rob
/
gtr
1
1
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity

added version of jure's code to adapt for capacative touch

master
Rob Canning 2022-08-30 23:52:37 +02:00
parent a5a1ca1525
commit e01e4ed32a
14 changed files with 2384 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
README.md
View File

@ -1,3 +1,25 @@
# gtr # gtr
augmented guitar with esp32 and mpu6050 augmented guitar with esp32 and mpu6050
## deps
last working version of esp32 arduino with current hardware is :
- https://github.com/espressif/arduino-esp32/releases/tag/2.0.0
### branch of wavey wind
the nodejs glue
- https://git.kompot.si/g1smo/wavey-wind/src/branch/rob
### the esp32 firmware
- https://git.kompot.si/g1smo/pifcamp-2021/src/branch/master/osc32final

156
osc32final/OSCBoards.h 100644
View File

@ -0,0 +1,156 @@
/*
Written by Yotam Mann, The Center for New Music and Audio Technologies,
University of California, Berkeley. Copyright (c) 2013, The Regents of
the University of California (Regents).
Permission to use, copy, modify, distribute, and distribute modified versions
of this software and its documentation without fee and without a signed
licensing agreement, is hereby granted, provided that the above copyright
notice, this paragraph and the following two paragraphs appear in all copies,
modifications, and distributions.
IN NO EVENT SHALL REGENTS BE LIABLE TO ANY PARTY FOR DIRECT, INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, INCLUDING LOST PROFITS, ARISING
OUT OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF REGENTS HAS
BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
REGENTS SPECIFICALLY DISCLAIMS ANY WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE SOFTWARE AND ACCOMPANYING DOCUMENTATION, IF ANY, PROVIDED
HEREUNDER IS PROVIDED "AS IS". REGENTS HAS NO OBLIGATION TO PROVIDE
MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
For bug reports and feature requests please email me at yotam@cnmat.berkeley.edu
*/
#ifndef OSCDATA_h
#define OSCDATA_h
#include "Arduino.h"
#include <stdlib.h>
#include <stdint.h>
#include <inttypes.h>
#include <string.h>
#include "OSCTiming.h"
#if (defined(TEENSYDUINO) && defined(USB_SERIAL)) || (!defined(TEENSYDUINO) && defined(__AVR_ATmega32U4__)) || defined(__SAM3X8E__) || (defined(_USB) && defined(_USE_USB_FOR_SERIAL_)) || defined(BOARD_maple_mini)
#define BOARD_HAS_USB_SERIAL
#if defined(__SAM3X8E__)
#define thisBoardsSerialUSB SerialUSB
#else
#define thisBoardsSerialUSB Serial
#endif
#endif
#if defined(ESP8266) || defined(ESP32)
#define ESPxx
#endif
//ERRORS/////////////////////////////////////////////////
typedef enum { OSC_OK = 0,
BUFFER_FULL, INVALID_OSC, ALLOCFAILED, INDEX_OUT_OF_BOUNDS
} OSCErrorCode;
class OSCData
{
private:
//friends
friend class OSCMessage;
//should only be used while decoding
//leaves an invalid OSCMessage with a type, but no data
OSCData(char t);
public:
//an error flag
OSCErrorCode error;
//the size (in bytes) of the data
int bytes;
//the type of the data
int type;
//the data
union {
char * s; //string
int32_t i; //int
float f; //float
double d; //double
uint64_t l; //long
uint8_t * b; //blob
osctime_t time;
} data;
//overload the constructor to account for all the types and sizes
OSCData(const char * s);
#if defined(__SAM3X8E__)
OSCData (int16_t);
#endif
OSCData (int32_t);
#ifndef ESPxx
OSCData (int);
#endif
OSCData (unsigned int);
OSCData (float);
OSCData (double);
OSCData (uint8_t *, int);
//accepts another OSCData objects and clones it
OSCData (OSCData *);
OSCData (boolean);
OSCData (osctime_t);
//destructor
~OSCData();
//GETTERS
int32_t getInt();
float getFloat();
double getDouble();
int getString(char *);
int getString(char *, int);
int getString(char *, int, int, int);
int getBlob(uint8_t *);
int getBlob(uint8_t *, int);
int getBlob(uint8_t *, int, int, int);
int getBlobLength();
bool getBoolean();
osctime_t getTime();
//constructor from byte array with type and length
OSCData(char, uint8_t *, int);
//fill the passed in buffer with the data
//uint8_t * asByteArray();
};
/*
based on http://stackoverflow.com/questions/809902/64-bit-ntohl-in-c
if the system is little endian, it will flip the bits
if the system is big endian, it'll do nothing
*/
template<typename T>
static inline T BigEndian(const T& x)
{
const int one = 1;
const char sig = *(char*)&one;
if (sig == 0) return x; // for big endian machine just return the input
T ret;
int size = sizeof(T);
char* src = (char*)&x + sizeof(T) - 1;
char* dst = (char*)&ret;
while (size-- > 0){
*dst++ = *src--;
}
return ret;
}
#endif

