN_PUPDR_PULLUP(GPIOE_PIN4) | \
PIN_PUPDR_PULLUP(GPIOE_PIN5) | \
PIN_PUPDR_PULLUP(GPIOE_PIN6) | \
PIN_PUPDR_PULLUP(GPIOE_PIN7) | \
PIN_PUPDR_PULLUP(GPIOE_PIN8) | \
PIN_PUPDR_PULLUP(GPIOE_PIN9) | \
PIN_PUPDR_PULLUP(GPIOE_PIN10) | \
PIN_PUPDR_PULLUP(GPIOE_PIN11) | \
PIN_PUPDR_PULLUP(GPIOE_PIN12) | \
PIN_PUPDR_PULLUP(GPIOE_PIN13) | \
PIN_PUPDR_PULLUP(GPIOE_PIN14) | \
PIN_PUPDR_PULLUP(GPIOE_PIN15))
#define VAL_GPIOE_ODR (PIN_ODR_HIGH(GPIOE_PIN0) | \
PIN_ODR_HIGH(GPIOE_PIN1) | \
PIN_ODR_HIGH(GPIOE_PIN2) | \
PIN_ODR_HIGH(GPIOE_PIN3) | \
PIN_ODR_HIGH(GPIOE_PIN4) | \
PIN_ODR_HIGH(GPIOE_PIN5) | \
PIN_ODR_HIGH(GPIOE_PIN6) | \
PIN_ODR_HIGH(GPIOE_PIN7) | \
PIN_ODR_HIGH(GPIOE_PIN8) | \
PIN_ODR_HIGH(GPIOE_PIN9) | \
PIN_ODR_HIGH(GPIOE_PIN10) | \
PIN_ODR_HIGH(GPIOE_PIN11) | \
PIN_ODR_HIGH(GPIOE_PIN12) | \
PIN_ODR_HIGH(GPIOE_PIN13) | \
PIN_ODR_HIGH(GPIOE_PIN14) | \
PIN_ODR_HIGH(GPIOE_PIN15))
#define VAL_GPIOE_AFRL (PIN_AFIO_AF(GPIOE_PIN0, 0U) | \
PIN_AFIO_AF(GPIOE_PIN1, 0U) | \
PIN_AFIO_AF(GPIOE_PIN2, 0U) | \
PIN_AFIO_AF(GPIOE_PIN3, 0U) | \
PIN_AFIO_AF(GPIOE_PIN4, 0U) | \
PIN_AFIO_AF(GPIOE_PIN5, 0U) | \
PIN_AFIO_AF(GPIOE_PIN6, 0U) | \
PIN_AFIO_AF(GPIOE_PIN7, 0U))
#define VAL_GPIOE_AFRH (PIN_AFIO_AF(GPIOE_PIN8, 0U) | \
PIN_AFIO_AF(GPIOE_PIN9, 0U) | \
PIN_AFIO_AF(GPIOE_PIN10, 0U) | \
PIN_AFIO_AF(GPIOE_PIN11, 0U) | \
PIN_AFIO_AF(GPIOE_PIN12, 0U) | \
PIN_AFIO_AF(GPIOE_PIN13, 0U) | \
PIN_AFIO_AF(GPIOE_PIN14, 0U) | \
PIN_AFIO_AF(GPIOE_PIN15, 0U))
/*
* GPIOF setup:
*
* PF0 - OSC_IN (input floating).
* PF1 - OSC_OUT (input floating).
* PF2 - PIN2 (input pullup).
* PF3 - PIN3 (input pullup).
* PF4 - PIN4 (input pullup).
* PF5 - PIN5 (input pullup).
* PF6 - PIN6 (input pullup).
* PF7 - PIN7 (input pullup).
* PF8 - PIN8 (input pullup).
* PF9 - PIN9 (input pullup).
* PF10 - PIN10 (input pullup).
* PF11 - PIN11 (input pullup).
* PF12 - PIN12 (input pullup).
* PF13 - PIN13 (input pullup).
* PF14 - PIN14 (input pullup).
* PF15 - PIN15 (input pullup).
*/
#define VAL_GPIOF_MODER (PIN_MODE_INPUT(GPIOF_OSC_IN) | \
PIN_MODE_INPUT(GPIOF_OSC_OUT) | \
PIN_MODE_INPUT(GPIOF_PIN2) | \
PIN_MODE_INPUT(GPIOF_PIN3) | \
PIN_MODE_INPUT(GPIOF_PIN4) | \
PIN_MODE_INPUT(GPIOF_PIN5) | \
PIN_MODE_INPUT(GPIOF_PIN6) | \
PIN_MODE_INPUT(GPIOF_PIN7) | \
PIN_MODE_INPUT(GPIOF_PIN8) | \
PIN_MODE_INPUT(GPIOF_PIN9) | \
PIN_MODE_INPUT(GPIOF_PIN10) | \
PIN_MODE_INPUT(GPIOF_PIN11) | \
PIN_MODE_INPUT(GPIOF_PIN12) | \
PIN_MODE_INPUT(GPIOF_PIN13) | \
PIN_MODE_INPUT(GPIOF_PIN14) | \
PIN_MODE_INPUT(GPIOF_PIN15))
#define VAL_GPIOF_OTYPER (PIN_OTYPE_PUSHPULL(GPIOF_OSC_IN) | \
PIN_OTYPE_PUSHPULL(GPIOF_OSC_OUT) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN2) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN3) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN4) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN5) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN6) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN7) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN8) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN9) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN10) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN11) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN12) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN13) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN14) | \
