andrejl
/
qmk-dactyl-manuform-a
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
qmk-dactyl-manuform-a/keyboards/ferris/keymaps/pierrec83/keymap.json

119 lines
7.6 KiB
JSON
Raw Normal View History

Ferris reorganization (#10564) * Add my own keymap * Layer 0: Workman * Layer 1: RSTHD (my own take on it) * Layer 2: Mouse * Layer 3: Navigation * Layer 4: Symbols right * Layer 5: Symbols left * Layer 6: Fn keys * Layer 7: Numbers * Layer 8: Vim and misceallaneaous accessible from any other layer * Move the current code to a 0.1 folder in preparation for upcoming changes Version 0.2 is currently being prototyped and uses an arm chip which will need its own firmware. There is also the Ferris sweep which uses a pro-micro compatible board which will need its own directory. * Move Ferris out of handwired and into the light The keyboard is now well out of the prototype phase as tens of them have been produced and acquired by various people. With 0.2 coming out, adoption is going to increase again as the board will be available for sale at some recognized vendors. Now is probably a good time to recognize its status as more than a prototype :) * Add code for the Ferris Sweep (a.k.a cradio) The Ferris Sweep is a creation of the talented @davidphilipbarr, a.k.a DPB. It has the key layout of a Ferris and uses a pro-micro connected to the switches via direct pins so that diodes are not needed and the soldering is minimal. With their blessing, I took the code for it from DPB's own repo: https://github.com/davidphilipbarr/36keys/tree/master/qmk/cradio and did some adaptations such as removing commented out code, enabling EE_HANDS and mouse keys for consistency with my existing Ferris code. * Fix indentation in rules.mk * Fix indentation in sweep's config * Remove unnecessary lines from sweep's rules.mk * Remove unnecessary lines from sweep's rules.mk * Rename 0.1 to 0_1 This avoids the dot looking like the separation between a filename and its extension. In the same commit, bring matrix.c to the 0_1 folder as this was needed for the code to compile properly (matrix.c is referred to in the readme under `0_1` and is specific to that revision of the firmware). * Update copyright statements for Sweep
2020-10-17 21:20:34 +02:00
{ "version": 1,
"notes": "My awesome keymap",
"documentation": "\"This file is a QMK Configurator export. You can import this at <https://config.qmk.fm>. It can also be used directly with QMK's source code.\n\nTo setup your QMK environment check out the tutorial: <https://docs.qmk.fm/#/newbs>\n\nYou can convert this file to a keymap.c using this command: `qmk json2c {keymap}`\n\nYou can compile this keymap using this command: `qmk compile {keymap}`\"\n",
Remove stale references to "handwired/ferris" The code was moved to the "ferris" directory. Fixes the following commands: ``` qmk compile ~/qmk_firmware/keyboards/ferris/keymaps/default/keymap.json qmk compile ~/qmk_firmware/keyboards/ferris/keymaps/pierrec83/keymap.json ``` Addresses this issue: https://github.com/pierrechevalier83/ferris/issues/5
2021-03-05 14:35:41 +01:00
"keyboard": "ferris/0_1",
Ferris reorganization (#10564) * Add my own keymap * Layer 0: Workman * Layer 1: RSTHD (my own take on it) * Layer 2: Mouse * Layer 3: Navigation * Layer 4: Symbols right * Layer 5: Symbols left * Layer 6: Fn keys * Layer 7: Numbers * Layer 8: Vim and misceallaneaous accessible from any other layer * Move the current code to a 0.1 folder in preparation for upcoming changes Version 0.2 is currently being prototyped and uses an arm chip which will need its own firmware. There is also the Ferris sweep which uses a pro-micro compatible board which will need its own directory. * Move Ferris out of handwired and into the light The keyboard is now well out of the prototype phase as tens of them have been produced and acquired by various people. With 0.2 coming out, adoption is going to increase again as the board will be available for sale at some