qmk-dactyl-manuform-a/quantum/split_common/transport.c

368 lines
11 KiB
C
Raw Normal View History

2019-03-20 15:43:36 +01:00
#include <string.h>
#include <stddef.h>
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
#include "config.h"
#include "matrix.h"
#include "quantum.h"
#define ROWS_PER_HAND (MATRIX_ROWS / 2)
#define SYNC_TIMER_OFFSET 2
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
#ifdef RGBLIGHT_ENABLE
2019-08-30 20:19:03 +02:00
# include "rgblight.h"
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
#endif
#ifdef BACKLIGHT_ENABLE
2019-08-30 20:19:03 +02:00
# include "backlight.h"
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
#endif
#ifdef ENCODER_ENABLE
2019-08-30 20:19:03 +02:00
# include "encoder.h"
static pin_t encoders_pad[] = ENCODERS_PAD_A;
2019-08-30 20:19:03 +02:00
# define NUMBER_OF_ENCODERS (sizeof(encoders_pad) / sizeof(pin_t))
#endif
#if defined(USE_I2C)
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
2019-08-30 20:19:03 +02:00
# include "i2c_master.h"
# include "i2c_slave.h"
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
typedef struct _I2C_slave_buffer_t {
# ifndef DISABLE_SYNC_TIMER
uint32_t sync_timer;
# endif
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
matrix_row_t smatrix[ROWS_PER_HAND];
# ifdef SPLIT_MODS_ENABLE
uint8_t real_mods;
uint8_t weak_mods;
# ifndef NO_ACTION_ONESHOT
uint8_t oneshot_mods;
# endif
# endif
# ifdef BACKLIGHT_ENABLE
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
uint8_t backlight_level;
# endif
2019-08-30 20:19:03 +02:00
# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
rgblight_syncinfo_t rgblight_sync;
2019-08-30 20:19:03 +02:00
# endif
# ifdef ENCODER_ENABLE
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
uint8_t encoder_state[NUMBER_OF_ENCODERS];
2019-08-30 20:19:03 +02:00
# endif
# ifdef WPM_ENABLE
uint8_t current_wpm;
# endif
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
} I2C_slave_buffer_t;
2019-08-30 20:19:03 +02:00
static I2C_slave_buffer_t *const i2c_buffer = (I2C_slave_buffer_t *)i2c_slave_reg;
# define I2C_SYNC_TIME_START offsetof(I2C_slave_buffer_t, sync_timer)
# define I2C_KEYMAP_START offsetof(I2C_slave_buffer_t, smatrix)
# define I2C_REAL_MODS_START offsetof(I2C_slave_buffer_t, real_mods)
# define I2C_WEAK_MODS_START offsetof(I2C_slave_buffer_t, weak_mods)
# define I2C_ONESHOT_MODS_START offsetof(I2C_slave_buffer_t, oneshot_mods)
2019-08-30 20:19:03 +02:00
# define I2C_BACKLIGHT_START offsetof(I2C_slave_buffer_t, backlight_level)
# define I2C_RGB_START offsetof(I2C_slave_buffer_t, rgblight_sync)
# define I2C_ENCODER_START offsetof(I2C_slave_buffer_t, encoder_state)
# define I2C_WPM_START offsetof(I2C_slave_buffer_t, current_wpm)
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
2019-08-30 20:19:03 +02:00
# define TIMEOUT 100
2019-08-30 20:19:03 +02:00
# ifndef SLAVE_I2C_ADDRESS
# define SLAVE_I2C_ADDRESS 0x32
# endif
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
// Get rows from other half over i2c
bool transport_master(matrix_row_t matrix[]) {
2019-08-30 20:19:03 +02:00
i2c_readReg(SLAVE_I2C_ADDRESS, I2C_KEYMAP_START, (void *)matrix, sizeof(i2c_buffer->smatrix), TIMEOUT);
// write backlight info
# ifdef BACKLIGHT_ENABLE
uint8_t level = is_backlight_enabled() ? get_backlight_level() : 0;
if (level != i2c_buffer->backlight_level) {
