2016-06-23 05:17:15 +02:00
# Included Keyboards
2021-03-07 17:14:25 +01:00
QMK runs on a diverse range of keyboards. Some of these keyboards are well maintained and see constant community contributions, while others are part of the repository for historical reasons.
2016-06-23 05:17:15 +02:00
## Official QMK Keyboards
2016-06-24 04:18:20 +02:00
### Ortholinear Keyboards - Jack Humbert
2016-06-23 05:17:15 +02:00
What makes OLKB keyboards shine is a combo of lean aesthetics, compact size, and killer tactile feel. These are available through [olkb.com ](http://olkb.com ) as well as through [Massdrop ](http://massdrop.com ) from time to time, as easy to assemble kits.
2016-08-27 23:52:32 +02:00
* [Planck ](/keyboards/planck/ ) — A 40% DIY powerhouse of customizability and modification capability. It's a lean, mean, typing machine.
* [Preonic ](/keyboards/preonic/ ) — Like the Planck, but bigger. 50%.
* [Atomic ](/keyboards/atomic/ ) — Imagine the size of the Planck. Now imagine the size of the Preonic. Now imagine _bigger_ . That is the Atomic. A 60% keyboard.
2016-06-23 05:17:15 +02:00
2016-06-24 04:18:20 +02:00
### Clueboard - Zach White
2016-06-23 05:17:15 +02:00
2016-06-24 04:18:20 +02:00
Designed and built in Felton, CA, Clueboards keyboard emphasize quality and locally sourced components, available on [clueboard.co ](http://clueboard.co )
2016-06-23 05:17:15 +02:00
2017-12-15 17:34:23 +01:00
* [Clueboard ](/keyboards/clueboard/66/ ) — The 66% custom keyboard.
* [Cluecard ](/keyboards/clueboard/card/ ) — A small board to help you hack on QMK.
* [Cluepad ](/keyboards/clueboard/17/ ) — A mechanical numpad with QMK superpowers.
2016-06-23 05:17:15 +02:00
2019-05-16 01:53:45 +02:00
### ErgoDox EZ and Planck EZ - ZSA Technology Labs
[ZSA Technology Labs ](https://ergodox-ez.com ) maintains its own [fork of QMK ](https://github.com/zsa/qmk_firmware ) which feeds its [configurator ](https://configure.ergodox-ez.com ), for stability and legal purposes. The ZSA boards are:
* [ErgoDox EZ ](/keyboards/ergodox_ez/ ) — A powerful split mechanical keyboard.
* [Planck EZ ](/keyboards/planck/ez ) — A 40% DIY powerhouse of customizability and modification capability. It's a lean, mean, typing machine, which ships fully assembled with a two-year warranty.
2016-06-23 05:17:15 +02:00
## Community-supported QMK Keyboards
These keyboards are part of the QMK repository, but their manufacturers are not official maintainers of the repository.
2017-08-25 03:13:30 +02:00
* [9key ](/keyboards/9key ) — A 9-key minipad sold by Bishop Keyboards.
2016-08-27 23:52:32 +02:00
* [Alps64 ](/keyboards/alps64 ) — A 60% keyboard for Alps keyswitches.
* [AMJ60 ](/keyboards/amj60 ) — DIY/Assembled compact 60% keyboard.
2019-03-29 14:20:25 +01:00
* [Arrow Pad ](/keyboards/handwired/arrow_pad ) — A custom creation by IBNobody.
2016-08-27 23:52:32 +02:00
* [Atreus ](/keyboards/atreus ) — Made by Technomancy.
* [Bantam44 ](/keyboards/bantam44 ) — It is a 44-key 40% staggered keyboard.
2019-01-23 00:17:41 +01:00
* [DataHand ](/keyboards/handwired/datahand ) — DataHand keyboard converted to use a Teensy board.
2017-08-24 14:00:50 +02:00
* [Ergodox Infinity ](/keyboards/ergodox_infinity ) - Ergonomic Split Keyboard by Input Club.
2016-08-27 23:52:32 +02:00
* [GH60 ](/keyboards/gh60 ) — A 60% Geekhack community-driven project.
2017-02-11 16:46:13 +01:00
* [GON NerD ](/keyboards/gonnerd ) — Korean custom 60% PCB
2016-08-27 23:52:32 +02:00
* [Happy Hacking Keyboard ](/keyboards/hhkb ) — The Happy Hacking keyboard can be hacked with a custom controller to run QMK.
* [Infinity 60% ](/keyboards/infinity60 ) - — Compact community keyboard by Input Club.