181
osc32final/SLIPEncodedBluetoothSerial.cpp 100644
View File

@ -0,0 +1,181 @@
#include "SLIPEncodedBluetoothSerial.h"
#include "BluetoothSerial.h"
/*
CONSTRUCTOR
*/
//instantiate with the tranmission layer
//use BluetoothSerial
SLIPEncodedBluetoothSerial::SLIPEncodedBluetoothSerial(BluetoothSerial &s){
serial = &s;
rstate = CHAR;
}
static const uint8_t eot = 0300;
static const uint8_t slipesc = 0333;
static const uint8_t slipescend = 0334;
static const uint8_t slipescesc = 0335;
/*
SERIAL METHODS
*/
bool SLIPEncodedBluetoothSerial::endofPacket()
{
if(rstate == SECONDEOT)
{
rstate = CHAR;
return true;
}
if (rstate==FIRSTEOT)
{
if(serial->available())
{
uint8_t c =serial->peek();
if(c==eot)
{
serial->read(); // throw it on the floor
}
}
rstate = CHAR;
return true;
}
return false;
}
int SLIPEncodedBluetoothSerial::available(){
back:
int cnt = serial->available();
if(cnt==0)
return 0;
if(rstate==CHAR)
{
uint8_t c =serial->peek();
if(c==slipesc)
{
rstate = SLIPESC;
serial->read(); // throw it on the floor
goto back;
}
else if( c==eot)
{
rstate = FIRSTEOT;
serial->read(); // throw it on the floor
goto back;
}
return 1; // we may have more but this is the only sure bet
}
else if(rstate==SLIPESC)
return 1;
else if(rstate==FIRSTEOT)
{
if(serial->peek()==eot)
{
rstate = SECONDEOT;
serial->read(); // throw it on the floor
return 0;
}
rstate = CHAR;
}else if (rstate==SECONDEOT) {
rstate = CHAR;
}
return 0;
}
//reads a byte from the buffer
int SLIPEncodedBluetoothSerial::read(){
back:
uint8_t c = serial->read();
if(rstate==CHAR)
{
if(c==slipesc)
{
rstate=SLIPESC;
goto back;
}
else if(c==eot){
return -1; // xxx this is an error
}
return c;
}
else
if(rstate==SLIPESC)
{
rstate=CHAR;
if(c==slipescend)
return eot;
else if(c==slipescesc)
return slipesc;
else {
// insert some error code here
return -1;
}
}
else
return -1;
}
// as close as we can get to correct behavior
int SLIPEncodedBluetoothSerial::peek(){
uint8_t c = serial->peek();
if(rstate==SLIPESC)
{
if(c==slipescend)
return eot;
else if(c==slipescesc)
return slipesc;
}
return c;
}
//the arduino and wiring libraries have different return types for the write function
#if defined(WIRING) || defined(BOARD_DEFS_H)
//encode SLIP
void SLIPEncodedBluetoothSerial::write(uint8_t b){
if(b == eot){
serial->write(slipesc);
return serial->write(slipescend);
} else if(b==slipesc) {
serial->write(slipesc);
return serial->write(slipescesc);
} else {
return serial->write(b);
}
}
void SLIPEncodedBluetoothSerial::write(const uint8_t *buffer, size_t size) { while(size--) write(*buffer++); }
#else
//encode SLIP
size_t SLIPEncodedBluetoothSerial::write(uint8_t b){
if(b == eot){
serial->write(slipesc);
return serial->write(slipescend);
} else if(b==slipesc) {
serial->write(slipesc);
return serial->write(slipescesc);
} else {
return serial->write(b);
}
}
size_t SLIPEncodedBluetoothSerial::write(const uint8_t *buffer, size_t size) { size_t result=0; while(size--) result = write(*buffer++); return result; }
#endif
void SLIPEncodedBluetoothSerial::begin(String name){
serial->begin(name);
}
//SLIP specific method which begins a transmitted packet
void SLIPEncodedBluetoothSerial::beginPacket() { serial->write(eot); }
//signify the end of the packet with an EOT
void SLIPEncodedBluetoothSerial::endPacket(){
serial->write(eot);
}
void SLIPEncodedBluetoothSerial::flush(){
serial->flush();
}

62
osc32final/SLIPEncodedBluetoothSerial.h 100644
View File

@ -0,0 +1,62 @@
/*
Extends the Serial class to encode SLIP over serial
*/
#ifndef SLIPEncodedBluetoothSerial_h
#define SLIPEncodedBluetoothSerial_h
#include "Arduino.h"
#include <Stream.h>
#include "BluetoothSerial.h"
class SLIPEncodedBluetoothSerial: public Stream{
private:
enum erstate {CHAR, FIRSTEOT, SECONDEOT, SLIPESC } rstate;
//the serial port used
BluetoothSerial * serial;
public:
//the serial port used
SLIPEncodedBluetoothSerial(BluetoothSerial & );
int available();
int read();
int peek();
void flush();
//same as Serial.begin
void begin(String);
//SLIP specific method which begins a transmitted packet
void beginPacket();
//SLIP specific method which ends a transmittedpacket
void endPacket();
// SLIP specific method which indicates that an EOT was received
bool endofPacket();
//the arduino and wiring libraries have different return types for the write function
#if defined(WIRING) || defined(BOARD_DEFS_H)
void write(uint8_t b);
void write(const uint8_t *buffer, size_t size);
#else
//overrides the Stream's write function to encode SLIP
size_t write(uint8_t b);
size_t write(const uint8_t *buffer, size_t size);
//using Print::write;
#endif
};
#endif

