qmk-dactyl-manuform-a/layouts/community/split_3x6_3/drashna/rules.mk

35 lines
1.4 KiB
Makefile
Raw Normal View History

# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
[Keymap] Update to Drashna Keymaps (#5594) * Start to standardize macro timer * Update Fractal layout Specifically, limit the RGB Lighting, since it's too many for the power, and only have the KITT annimation on the front * Update Iris keymap to use I2C for transport * Remove TAP_CODE_DELAY from keyboard in favor of global setting * Remove Woodpad Since it\'s no longer in my possession * Only enable LTO on AVR boards * Run matrix_scans while doing startup light * Run matrix_scan to get split keyboard code synced properly * Fix rgb mode * Remove custom debouncing settings * Make RGB Light Startup Animation optional * Fix opt def * Remove extra tap code delay value * Fix references to keebio boards * Add support for LP Iris keyboard * Add backlight code * Make startup animation optional * Update gitlab ci script * Remove port declaration * Revert avrgcc changes to gitlab ci file * Don't re-set mods * Remove MACRO_TIMER define * Add custom name for crkbd * Add name for Prime M pad * Add names for ortho 4x12 boards * Add some additional handling for rgb init * Change thumb clusters on ergodox * Switch Orthodox to I2C * Fix Space in ergodox keymap * Use OSL for ergodox layout * Ugh, can't find a good layout * Fix typo * Fix up animation startup * Cries in AVR * Fix makefiles for ergodox ez boards * Add support for "secret songs" in my userspace * Reset debounce to 5ms for Ergodox EZ * Fix gitlab CI yaml file * More crying in AVR * Cannot use rgb light and rgb matrix at the same time due to the WS2812 rgb matrix PR until the "Coexistance" PR is merged * Update ODox for split common and i2c * Add split config * Impement Split code * Add support for xscorpion OLED code * Add OLED display config * Fix OLED screen font * Get OLED set up in vertical mode * Remove old OLED code * add per key support for crkbd * Fix split changes * RGB Tweeaks * More OLED tweaks * Fix rotation stuff * Fix more OLED stuff * Remove custom Debounce from Ergodox layout since it's no longer needed
2019-04-22 20:55:55 +02:00
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
AUDIO_ENABLE = no # Audio output
[Keymap] Update to Drashna Keymaps (#5594) * Start to standardize macro timer * Update Fractal layout Specifically, limit the RGB Lighting, since it's too many for the power, and only have the KITT annimation on the front * Update Iris keymap to use I2C for transport * Remove TAP_CODE_DELAY from keyboard in favor of global setting * Remove Woodpad Since it\'s no longer in my possession * Only enable LTO on AVR boards * Run matrix_scans while doing startup light * Run matrix_scan to get split keyboard code synced properly * Fix rgb mode * Remove custom debouncing settings * Make RGB Light Startup Animation optional * Fix opt def * Remove extra tap code delay value * Fix references to keebio boards * Add support for LP Iris keyboard * Add backlight code * Make startup animation optional * Update gitlab ci script * Remove port declaration * Revert avrgcc changes to gitlab ci file * Don't re-set mods * Remove MACRO_TIMER define * Add custom name for crkbd * Add name for Prime M pad * Add names for ortho 4x12 boards * Add some additional handling for rgb init * Change thumb clusters on ergodox * Switch Orthodox to I2C * Fix Space in ergodox keymap * Use OSL for ergodox layout * Ugh, can't find a good layout * Fix typo * Fix up animation startup * Cries in AVR * Fix makefiles for ergodox ez boards * Add support for "secret songs" in my userspace * Reset debounce to 5ms for Ergodox EZ * Fix gitlab CI yaml file * More crying in AVR * Cannot use rgb light and rgb matrix at the same time due to the WS2812 rgb matrix PR until the "Coexistance" PR is merged * Update ODox for split common and i2c * Add split config * Impement Split code * Add support for xscorpion OLED code * Add OLED display config * Fix OLED screen font * Get OLED set up in vertical mode * Remove old OLED code * add per key support for crkbd * Fix split changes * RGB Tweeaks * More OLED tweaks * Fix rotation stuff * Fix more OLED stuff * Remove custom Debounce from Ergodox layout since it's no longer needed
2019-04-22 20:55:55 +02:00
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
[Keymap] Update to Drashna Keymaps (#5594) * Start to standardize macro timer * Update Fractal layout Specifically, limit the RGB Lighting, since it's too many for the power, and only have the KITT annimation on the front * Update Iris keymap to use I2C for transport * Remove TAP_CODE_DELAY from keyboard in favor of global setting * Remove Woodpad Since it\'s no longer in my possession * Only enable LTO on AVR boards * Run matrix_scans while doing startup light * Run matrix_scan to get split keyboard code synced properly * Fix rgb mode * Remove custom debouncing settings * Make RGB Light Startup Animation optional * Fix opt def * Remove extra tap code delay value * Fix references to keebio boards * Add support for LP Iris keyboard * Add backlight code * Make startup animation optional * Update gitlab ci script * Remove port declaration * Revert avrgcc changes to gitlab ci file * Don't re-set mods * Remove MACRO_TIMER define * Add custom name for crkbd * Add name for Prime M pad * Add names for ortho 4x12 boards * Add some additional handling for rgb init * Change thumb clusters on ergodox * Switch Orthodox to I2C * Fix Space in ergodox keymap * Use OSL for ergodox layout * Ugh, can't find a good layout * Fix typo * Fix up animation startup * Cries in AVR * Fix makefiles for ergodox ez boards * Add support for "secret songs" in my userspace * Reset debounce to 5ms for Ergodox EZ * Fix gitlab CI yaml file * More crying in AVR * Cannot use rgb light and rgb matrix at the same time due to the WS2812 rgb matrix PR until the "Coexistance" PR is merged * Update ODox for split common and i2c * Add split config * Impement Split code * Add support for xscorpion OLED code * Add OLED display config * Fix OLED screen font * Get OLED set up in vertical mode * Remove old OLED code * add per key support for crkbd * Fix split changes * RGB Tweeaks * More OLED tweaks * Fix rotation stuff * Fix more OLED stuff * Remove custom Debounce from Ergodox layout since it's no longer needed
