qmk-dactyl-manuform-a/keyboards/moonlander/config.h

104 lines
3.0 KiB
C
Raw Normal View History

2020-08-22 16:44:42 +02:00
/* Copyright 2020 ZSA Technology Labs, Inc <@zsa>
* Copyright 2020 Jack Humbert <jack.humb@gmail.com>
* Copyright 2020 Drashna Jael're <drashna@live.com>
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
// clang-format off
#define VENDOR_ID 0x3297
#define PRODUCT_ID 0x1969
#define MANUFACTURER ZSA Technology Labs
#define PRODUCT Moonlander Mark I
#define DEVICE_VER 0x0001
#define WEBUSB_LANDING_PAGE_URL u8"configure.ergodox-ez.com"
// clang-format on
/* key matrix size */
#define MATRIX_ROWS 12
#define MATRIX_COLS 7
/* PCB default pin-out */
// #define MATRIX_ROW_PINS { B10, B11, B12, B13, B14, B15 }
// #define MATRIX_COL_PINS { A0, A1, A2, A3, A6, A7, B0 }
// #define MCP23_ROW_PINS { GPB5, GBP4, GBP3, GBP2, GBP1, GBP0 }
// #define MCP23_COL_PINS { GPA0, GBA1, GBA2, GBA3, GBA4, GBA5, GBA6 }
// #define MCP23_LED_R GPB7
// #define MCP23_LED_G GPB6
// #define MCP23_LED_B GPA7
#define EEPROM_I2C_24LC128
// Not needed, is default address:
// #define EXTERNAL_EEPROM_I2C_BASE_ADDRESS 0b10100000
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION ROW2COL
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
#define DRIVER_ADDR_1 0b1110100
#define DRIVER_ADDR_2 0b1110111
#define DRIVER_COUNT 2
#define DRIVER_1_LED_TOTAL 36
#define DRIVER_2_LED_TOTAL 36
#define DRIVER_LED_TOTAL (DRIVER_1_LED_TOTAL + DRIVER_2_LED_TOTAL)
#define RGB_MATRIX_CENTER { 125, 26 }
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 175
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
#define RGB_MATRIX_KEYPRESSES
#define RGB_DISABLE_WHEN_USB_SUSPENDED true
#define MUSIC_MAP
#define FIRMWARE_VERSION_SIZE 17
#define DYNAMIC_KEYMAP_EEPROM_ADDR (EECONFIG_SIZE + FIRMWARE_VERSION_SIZE)
#ifdef EEPROM_I2C
# define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 16383
# define DYNAMIC_KEYMAP_LAYER_COUNT 32
#endif