Imagemagick does not generate svg images very well, but it can convert
them to png quite well.
For browsers that don't yet support displaying svg, this also provides a
workaround; just scale the svg down to get a png. But the workaround is
partial, since scaling the image larger, or leaving it the same size will
cause the original svg to be displayed. Since browsers are actively
improving svg support, this is good enough for me.
Needed for attachment to return json when requested.
I think some browsers send Accept: * , so I made sure to check that json
was explicitly listed as to be accepted, as well as having a high
priority.
Two problems fixed:
1. Files are written with a .ikiwiki-new suffix, which has to be taken into
account.
2. Need to count length of bytes, not of unicode characters.
Arguably, the real bug is in the interface to add_autofile, but since
that does take a filename, not a page name, it cannot really do case
handling on its own. The only other users of add_autofile in ikiwiki proper
is autoindex, and it always uses one case. Other third party plugins might
also need to add similar workarounds though.
* comments: Add avatar picture of comment author, using Libravatar::URL
when available. The avatar is looked up based on (Thanks, Francois Marier)
* Recommend libgravatar-url-perl, which contains Libravatar::URL.
This has been a while coming. It turns out that non-excutable setup files
have a number of benefits. Also, I find YAML setup files easier to edit
myself, and I suspect many users will prefer not needing to deal with
perl syntax.
Problem was this: websetup loads all plugins, but does not checkconfig
them. So, htmltidy's recently added configurable command setting was unset;
this resulted in its sanitize hook failing; the sanitize hook is called
when a sidebar was enabled, and this caused the sidebar to not display.
I put in a fix, but the underlying problem is that websetup loads all
plugins but leaves them in an unconfigured and possibly broken state while
trying to display its forms.
Probably the long-term fix is to have it cache the original hook states from
before loading the plugins, and restore it after getting their configuration.
Or, even to get the configuration using a subprocess, as plugins may do things
outside the hook system.
Now that page.tmpl is used for cgi, the parentlinks are able to be
displayed even when creating or editing a page. So it's redundant to
include the path to the page in the title, remove it.
There seems no need to allow selecting a location when creating a page this
way; the user should always want it to appear in the inline whose form they
submitted.
and support all elements that HTML::Tagset knows about.
(Which doesn't include html5 just yet, but then the old version didn't either.)
Bonus: 4 times faster than old regexp method.
So formbuilder has an annoying glitch, that setting the value of a
checkbox, even without force, will override the value currently on the
form. Thus the guards against changing checkbox values when a form has been
submitted.
But those guards also prevented the checkboxes for advanced items getting
the right value when going into advanced mode.
Note that if the user makes changes to advanced mode stuff and leaves
advanced mode, those changes are lost. That seems reasonable so I didn't
change it -- and it made this fix simple.
With a relative xrds-location, the openid perl client module will fail.
I haven't checked the specs to see if it needs to be absolute, but all
examples I've seen are absolute, so it seems a very good idea.
I also tried setting RPC::XML::ENCODING but that did not prevent the crash,
and it seems that blogspam.net doesn't like getting xml encoded in unicode,
since it mis-flagged comments as spammy that way that are normally allowed
through.
The rss spec says that unless the attribute is set, guid elements *are*
permalinks. The problem with that is that if [[meta permalink=]] is used,
as is done with aggregated posts, that goes into the link element, and
apparently some rss readers prefer the not-really-permalink in the guid
element when linking to the post.
Without meta permalink, the link and guid elements have the same content,
so it should be ok, in that case too for the guid to not be a permalink.
(Checked and this does not flood aggregators.)
The idea here is that <meta name="foo" description="bar">
can be written like [[!meta name="foo" description="bar">.
Of course, [[!meta foo=bar]] is still supported; this new feature
provides some DWIM when trying to directly convert a meta tag into
a meta directive.
template_depends was adding a dependency on the source filename,
instead of on the page name when a template is a page. Such a
dependency doesn't work.
Since misctemplate is called with a page context, the comments plugin
thinks it should add that, as well as the comment link in the actionbar.
