qmk-dactyl-manuform-a/keyboards/vn66/config.h

146 lines
4.5 KiB
C
Raw Normal View History

/*
Copyright 2019 HnahKB
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
2020-10-28 20:14:11 +01:00
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0xCA2C
#define DEVICE_VER 0x0001
#define MANUFACTURER HnahKB
2020-10-28 20:14:11 +01:00
#define PRODUCT VN66
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 14
/*
* Keyboard Matrix Assignments
*
* Change this to how you wired your keyboard
* COLS: AVR pins used for columns, left to right
* ROWS: AVR pins used for rows, top to bottom
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
*
*/
2020-10-28 20:14:11 +01:00
#define MATRIX_ROW_PINS { B1, B2, B3, D2, F7 }
#define MATRIX_COL_PINS { F6, F5, F4, F1, F0, C6, C7, B5, B4, D7, D6, D4, D5, D3 }
#define UNUSED_PINS
2020-10-28 20:14:11 +01:00
/* COL2ROW, ROW2COL */
#define DIODE_DIRECTION COL2ROW
#define BACKLIGHT_PIN B6
#define BACKLIGHT_LEVELS 4
2020-10-28 20:14:11 +01:00
#define BACKLIGHT_BREATHING
#define ENCODERS_PAD_A { B0 }
#define ENCODERS_PAD_B { B7 }
#define ENCODER_RESOLUTION 2
#define RGB_DI_PIN E2
2020-10-28 20:14:11 +01:00
#ifdef RGB_DI_PIN
# define RGBLED_NUM 20
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
//# define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== all animations enable ==*/
# define RGBLIGHT_ANIMATIONS
/*== or choose animations ==*/
//# define RGBLIGHT_EFFECT_BREATHING
//# define RGBLIGHT_EFFECT_RAINBOW_MOOD
//# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
//# define RGBLIGHT_EFFECT_SNAKE
//# define RGBLIGHT_EFFECT_KNIGHT
//# define RGBLIGHT_EFFECT_CHRISTMAS
//# define RGBLIGHT_EFFECT_STATIC_GRADIENT
//# define RGBLIGHT_EFFECT_RGB_TEST
//# define RGBLIGHT_EFFECT_ALTERNATING
/*== customize breathing effect ==*/
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
//# define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
/*==== use exp() and sin() ====*/
//# define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
//# define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
#endif
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
2020-10-28 20:14:11 +01:00
#define DEBOUNCE 5
/* define if matrix has ghost (lacks anti-ghosting diodes) */
//#define MATRIX_HAS_GHOST
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
2020-10-28 20:14:11 +01:00
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
*/
#define GRAVE_ESC_CTRL_OVERRIDE
2020-10-28 20:14:11 +01:00
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
/* disable these deprecated features by default */
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
/* Bootmagic Lite key configuration */
//#define BOOTMAGIC_LITE_ROW 0
//#define BOOTMAGIC_LITE_COLUMN 0