qmk-dactyl-manuform-a/keyboards/mode/m80v1/readme.md

39 lines
1.8 KiB
Markdown
Raw Normal View History

# Mode Eighty V1 PCB QMK firmware
![MODE80](https://i.imgur.com/26uzM3yl.jpg)\
[Image Gallery](https://imgur.com/t/mechanicalkeyboards/8Uf6c2m?nc=1)
The Mode80 is a tenkeyless high-end keyboard sold by [Mode Designs](https://shop.modedesigns.com/).
* Keyboard Maintainer: [Gondolindrim](https://github.com/gondolindrim)
* Hardware Supported: proprietary PCB using STM32F072 controller
* Hardware Availability: the Mode Eighty V1 was discontinued in 2021 in favour of its second revisions. You can still buy hardware (PCBs and plates) at the Mode Designs website.
## How to flash
### Enter bootloader
The DFU state in the bootloader can be accessed in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: press the button on the front of the PCB, next to caps lock, for at least five seconds
* **Keycode in layout**: Press the key mapped to `RESET` if it is available (ESC key at layer 1 in the default layout)
## Compile firmware
After accessing the DFU state in your PCB, build the default layout using:
make mode/m80v1/m80h:default # Hotswap
make mode/m80v1/m80s:default # Soldered
Then download the resulting binary `*bin` file using `dfu-util` or QMK Toolbox.
## Compile and flash
After accessing the DFU state in your PCB, you can compile-and-flash automatically usind `dfu-util` through
make mode/m80v1/m80h:default:flash # Hotswap
make mode/m80v1/m80s:default:flash # Soldered
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).