I kept the comment link because a quick link back to the comments to a page
is sorta useful.
Cleanly fixed case where destdir file failed to be written because there
was a directory with the same name. This can be detected with no extra
system calls, and dealt with by finding all pages that wrote files
inside the directory, and removing them and the directory.
The other, inverse case would be expensive to detect in will_render,
since it would need to check each parent directory of the file to see
if the directory is really a conflicting file. But prep_writefile
already does a similar scan for symlinks in the path, so I added code
there to remove the conflicting file. This fix assumes that the file
is written using writefile, and not some other means (but using other means
would be a security hole too, so hopefully nothing does).
Renamed usershort => nickname.
Note that this means existing user login sessions will not have the nickname
recorded, and so it won't be used for those.
There was some confusion about whether the filename was
relative to srcdir or not. Some test cases, and the bzr
plugin assumed it was relative to the srcdir. Most everything else
assumed it was absolute.
Changed it to relative, for consistency with the rest
of the rcs_ functions.
Using named parameters for these is overdue. Passing the session in a
parameter instead of passing username and IP separately will later allow
storing other session info, like username or part of the email.
Note that these functions are not part of the exported API,
and the prototype change will catch (most) skew, so I am not changing
API versions. Any third-party plugins that call them will need updated
though.
Now the git plugin supports commits with author fields that look like:
Author: http://my.openid/ <me@web>
Then in recentchanges, the short username will be displayed, linking
to the openid.
Particularly useful for the horrible google openids, of course.
A short story:
Once there was a unicode string, let's call him Srcdir.
Along came a crufy old File::Find, who went through a tree and pasted each
of the leaves in turn onto Srcdir. But this 90's relic didn't decode the
leaves -- despite some of them using unicode! Poor Srcdir, with these
leaves stuck on him, tainted them with his nice unicode-ness. They didn't
look like leaves at all, but instead garbage.
In other words, perl's unicode support sucks mightily, and drives
us all to drink and bad storytelling. But we knew that..
So, srcdir is not normally flagged as unicode, because typically it's pure
ascii. And in that case, things work ok; File::Find finds filenames, which
are not yet decoded to unicode, and appends them to the srcdir, and then
decode_utf8 happily converts the whole thing.
But, if the srcdir does contain utf8 characters, that breaks. Or, if a Yaml
setup file is used, Yaml::Syck's implicitunicode sets the unicode flag of
*all* strings, even those containing only ascii. In either case, srcdir
has the unicode flag set; a non-decoded filename is appended, and
decode_utf8 sees the flag and does *nothing*. The result is that the
filename is not decoded, so looks valid and gets skipped.
File::Find only sticks the directory and filenames together in no_chdir
mode .. but we need that mode for security. In order to retain the
security, and avoid the problem, I made it not pass srcdir to File::Find.
Instead, chdir to the srcdir, and pass ".". Since "." is ascii, the problem
is avoided.
Note that it takes care to chdir back to the starting location. Because
the user may have specified relative paths and so staying in the srcdir
might break. A relative path could even be specifed for an underlay dir, so
it chdirs back after each.
The bug here was that disabling a plugin included thru goodstuff, like
htmlscrubber, caused it to be added to disable_plugins, and those plugins
were never loaded, so could not be re-enabled. Fix by allowing them to be
force loaded when appropriate. (Also that allows disabled plugins to still
record their setup options when dumping a setup file.)
* calendar: Shorten day names, and improve styling of month calendar.
* style.css: Reduced sidebar width back to 20ex from 30; the month calendar
will now fit in the smaller width, and 30 was feeling too large.
The key is using width: auto; overflow: auto; -- this allows the div(s) to the
left of the floating sidebar to be resized to fit next to it, and prevents
any clear: both from pushing the div down below the end of the sidebar.
Many thanks for the Hurd wiki's developers for originally figuring this out.