393
osc32final/osc32final.ino 100644
View File

@ -0,0 +1,393 @@
// ESP32 Dev Module
#include "Wire.h"
#include "MPU6050_6Axis_MotionApps20.h"
#include <OSCBundle.h>
#include <OSCBoards.h>
// POSITION CALCULATION
#include <BasicLinearAlgebra.h>
#include "math.h"
using namespace BLA;
#define SERIAL_OSC
//#define WIFI_OSC
#define BT_OSC
#define OUTPUT_READABLE_WORLDACCEL
// SERIAL
#ifdef BOARD_HAS_USB_SERIAL
#include <SLIPEncodedUSBSerial.h>
SLIPEncodedUSBSerial SLIPSerial( thisBoardsSerialUSB );
#else
#include <SLIPEncodedSerial.h>
SLIPEncodedSerial SLIPSerial(Serial); // Change to Serial1 or Serial2 etc. for boards with multiple serial ports that don’t have Serial
#endif
// WIFI
#ifdef WIFI_OSC
#include <WiFi.h>
const char* ssid = "Grajski"; // your network SSID (name of wifi network)
const char* password = "nedeladanes"; // your network password
// Multicast IP / port
const IPAddress castIp = IPAddress(224,0,1,9);
const int port = 6696;
bool connected = false;
#include <WiFiUdp.h>
WiFiUDP udp;
void connectToWiFi(const char * ssid, const char * pwd){
Serial.println("Connecting to WiFi network: " + String(ssid));
// delete old config
WiFi.disconnect(true);
//register event handler
WiFi.onEvent(WiFiEvent);
//Initiate connection
WiFi.begin(ssid, pwd);
Serial.println("Waiting for WIFI connection...");
}
//wifi event handler
void WiFiEvent(WiFiEvent_t event){
switch(event) {
case ARDUINO_EVENT_WIFI_STA_GOT_IP:
//When connected set
Serial.print("WiFi connected! IP address: ");
Serial.println(WiFi.localIP());
//initializes the UDP state
//This initializes the transfer buffer
udp.begin(WiFi.localIP(), port);
connected = true;
break;
case ARDUINO_EVENT_WIFI_STA_DISCONNECTED:
connected = false;
Serial.println("\n\n\n================\nLOST WIFI CONNECTION!\n\n\nTrying again soon...\n\n\n");
delay(1000);
connectToWiFi(ssid, password);
break;
default: break;
}
}
#endif
// Bluetooth
#ifdef BT_OSC
#if !defined(CONFIG_BT_ENABLED) || !defined(CONFIG_BLUEDROID_ENABLED)
#error Bluetooth is not enabled! Please run `make menuconfig` to and enable it
#endif
#include <SLIPEncodedSerial.h>
#include "BluetoothSerial.h"
#include "SLIPEncodedBluetoothSerial.h"
BluetoothSerial SerialBT;
SLIPEncodedBluetoothSerial SLIPBTSerial(SerialBT);
#endif
// Motion sensor object
MPU6050 mpu;
// MPU control/status vars
bool dmpReady = false; // set true if DMP init was successful
uint8_t mpuIntStatus; // holds actual interrupt status byte from MPU
uint8_t devStatus; // return status after each device operation (0 = success, !0 = error)
uint16_t packetSize; // expected DMP packet size (default is 42 bytes)
uint16_t fifoCount; // count of all bytes currently in FIFO
uint8_t fifoBuffer[64]; // FIFO storage buffer
// orientation/motion vars
Quaternion q; // [w, x, y, z] quaternion container
Quaternion pq; // [w, x, y, z] previous quaternion container
Quaternion diff; // [w, x, y, z] quaternion derivate container
Quaternion cq; // [w, x, y, z] calibration quaternion
VectorInt16 aa; // [x, y, z] accel sensor measurements
VectorInt16 gy; // [x, y, z] gyro sensor measurements
VectorInt16 aaReal; // [x, y, z] gravity-free accel sensor measurements
VectorInt16 aaWorld; // [x, y, z] world-frame accel sensor measurements
VectorFloat gravity; // [x, y, z] gravity vector
float euler[3]; // [psi, theta, phi] Euler angle container
float ypr[3]; // [yaw, pitch, roll] yaw/pitch/roll container and gravity vector
uint32_t timeOn = 0; // Uptime counter for movement calculation
Matrix<3> position; // [x,y,z] tracks position of device
Matrix<3> speed; // [x,y,z] tracks speed of device
