qmk-dactyl-manuform-a/keyboards/thevankeyboards/roadkit/keymaps/mjt/keymap.c

231 lines
6.4 KiB
C
Raw Normal View History

#include QMK_KEYBOARD_H
Keymaps for several of my boards (#1641) * copied mjt keymaps from archive * All mjt boards now compile * fixed jd45-mjt breathing * Updates to fix SpaceFN but not tested yet. * Still missing either spacebar or an adjacent keypress. * Debugging rigged up for use with hid_listen. * Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c * Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function. * Cleaned up JD45 keymap that uses tapkey. * Redid minivan keymap with numsym rather than raise/lower. Untested. * Created my MJT keymap for HHKB Enabled dynamic macros and moved somoe of the shortcuts around. * Minor keymap fixes to make them compile without errors. * Added home/end to right arrow cluster on DYN layer. * Added more keys to fn and dyn layers. * It wasn't using my custom layer last time somehow...? Now it will. * Compiled and installed at end of day on 8/23 * Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback. * Fixed volume controls... were reversed and disabled. * Added F13-F15 back to fkeys layer in Minivan * Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan. * Removed DYN layer. * Fixed diagram in planck numsym. * Cleanup for pull request. * Roadkit flip phone warning. * Replaced PLAY_NOTES_ARRAY to PLAY_SONG * reset the submodules * checked out specific commits for submodules * Removed debugging from JD45 shared config.h * Moved custom rules.mk to apropriate keymap Reset the shared rules.mk file. * Trailing return issue in rules.mk Gotta make for a smooth pull request :-)
2017-08-27 05:33:33 +02:00
extern keymap_config_t keymap_config;
#ifdef BACKLIGHT_ENABLE
#include "backlight.h"
#endif
#ifdef AUDIO_ENABLE
#include "audio.h"
#endif
void backlight_toggle(void){
};
enum roadkit_layers {
_NUMPAD,
_NAVIGATION,
_EXCEL,
_ADJUST,
_DYN
};
enum minivan_keycodes {
NUMPAD = SAFE_RANGE,
NAVIGATION,
EXCEL,
NUMPAD_LOCK,
NAVIGATION_LOCK,
EXCEL_LOCK,
PARENS,
BRACKETS,
BRACES,
BACKLIT,
MACSLEEP,
DYNAMIC_MACRO_RANGE,
};
#include "dynamic_macro.h"
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_NUMPAD] = LAYOUT_numpad_4x4( /* Numpad */
KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \
KC_KP_4, KC_KP_5, KC_KP_6, \
KC_KP_1, KC_KP_2, KC_KP_3, NAVIGATION, \
EXCEL, KC_KP_DOT
),
[_EXCEL] = LAYOUT_numpad_4x4( /* Excel related */
KC_KP_SLASH, KC_KP_ASTERISK, KC_MINS, KC_TAB, \
KC_QUOT, KC_KP_EQUAL, PARENS, \
KC_DQT, BRACKETS, BRACES, _______, \
_______, MO(_DYN)
),
[_NAVIGATION] = LAYOUT_numpad_4x4( /* Navigation */
KC_HOME, _______, KC_PGUP, KC_TAB, \
KC_END, KC_UP, KC_PGDN, \
KC_LEFT, KC_DOWN, KC_RIGHT, _______, \
_______, MO(_DYN)
),
[_ADJUST] = LAYOUT_numpad_4x4( /* Adjustments */
KC_NUMLOCK, MACSLEEP, BACKLIT, _______, \
KC_BSPC, _______, KC_DEL, \
EXCEL_LOCK, NUMPAD_LOCK, NAVIGATION_LOCK, _______, \
_______, _______
),
[_DYN] = LAYOUT_numpad_4x4( /* DYNAMIC MACRO */
DYN_REC_START1, DYN_REC_START2, _______, _______, \
_______, _______, _______, \
DYN_MACRO_PLAY1, DYN_MACRO_PLAY2, _______, _______, \
_______, _______
),
Keymaps for several of my boards (#1641) * copied mjt keymaps from archive * All mjt boards now compile * fixed jd45-mjt breathing * Updates to fix SpaceFN but not tested yet. * Still missing either spacebar or an adjacent keypress. * Debugging rigged up for use with hid_listen. * Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c * Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function. * Cleaned up JD45 keymap that uses tapkey. * Redid minivan keymap with numsym rather than raise/lower. Untested. * Created my MJT keymap for HHKB Enabled dynamic macros and moved somoe of the shortcuts around. * Minor keymap fixes to make them compile without errors. * Added home/end to right arrow cluster on DYN layer. * Added more keys to fn and dyn layers. * It wasn't using my custom layer last time somehow...? Now it will. * Compiled and installed at end of day on 8/23 * Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback. * Fixed volume controls... were reversed and disabled. * Added F13-F15 back to fkeys layer in Minivan * Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan. * Removed DYN layer. * Fixed diagram in planck numsym. * Cleanup for pull request. * Roadkit flip phone warning. * Replaced PLAY_NOTES_ARRAY to PLAY_SONG * reset the submodules * checked out specific commits for submodules * Removed debugging from JD45 shared config.h * Moved custom rules.mk to apropriate keymap Reset the shared rules.mk file. * Trailing return issue in rules.mk Gotta make for a smooth pull request :-)
2017-08-27 05:33:33 +02:00
};
#ifdef AUDIO_ENABLE
float tone_startup[][2] = SONG(STARTUP_SOUND);
float tone_numpad[][2] = SONG(QWERTY_SOUND);
float tone_excel[][2] = SONG(DVORAK_SOUND);
float tone_navigation[][2] = SONG(COLEMAK_SOUND);
float tone_plover[][2] = SONG(PLOVER_SOUND);
float tone_plover_gb[][2] = SONG(PLOVER_GOODBYE_SOUND);
float music_scale[][2] = SONG(MUSIC_SCALE_SOUND);
float tone_goodbye[][2] = SONG(GOODBYE_SOUND);
#endif
void persistant_default_layer_set(uint16_t default_layer) {
eeconfig_update_default_layer(default_layer);
default_layer_set(default_layer);
}
bool fn_tap_used = false; // sets to false when space is pressed,
// sets to true when any other key is pressed,
//when space is lifted, if another key was prssed, don't send space.