recognized vendors. Now is probably a good time to recognize its status as more than a prototype :) * Add code for the Ferris Sweep (a.k.a cradio) The Ferris Sweep is a creation of the talented @davidphilipbarr, a.k.a DPB. It has the key layout of a Ferris and uses a pro-micro connected to the switches via direct pins so that diodes are not needed and the soldering is minimal. With their blessing, I took the code for it from DPB's own repo: https://github.com/davidphilipbarr/36keys/tree/master/qmk/cradio and did some adaptations such as removing commented out code, enabling EE_HANDS and mouse keys for consistency with my existing Ferris code. * Fix indentation in rules.mk * Fix indentation in sweep's config * Remove unnecessary lines from sweep's rules.mk * Remove unnecessary lines from sweep's rules.mk * Rename 0.1 to 0_1 This avoids the dot looking like the separation between a filename and its extension. In the same commit, bring matrix.c to the 0_1 folder as this was needed for the code to compile properly (matrix.c is referred to in the readme under `0_1` and is specific to that revision of the firmware). * Update copyright statements for Sweep
2020-10-17 21:20:34 +02:00
"keymap": "pierrec83",
"layout": "LAYOUT",
"layers": [
["KC_Q" , "KC_D" , "KC_R" , "KC_W" , "KC_B",
"KC_J" , "KC_F" , "KC_U" , "KC_P" , "KC_SCLN",
"LSFT_T(KC_A)" , "LT(6,KC_S)" , "LT(2,KC_H)" , "LT(4,KC_T)" , "KC_G",
"KC_Y" , "LT(5,KC_N)" , "LT(3,KC_E)" , "LT(7,KC_O)" , "LSFT_T(KC_I)",
"KC_Z" , "LCTL_T(KC_X)" , "LALT_T(KC_M)" , "KC_C" , "KC_V",
"KC_K" , "KC_L" , "LALT_T(KC_COMM)", "LCTL_T(KC_DOT)" , "KC_SLSH",
"LCA(KC_UP)" , "KC_BSPC",
"LT(8,KC_SPC)" , "LCA(KC_DOWN)"
],
["KC_Q" , "KC_C" , "KC_M" , "KC_Y" , "KC_COLN",
"KC_Z" , "KC_W" , "KC_COMM" , "KC_U" , "KC_J",
"LSFT_T(KC_R)" , "LT(6,KC_S)" , "LT(2,KC_T)" , "LT(4,KC_H)" , "KC_X",
"KC_TRNS" , "LT(5,KC_N)" , "LT(3,KC_A)" , "LT(7,KC_I)" , "LSFT_T(KC_O)",
"KC_B" , "LCTL_T(KC_F)" , "LALT_T(KC_G)" , "KC_D" , "KC_V",
"KC_ESC" , "KC_L" , "LALT_T(KC_DOT)" , "LCTL_T(KC_BSPC)" , "KC_K",
"LCA(KC_UP)" , "KC_E",
"LT(8,KC_SPC)" , "LCA(KC_DOWN)"
],
["KC_TRNS" , "ANY(LCTL(LSFT(KC_C)))", "KC_TRNS" , "ANY(LCTL(LSFT(KC_V)))", "KC_TRNS",
"KC_TRNS" , "KC_BTN1" , "KC_WH_U" , "KC_BTN2" , "KC_TRNS",
"KC_TRNS" , "KC_BTN2" , "KC_NO" , "KC_BTN1" , "KC_TRNS",
"KC_TRNS" , "KC_MS_L" , "KC_MS_D" , "KC_MS_U" , "KC_MS_R",
"KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS",
"KC_TRNS" , "KC_WH_L" , "KC_WH_D" , "KC_WH_R" , "KC_TRNS",
"ANY(LCTL(LSFT(KC_TAB)))", "KC_TRNS",
"KC_TRNS" , "LCTL(KC_TAB)"
],
["KC_TRNS" , "KC_TRNS" , "KC_PGUP" , "KC_TRNS" , "KC_TRNS",
"KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS",
"KC_LEFT" , "KC_UP" , "KC_DOWN" , "KC_RGHT" , "KC_TRNS",
"KC_TRNS" , "KC_LGUI" , "KC_NO" , "LCTL(KC_LALT)" , "LCA(KC_LSFT)",
"KC_TRNS" , "KC_HOME" , "KC_PGDN" , "KC_END" , "KC_TRNS",
"KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS",
Support all the 0.2 Ferris variants (#12653) * Support all the 0.2 Ferris variants For the Compact, the High and the Mini, create a new directory so each keyboard may have the correct USB descriptor and a readme with more specific information about it. For the Bling, also add support for the underglow functionality. Change the "MANUFACTURER" string to "Cuddly Keyboards Ltd.", the name of the company I incorporated to sell keyboards, and change the default descriptor from "Ferris the keeb" to "Ferris 0.2" which is more descriptive. I didn't update the 0.1 variants as I don't intend to sell these kits with "Cuddly Keyboards". The firmware is mostly there to support existing users. Update the "hardware availability" to point to my new website: cuddlykeyboards.com. * Add RGB mode toggle to my keymap and to the default keymap * Improve wording in the readme
2021-08-09 20:23:15 +02:00
"RGB_RMOD" , "KC_TRNS",
"KC_TRNS" , "RGB_MOD"