Matrix<3> eulerVector;
Matrix<3> eulerDiffVector;
bool reset; // For quaternion calibration
// Sem dobimo vrednosti pospeskomerja in ziroskopa
int16_t AcX,AcY,AcZ;
float GyX, GyY, GyZ;
// Keys
byte keys[] = {16, 17, 5, 18};
byte pressed[] = {0, 0, 0, 0};
byte KEYLEN = 4;
BLA::Matrix<3> eulerFromQuaternion(Quaternion q) {
float x2 = q.x + q.x; float y2 = q.y + q.y; float z2 = q.z + q.z;
float xx = q.x * x2; float xy = q.x * y2; float xz = q.x * z2;
float yy = q.y * y2; float yz = q.y * z2; float zz = q.z * z2;
float wx = q.w * x2; float wy = q.w * y2; float wz = q.w * z2;
BLA::Matrix<4,4> rotationMatrix = {
1 - (yy + zz), xy + wz, xz - wy, 0,
xy - wz, 1 - ( xx + zz ), yz + wx, 0,
xz + wy, yz - wx, 1 - ( xx + yy ), 0,
0, 0, 0, 1
};
//TODO: test whether BLA library uses column-major matrix notation in code
BLA::Matrix<3> eulerVector;
eulerVector.Fill(0);
eulerVector(1) = asin(clamp(rotationMatrix(1,3),-1,1));
if (fabsf(rotationMatrix(1,3)) < 0.9999999) {
eulerVector(0) = atan2f(-rotationMatrix(2,3), rotationMatrix(3,3));
eulerVector(2) = atan2f( -rotationMatrix(1,2), rotationMatrix(1,1));
} else {
eulerVector(0) = atan2f(rotationMatrix(3,2), rotationMatrix(2,2));
eulerVector(2) = 0;
}
return eulerVector;
}
float clamp(float value,float min,float max) {
return fmaxf( min, fminf(max, value));
}
/* OSC MSG channels */
OSCBundle bundle;
void setup() {
// Basic(debug) serial init
Serial.begin(115200); // set this as high as you can reliably run on your platform
Serial.println("Starting up...");
// I2C init
Wire.begin();
Wire.setClock(400000); // 400kHz I2C clock. Comment this line if having compilation difficulties
#ifdef SERIAL_OSC
SLIPSerial.begin(115200); // set this as high as you can reliably run on your platform
#endif
// Keys
for(int i = 0; i < KEYLEN; i++) {
pinMode(keys[i], INPUT_PULLUP);
}
// Position and speed tracking
timeOn = 0;
position.Fill(0);
speed.Fill(0);
Serial.println("MPU will init...");
// Start MPU
mpu.initialize();
Serial.println("MPU did init... 1");
// Set sensitivity / range
mpu.setFullScaleGyroRange(MPU6050_GYRO_FS_250);
mpu.setFullScaleAccelRange(MPU6050_ACCEL_FS_2);
Serial.println("Ranges set... 2");
// DMP init
devStatus = mpu.dmpInitialize();
Serial.println("DMP did init... 3");
// supply your own gyro offsets here, scaled for min sensitivity
// !!! Run Zero IMU to get readings (read comments for instructions)
/* First proto (right hand, black&blue)*/
mpu.setXGyroOffset(76);
mpu.setYGyroOffset(68);
mpu.setZGyroOffset(10);
mpu.setXAccelOffset(-3527);
mpu.setYAccelOffset(-913);
mpu.setZAccelOffset(1027);
/* Second proto, translucent / white
mpu.setXGyroOffset(-3650);
mpu.setYGyroOffset(-2531);
mpu.setZGyroOffset(1131);
mpu.setXAccelOffset(162);
mpu.setYAccelOffset(-16);
mpu.setZAccelOffset(-12);
*/
Serial.println("DMP Init all good?");
// make sure it worked (returns 0 if so)
if (devStatus == 0) {
// Calibration Time: generate offsets and calibrate our MPU6050
mpu.CalibrateAccel(6);
mpu.CalibrateGyro(6);
//Serial.println();
//mpu.PrintActiveOffsets();
// turn on the DMP, now that it's ready
//Serial.println(F("Enabling DMP..."));
mpu.setDMPEnabled(true);
// set our DMP Ready flag so the main loop() function knows it's okay to use it
//Serial.println(F("DMP ready! Waiting for first interrupt..."));
dmpReady = true;
// get expected DMP packet size for later comparison
packetSize = mpu.dmpGetFIFOPacketSize();
Serial.println("DMP Initialization good!");
} else {
Serial.println("DMP Initialization failed (code " + String(devStatus) + ")");
// ERROR!
// 1 = initial memory load failed