uint16_t fn_keycode = 0; // stores which spacebar was used, either raise or lower...
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
if (!process_record_dynamic_macro(keycode, record)) {
return false;
}
switch (keycode) {
case NAVIGATION: // This key is enter if tapped, navigation if held
if (record->event.pressed) {
fn_keycode = NAVIGATION; // these two lines figure out if the next action is
fn_tap_used = false;
layer_on(_NAVIGATION);
update_tri_layer(_EXCEL, _NAVIGATION, _ADJUST);
} else {
layer_off(_NAVIGATION);
update_tri_layer(_EXCEL, _NAVIGATION, _ADJUST);
if(!fn_tap_used && fn_keycode == NAVIGATION ){
register_code(KC_KP_ENTER);
unregister_code(KC_KP_ENTER);
fn_keycode = 0;
fn_tap_used = false;
}
}
return false;
break;
case EXCEL:
if (record->event.pressed) {
fn_keycode = EXCEL;
fn_tap_used = false;
layer_on(_EXCEL);
update_tri_layer(_EXCEL, _NAVIGATION, _ADJUST);
} else {
layer_off(_EXCEL);
update_tri_layer(_EXCEL, _NAVIGATION, _ADJUST);
if(!fn_tap_used && fn_keycode == EXCEL ){
register_code(KC_KP_0);
unregister_code(KC_KP_0);
fn_keycode = 0;
fn_tap_used = false;
}
}
return false;
break;
default:
fn_tap_used = true;
break; // don't return because this just handles the spacebars.
}
// this is the normal keycode processing switch from Planck default layout.
switch (keycode) {
case NUMPAD_LOCK:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
2020-05-30 22:14:59 +02:00
PLAY_SONG(tone_numpad);
Keymaps for several of my boards (#1641) * copied mjt keymaps from archive * All mjt boards now compile * fixed jd45-mjt breathing * Updates to fix SpaceFN but not tested yet. * Still missing either spacebar or an adjacent keypress. * Debugging rigged up for use with hid_listen. * Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c * Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function. * Cleaned up JD45 keymap that uses tapkey. * Redid minivan keymap with numsym rather than raise/lower. Untested. * Created my MJT keymap for HHKB Enabled dynamic macros and moved somoe of the shortcuts around. * Minor keymap fixes to make them compile without errors. * Added home/end to right arrow cluster on DYN layer. * Added more keys to fn and dyn layers. * It wasn't using my custom layer last time somehow...? Now it will. * Compiled and installed at end of day on 8/23 * Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback. * Fixed volume controls... were reversed and disabled. * Added F13-F15 back to fkeys layer in Minivan * Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan. * Removed DYN layer. * Fixed diagram in planck numsym. * Cleanup for pull request. * Roadkit flip phone warning. * Replaced PLAY_NOTES_ARRAY to PLAY_SONG * reset the submodules * checked out specific commits for submodules * Removed debugging from JD45 shared config.h * Moved custom rules.mk to apropriate keymap Reset the shared rules.mk file. * Trailing return issue in rules.mk Gotta make for a smooth pull request :-)
2017-08-27 05:33:33 +02:00
#endif
persistant_default_layer_set(1UL<<_NUMPAD);
}
return false;
break;
case NAVIGATION_LOCK:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
2020-05-30 22:14:59 +02:00
PLAY_SONG(tone_navigation);
Keymaps for several of my boards (#1641) * copied mjt keymaps from archive * All mjt boards now compile * fixed jd45-mjt breathing * Updates to fix SpaceFN but not tested yet. * Still missing either spacebar or an adjacent keypress. * Debugging rigged up for use with hid_listen. * Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c * Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function. * Cleaned up JD45 keymap that uses tapkey. * Redid minivan keymap with numsym rather than raise/lower. Untested. * Created my MJT keymap for HHKB Enabled dynamic macros and moved somoe of the shortcuts around. * Minor keymap fixes to make them compile without errors. * Added home/end to right arrow cluster on DYN layer. * Added more keys to fn and