if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_BACKLIGHT_START, (void *)&level, sizeof(level), TIMEOUT) >= 0) {
i2c_buffer->backlight_level = level;
}
}
2019-08-30 20:19:03 +02:00
# endif
# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
if (rgblight_get_change_flags()) {
rgblight_syncinfo_t rgblight_sync;
rgblight_get_syncinfo(&rgblight_sync);
if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_RGB_START, (void *)&rgblight_sync, sizeof(rgblight_sync), TIMEOUT) >= 0) {
rgblight_clear_change_flags();
}
}
2019-08-30 20:19:03 +02:00
# endif
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
2019-08-30 20:19:03 +02:00
# ifdef ENCODER_ENABLE
i2c_readReg(SLAVE_I2C_ADDRESS, I2C_ENCODER_START, (void *)i2c_buffer->encoder_state, sizeof(i2c_buffer->encoder_state), TIMEOUT);
encoder_update_raw(i2c_buffer->encoder_state);
# endif
# ifdef WPM_ENABLE
uint8_t current_wpm = get_current_wpm();
if (current_wpm != i2c_buffer->current_wpm) {
if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_WPM_START, (void *)&current_wpm, sizeof(current_wpm), TIMEOUT) >= 0) {
i2c_buffer->current_wpm = current_wpm;
}
}
# endif
# ifdef SPLIT_MODS_ENABLE
uint8_t real_mods = get_mods();
if (real_mods != i2c_buffer->real_mods) {
if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_REAL_MODS_START, (void *)&real_mods, sizeof(real_mods), TIMEOUT) >= 0) {
i2c_buffer->real_mods = real_mods;
}
}
uint8_t weak_mods = get_weak_mods();
if (weak_mods != i2c_buffer->weak_mods) {
if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_WEAK_MODS_START, (void *)&weak_mods, sizeof(weak_mods), TIMEOUT) >= 0) {
i2c_buffer->weak_mods = weak_mods;
}
}
# ifndef NO_ACTION_ONESHOT
uint8_t oneshot_mods = get_oneshot_mods();
if (oneshot_mods != i2c_buffer->oneshot_mods) {
if (i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_ONESHOT_MODS_START, (void *)&oneshot_mods, sizeof(oneshot_mods), TIMEOUT) >= 0) {
i2c_buffer->oneshot_mods = oneshot_mods;
}
}
# endif
# endif
# ifndef DISABLE_SYNC_TIMER
i2c_buffer->sync_timer = sync_timer_read32() + SYNC_TIMER_OFFSET;
i2c_writeReg(SLAVE_I2C_ADDRESS, I2C_SYNC_TIME_START, (void *)&i2c_buffer->sync_timer, sizeof(i2c_buffer->sync_timer), TIMEOUT);
# endif
2019-08-30 20:19:03 +02:00
return true;
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
}
void transport_slave(matrix_row_t matrix[]) {
# ifndef DISABLE_SYNC_TIMER
sync_timer_update(i2c_buffer->sync_timer);
# endif
2019-08-30 20:19:03 +02:00
// Copy matrix to I2C buffer
memcpy((void *)i2c_buffer->smatrix, (void *)matrix, sizeof(i2c_buffer->smatrix));
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
// Read Backlight Info
2019-08-30 20:19:03 +02:00
# ifdef BACKLIGHT_ENABLE
backlight_set(i2c_buffer->backlight_level);
# endif
# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
// Update the RGB with the new data
if (i2c_buffer->rgblight_sync.status.change_flags != 0) {
rgblight_update_sync(&i2c_buffer->rgblight_sync, false);
i2c_buffer->rgblight_sync.status.change_flags = 0;
}
# endif
# ifdef ENCODER_ENABLE
encoder_state_raw(i2c_buffer->encoder_state);
# endif
# ifdef WPM_ENABLE
set_current_wpm(i2c_buffer->current_wpm);
# endif
# ifdef SPLIT_MODS_ENABLE
set_mods(i2c_buffer->real_mods);
set_weak_mods(i2c_buffer->weak_mods);
# ifndef NO_ACTION_ONESHOT
set_oneshot_mods(i2c_buffer->oneshot_mods);
# endif
# endif
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
}