// 2 = DMP configuration updates failed
// (if it's going to break, usually the code will be 1)
}
#ifdef WIFI_OSC
// WIFI init
Serial.print("Attempting to connect to SSID: ");
Serial.println(ssid);
connectToWiFi(ssid, password);
// attempt to connect to Wifi network:
while (WiFi.status() != WL_CONNECTED) {
Serial.print(".");
// wait 1 second for re-trying
delay(1000);
}
#endif
#ifdef BT_OSC
SerialBT.begin("wavey wind");
#endif
}
void loop() {
// if programming failed, don't try to do anything
if (!dmpReady) return;
// read a packet from FIFO
if (mpu.dmpGetCurrentFIFOPacket(fifoBuffer)) { // Get the Latest packet
// Store last Q value
pq = Quaternion(q.w,q.x,q.y,q.z);
// get quaternion values in easy matrix form: w x y z
mpu.dmpGetQuaternion(&q, fifoBuffer);
q = q.getProduct(cq);
//compute the differential rotation between the previous and new orientation
diff = q.getProduct(pq.getConjugate());
// Quaternion - rotacija
bundle.add("/quaternion").add(q.w).add(q.y * -1).add(q.z).add(q.x * -1); // W X Y Z
// Euler - rotacija
//eulerVector = eulerFromQuaternion(q);
//bundle.add("/euler").add(eulerVector(0)).add(eulerVector(1)).add(eulerVector(2)); // X Y Z
// Quaterion difference - rotacijska razlika (prejsnji reading - trenutni reading)
bundle.add("/quaternionDiff").add(diff.w).add(diff.y * -1).add(diff.z).add(diff.x * -1); // W X Y Z
// Rotation diff value in euler angle
//eulerDiffVector = eulerFromQuaternion(diff);
//bundle.add("/eulerDiff").add(eulerDiffVector(0)).add(eulerDiffVector(1)).add(eulerDiffVector(2)); // X Y Z
#ifdef OUTPUT_READABLE_REALACCEL
// display real acceleration, adjusted to remove gravity
mpu.dmpGetAccel(&aa, fifoBuffer);
mpu.dmpGetGravity(&gravity, &q);
mpu.dmpGetLinearAccel(&aaReal, &aa, &gravity);
AcX = aaReal.x;
AcY = aaReal.y;
AcZ = aaReal.z;
#endif
#ifdef OUTPUT_READABLE_WORLDACCEL
// display initial world-frame acceleration, adjusted to remove gravity
// and rotated based on known orientation from quaternion
mpu.dmpGetAccel(&aa, fifoBuffer);
mpu.dmpGetGravity(&gravity, &q);
mpu.dmpGetLinearAccel(&aaReal, &aa, &gravity);
mpu.dmpGetLinearAccelInWorld(&aaWorld, &aaReal, &q);
AcX = aaWorld.x;
AcY = aaWorld.y;
AcZ = aaWorld.z;
#endif
// Calculate speed and position from accelerometer data
/*
int prevTime = timeOn;
timeOn = millis();
int elapsedTime = timeOn - prevTime;
Matrix<3> speedGain = {AcX * elapsedTime, AcY * elapsedTime, AcZ * elapsedTime};
//Assume linear acceleration over measured time window, multiply time by halfpoint between last-known and current speed
position = position + (((speed + speedGain) + speed) /2 * elapsedTime);
speed += speedGain;
bundle.add("/position/").add(position(0)).add(position(1)).add(position(2));
bundle.add("/speed/").add(speed(0)).add(speed(1)).add(speed(2));
*/
// Accelerometer
bundle.add("/accel").add(AcX).add(AcY).add(AcZ); ; // X Y Z
// Keys held down
bundle.add("/keys"); // A B C D E
// Send keys
for(int i = 0; i < KEYLEN; i++) {
pressed[i] = !digitalRead(keys[i]);
bundle.getOSCMessage("/keys")->add(pressed[i]);
}
// Reset calibration euler?
if (pressed[0] && pressed[1] && pressed[2] && pressed[3]) {
if (!reset) {
cq = q.getConjugate();
reset = true;
Serial.println("Quaternion calibrate");
}
} else {
if (reset) {
reset = false;
}
}
#ifdef SERIAL_OSC
SLIPSerial.beginPacket();
bundle.send(SLIPSerial);
SLIPSerial.endPacket();
#endif
#ifdef WIFI_OSC
udp.beginPacket(castIp, port);
bundle.send(udp);
udp.endPacket();
#endif
// Some bug below, it seems
#ifdef BT_OSC
SLIPBTSerial.beginPacket();
bundle.send(SLIPBTSerial);
SLIPBTSerial.endPacket();
#endif
bundle.empty();
}
}