The edit page recently developed the same problem with its textarea, now
that a sidebar can appear on that page too. In editpage.tmpl I needed to
add a new div around the editcontent textarea, as the above styles cannot
be applied directly to textareas. The textarea's own width is reduced to
98% because at least in chromium this avoids it getting unnecessary
horizonatl scrollbars when a sidebar is displayed next to it.
http://bzed.de/posts/2010/05/new_css_for_bzed.de/
smcv: [10:59:01] is the logical thing you want a <div> whose meaning is "the bits the sidebar is allowed to accompany"?
bzed: [10:59:14] yeah
bzed: [10:59:58] then you could just ensure that this part is as high as the sidebar
smcv: [11:02:44] wrapping a <div> around the sidebar, content and comments seems like the way forward, then
The linktype check was being done on the relativised link target,
but %typedlinks uses the same link targets as %links, so that didn't work.
I think the bug only appeared when tagbase was not set.
This bugfix also let me factor out the common typedlink checking code.
To match calendars, which use local time. Particularly important at
the end of the month.
I checked the history, and there seemed no good rationalle for the
pagespecs to use gmtime.
Problem is that by the time rendering calls render_dependent, %pagesources
has had deleted files removed from it. So match_comment's lookup of
files in there to see if they had the _comment extension failed.
I had to introduce a hash that temporarily holds filenames of deleted pages
to fix this.
Note that unlike comment(), internal() had avoided this pitfall by being
defined to match both internal and non-internal pages.
* openid: Incorporated a fancy openid-selector signin form.
(http://code.google.com/p/openid-selector/)
* openid: Use "openid_identifier" as the form field, as required
by OpenID Authentication v2.0 spec.
test isinternal first, because match_glob with internal => 1 also returns
non-internal pages that match. This order should also be faster.
Remove test to see if pagesources is set. isinternal will not succeed if it
is not.
* comments: Comments pending moderation are now stored in the srcdir
alongside accepted comments, but with a `._comment_pending` extension.
* This allows easier byhand moderation, as the "_pending" need
only be stripped off and the comment be committed to version control.
* The `comment_pending()` pagespec can be used to match such unmoderated
comments, which makes it easy to add a feed of them, or a counter
indicating how many there are.
* Belatedly added a `comment()` pagespec.
Turns out that users with a modified page.tmpl need to modify it on
upgrade, at least to add the FORCEBASEURL (so edit preview works),
so there is no point in trying to retain compatability.
* Removed misc.tmpl. Now to theme ikiwiki, you only need to customise
a single template, page.tmpl.
* misc.tmpl will, however, still be read if a locally modified version
exists. This is to avoid forcing users to update page.tmpl right now.
This is a first pass, it avoids needing to change style.css
except where it refers to tag types.
This goes a bit off the rails at the pageheader with its nested header.
Semantically, there should be an article around the whole page
header, content, and footer. Just as there will be an article around a
whole comment or inlined page header, content, and footer.
But that will mean changing the css that currently refers to pageheader to
refer to the enclosing article instead.
* Ikiwiki can be configured to generate html5 instead of the default xhtml
1.0. The html5 output mode is experimental, not yet fully standards
compliant, and will be subject to rapid change.
Needed to handle the move of the .js files into ikiwiki/, but also this is
a longstanding bug.
Old pagemtime is not remembered in rebuild mode, and changing that would
need a lot of changes. So instead, loop on pagectime, which is remembered.
Change to remembering old pagesources info in rebuild mode. This seems safe
enough.
This is a slow implementation; it runs svn log once per file
still, rather than running svn log once on the whole srcdir.
I did it this way because in my experience, svn log, run on a directory,
does not always list every change to files inside that directory.
I don't know why, and I use svn as little as possible these days.
* Automatically run --gettime the first time ikiwiki is run on
a given srcdir.
* Optimise --gettime for git, so it's appropriatly screamingly
fast. (This could be done for other backends too.)
* However, --gettime for git no longer follows renames.
* Use above to fix up timestamps on docwiki, as well as ensure that
timestamps on basewiki files shipped in the deb are sane.
* Rename --getctime to --gettime. (The old name still works for
backwards compatability.)
* --gettime now also looks up last modification time.
* Add rcs_getmtime to plugin API; currently only implemented
for git.
Joey Hess
Joey Hess