qmk-dactyl-manuform-a/quantum/split_common/transport.c

252 lines
6.8 KiB
C
Raw Normal View History

2019-03-20 15:43:36 +01:00
#include <string.h>
#include <stddef.h>
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
#include "config.h"
#include "matrix.h"
#include "quantum.h"
#define ROWS_PER_HAND (MATRIX_ROWS / 2)
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
#ifdef RGBLIGHT_ENABLE
# include "rgblight.h"
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
#endif
#ifdef BACKLIGHT_ENABLE
# include "backlight.h"
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
#endif
#ifdef ENCODER_ENABLE
# include "encoder.h"
#endif
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
#if defined(USE_I2C) || defined(EH)
# include "i2c_master.h"
# include "i2c_slave.h"
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
typedef struct _I2C_slave_buffer_t {
matrix_row_t smatrix[ROWS_PER_HAND];
uint8_t backlight_level;
#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
rgblight_syncinfo_t rgblight_sync;
#endif
#ifdef ENCODER_ENABLE
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
uint8_t encoder_state[NUMBER_OF_ENCODERS];
#endif
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
} I2C_slave_buffer_t;
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
static I2C_slave_buffer_t * const i2c_buffer = (I2C_slave_buffer_t *)i2c_slave_reg;
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
# define I2C_BACKLIGHT_START offsetof(I2C_slave_buffer_t, backlight_level)
# define I2C_RGB_START offsetof(I2C_slave_buffer_t, rgblight_sync)
# define I2C_KEYMAP_START offsetof(I2C_slave_buffer_t, smatrix)
# define I2C_ENCODER_START offsetof(I2C_slave_buffer_t, encoder_state)
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
# define TIMEOUT 100
# ifndef SLAVE_I2C_ADDRESS
# define SLAVE_I2C_ADDRESS 0x32
# endif
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
// Get rows from other half over i2c
bool transport_master(matrix_row_t matrix[]) {
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
i2c_readReg(SLAVE_I2C_ADDRESS, I2C_KEYMAP_START, (void *)matrix, sizeof(i2c_buffer->smatrix), TIMEOUT);
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
// write backlight info
# ifdef BACKLIGHT_ENABLE
uint8_t level = is_backlight_enabled() ? get_backlight_level() : 0;
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
if (level != i2c_buffer->backlight_level) {
if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_BACKLIGHT_START, (void *)&level, sizeof(level), TIMEOUT) >= 0) {
i2c_buffer->backlight_level = level;
}
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
}
# endif
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
if (rgblight_get_change_flags()) {
rgblight_syncinfo_t rgblight_sync;
rgblight_get_syncinfo(&rgblight_sync);
if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_RGB_START,
(void *)&rgblight_sync, sizeof(rgblight_sync), TIMEOUT) >= 0) {
rgblight_clear_change_flags();
}
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
}
# endif
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
# ifdef ENCODER_ENABLE
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
i2c_readReg(SLAVE_I2C_ADDRESS, I2C_ENCODER_START, (void *)i2c_buffer->encoder_state, sizeof(I2C_slave_buffer_t.encoder_state), TIMEOUT);
encoder_update_raw(i2c_buffer->encoder_state);
# endif
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
return true;
}
void transport_slave(matrix_row_t matrix[]) {
2019-03-20 15:43:36 +01:00
// Copy matrix to I2C buffer
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
memcpy((void*)i2c_buffer->smatrix, (void *)matrix, sizeof(i2c_buffer->smatrix));
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
// Read Backlight Info
# ifdef BACKLIGHT_ENABLE
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
backlight_set(i2c_buffer->backlight_level);
# endif
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
// Update the RGB with the new data
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
if (i2c_buffer->rgblight_sync.status.change_flags != 0) {
rgblight_update_sync(&i2c_buffer->rgblight_sync, false);
i2c_buffer->rgblight_sync.status.change_flags = 0;
}
# endif
# ifdef ENCODER_ENABLE
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
encoder_state_raw(i2c_buffer->encoder_state);
# endif
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
}
void transport_master_init(void) { i2c_init(); }
void transport_slave_init(void) { i2c_slave_init(SLAVE_I2C_ADDRESS); }
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
#else // USE_SERIAL
# include "serial.h"
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
typedef struct _Serial_s2m_buffer_t {
// TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack
matrix_row_t smatrix[ROWS_PER_HAND];
# ifdef ENCODER_ENABLE
uint8_t encoder_state[NUMBER_OF_ENCODERS];
# endif
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
} Serial_s2m_buffer_t;
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
typedef struct _Serial_m2s_buffer_t {
# ifdef BACKLIGHT_ENABLE
uint8_t backlight_level;
# endif
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
} Serial_m2s_buffer_t;
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
// When MCUs on both sides drive their respective RGB LED chains,
// it is necessary to synchronize, so it is necessary to communicate RGB
// information. In that case, define RGBLIGHT_SPLIT with info on the number
// of LEDs on each half.