295
osc32final/osc32final.ino_rc 100644
View File

@ -0,0 +1,295 @@
// ESP32 Dev Module
#include "Wire.h"
#include "MPU6050_6Axis_MotionApps20.h"
#include <OSCBundle.h>
#include <OSCBoards.h>
#define SERIAL_OSC
//#define WIFI_OSC
#define BT_OSC
#define OUTPUT_READABLE_WORLDACCEL
// SERIAL
#ifdef BOARD_HAS_USB_SERIAL
#include <SLIPEncodedUSBSerial.h>
SLIPEncodedUSBSerial SLIPSerial( thisBoardsSerialUSB );
#else
#include <SLIPEncodedSerial.h>
SLIPEncodedSerial SLIPSerial(Serial); // Change to Serial1 or Serial2 etc. for boards with multiple serial ports that don’t have Serial
#endif
// WIFI
#ifdef WIFI_OSC
#include <WiFi.h>
const char* ssid = "Grajski"; // your network SSID (name of wifi network)
const char* password = "nedeladanes"; // your network password
// Multicast IP / port
const IPAddress castIp = IPAddress(224,0,1,9);
const int port = 6696;
bool connected = false;
#include <WiFiUdp.h>
WiFiUDP udp;
void connectToWiFi(const char * ssid, const char * pwd){
Serial.println("Connecting to WiFi network: " + String(ssid));
// delete old config
WiFi.disconnect(true);
//register event handler
WiFi.onEvent(WiFiEvent);
//Initiate connection
WiFi.begin(ssid, pwd);
Serial.println("Waiting for WIFI connection...");
}
//wifi event handler
void WiFiEvent(WiFiEvent_t event){
switch(event) {
case ARDUINO_EVENT_WIFI_STA_GOT_IP:
//When connected set
Serial.print("WiFi connected! IP address: ");
Serial.println(WiFi.localIP());
//initializes the UDP state
//This initializes the transfer buffer
udp.begin(WiFi.localIP(), port);
connected = true;
break;
case ARDUINO_EVENT_WIFI_STA_DISCONNECTED:
connected = false;
Serial.println("\n\n\n================\nLOST WIFI CONNECTION!\n\n\nTrying again soon...\n\n\n");
delay(1000);
connectToWiFi(ssid, password);
break;
default: break;
}
}
#endif
// Bluetooth
#ifdef BT_OSC
#if !defined(CONFIG_BT_ENABLED) || !defined(CONFIG_BLUEDROID_ENABLED)
#error Bluetooth is not enabled! Please run `make menuconfig` to and enable it
#endif
#include <SLIPEncodedSerial.h>
#include "BluetoothSerial.h"
#include "SLIPEncodedBluetoothSerial.h"
BluetoothSerial SerialBT;
SLIPEncodedBluetoothSerial SLIPBTSerial(SerialBT);
#endif
// Motion sensor object
MPU6050 mpu;
// MPU control/status vars
bool dmpReady = false; // set true if DMP init was successful
uint8_t mpuIntStatus; // holds actual interrupt status byte from MPU
uint8_t devStatus; // return status after each device operation (0 = success, !0 = error)
uint16_t packetSize; // expected DMP packet size (default is 42 bytes)
uint16_t fifoCount; // count of all bytes currently in FIFO
uint8_t fifoBuffer[64]; // FIFO storage buffer
// orientation/motion vars
Quaternion q; // [w, x, y, z] quaternion container
Quaternion pq; // [w, x, y, z] previous quaternion container
Quaternion diff; // [w, x, y, z] quaternion derivate container
VectorInt16 aa; // [x, y, z] accel sensor measurements
VectorInt16 gy; // [x, y, z] gyro sensor measurements
VectorInt16 aaReal; // [x, y, z] gravity-free accel sensor measurements
VectorInt16 aaWorld; // [x, y, z] world-frame accel sensor measurements
VectorFloat gravity; // [x, y, z] gravity vector
float euler[3]; // [psi, theta, phi] Euler angle container
float ypr[3]; // [yaw, pitch, roll] yaw/pitch/roll container and gravity vector
// Sem dobimo vrednosti pospeskomerja in ziroskopa
int16_t AcX,AcY,AcZ;
float GyX, GyY, GyZ;
// Keys
byte keys[] = {16, 17, 5, 18};
byte pressed[] = {0, 0, 0, 0};
byte KEYLEN = 4;
/* OSC MSG channels */
OSCBundle bundle;
void setup() {
// Basic(debug) serial init
// Serial.begin(115200); // set this as high as you can reliably run on your platform
Serial.println("Starting up...");
// I2C init
Wire.begin();
Wire.setClock(400000); // 400kHz I2C clock. Comment this line if having compilation difficulties
#ifdef SERIAL_OSC
SLIPSerial.begin(115200); // set this as high as you can reliably run on your platform
#endif
// Keys
for(int i = 0; i < KEYLEN; i++) {
