/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* USB Device descriptor parameter */
#define VENDOR_ID 0xFEED
#define PRODUCT_ID 0x9991
#define DEVICE_VER 0x0001
#define MANUFACTURER monksoffunk
#define PRODUCT zinc rev.1
#define TAPPING_FORCE_HOLD
#define TAPPING_TERM 100
/* Use I2C or Serial */
#define USE_SERIAL
#define SOFT_SERIAL_PIN D2
/* Select hand configuration */
#define MASTER_LEFT
//#define MASTER_RIGHT
//#define EE_HANDS
/* key matrix size */
// Rows are doubled-up
#define MATRIX_ROWS 8
#define MATRIX_ROW_PINS { F6, F7, B1, B3 }
// wiring of each half
#define MATRIX_COLS 6
#define MATRIX_COL_PINS { F4, D4, C6, D7, E6, B4 }
#define DIODE_DIRECTION COL2ROW
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
//#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
//#define LOCKING_RESYNC_ENABLE
/* ws2812 RGB LED */
#define RGB_DI_PIN D3
// RGB LED support
//#define RGBLIGHT_ANIMATIONS : see ./rules.mk: LED_ANIMATIONS = yes or no
// see ./rules.mk: LED_BACK_ENABLE or LED_UNDERGLOW_ENABLE set yes
#ifdef RGBLIGHT_ENABLE
#define RGBLIGHT_SPLIT
#ifdef RGBLED_BACK
#ifdef RGBLED_CONT
#define RGBLED_NUM 48
#define RGBLED_SPLIT { 24, 24 }
#else
#define RGBLED_NUM 24
#endif
#ifdef RGBLED_BOTH
#define RGBLED_NUM 60
#define RGBLED_SPLIT { 30, 30 }
// #define RGBLIGHT_LED_MAP {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29}
#define RGBLED_NUM 30
#define RGBLED_NUM 12
#define RGBLED_SPLIT { 6, 6 }
#define RGBLED_NUM 6
#ifndef IOS_DEVICE_ENABLE
#if (RGBLED_NUM <= 6) || (defined(RGBLED_CONT) && (RGBLED_NUM <= 12))
#define RGBLIGHT_LIMIT_VAL 255
#if (RGBLED_NUM <= 16) || (defined(RGBLED_CONT) && (RGBLED_NUM <= 32))
#define RGBLIGHT_LIMIT_VAL 130
#define RGBLIGHT_LIMIT_VAL 120
#define RGBLIGHT_VAL_STEP 17
#define RGBLIGHT_LIMIT_VAL 90
#define RGBLIGHT_LIMIT_VAL 45
#define RGBLIGHT_LIMIT_VAL 35
#define RGBLIGHT_VAL_STEP 4
#define RGBLIGHT_HUE_STEP 10
#define RGBLIGHT_SAT_STEP 17
#if defined(RGBLIGHT_ENABLE) && !defined(IOS_DEVICE_ENABLE)
// USB_MAX_POWER_CONSUMPTION value
// 120 RGBoff
// 330 RGB 6
// 300 RGB 32
#define USB_MAX_POWER_CONSUMPTION 400
// fix iPhone and iPad power adapter issue
// iOS device need lessthan 100
#define USB_MAX_POWER_CONSUMPTION 100
* Feature disable options
* These options are also useful to firmware size reduction.
/* disable debug print */
// #define NO_DEBUG
/* disable print */
// #define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION
