qmk-dactyl-manuform-a/drivers/sensors/pmw3360.h

95 lines
2.9 KiB
C
Raw Normal View History

/* Copyright 2020 Christopher Courtney, aka Drashna Jael're (@drashna) <drashna@live.com>
* Copyright 2019 Sunjun Kim
* Copyright 2020 Ploopy Corporation
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include <stdint.h>
#include "report.h"
#include "spi_master.h"
#ifndef PMW3360_CPI
# define PMW3360_CPI 1600
#endif
#ifndef PMW3360_CLOCK_SPEED
# define PMW3360_CLOCK_SPEED 2000000
#endif
#ifndef PMW3360_SPI_LSBFIRST
# define PMW3360_SPI_LSBFIRST false
#endif
#ifndef PMW3360_SPI_MODE
# define PMW3360_SPI_MODE 3
#endif
#ifndef PMW3360_SPI_DIVISOR
# ifdef __AVR__
# define PMW3360_SPI_DIVISOR (F_CPU / PMW3360_CLOCK_SPEED)
# else
# define PMW3360_SPI_DIVISOR 64
# endif
#endif
#ifndef ROTATIONAL_TRANSFORM_ANGLE
# define ROTATIONAL_TRANSFORM_ANGLE 0x00
#endif
#ifndef PMW3360_CS_PIN
# error "No chip select pin defined -- missing PMW3360_CS_PIN"
#endif
/*
The pmw33660 and pmw3389 use the same registers and timing and such.
The only differences between the two is the firmware used, and the
range for the DPI. So add a semi-secret hack to allow use of the
pmw3389's firmware blob. Also, can set the max cpi range too.
This should work for the 3390 and 3391 too, in theory.
*/
#ifndef PMW3360_FIRMWARE_H
# define PMW3360_FIRMWARE_H "pmw3360_firmware.h"
#endif
#ifdef CONSOLE_ENABLE
void print_byte(uint8_t byte);
#endif
typedef struct {
int8_t motion;
bool isMotion; // True if a motion is detected.
bool isOnSurface; // True when a chip is on a surface
int16_t dx; // displacement on x directions. Unit: Count. (CPI * Count = Inch value)
int8_t mdx;
int16_t dy; // displacement on y directions.
int8_t mdy;
} report_pmw3360_t;
bool spi_start_adv(void);
void spi_stop_adv(void);
spi_status_t spi_write_adv(uint8_t reg_addr, uint8_t data);
uint8_t spi_read_adv(uint8_t reg_addr);
bool pmw3360_init(void);
void pmw3360_set_cpi(uint16_t cpi);
uint16_t pmw3360_get_cpi(void);
void pmw3360_upload_firmware(void);
bool pmw3360_check_signature(void);
report_pmw3360_t pmw3360_read_burst(void);
#define degToRad(angleInDegrees) ((angleInDegrees)*M_PI / 180.0)
#define radToDeg(angleInRadians) ((angleInRadians)*180.0 / M_PI)