//
// Otherwise, if the master side MCU drives both sides RGB LED chains,
// there is no need to communicate.
typedef struct _Serial_rgblight_t {
rgblight_syncinfo_t rgblight_sync;
} Serial_rgblight_t;
volatile Serial_rgblight_t serial_rgblight = {};
uint8_t volatile status_rgblight = 0;
#endif
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
volatile Serial_s2m_buffer_t serial_s2m_buffer = {};
volatile Serial_m2s_buffer_t serial_m2s_buffer = {};
uint8_t volatile status0 = 0;
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
enum serial_transaction_id {
GET_SLAVE_MATRIX = 0,
#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
PUT_RGBLIGHT,
#endif
};
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
SSTD_t transactions[] = {
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
[GET_SLAVE_MATRIX] = {
(uint8_t *)&status0,
sizeof(serial_m2s_buffer),
(uint8_t *)&serial_m2s_buffer,
sizeof(serial_s2m_buffer),
(uint8_t *)&serial_s2m_buffer,
},
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
[PUT_RGBLIGHT] = {
(uint8_t *)&status_rgblight,
sizeof(serial_rgblight),
(uint8_t *)&serial_rgblight,
0, NULL // no slave to master transfer
},
#endif
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
};
void transport_master_init(void) { soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
void transport_slave_init(void) { soft_serial_target_init(transactions, TID_LIMIT(transactions)); }
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
#if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
// rgblight synchronization information communication.
void transport_rgblight_master(void) {
if (rgblight_get_change_flags()) {
rgblight_get_syncinfo((rgblight_syncinfo_t *)&serial_rgblight.rgblight_sync);
if (soft_serial_transaction(PUT_RGBLIGHT) == TRANSACTION_END) {
rgblight_clear_change_flags();
}
}
}
void transport_rgblight_slave(void) {
if (status_rgblight == TRANSACTION_ACCEPTED) {
rgblight_update_sync((rgblight_syncinfo_t *)&serial_rgblight.rgblight_sync,
false);
status_rgblight = TRANSACTION_END;
}
}
#else
#define transport_rgblight_master()
#define transport_rgblight_slave()
#endif
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
bool transport_master(matrix_row_t matrix[]) {
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
#ifndef SERIAL_USE_MULTI_TRANSACTION
if (soft_serial_transaction() != TRANSACTION_END) {
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
return false;
}
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
#else
transport_rgblight_master();
if (soft_serial_transaction(GET_SLAVE_MATRIX) != TRANSACTION_END) {
return false;
}
#endif
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
// TODO: if MATRIX_COLS > 8 change to unpack()
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[i] = serial_s2m_buffer.smatrix[i];
}
# ifdef BACKLIGHT_ENABLE
// Write backlight level for slave to read
serial_m2s_buffer.backlight_level = is_backlight_enabled() ? get_backlight_level() : 0;
# endif
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
# ifdef ENCODER_ENABLE
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
encoder_update_raw((uint8_t *)serial_s2m_buffer.encoder_state);
# endif
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
return true;
}
void transport_slave(matrix_row_t matrix[]) {
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
transport_rgblight_slave();
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
// TODO: if MATRIX_COLS > 8 change to pack()
for (int i = 0; i < ROWS_PER_HAND; ++i) {
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
serial_s2m_buffer.smatrix[i] = matrix[i];
}
# ifdef BACKLIGHT_ENABLE
backlight_set(serial_m2s_buffer.backlight_level);
# endif
# ifdef ENCODER_ENABLE
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
encoder_state_raw((uint8_t *)serial_s2m_buffer.encoder_state);
# endif
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
}
#endif