* [JD45 ](/keyboards/jd45 ) — Another Geekhack community project, designed by jdcarpe.
2018-01-28 20:46:22 +01:00
* [JJ40 ](/keyboards/jj40 ) — ps2avrGB based ortholinear sold by KPrepublic
2020-06-28 19:45:16 +02:00
* [JJ50 ](/keyboards/jj50 ) — A compact 50% (5x12) ortholinear keyboard sold by KPrepublic.
2017-06-20 07:59:17 +02:00
* [KBD75 ](/keyboards/kbd75 ) — A 75% keyboard made by made by KBDFans.
2016-08-27 23:52:32 +02:00
* [KC60 ](/keyboards/kc60 ) — A programmable Chinese-made keyboard, lost in the mists of time.
* [Kinesis Advantage ](/keyboards/kinesis ) — Contoured ergonomic keyboard by Kinesis Computer Ergonomics.
2017-06-04 22:13:17 +02:00
* [KMAC ](/keyboards/kmac ) — Korean custom keyboard.
2016-08-27 23:52:32 +02:00
* [The Kitten Paw ](/keyboards/kitten_paw ) — A replacement controller (2016 revision) for the Filco Majestouch by [Bathroom Epiphanies ](https://github.com/BathroomEpiphanies ).
* [Lets Split ](/keyboards/lets_split ) - Split ortholinear 40% keyboard.
* [Phantom ](/keyboards/phantom ) — A tenkeyless kit by Teel, also from Geekhack.
2019-03-29 14:20:25 +01:00
* [Retro Refit ](/keyboards/handwired/retro_refit ) — Another creation by IBNobody.
2018-03-01 16:45:47 +01:00
* [S60-x ](/keyboards/s60_x ) — DIY compact keyboard designed by VinnyCordeiro for Sentraq.
2016-08-27 23:52:32 +02:00
* [Satan ](/keyboards/satan ) — A GH60 variant.
* [SixKeyBoard ](/keyboards/sixkeyboard ) — A 6-key keyboard made by TechKeys.
2017-01-05 06:20:06 +01:00
* [TheVan 44 ](/keyboards/tv44 ) — A 44-key staggered keybard by Evangs.
2017-01-05 06:19:32 +01:00
* [WhiteFox ](/keyboards/whitefox ) — A 65% keyboard designed as a partnership by matt3o, Massdrop and Input Club
2016-08-27 23:52:32 +02:00
* [Vision Division ](/keyboards/vision_division ) — Full Size / Split Linear Keyboard by IBNobody.
2019-07-15 19:35:05 +02:00
* [XD004 ](/keyboards/xd004 ) — 1x4 macro keyboard sold by KPrepublic.
2017-07-30 00:59:58 +02:00
* [XD75 ](/keyboards/xd75 ) — 15x5 ortholinear keyboard by XIUDI.
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)
* LED Matrix: Reactive effect buffers & advanced indicators (#12588)
* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)
* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)
* LED Matrix: Split (#12633)
* [CI] Format code according to conventions (#12650)
* feat: infinite timeout for leader key (#6580)
* feat: implement leader_no_timeout logic
* docs(leader_key): infinite leader timeout docs
* Format code according to conventions (#12680)
* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)
* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)
Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1). Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).
* Update ADC docs to match the actually used resolution
ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly. Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).
* Fix pinToMux() for B12 and B13 on STM32F3xx
Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.
* Add support for all possible analog pins on STM32F1xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families). Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).
Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.
* Add support for all possible analog pins on STM32F4xx
Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled). These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.
Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.
Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.
* Fix STM32F3xx ADC mux table in documentation
The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).
* Add STM32F1xx ADC pins to the documentation
* Add STM32F4xx ADC pins to the documentation
* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)
* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.
* Update flashing.md
* Update chconf.h
* Update config.h
* Update halconf.h
* Update mcuconf.h
* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)
* Add support for MCU = STM32F446 (#12619)
* Add support for MCU = STM32F446
* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h
* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64
* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.