void transport_master_init(void) { i2c_init(); }
void transport_slave_init(void) { i2c_slave_init(SLAVE_I2C_ADDRESS); }
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
#else // USE_SERIAL
2019-08-30 20:19:03 +02:00
# include "serial.h"
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
typedef struct _Serial_s2m_buffer_t {
2019-08-30 20:19:03 +02:00
// TODO: if MATRIX_COLS > 8 change to uint8_t packed_matrix[] for pack/unpack
matrix_row_t smatrix[ROWS_PER_HAND];
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
2019-08-30 20:19:03 +02:00
# ifdef ENCODER_ENABLE
uint8_t encoder_state[NUMBER_OF_ENCODERS];
2019-08-30 20:19:03 +02:00
# endif
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
} Serial_s2m_buffer_t;
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
typedef struct _Serial_m2s_buffer_t {
# ifdef SPLIT_MODS_ENABLE
uint8_t real_mods;
uint8_t weak_mods;
# ifndef NO_ACTION_ONESHOT
uint8_t oneshot_mods;
# endif
# endif
# ifndef DISABLE_SYNC_TIMER
uint32_t sync_timer;
# endif
2019-08-30 20:19:03 +02:00
# ifdef BACKLIGHT_ENABLE
uint8_t backlight_level;
# endif
# ifdef WPM_ENABLE
uint8_t current_wpm;
# endif
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
} Serial_m2s_buffer_t;
2019-08-30 20:19:03 +02:00
# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
// When MCUs on both sides drive their respective RGB LED chains,
// it is necessary to synchronize, so it is necessary to communicate RGB
// information. In that case, define RGBLIGHT_SPLIT with info on the number
// of LEDs on each half.
//
// Otherwise, if the master side MCU drives both sides RGB LED chains,
// there is no need to communicate.
typedef struct _Serial_rgblight_t {
rgblight_syncinfo_t rgblight_sync;
} Serial_rgblight_t;
volatile Serial_rgblight_t serial_rgblight = {};
uint8_t volatile status_rgblight = 0;
2019-08-30 20:19:03 +02:00
# endif
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
volatile Serial_s2m_buffer_t serial_s2m_buffer = {};
volatile Serial_m2s_buffer_t serial_m2s_buffer = {};
uint8_t volatile status0 = 0;
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
enum serial_transaction_id {
GET_SLAVE_MATRIX = 0,
2019-08-30 20:19:03 +02:00
# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
PUT_RGBLIGHT,
2019-08-30 20:19:03 +02:00
# endif
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
};
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
SSTD_t transactions[] = {
2019-08-30 20:19:03 +02:00
[GET_SLAVE_MATRIX] =
{
(uint8_t *)&status0,
sizeof(serial_m2s_buffer),
(uint8_t *)&serial_m2s_buffer,
sizeof(serial_s2m_buffer),
(uint8_t *)&serial_s2m_buffer,
},
# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
[PUT_RGBLIGHT] =
{
(uint8_t *)&status_rgblight, sizeof(serial_rgblight), (uint8_t *)&serial_rgblight, 0, NULL // no slave to master transfer
},
# endif
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
};
void transport_master_init(void) { soft_serial_initiator_init(transactions, TID_LIMIT(transactions)); }
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
void transport_slave_init(void) { soft_serial_target_init(transactions, TID_LIMIT(transactions)); }
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
2019-08-30 20:19:03 +02:00
# if defined(RGBLIGHT_ENABLE) && defined(RGBLIGHT_SPLIT)
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
// rgblight synchronization information communication.
