qmk-dactyl-manuform-a/keyboards/handwired/bluepill/boards/GENERIC_STM32_F103/board.h

171 lines
4.7 KiB
C
Raw Normal View History

Add Bluepill (stm32f103) handwired keyboard (#4126) * Main folder Main folder with some changes like the base layout and matrix for uploading in a future to the qmk repositorie * First Commit Firsts non previously commited changes: -Changed to keyboards/handwired -Basic credit to Xydane -70% Layout * Modified file structure for several keyboards As I don't want to create several folders and overcrowd the main folders I made a few modifications to being able of configure several keyboards as revisions of the main keyboard. Added a second variant. Compiling tests went right but I haven't tried it on the controller. * Starting leds * Started dual color leds PWM functions and configs I started to create the PWM functions and configs based on internet examples, it doesn't compile yet * Backtraced a bit to establish and try debug before continuing the pwm Just this, algo some doc as a new pinout image, space cadet modification to try if it works and little more * Deleted unuseful stuff After trying the reestructure to being compatible with several keyboards and that it worked I deleted the other keyboard. Added space cadet shift to ISO. Finally I couldn't debug everything and I'm getting quite frustrated to continue much more than just adding pwm leds * Changed again Iso fix for Space Cadet * Renamed keyboard, future pull I just renamed the keyboard and made some simplifying changes in order to make a pull request sometime soon. I'm too frustrated, tired and knowledge limited to achive using the PWM for leds, I didn't even get to use the debug mode... I intend to end basic led color change using layers (if I can), document everything properly and make a pull request so other users can continue/use this project. * Writed Readme.md file I also corrected a previous compilation problem and ordered a bit the keymaps * Corrected readme * Try to add layer activated light * Revert "Try to add layer activated light" This reverts commit 205af820d845dab08988f329b9f062f558060220. * Progress to fork Coming back to work, upcoming pull * Linked image Corrected readme * Some cleanning Added images to readme, som cleaning, burning after commit. * Almost finished (working) Finally * Finished bluepill firmware Just finished and tried layer dependant led colors. Going for merge * Deleted innecesary stuff and trailing spaces Just as commit title said. * Coding conventions Just modified some files to respect coding conventions * Deleted XXXXXX define Checking some other PR seen this improvement * Changes suggested on PR Firs doing the easy changes * More changes for the PR -I also deleted one unused function for led toggling on matrix.c (Now it uses layer dependent baklight, algo on of on start) -Deleted commented function on keymaps. Right now only needs testing and all pragma replaces. * Almost every pragma change on PR That's almost finished, only waiting for reply due to compiling errors * Revert "Almost every pragma change on PR" This reverts commit 07f23aa862b370cdf0ae37d6f2130c9e9856f491. * Revert last commit I moddified by mistake a file from another keyboard * Solved last pragma Compiles fine. Now I only need to test it, I say you if it works to include it in the main repository.
2018-10-22 20:45:46 +02:00
/*
ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
#ifndef _BOARD_H_
#define _BOARD_H_
/*
* Setup for a Generic STM32F103 board.
*/
/*
* Board identifier.
*/
#define BOARD_GENERIC_STM32_F103
#define BOARD_NAME "Generic STM32F103x board"
/*
* Board frequencies.
*/
#define STM32_LSECLK 32768
#define STM32_HSECLK 8000000
/*
* MCU type, supported types are defined in ./os/hal/platforms/hal_lld.h.
*/
#define STM32F103xB
/*
* IO pins assignments
*/
/* on-board */
#define GPIOC_LED 13
#define GPIOD_OSC_IN 0
#define GPIOD_OSC_OUT 1
/* Backlighting */
/*#define GPIOC_BACKLIGHT_PIN 15*/
/* In case your board has a "USB enable" hardware
controlled by a pin, define it here. (It could be just
a 1.5k resistor connected to D+ line.)
*/
/*
#define GPIOB_USB_DISC 10
*/
/*
* I/O ports initial setup, this configuration is established soon after reset
* in the initialization code.