pinMode(keys[i], INPUT_PULLUP);
}
// Start MPU
mpu.initialize();
// Set sensitivity / range
mpu.setFullScaleGyroRange(MPU6050_GYRO_FS_250);
mpu.setFullScaleAccelRange(MPU6050_ACCEL_FS_2);
// DMP init
devStatus = mpu.dmpInitialize();
// supply your own gyro offsets here, scaled for min sensitivity
// !!! Run Zero IMU to get readings (read comments for instructions)
/* First proto (right hand, black&blue)*/
mpu.setXGyroOffset(76);
mpu.setYGyroOffset(68);
mpu.setZGyroOffset(10);
mpu.setXAccelOffset(-3527);
mpu.setYAccelOffset(-913);
mpu.setZAccelOffset(1027);
/* Second proto, translucent / white
mpu.setXGyroOffset(-3650);
mpu.setYGyroOffset(-2531);
mpu.setZGyroOffset(1131);
mpu.setXAccelOffset(162);
mpu.setYAccelOffset(-16);
mpu.setZAccelOffset(-12);
*/
// make sure it worked (returns 0 if so)
if (devStatus == 0) {
// Calibration Time: generate offsets and calibrate our MPU6050
mpu.CalibrateAccel(6);
mpu.CalibrateGyro(6);
//Serial.println();
//mpu.PrintActiveOffsets();
// turn on the DMP, now that it's ready
//Serial.println(F("Enabling DMP..."));
mpu.setDMPEnabled(true);
// set our DMP Ready flag so the main loop() function knows it's okay to use it
//Serial.println(F("DMP ready! Waiting for first interrupt..."));
dmpReady = true;
// get expected DMP packet size for later comparison
packetSize = mpu.dmpGetFIFOPacketSize();
} else {
Serial.println("DMP Initialization failed (code " + String(devStatus) + ")");
// ERROR!
// 1 = initial memory load failed
// 2 = DMP configuration updates failed
// (if it's going to break, usually the code will be 1)
}
#ifdef WIFI_OSC
// WIFI init
Serial.print("Attempting to connect to SSID: ");
Serial.println(ssid);
connectToWiFi(ssid, password);
// attempt to connect to Wifi network:
while (WiFi.status() != WL_CONNECTED) {
Serial.print(".");
// wait 1 second for re-trying
delay(1000);
}
#endif
#ifdef BT_OSC
SerialBT.begin("wavey wind");
#endif
}
void loop() {
// if programming failed, don't try to do anything
if (!dmpReady) return;
// read a packet from FIFO
if (mpu.dmpGetCurrentFIFOPacket(fifoBuffer)) { // Get the Latest packet
// Store last Q value
pq = Quaternion(q.w,q.x,q.y,q.z);
// get quaternion values in easy matrix form: w x y z
mpu.dmpGetQuaternion(&q, fifoBuffer);
//compute the differential rotation between the previous and new orientation
diff = q.getProduct(pq.getConjugate());
// Quaternion - rotacija
bundle.add("/quaternion").add(q.w).add(q.y * -1).add(q.z).add(q.x * -1); // W X Y Z
// Quaterion difference - rotacijska razlika (prejsnji reading - trenutni reading)
bundle.add("/quaternionDiff").add(diff.w).add(diff.y * -1).add(diff.z).add(diff.x * -1); // W X Y Z
#ifdef OUTPUT_READABLE_REALACCEL
// display real acceleration, adjusted to remove gravity
mpu.dmpGetAccel(&aa, fifoBuffer);
mpu.dmpGetGravity(&gravity, &q);
mpu.dmpGetLinearAccel(&aaReal, &aa, &gravity);
AcX = aaReal.x;
AcY = aaReal.y;
AcZ = aaReal.z;
#endif
#ifdef OUTPUT_READABLE_WORLDACCEL
// display initial world-frame acceleration, adjusted to remove gravity
// and rotated based on known orientation from quaternion
mpu.dmpGetAccel(&aa, fifoBuffer);
mpu.dmpGetGravity(&gravity, &q);
mpu.dmpGetLinearAccel(&aaReal, &aa, &gravity);
mpu.dmpGetLinearAccelInWorld(&aaWorld, &aaReal, &q);
AcX = aaWorld.x;
AcY = aaWorld.y;
AcZ = aaWorld.z;
#endif
// Accelerometer
bundle.add("/accel").add(AcX).add(AcY).add(AcZ); ; // X Y Z
// Keys held down
bundle.add("/keys"); // A B C D E
// Send keys
for(int i = 0; i < KEYLEN; i++) {
pressed[i] = !digitalRead(keys[i]);
bundle.getOSCMessage("/keys")->add(pressed[i]);
}
#ifdef SERIAL_OSC
SLIPSerial.beginPacket();
bundle.send(SLIPSerial);
SLIPSerial.endPacket();
#endif
#ifdef WIFI_OSC
udp.beginPacket(castIp, port);
bundle.send(udp);
udp.endPacket();
#endif
// Some bug below, it seems
#ifdef BT_OSC
SLIPBTSerial.beginPacket();
bundle.send(SLIPBTSerial);
SLIPBTSerial.endPacket();
#endif
bundle.empty();
}
}