void transport_rgblight_master(void) {
2019-08-30 20:19:03 +02:00
if (rgblight_get_change_flags()) {
rgblight_get_syncinfo((rgblight_syncinfo_t *)&serial_rgblight.rgblight_sync);
if (soft_serial_transaction(PUT_RGBLIGHT) == TRANSACTION_END) {
rgblight_clear_change_flags();
}
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
}
}
void transport_rgblight_slave(void) {
2019-08-30 20:19:03 +02:00
if (status_rgblight == TRANSACTION_ACCEPTED) {
rgblight_update_sync((rgblight_syncinfo_t *)&serial_rgblight.rgblight_sync, false);
status_rgblight = TRANSACTION_END;
}
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
}
2019-08-30 20:19:03 +02:00
# else
# define transport_rgblight_master()
# define transport_rgblight_slave()
# endif
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
bool transport_master(matrix_row_t matrix[]) {
2019-08-30 20:19:03 +02:00
# ifndef SERIAL_USE_MULTI_TRANSACTION
if (soft_serial_transaction() != TRANSACTION_END) {
return false;
}
# else
transport_rgblight_master();
if (soft_serial_transaction(GET_SLAVE_MATRIX) != TRANSACTION_END) {
return false;
}
# endif
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
2019-08-30 20:19:03 +02:00
// TODO: if MATRIX_COLS > 8 change to unpack()
for (int i = 0; i < ROWS_PER_HAND; ++i) {
matrix[i] = serial_s2m_buffer.smatrix[i];
}
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
2019-08-30 20:19:03 +02:00
# ifdef BACKLIGHT_ENABLE
// Write backlight level for slave to read
serial_m2s_buffer.backlight_level = is_backlight_enabled() ? get_backlight_level() : 0;
# endif
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
2019-08-30 20:19:03 +02:00
# ifdef ENCODER_ENABLE
encoder_update_raw((uint8_t *)serial_s2m_buffer.encoder_state);
# endif
# ifdef WPM_ENABLE
// Write wpm to slave
serial_m2s_buffer.current_wpm = get_current_wpm();
# endif
# ifdef SPLIT_MODS_ENABLE
serial_m2s_buffer.real_mods = get_mods();
serial_m2s_buffer.weak_mods = get_weak_mods();
# ifndef NO_ACTION_ONESHOT
serial_m2s_buffer.oneshot_mods = get_oneshot_mods();
# endif
# endif
# ifndef DISABLE_SYNC_TIMER
serial_m2s_buffer.sync_timer = sync_timer_read32() + SYNC_TIMER_OFFSET;
# endif
2019-08-30 20:19:03 +02:00
return true;
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
}
void transport_slave(matrix_row_t matrix[]) {
2019-08-30 20:19:03 +02:00
transport_rgblight_slave();
# ifndef DISABLE_SYNC_TIMER
sync_timer_update(serial_m2s_buffer.sync_timer);
# endif
2019-08-30 20:19:03 +02:00
// TODO: if MATRIX_COLS > 8 change to pack()
for (int i = 0; i < ROWS_PER_HAND; ++i) {
serial_s2m_buffer.smatrix[i] = matrix[i];
}
# ifdef BACKLIGHT_ENABLE
backlight_set(serial_m2s_buffer.backlight_level);
# endif
Change split_common to use RGBLIGHT_SPLIT (#5509) * add I2C_slave_buffer_t to quantum/split_common/transport.c Improvements to ease the maintenance of the I2C slave buffer layout. And this commit does not change the compilation results. * add temporary pdhelix(Patched Helix) code * temporary cherry-pick from #5020 add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * add post_config.h support to build_keyboard.mk * add quantum/rgblight_post_config.h, quantum/split_common/post_config.h Add quantum/rgblight_post_config.h and quantum/split_common/post_config.h using POST_CONFIG_H variable of build_keyboard.mk. quantum/rgblight_post_config.h additionally defines RGBLIGHT_SPLIT if RGBLED_SPIT is defined. quantum/split_common/post_config.h defines RGBLIGHT_SPLIT additionally when master-slave communication is I2C. * Change split_common's transport.c I2C to use the synchronization feature of rgblight.c * Change split_common's transport.c serial to use the synchronization feature of rgblight.c * test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix * Test End Revert "test RGBLIGHT_SPLIT on keyboards/handwired/pdhelix" This reverts commit 