PIN_OTYPE_PUSHPULL(GPIOF_PIN15))
#define VAL_GPIOF_OSPEEDR (PIN_OSPEED_VERYLOW(GPIOF_OSC_IN) | \
PIN_OSPEED_VERYLOW(GPIOF_OSC_OUT) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN2) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN3) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN4) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN5) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN6) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN7) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN8) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN9) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN10) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN11) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN12) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN13) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN14) | \
PIN_OSPEED_VERYLOW(GPIOF_PIN15))
#define VAL_GPIOF_PUPDR (PIN_PUPDR_FLOATING(GPIOF_OSC_IN) | \
PIN_PUPDR_FLOATING(GPIOF_OSC_OUT) | \
PIN_PUPDR_PULLUP(GPIOF_PIN2) | \
PIN_PUPDR_PULLUP(GPIOF_PIN3) | \
PIN_PUPDR_PULLUP(GPIOF_PIN4) | \
PIN_PUPDR_PULLUP(GPIOF_PIN5) | \
PIN_PUPDR_PULLUP(GPIOF_PIN6) | \
PIN_PUPDR_PULLUP(GPIOF_PIN7) | \
PIN_PUPDR_PULLUP(GPIOF_PIN8) | \
PIN_PUPDR_PULLUP(GPIOF_PIN9) | \
PIN_PUPDR_PULLUP(GPIOF_PIN10) | \
PIN_PUPDR_PULLUP(GPIOF_PIN11) | \
PIN_PUPDR_PULLUP(GPIOF_PIN12) | \
PIN_PUPDR_PULLUP(GPIOF_PIN13) | \
PIN_PUPDR_PULLUP(GPIOF_PIN14) | \
PIN_PUPDR_PULLUP(GPIOF_PIN15))
#define VAL_GPIOF_ODR (PIN_ODR_HIGH(GPIOF_OSC_IN) | \
PIN_ODR_HIGH(GPIOF_OSC_OUT) | \
PIN_ODR_HIGH(GPIOF_PIN2) | \
PIN_ODR_HIGH(GPIOF_PIN3) | \
PIN_ODR_HIGH(GPIOF_PIN4) | \
PIN_ODR_HIGH(GPIOF_PIN5) | \
PIN_ODR_HIGH(GPIOF_PIN6) | \
PIN_ODR_HIGH(GPIOF_PIN7) | \
PIN_ODR_HIGH(GPIOF_PIN8) | \
PIN_ODR_HIGH(GPIOF_PIN9) | \
PIN_ODR_HIGH(GPIOF_PIN10) | \
PIN_ODR_HIGH(GPIOF_PIN11) | \
PIN_ODR_HIGH(GPIOF_PIN12) | \
PIN_ODR_HIGH(GPIOF_PIN13) | \
PIN_ODR_HIGH(GPIOF_PIN14) | \
PIN_ODR_HIGH(GPIOF_PIN15))
#define VAL_GPIOF_AFRL (PIN_AFIO_AF(GPIOF_OSC_IN, 0U) | \
PIN_AFIO_AF(GPIOF_OSC_OUT, 0U) | \
PIN_AFIO_AF(GPIOF_PIN2, 0U) | \
PIN_AFIO_AF(GPIOF_PIN3, 0U) | \
PIN_AFIO_AF(GPIOF_PIN4, 0U) | \
PIN_AFIO_AF(GPIOF_PIN5, 0U) | \
PIN_AFIO_AF(GPIOF_PIN6, 0U) | \
PIN_AFIO_AF(GPIOF_PIN7, 0U))
#define VAL_GPIOF_AFRH (PIN_AFIO_AF(GPIOF_PIN8, 0U) | \
PIN_AFIO_AF(GPIOF_PIN9, 0U) | \
PIN_AFIO_AF(GPIOF_PIN10, 0U) | \
PIN_AFIO_AF(GPIOF_PIN11, 0U) | \
PIN_AFIO_AF(GPIOF_PIN12, 0U) | \
PIN_AFIO_AF(GPIOF_PIN13, 0U) | \
PIN_AFIO_AF(GPIOF_PIN14, 0U) | \
PIN_AFIO_AF(GPIOF_PIN15, 0U))
/*===========================================================================*/
/* External declarations. */
/*===========================================================================*/
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */
#endif /* BOARD_H */

