qmk-dactyl-manuform-a/keyboards/kc60se/rules.mk

23 lines
932 B
Makefile
Raw Normal View History

# MCU name
MCU = atmega32u4
# Bootloader selection
BOOTLOADER = atmel-dfu
# Build Options
# change yes to no to disable
Remove Full Bootmagic (#13846) * disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + ``` * update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta
2021-08-07 08:59:56 +02:00
BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite
[Keyboard] KC60SE cleanup (#8171) * coding style cleanup, enable/disable misconfigured/broken features * add SCLN missing, compile with backlight PWM warning * edit json * new info.json from KLE * new info.json from KLE using QMK converter * changes notes * notes in pull request * missing line in comments * line wrap * Update keyboards/kc60se/config.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/keymaps/default/keymap.c Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/kc60se.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/rules.mk Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * comment back in rules.mk * add 2 iso layouts and keymaps, 1 ansi kemap, compiled and tested * keymaps and info * Delete keymap.c not ready, I need to get a few iso characters corrected * Delete keymap.c not ready, need to get a few iso character define correctly * Update info.json Bspc to Backspace * no unicode * gui_on and gui_off in readme * Update keyboards/kc60se/rules.mk Co-Authored-By: fauxpark <fauxpark@gmail.com> * remove is_command * Update keyboards/kc60se/config.h remove comment Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/kc60se/config.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/kc60se/readme.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * remove \\ in keymaps * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/kc60se.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/kc60se.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/kc60se.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/kc60se.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * set led pin b2 to output mode in matrix_init_kb(), toggle it in led_update_kb() * Update config.h I had commented FORCE_NKRO out.. WHy did it com back? Co-authored-by: Check your git settings! <chris@chris-laptop> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-02-19 10:12:52 +01:00
MOUSEKEY_ENABLE = no # default keymap does not map mouse
EXTRAKEY_ENABLE = yes # Audio control and System control
[Keyboard] KC60SE cleanup (#8171) * coding style cleanup, enable/disable misconfigured/broken features * add SCLN missing, compile with backlight PWM warning * edit json * new info.json from KLE * new info.json from KLE using QMK converter * changes notes * notes in pull request * missing line in comments * line wrap * Update keyboards/kc60se/config.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/keymaps/default/keymap.c Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/kc60se.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/rules.mk Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * comment back in rules.mk * add 2 iso layouts and keymaps, 1 ansi kemap, compiled and tested * keymaps and info * Delete keymap.c not ready, I need to get a few iso characters corrected * Delete keymap.c not ready, need to get a few iso character define correctly * Update info.json Bspc to Backspace * no unicode * gui_on and gui_off in readme * Update keyboards/kc60se/rules.mk Co-Authored-By: fauxpark <fauxpark@gmail.com> * remove is_command * Update keyboards/kc60se/config.h remove comment Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/kc60se/config.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/kc60se/readme.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * remove \\ in keymaps * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/kc60se.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/kc60se.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/kc60se.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/kc60se.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * set led pin b2 to output mode in matrix_init_kb(), toggle it in led_update_kb() * Update config.h I had commented FORCE_NKRO out.. WHy did it com back? Co-authored-by: Check your git settings! <chris@chris-laptop> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-02-19 10:12:52 +01:00
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
[Keyboard] KC60SE cleanup (#8171) * coding style cleanup, enable/disable misconfigured/broken features * add SCLN missing, compile with backlight PWM warning * edit json * new info.json from KLE * new info.json from KLE using QMK converter * changes notes * notes in pull request * missing line in comments * line wrap * Update keyboards/kc60se/config.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/keymaps/default/keymap.c Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/kc60se.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/rules.mk Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * comment back in rules.mk * add 2 iso layouts and keymaps, 1 ansi kemap, compiled and tested * keymaps and info * Delete keymap.c not ready, I need to get a few iso characters corrected * Delete keymap.c not ready, need to get a few iso character define correctly * Update info.json Bspc to Backspace * no unicode * gui_on and gui_off in readme * Update keyboards/kc60se/rules.mk Co-Authored-By: fauxpark <fauxpark@gmail.com> * remove is_command * Update keyboards/kc60se/config.h remove comment Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/kc60se/config.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/kc60se/readme.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * remove \\ in keymaps * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/kc60se.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/kc60se.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/kc60se.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/kc60se.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * set led pin b2 to output mode in matrix_init_kb(), toggle it in led_update_kb() * Update config.h I had commented FORCE_NKRO out.. WHy did it com back? Co-authored-by: Check your git settings! <chris@chris-laptop> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-02-19 10:12:52 +01:00
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
UNICODE_ENABLE = no # Unicode
AUDIO_ENABLE = no # Audio output
[Keyboard] KC60SE cleanup (#8171) * coding style cleanup, enable/disable misconfigured/broken features * add SCLN missing, compile with backlight PWM warning * edit json * new info.json from KLE * new info.json from KLE using QMK converter * changes notes * notes in pull request * missing line in comments * line wrap * Update keyboards/kc60se/config.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/keymaps/default/keymap.c Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/kc60se.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/rules.mk Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/readme.md Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * comment back in rules.mk * add 2 iso layouts and keymaps, 1 ansi kemap, compiled and tested * keymaps and info * Delete keymap.c not ready, I need to get a few iso characters corrected * Delete keymap.c not ready, need to get a few iso character define correctly * Update info.json Bspc to Backspace * no unicode * gui_on and gui_off in readme * Update keyboards/kc60se/rules.mk Co-Authored-By: fauxpark <fauxpark@gmail.com> * remove is_command * Update keyboards/kc60se/config.h remove comment Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/kc60se/config.h Co-Authored-By: fauxpark <fauxpark@gmail.com> * Update keyboards/kc60se/readme.md Co-Authored-By: fauxpark <fauxpark@gmail.com> * remove \\ in keymaps * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/kc60se.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/kc60se.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/kc60se.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/kc60se.h Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * Update keyboards/kc60se/info.json Co-Authored-By: James Young <18669334+noroadsleft@users.noreply.github.com> * set led pin b2 to output mode in matrix_init_kb(), toggle it in led_update_kb() * Update config.h I had commented FORCE_NKRO out.. WHy did it com back? Co-authored-by: Check your git settings! <chris@chris-laptop> Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com> Co-authored-by: Ryan <fauxpark@gmail.com>
2020-02-19 10:12:52 +01:00
LAYOUTS = 60_ansi 60_ansi_split_bs_rshift 60_iso 60_iso_split_bs_rshift