80118a6bbd3d9fc4c7797fef0c34bc67aa73aa98. [x] make RGBLIGHT_TEST=1 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/i2c:default (same RGBLIGHT_TEST=3) [x] make RGBLIGHT_TEST=3 handwired/pdhelix/i2c:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2:default [x] make RGBLIGHT_TEST=1 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=2 handwired/pdhelix/pd2_2oled:default [x] make RGBLIGHT_TEST=3 handwired/pdhelix/pd2_2oled:default * Test End, Revert "temporary cherry-pick from #5020" This reverts commit d35069f68bda0c50370442a5c7aae60c2f4ce5c0. * Test End, Revert "add temporary pdhelix(Patched Helix) code" This reverts commit aebddfc1a879796afae297ef0723a4fe73af3660. * temporarily cherry-pick from #5020 to see if it passes the travis-ci test. add new version(#5020) quantum/rgblight.[ch], quantum/rgblight_modes.h * Passed the travis-ci test. Revert "temporarily cherry-pick from #5020 to see if it passes the travis-ci test." This reverts commit 647c0a9755eb6a05f76d09b2d59bce67b85a841f. * update docs/config_options.md * update split_common/transport.c, improves maintainability of serial transaction IDs. No change in build result. * temporary cherry-pick from #5020 * fix build fail keebio/iris/rev3:default * fix build fail lets_split_eh/eh:default * Revert "temporary cherry-pick from #5020" This reverts commit be48ca1b4515366a097af8dd1cd7b28b7ee09947. * temporary cherry-pick from #5020 (0.6.336) * Revert "temporary cherry-pick from #5020 (0.6.336)" This reverts commit 978d26a8b3cf0acc485838a7d76d6128b77c630c. * temporary cherry-pick from #5020 (0.6.336)
2019-04-20 00:25:08 +02:00
2019-08-30 20:19:03 +02:00
# ifdef ENCODER_ENABLE
encoder_state_raw((uint8_t *)serial_s2m_buffer.encoder_state);
# endif
# ifdef WPM_ENABLE
set_current_wpm(serial_m2s_buffer.current_wpm);
# endif
# ifdef SPLIT_MODS_ENABLE
set_mods(serial_m2s_buffer.real_mods);
set_weak_mods(serial_m2s_buffer.weak_mods);
# ifndef NO_ACTION_ONESHOT
set_oneshot_mods(serial_m2s_buffer.oneshot_mods);
# endif
# endif
Simplify split_common Code significantly (#4772) * Eliminate separate slave loop Both master and slave run the standard keyboard_task main loop now. * Refactor i2c/serial specific code Simplify some of the preprocessor mess by using common function names. * Fix missing #endif * Move direct pin mapping support from miniaxe to split_common For boards with more pins than sense--sorry, switches. * Reordering and reformatting only * Don't run matrix_scan_quantum on slave side * Clean up the offset/slaveOffset calculations * Cut undebounced matrix size in half * Refactor debouncing * Minor fixups * Split split_common transport and debounce code into their own files Can now be replaced with custom versions per keyboard using CUSTOM_TRANSPORT = yes and CUSTOM_DEBOUNCE = yes * Refactor debounce for non-split keyboards too * Update handwired/xealous to build using new split_common * Fix debounce breaking basic test * Dodgy method to allow a split kb to only include one of i2c/serial SPLIT_TRANSPORT = serial or SPLIT_TRANSPORT = i2c will include only that driver code in the binary. SPLIT_TRANSPORT = custom (or anything else) will include neither, the keyboard must supply it's own code if SPLIT_TRANSPORT is not defined then the original behaviour (include both avr i2c and serial code) is maintained. This could be better but it would require explicitly updating all the existing split keyboards. * Enable LTO to get lets_split/sockets under the line * Add docs for SPLIT_TRANSPORT, CUSTOM_MATRIX, CUSTOM_DEBOUNCE * Remove avr-specific sei() from split matrix_setup Not needed now that slave doesn't have a separate main loop. Both sides (on avr) call sei() in lufa's main() after exiting keyboard_setup(). * Fix QUANTUM_LIB_SRC references and simplify SPLIT_TRANSPORT. * Add comments and fix formatting.
2019-01-17 19:08:14 +01:00
}
#endif