View File

@ -1,5 +0,0 @@
# List of all the board related files.
BOARDSRC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY/board.c
# Required include directories
BOARDINC = $(BOARD_PATH)/boards/ST_STM32F072B_DISCOVERY

View File

@ -1,703 +0,0 @@
<?xml version="1.0" encoding="UTF-8"?>
<!-- STM32F0xx board Template -->
<board
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xsi:noNamespaceSchemaLocation="http://www.chibios.org/xml/schema/boards/stm32f0xx_board.xsd">
<configuration_settings>
<templates_path>resources/gencfg/processors/boards/stm32f0xx/templates</templates_path>
<output_path>..</output_path>
<hal_version>3.0.x</hal_version>
</configuration_settings>
<board_name>ST STM32F072B-Discovery</board_name>
<board_id>ST_STM32F072B_DISCOVERY</board_id>
<board_functions></board_functions>
<subtype>STM32F072xB</subtype>
<clocks HSEFrequency="0" HSEBypass="true" LSEFrequency="0"
LSEBypass="false" LSEDrive="3 High Drive (default)" />
<ports>
<GPIOA>
<pin0
ID="BUTTON"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID="USB_DM"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID="USB_DP"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID="SWDIO"
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin14
ID="SWCLK"
Type="PushPull"
Speed="Maximum"
Resistor="PullDown"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOA>
<GPIOB>
<pin0
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Maximum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID="SPI2_SCK"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin14
ID="SPI2_MISO"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
<pin15
ID="SPI2_MOSI"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Alternate"
Alternate="0" />
</GPIOB>
<GPIOC>
<pin0
ID="MEMS_CS"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Output"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID="LED_RED"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin7
ID="LED_BLUE"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin8
ID="LED_ORANGE"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" ></pin8>
<pin9
ID="LED_GREEN"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="Low"
Mode="Output"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID="OSC32_IN"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID="OSC32_OUT"
Type="PushPull"
Speed="Maximum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOC>
<GPIOD>
<pin0
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOD>
<GPIOE>
<pin0 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin1 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin2 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin3 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin4 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin5 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin6 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin7 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin8 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin9 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin10 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin11 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin12 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin13 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin14 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
<pin15 ID="" Type="PushPull" Speed="Minimum" Resistor="PullUp"
Level="High" Mode="Input" Alternate="0" />
</GPIOE>
<GPIOF>
<pin0
ID="OSC_IN"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin1
ID="OSC_OUT"
Type="PushPull"
Speed="Minimum"
Resistor="Floating"
Level="High"
Mode="Input"
Alternate="0" />
<pin2
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin3
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin4
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin5
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin6
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin7
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin8
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin9
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin10
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin11
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin12
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin13
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin14
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
<pin15
ID=""
Type="PushPull"
Speed="Minimum"
Resistor="PullUp"
Level="High"
Mode="Input"
Alternate="0" />
</GPIOF>
</ports>
</board>