Ferris reorganization (#10564) * Add my own keymap * Layer 0: Workman * Layer 1: RSTHD (my own take on it) * Layer 2: Mouse * Layer 3: Navigation * Layer 4: Symbols right * Layer 5: Symbols left * Layer 6: Fn keys * Layer 7: Numbers * Layer 8: Vim and misceallaneaous accessible from any other layer * Move the current code to a 0.1 folder in preparation for upcoming changes Version 0.2 is currently being prototyped and uses an arm chip which will need its own firmware. There is also the Ferris sweep which uses a pro-micro compatible board which will need its own directory. * Move Ferris out of handwired and into the light The keyboard is now well out of the prototype phase as tens of them have been produced and acquired by various people. With 0.2 coming out, adoption is going to increase again as the board will be available for sale at some recognized vendors. Now is probably a good time to recognize its status as more than a prototype :) * Add code for the Ferris Sweep (a.k.a cradio) The Ferris Sweep is a creation of the talented @davidphilipbarr, a.k.a DPB. It has the key layout of a Ferris and uses a pro-micro connected to the switches via direct pins so that diodes are not needed and the soldering is minimal. With their blessing, I took the code for it from DPB's own repo: https://github.com/davidphilipbarr/36keys/tree/master/qmk/cradio and did some adaptations such as removing commented out code, enabling EE_HANDS and mouse keys for consistency with my existing Ferris code. * Fix indentation in rules.mk * Fix indentation in sweep's config * Remove unnecessary lines from sweep's rules.mk * Remove unnecessary lines from sweep's rules.mk * Rename 0.1 to 0_1 This avoids the dot looking like the separation between a filename and its extension. In the same commit, bring matrix.c to the 0_1 folder as this was needed for the code to compile properly (matrix.c is referred to in the readme under `0_1` and is specific to that revision of the firmware). * Update copyright statements for Sweep
2020-10-17 21:20:34 +02:00
],
["KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS",
"KC_TRNS" , "KC_UNDS" , "KC_PIPE" , "KC_QUOT" , "KC_TRNS",
"KC_CIRC" , "KC_ASTR" , "KC_AMPR" , "KC_NO" , "KC_TRNS",
"KC_HASH" , "KC_TILD" , "KC_SLSH" , "KC_DQUO" , "KC_DLR",
"KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS",
"KC_TRNS" , "KC_MINS" , "KC_BSLS" , "KC_GRV" , "KC_TRNS",
"KC_BRID" , "KC_TRNS",
"KC_TRNS" , "KC_BRIU"
],
["KC_TRNS" , "KC_COLN" , "KC_LT" , "KC_GT" , "KC_SCLN",
"KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS",
"KC_LCBR" , "KC_RCBR" , "KC_LPRN" , "KC_RPRN" , "KC_AT",
"KC_TRNS" , "KC_NO" , "KC_EQL" , "KC_PLUS" , "KC_PERC",
"KC_TRNS" , "KC_EXLM" , "KC_LBRC" , "KC_RBRC" , "KC_TRNS",
"KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS",
"KC_VOLD" , "KC_TRNS",
"KC_TRNS" , "KC_VOLU"
],
["KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS",
"KC_TRNS" , "KC_F7" , "KC_F8" , "KC_F9" , "KC_F10",
"KC_TRNS" , "KC_TRNS" , "LCTL(KC_LALT)" , "KC_TRNS" , "KC_TRNS",
"KC_TRNS" , "KC_F4" , "KC_F5" , "KC_F6" , "KC_F11",
"KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS",
"KC_TRNS" , "KC_F1" , "KC_F2" , "KC_F3" , "KC_F12",
"KC_TRNS" , "KC_TRNS",
"KC_TRNS" , "KC_TRNS"
],
["KC_PSLS" , "KC_7" , "KC_8" , "KC_9" , "KC_PPLS",
"KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS",
"KC_0" , "KC_1" , "KC_2" , "KC_3" , "KC_PMNS",
"KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_NO" , "KC_TRNS",
"KC_PAST" , "KC_4" , "KC_5" , "KC_6" , "KC_PEQL",
"KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS",
"KC_TRNS" , "KC_TRNS",
"KC_TRNS" , "KC_TRNS"
],
["KC_TRNS" , "KC_ESC" , "KC_COLN" , "KC_TRNS" , "KC_TRNS",
"DF(2)" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_DEL",
"KC_TRNS" , "KC_PERC" , "KC_SLSH" , "KC_ENT" , "KC_EXLM",
"DF(1)" , "KC_LGUI" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS",
"KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS" , "KC_TRNS",
"DF(0)" , "KC_TRNS" , "RALT_T(KC_COMM)", "RCTL_T(KC_DOT)" , "RESET",
"KC_TRNS" , "KC_TAB",
"KC_NO" , "KC_TRNS"
]
],
"author": "@pierrec83"
}