qmk-dactyl-manuform-a/keyboards/keebio/iris/rev6/config.h

92 lines
2.9 KiB
C
Raw Normal View History

/*
Copyright 2021 Danny Nguyen <danny@keeb.io>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* USB Device descriptor parameter */
#define VENDOR_ID 0xCB10
#define PRODUCT_ID 0x6256
#define DEVICE_VER 0x0600
#define MANUFACTURER Keebio
#define PRODUCT Iris Rev. 6
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 10
#define MATRIX_COLS 6
// wiring of each half
#define MATRIX_ROW_PINS { B1, F0, F5, B4, D7 }
#define MATRIX_COL_PINS { F1, F4, B5, C7, D4, D6 }
#define MATRIX_ROW_PINS_RIGHT { B1, F0, F5, B4, B5 }
#define MATRIX_COL_PINS_RIGHT { D4, D6, D7, C7, F1, F4 }
#define SPLIT_HAND_PIN D5
#define ENCODERS_PAD_A { B2 }
#define ENCODERS_PAD_B { B3 }
#define ENCODERS_PAD_A_RIGHT { B2 }
#define ENCODERS_PAD_B_RIGHT { B3 }
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* define if matrix has ghost */
//#define MATRIX_HAS_GHOST
/* number of backlight levels */
// #define BACKLIGHT_LEVELS 3
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* serial.c configuration for split keyboard */
#define SOFT_SERIAL_PIN D0
/* ws2812 RGB LED */
#define RGB_DI_PIN E6
#ifdef RGB_DI_PIN
# define RGBLED_NUM 68
# define RGBLED_SPLIT { 34, 34 }
# define RGBLIGHT_HUE_STEP 8
# define RGBLIGHT_SAT_STEP 8
# define RGBLIGHT_VAL_STEP 8
# define RGBLIGHT_LIMIT_VAL 120 /* The maximum brightness level */
# define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
/*== enabled animations ==*/
# define RGBLIGHT_EFFECT_BREATHING
# define RGBLIGHT_EFFECT_RAINBOW_MOOD
# define RGBLIGHT_EFFECT_RAINBOW_SWIRL
# define RGBLIGHT_EFFECT_SNAKE
# define RGBLIGHT_EFFECT_KNIGHT
# define RGBLIGHT_EFFECT_CHRISTMAS
# define RGBLIGHT_EFFECT_STATIC_GRADIENT
# define RGBLIGHT_EFFECT_RGB_TEST
# define RGBLIGHT_EFFECT_ALTERNATING
# define RGBLIGHT_EFFECT_TWINKLE
# define RGBLIGHT_DEFAULT_VAL 120
# define RGBLIGHT_DEFAULT_MODE (RGBLIGHT_MODE_RAINBOW_SWIRL + 2)
// RGB Matrix
# ifdef RGB_MATRIX_ENABLE
# define RGB_MATRIX_MAXIMUM_BRIGHTNESS 160
# define RGB_MATRIX_STARTUP_VAL RGB_MATRIX_MAXIMUM_BRIGHTNESS
# define DRIVER_LED_TOTAL RGBLED_NUM
# define RGB_MATRIX_SPLIT { 34, 34 }
# define RGB_DISABLE_WHEN_USB_SUSPENDED
//# define RGB_MATRIX_KEYPRESSES
# endif
#endif