dyn layers. * It wasn't using my custom layer last time somehow...? Now it will. * Compiled and installed at end of day on 8/23 * Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback. * Fixed volume controls... were reversed and disabled. * Added F13-F15 back to fkeys layer in Minivan * Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan. * Removed DYN layer. * Fixed diagram in planck numsym. * Cleanup for pull request. * Roadkit flip phone warning. * Replaced PLAY_NOTES_ARRAY to PLAY_SONG * reset the submodules * checked out specific commits for submodules * Removed debugging from JD45 shared config.h * Moved custom rules.mk to apropriate keymap Reset the shared rules.mk file. * Trailing return issue in rules.mk Gotta make for a smooth pull request :-)
2017-08-27 05:33:33 +02:00
#endif
persistant_default_layer_set(1UL<<_NAVIGATION);
}
return false;
break;
case EXCEL_LOCK:
if (record->event.pressed) {
#ifdef AUDIO_ENABLE
2020-05-30 22:14:59 +02:00
PLAY_SONG(tone_excel);
Keymaps for several of my boards (#1641) * copied mjt keymaps from archive * All mjt boards now compile * fixed jd45-mjt breathing * Updates to fix SpaceFN but not tested yet. * Still missing either spacebar or an adjacent keypress. * Debugging rigged up for use with hid_listen. * Reverted the default keymap to use tap_layer_key rather than custom. Moved custom approach to keymap_debug.c * Fixed the lower-left side of the keymap, which needed more spacers due to the matrix being directly put into the array rather than using the keymap function. * Cleaned up JD45 keymap that uses tapkey. * Redid minivan keymap with numsym rather than raise/lower. Untested. * Created my MJT keymap for HHKB Enabled dynamic macros and moved somoe of the shortcuts around. * Minor keymap fixes to make them compile without errors. * Added home/end to right arrow cluster on DYN layer. * Added more keys to fn and dyn layers. * It wasn't using my custom layer last time somehow...? Now it will. * Compiled and installed at end of day on 8/23 * Moved macros to FKEY layer because Adjust was too hard to get into and out of without some sort of feedback. * Fixed volume controls... were reversed and disabled. * Added F13-F15 back to fkeys layer in Minivan * Created new Planck Keymap that uses the NumSym and FKeys layer approach like the Minivan. * Removed DYN layer. * Fixed diagram in planck numsym. * Cleanup for pull request. * Roadkit flip phone warning. * Replaced PLAY_NOTES_ARRAY to PLAY_SONG * reset the submodules * checked out specific commits for submodules * Removed debugging from JD45 shared config.h * Moved custom rules.mk to apropriate keymap Reset the shared rules.mk file. * Trailing return issue in rules.mk Gotta make for a smooth pull request :-)
2017-08-27 05:33:33 +02:00
#endif
persistant_default_layer_set(1UL<<_EXCEL);
}
return false;
break;
case PARENS:
if (record->event.pressed) {
register_code(KC_RSFT);
register_code(KC_9);
unregister_code(KC_9);
register_code(KC_0);
unregister_code(KC_0);
register_code(KC_RSFT);
register_code(KC_LEFT);
unregister_code(KC_LEFT);
}
return false;
break;
case BRACKETS:
if (record->event.pressed) {
register_code(KC_LBRC);
unregister_code(KC_LBRC);
register_code(KC_RBRC);
unregister_code(KC_RBRC);
register_code(KC_LEFT);
unregister_code(KC_LEFT);
}
return false;
break;
case BRACES:
if (record->event.pressed) {
register_code(KC_RSFT);
register_code(KC_LBRC);
unregister_code(KC_LBRC);
register_code(KC_RBRC);
unregister_code(KC_RBRC);
unregister_code(KC_RSFT);
register_code(KC_LEFT);
unregister_code(KC_LEFT);
}
return false;
break;
case BACKLIT:
if (record->event.pressed) {
#ifdef BACKLIGHT_ENABLE
backlight_step();
#endif
}
return false;
break;
case MACSLEEP:
if (record->event.pressed) {
register_code(KC_RSFT);
register_code(KC_RCTL);
register_code(KC_POWER);
unregister_code(KC_POWER);
unregister_code(KC_RCTL);
unregister_code(KC_RSFT);
}
return false;
break;
}
return true;
}