*
* The digits have the following meaning:
* 0 - Analog input.
* 1 - Push Pull output 10MHz.
* 2 - Push Pull output 2MHz.
* 3 - Push Pull output 50MHz.
* 4 - Digital input.
* 5 - Open Drain output 10MHz.
* 6 - Open Drain output 2MHz.
* 7 - Open Drain output 50MHz.
* 8 - Digital input with PullUp or PullDown resistor depending on ODR.
* 9 - Alternate Push Pull output 10MHz.
* A - Alternate Push Pull output 2MHz.
* B - Alternate Push Pull output 50MHz.
* C - Reserved.
* D - Alternate Open Drain output 10MHz.
* E - Alternate Open Drain output 2MHz.
* F - Alternate Open Drain output 50MHz.
* Please refer to the STM32 Reference Manual for details.
*/
/*
* Port A setup.
* Everything input with pull-up except:
* PA2 - Alternate output (USART2 TX).
* PA3 - Normal input (USART2 RX).
* PA9 - Alternate output (USART1 TX).
* PA10 - Normal input (USART1 RX).
*/
#define VAL_GPIOACRL 0x88884B88 /* PA7...PA0 */
#define VAL_GPIOACRH 0x888884B8 /* PA15...PA8 */
#define VAL_GPIOAODR 0xFFFFFFFF
/*
* Port B setup.
* Everything input with pull-up except:
* PB10 - Push Pull output (USB switch).
*/
#define VAL_GPIOBCRL 0x88888888 /* PB7...PB0 */
#define VAL_GPIOBCRH 0x88888388 /* PB15...PB8 */
#define VAL_GPIOBODR 0xFFFFFFFF
/*
* Port C setup.
* Everything input with pull-up except:
* PC13 - Push Pull output (LED).
*/
#define VAL_GPIOCCRL 0x88888888 /* PC7...PC0 */
#define VAL_GPIOCCRH 0x88388888 /* PC15...PC8 */
#define VAL_GPIOCODR 0xFFFFFFFF
/*
* Port D setup.
* Everything input with pull-up except:
* PD0 - Normal input (XTAL).
* PD1 - Normal input (XTAL).
*/
#define VAL_GPIODCRL 0x88888844 /* PD7...PD0 */
#define VAL_GPIODCRH 0x88888888 /* PD15...PD8 */
#define VAL_GPIODODR 0xFFFFFFFF
/*
* Port E setup.
* Everything input with pull-up except:
*/
#define VAL_GPIOECRL 0x88888888 /* PE7...PE0 */
#define VAL_GPIOECRH 0x88888888 /* PE15...PE8 */
#define VAL_GPIOEODR 0xFFFFFFFF
/*
* USB bus activation macro, required by the USB driver.
*/
/* The point is that most of the generic STM32F103* boards
have a 1.5k resistor connected on one end to the D+ line
and on the other end to some pin. Or even a slightly more
complicated "USB enable" circuit, controlled by a pin.
That should go here.
However on some boards (e.g. one that I have), there's no
such hardware. In which case it's better to not do anything.
*/
/*
#define usb_lld_connect_bus(usbp) palClearPad(GPIOB, GPIOB_USB_DISC)
*/
#define usb_lld_connect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_INPUT);
/*
* USB bus de-activation macro, required by the USB driver.
*/
/*
#define usb_lld_disconnect_bus(usbp) palSetPad(GPIOB, GPIOB_USB_DISC)
*/
#define usb_lld_disconnect_bus(usbp) palSetPadMode(GPIOA, 12, PAL_MODE_OUTPUT_PUSHPULL); palClearPad(GPIOA, 12);
#if !defined(_FROM_ASM_)
#ifdef __cplusplus
extern "C" {
#endif
void boardInit(void);
#ifdef __cplusplus
}
#endif
#endif /* _FROM_ASM_ */
#endif /* _BOARD_H_ */