qmk-dactyl-manuform-a/converter/sun_usb/Makefile

86 lines
2.4 KiB
Makefile
Raw Normal View History

2012-10-18 03:41:37 +02:00
# Target file name (without extension).
TARGET = sun_usb
# Directory common source filess exist
TOP_DIR = ../..
# Directory keyboard dependent files exist
TARGET_DIR = .
# keyboard dependent files
SRC = keymap.c \
matrix.c \
led.c \
command_extra.c \
2012-10-19 07:06:18 +02:00
protocol/serial_soft.c
2012-10-18 03:41:37 +02:00
CONFIG_H = config.h
# MCU name, you MUST set this to match the board you are using
# type "make clean" after changing this, so all files will be rebuilt
#MCU = at90usb162 # Teensy 1.0
2014-04-25 08:25:21 +02:00
#MCU = atmega32u4 # Teensy 2.0
2012-10-18 03:41:37 +02:00
#MCU = at90usb646 # Teensy++ 1.0
#MCU = at90usb1286 # Teensy++ 2.0
2014-04-25 08:25:21 +02:00
MCU = atmega32u2
2012-10-18 03:41:37 +02:00
# Processor frequency.
# Normally the first thing your program should do is set the clock prescaler,
# so your program will run at the correct speed. You should also set this
# variable to same clock speed. The _delay_ms() macro uses this, and many
# examples use this variable to calculate timings. Do not add a "UL" here.
F_CPU = 16000000
2012-10-19 07:06:18 +02:00
#
# LUFA specific
#
# Target architecture (see library "Board Types" documentation).
ARCH = AVR8
# Input clock frequency.
# This will define a symbol, F_USB, in all source code files equal to the
# input clock frequency (before any prescaling is performed) in Hz. This value may
# differ from F_CPU if prescaling is used on the latter, and is required as the
# raw input clock is fed directly to the PLL sections of the AVR for high speed
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
# at the end, this will be done automatically to create a 32-bit value in your
# source code.
#
# If no clock division is performed on the input clock inside the AVR (via the
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
F_USB = $(F_CPU)
# Interrupt driven control endpoint task
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
2012-10-18 03:41:37 +02:00
# Build Options
# *Comment out* to disable the options.
#
MOUSEKEY_ENABLE = yes # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
2012-10-19 07:06:18 +02:00
CONSOLE_ENABLE = yes # Console for debug
COMMAND_ENABLE = yes # Commands for debug and configuration
2012-10-19 07:06:18 +02:00
#NKRO_ENABLE = yes # USB Nkey Rollover
2012-10-18 03:41:37 +02:00
2012-10-19 07:06:18 +02:00
# Boot Section Size in bytes
# Teensy halfKay 512
# Atmel DFU loader 4096
# LUFA bootloader 4096
2013-03-29 03:31:21 +01:00
OPT_DEFS += -DBOOTLOADER_SIZE=4096
2012-10-18 03:41:37 +02:00
# Search Path
VPATH += $(TARGET_DIR)
VPATH += $(TOP_DIR)
2012-10-19 07:06:18 +02:00
include $(TOP_DIR)/protocol/lufa.mk
2012-10-18 03:41:37 +02:00
include $(TOP_DIR)/protocol.mk
include $(TOP_DIR)/common.mk
include $(TOP_DIR)/rules.mk