View File

@ -1,7 +0,0 @@
/* Address for jumping to bootloader on STM32 chips. */
/* It is chip dependent, the correct number can be looked up here (page 175):
* http://www.st.com/web/en/resource/technical/document/application_note/CD00167594.pdf
* This also requires a patch to chibios:
* <tmk_dir>/tmk_core/tool/chibios/ch-bootloader-jump.patch
*/
#define STM32_BOOTLOADER_ADDRESS 0x1FFFC800

View File

@ -33,6 +33,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define MATRIX_ROW_PINS { B1, B0, A7, A5, A4 }
#define DIODE_DIRECTION COL2ROW
#define BACKLIGHT_PIN A6
#define BACKLIGHT_PWM_DRIVER PWMD3
#define BACKLIGHT_PWM_CHANNEL 1
#define BACKLIGHT_PAL_MODE 1
#define BACKLIGHT_LEVELS 6
#define BACKLIGHT_BREATHING
#define BREATHING_PERIOD 6
@ -52,16 +56,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGB_DI_PIN B15
#define RGBLED_NUM 14
#define WS2812_SPI SPID2
#define WS2812_SPI_MOSI_PAL_MODE 0
// Backlight config starts after VIA's EEPROM usage,
// dynamic keymaps start after this.
#define VIA_EEPROM_CUSTOM_CONFIG_SIZE 1
// VIA lighting is handled by the keyboard-level code
#define VIA_CUSTOM_LIGHTING_ENABLE
// Let VIA handle the QMK RGBLIGHT
#define VIA_QMK_RGBLIGHT_ENABLE
// 2 bits for 4 layout options
#define VIA_EEPROM_LAYOUT_OPTIONS_SIZE 2

View File

@ -52,5 +52,5 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
)
};

View File

@ -1,17 +1,11 @@
# MCU name
MCU = STM32F072
BOARD = ST_STM32F072B_DISCOVERY
# Build Options
# comment out to disable the options.
#
# project specific files
VPATH += keyboards/cannonkeys/stm32f072
SRC = keyboard.c \
led.c
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = yes # Console for debug
@ -19,13 +13,10 @@ COMMAND_ENABLE = yes # Commands for debug and configuration
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
CUSTOM_MATRIX = no # Custom matrix file
# BACKLIGHT_ENABLE = yes # This is broken on 072 for some reason
BACKLIGHT_ENABLE = yes
RGBLIGHT_ENABLE = yes
WS2812_DRIVER = spi
# RAW_ENABLE = yes
# DYNAMIC_KEYMAP_ENABLE = yes
# Enter lower-power sleep mode when on the ChibiOS idle thread
OPT_DEFS += -DCORTEX_ENABLE_WFI_IDLE=TRUE