2019-04-22 20:55:55 +02:00
SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
ifeq ($(strip $(KEYBOARD)), crkbd/rev1)
OLED_DRIVER_ENABLE = yes
2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-28 21:02:18 +01:00
RGB_MATRIX_ENABLE = yes
HAPTIC_ENABLE = no
BOOTLOADER = qmk-dfu
endif
[Keymap] Cleanup and updating of drashna keymap code (#11516) * Update other keyboards for rgb matrix changes * Remove customized bootmagic code * Fix corne layout compilation error * Fix compiler errors with all keymaps * Add Simple Visualizer for ergodox infinity * Fix compile issue with Corne * Fix keymap stuff * Add alias for mouse layer * Add Halmak Keyboard layout * Updates for Kyria * Add support for oled interval * Change RGB stuff [CHANGE] Fix coexistence issues * Fix rgb_stuff * Add custom ploopyco mouse keymap * Decrease default dwell time * Updates based on last breaking changes update * Disable command on dactyl * Update ergodox to use proper commands for rgb matrix indicators * Update all rgb matrix indicator functions * Update rules for dactyl-manuform * Reduce wait time for mouse layer off event * Add more info to logger * Add wrappers for get_tapping term * Move version.h include into only file that actually needs it * Update rgb sleep stuff * Update key print function * Change DM keymap settings * Change pin for DM Manuform * Add Proton C stuff for Corne keymap * more arm corne tinkering * Even more arm stuff for corne * Cleanup corne stuff * redirect default keymap to drashna because I am a very bad man * change corne rgb priority * Update tractyl manuform to not conflict * Add more secret stuff * more dactyl tweaks * Add more options to split transport * Changes of oled support * Change split settings * Improve keylogger formatting more * tweak oled stuff * Oled and such tweaks * Reduce brightness due to leds * Decrease brightness more * Only run layer code if master
2021-01-22 17:23:03 +01:00
ifeq ($(strip $(CTPC)), yes)
HAPTIC_ENABLE = no
WS2812_DRIVER = pwm # won't work without a patch to the ctpc mk file
[Keymap] Cleanup and updating of drashna keymap code (#11516) * Update other keyboards for rgb matrix changes * Remove customized bootmagic code * Fix corne layout compilation error * Fix compiler errors with all keymaps * Add Simple Visualizer for ergodox infinity * Fix compile issue with Corne * Fix keymap stuff * Add alias for mouse layer * Add Halmak Keyboard layout * Updates for Kyria * Add support for oled interval * Change RGB stuff [CHANGE] Fix coexistence issues * Fix rgb_stuff * Add custom ploopyco mouse keymap * Decrease default dwell time * Updates based on last breaking changes update * Disable command on dactyl * Update ergodox to use proper commands for rgb matrix indicators * Update all rgb matrix indicator functions * Update rules for dactyl-manuform * Reduce wait time for mouse layer off event * Add more info to logger * Add wrappers for get_tapping term * Move version.h include into only file that actually needs it * Update rgb sleep stuff * Update key print function * Change DM keymap settings * Change pin for DM Manuform * Add Proton C stuff for Corne keymap * more arm corne tinkering * Even more arm stuff for corne * Cleanup corne stuff * redirect default keymap to drashna because I am a very bad man * change corne rgb priority * Update tractyl manuform to not conflict * Add more secret stuff * more dactyl tweaks * Add more options to split transport * Changes of oled support * Change split settings * Improve keylogger formatting more * tweak oled stuff * Oled and such tweaks * Reduce brightness due to leds * Decrease brightness more * Only run layer code if master
2021-01-22 17:23:03 +01:00
SERIAL_DRIVER = usart
SWAP_HANDS_ENABLE = yes
[Keymap] Cleanup and updating of drashna keymap code (#11516) * Update other keyboards for rgb matrix changes * Remove customized bootmagic code * Fix corne layout compilation error * Fix compiler errors with all keymaps * Add Simple Visualizer for ergodox infinity * Fix compile issue with Corne * Fix keymap stuff * Add alias for mouse layer * Add Halmak Keyboard layout * Updates for Kyria * Add support for oled interval * Change RGB stuff [CHANGE] Fix coexistence issues * Fix rgb_stuff * Add custom ploopyco mouse keymap * Decrease default dwell time * Updates based on last breaking changes update * Disable command on dactyl * Update ergodox to use proper commands for rgb matrix indicators * Update all rgb matrix indicator functions * Update rules for dactyl-manuform * Reduce wait time for mouse layer off event * Add more info to logger * Add wrappers for get_tapping term * Move version.h include into only file that actually needs it * Update rgb sleep stuff * Update key print function * Change DM keymap settings * Change pin for DM Manuform * Add Proton C stuff for Corne keymap * more arm corne tinkering * Even more arm stuff for corne * Cleanup corne stuff * redirect default keymap to drashna because I am a very bad man * change corne rgb priority * Update tractyl manuform to not conflict * Add more secret stuff * more dactyl tweaks * Add more options to split transport * Changes of oled support * Change split settings * Improve keylogger formatting more * tweak oled stuff * Oled and such tweaks * Reduce brightness due to leds * Decrease brightness more * Only run layer code if master
2021-01-22 17:23:03 +01:00
endif