* Format code according to conventions (#12682)
* Format code according to conventions (#12687)
* Add STM32L433 and L443 support (#12063)
* initial L433 commit
* change to XC
* fix L433
* disable all peripherals
* update system and peripheral clocks
* 433 change
* use its own board files
* revert its own board files
* l433 specific change
* fix stm32l432xx define
* remove duplicate #define
* fix bootloader jump
* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h
* move to L443
* move to L443
* fix sdmmc in mcuconf.h
* include STM32L443
* add L443
* Include L443 in compatible microcontrollers
* Include L443 in compatible microcontrollers
* Update config bootloader jump description
* Update ChibiOS define reasoning
* Update quantum/mcu_selection.mk
* fix git conflict
* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)
* Fix bad PR merge for #6580. (#12721)
* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)
* [CI] Format code according to conventions (#12731)
* Fixing transport's led/rgb matrix suspend state logic (#12770)
* [CI] Format code according to conventions (#12772)
* Fix comment parsing (#12750)
* Added OLED fade out support (#12086)
* fix some references to bin/qmk that slipped in (#12832)
* Resolve a number of warnings in `qmk generate-api` (#12833)
* New command: qmk console (#12828)
* stash poc
* stash
* tidy up implementation
* Tidy up slightly for review
* Tidy up slightly for review
* Bodge environment to make tests pass
* Refactor away from asyncio due to windows issues
* Filter devices
* align vid/pid printing
* Add hidapi to the installers
* start preparing for multiple hid_listeners
* udev rules for hid_listen
* refactor to move closer to end state
* very basic implementation of the threaded model
* refactor how vid/pid/index are supplied and parsed
* windows improvements
* read the report directly when usage page isn't available
* add per-device colors, the choice to show names or numbers, and refactor
* add timestamps
* Add support for showing bootloaders
* tweak the color for bootloaders
* Align bootloader disconnect with connect color
* add support for showing all bootloaders
* fix the pyusb check
* tweaks
* fix exception
* hide a stack trace behind -v
* add --no-bootloaders option
* add documentation for qmk console
* Apply suggestions from code review
* pyformat
* clean up and flesh out KNOWN_BOOTLOADERS
* Remove pointless SERIAL_LINK_ENABLE rules (#12846)
* Make Swap Hands use PROGMEM (#12284)
This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.
* Fix another bin/qmk reference (#12856)
* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)
* Fixup build errors on `develop` branch. (#12723)
* LED Matrix: Effects! (#12651)
* Fix syntax error when compiling for ARM (#12866)
* Remove KEYMAP and LAYOUT_kc (#12160)
* alias KEYMAP to LAYOUT
* remove KEYMAP and LAYOUT_kc
* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)
* Rename `point_t` -> `led_point_t` (#12864)
* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)
* Add missing LED Matrix suspend code to suspend.c (#12878)
* LED Matrix: Documentation (#12685)
* Deprecate `send_unicode_hex_string()` (#12602)
* Fix spelling mistake regarding LED Matrix in split_common. (#12888)
* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)
* Use milc.subcommand.config instead of qmk.cli.config (#12915)
* Use milc.subcommand.config instead
* pyformat
* remove the config test
* Add function to allow repeated blinking of one layer (#12237)
* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time
* Update doc
* Rework rgblight blinking according to requested change
* optimize storage
* Fixup housekeeping from being invoked twice per loop. (#12933)
* matrix: wait for row signal to go HIGH for every row (#12945)
I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/
Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.
After this commit, all keyboard matrix rows are interpreted correctly.
I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.
* ensure we do not conflict with existing keymap aliases (#12976)
* Add support for up to 4 IS31FL3733 drivers (#12342)
* Convert Encoder callbacks to be boolean functions (#12805)
* [Keyboard] Fix Terrazzo build failure (#12977)
* Do not hard set config in CPTC files (#11864)
* [Keyboard] Corne - Remove legacy revision support (#12226)
* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)
* Add Full-duplex serial driver for ARM boards (#9842)
* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)
* Backlight: add defines for default level and breathing state (#12560)
* Add dire message about LUFA mass storage bootloader (#13014)
* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)
Was causing compiler errors on some systems.
* Fix keyboards/keymaps for boolean encoder callback changes (#12985)
* `backlight.c`: include `eeprom.h` (#13024)
* Add changelog for 2021-05-29 Breaking Changes merge (#12939)
* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version
* Add recent develop changes
* Sort recent develop changes
* Remove sections for ChibiOS changes per tzarc
No ChibiOS changes this round.
* Add and sort recent develop changes
* add notes about keyboard moves/deletions
* import changelog for PR 12172
Documents the change to BOOTMAGIC_ENABLE.
* update section headings
* re-sort changelog
* add additional note regarding Bootmagic changes
* remove changelog timestamp
* update dates in main Breaking Changes docs
* fix broken section anchors in previous changelogs
* add link to backlight/eeprom patch to changelog
* highlight some more changes
* link PRs from section headers
* Restore standard readme
* run: qmk cformat --core-only
2021-05-29 23:38:50 +02:00
* [YMDK NP21 ](/keyboards/ymdk_np21 ) — ps2avrGB based number pad (numpad) sold by YMDK on Aliexpress.