661
wavey-wind/LICENSE 100644
View File

@ -0,0 +1,661 @@
GNU AFFERO GENERAL PUBLIC LICENSE
Version 3, 19 November 2007
Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
Everyone is permitted to copy and distribute verbatim copies
of this license document, but changing it is not allowed.
Preamble
The GNU Affero General Public License is a free, copyleft license for
software and other kinds of works, specifically designed to ensure
cooperation with the community in the case of network server software.
The licenses for most software and other practical works are designed
to take away your freedom to share and change the works. By contrast,
our General Public Licenses are intended to guarantee your freedom to
share and change all versions of a program--to make sure it remains free
software for all its users.
When we speak of free software, we are referring to freedom, not
price. Our General Public Licenses are designed to make sure that you
have the freedom to distribute copies of free software (and charge for
them if you wish), that you receive source code or can get it if you
want it, that you can change the software or use pieces of it in new
free programs, and that you know you can do these things.
Developers that use our General Public Licenses protect your rights
with two steps: (1) assert copyright on the software, and (2) offer
you this License which gives you legal permission to copy, distribute
and/or modify the software.
A secondary benefit of defending all users' freedom is that
improvements made in alternate versions of the program, if they
receive widespread use, become available for other developers to
incorporate. Many developers of free software are heartened and
encouraged by the resulting cooperation. However, in the case of
software used on network servers, this result may fail to come about.
The GNU General Public License permits making a modified version and
letting the public access it on a server without ever releasing its
source code to the public.
The GNU Affero General Public License is designed specifically to
ensure that, in such cases, the modified source code becomes available
to the community. It requires the operator of a network server to
provide the source code of the modified version running there to the
users of that server. Therefore, public use of a modified version, on
a publicly accessible server, gives the public access to the source
code of the modified version.
An older license, called the Affero General Public License and
published by Affero, was designed to accomplish similar goals. This is
a different license, not a version of the Affero GPL, but Affero has
released a new version of the Affero GPL which permits relicensing under
this license.
The precise terms and conditions for copying, distribution and
modification follow.
TERMS AND CONDITIONS
0. Definitions.
"This License" refers to version 3 of the GNU Affero General Public License.
"Copyright" also means copyright-like laws that apply to other kinds of
works, such as semiconductor masks.
"The Program" refers to any copyrightable work licensed under this
License. Each licensee is addressed as "you". "Licensees" and
"recipients" may be individuals or organizations.
To "modify" a work means to copy from or adapt all or part of the work
in a fashion requiring copyright permission, other than the making of an
exact copy. The resulting work is called a "modified version" of the
earlier work or a work "based on" the earlier work.
A "covered work" means either the unmodified Program or a work based
on the Program.
To "propagate" a work means to do anything with it that, without
permission, would make you directly or secondarily liable for
infringement under applicable copyright law, except executing it on a
computer or modifying a private copy. Propagation includes copying,
distribution (with or without modification), making available to the
public, and in some countries other activities as well.
To "convey" a work means any kind of propagation that enables other
parties to make or receive copies. Mere interaction with a user through
a computer network, with no transfer of a copy, is not conveying.
An interactive user interface displays "Appropriate Legal Notices"
to the extent that it includes a convenient and prominently visible
feature that (1) displays an appropriate copyright notice, and (2)
tells the user that there is no warranty for the work (except to the
extent that warranties are provided), that licensees may convey the
work under this License, and how to view a copy of this License. If
the interface presents a list of user commands or options, such as a
menu, a prominent item in the list meets this criterion.
1. Source Code.
The "source code" for a work means the preferred form of the work
for making modifications to it. "Object code" means any non-source
form of a work.
A "Standard Interface" means an interface that either is an official
standard defined by a recognized standards body, or, in the case of
interfaces specified for a particular programming language, one that
is widely used among developers working in that language.
The "System Libraries" of an executable work include anything, other
than the work as a whole, that (a) is included in the normal form of
packaging a Major Component, but which is not part of that Major
Component, and (b) serves only to enable use of the work with that
Major Component, or to implement a Standard Interface for which an
implementation is available to the public in source code form. A
"Major Component", in this context, means a major essential component
(kernel, window system, and so on) of the specific operating system
(if any) on which the executable work runs, or a compiler used to
produce the work, or an object code interpreter used to run it.
The "Corresponding Source" for a work in object code form means all
the source code needed to generate, install, and (for an executable
work) run the object code and to modify the work, including scripts to
control those activities. However, it does not include the work's
System Libraries, or general-purpose tools or generally available free
programs which are used unmodified in performing those activities but
which are not part of the work. For example, Corresponding Source
includes interface definition files associated with source files for
the work, and the source code for shared libraries and dynamically
linked subprograms that the work is specifically designed to require,
such as by intimate data communication or control flow between those
subprograms and other parts of the work.
The Corresponding Source need not include anything that users
can regenerate automatically from other parts of the Corresponding
Source.
The Corresponding Source for a work in source code form is that
same work.
2. Basic Permissions.
All rights granted under this License are granted for the term of
copyright on the Program, and are irrevocable provided the stated
conditions are met. This License explicitly affirms your unlimited
permission to run the unmodified Program. The output from running a
covered work is covered by this License only if the output, given its
content, constitutes a covered work. This License acknowledges your
rights of fair use or other equivalent, as provided by copyright law.
You may make, run and propagate covered works that you do not
convey, without conditions so long as your license otherwise remains
in force. You may convey covered works to others for the sole purpose
of having them make modifications exclusively for you, or provide you
with facilities for running those works, provided that you comply with
the terms of this License in conveying all material for which you do
not control copyright. Those thus making or running the covered works
for you must do so exclusively on your behalf, under your direction
and control, on terms that prohibit them from making any copies of
your copyrighted material outside their relationship with you.
Conveying under any other circumstances is permitted solely under
the conditions stated below. Sublicensing is not allowed; section 10
makes it unnecessary.
3. Protecting Users' Legal Rights From Anti-Circumvention Law.
No covered work shall be deemed part of an effective technological
measure under any applicable law fulfilling obligations under article
11 of the WIPO copyright treaty adopted on 20 December 1996, or
similar laws prohibiting or restricting circumvention of such
measures.
When you convey a covered work, you waive any legal power to forbid
circumvention of technological measures to the extent such circumvention
is effected by exercising rights under this License with respect to
the covered work, and you disclaim any intention to limit operation or
modification of the work as a means of enforcing, against the work's
users, your or third parties' legal rights to forbid circumvention of
technological measures.
4. Conveying Verbatim Copies.
You may convey verbatim copies of the Program's source code as you
receive it, in any medium, provided that you conspicuously and
appropriately publish on each copy an appropriate copyright notice;
keep intact all notices stating that this License and any
non-permissive terms added in accord with section 7 apply to the code;
keep intact all notices of the absence of any warranty; and give all
recipients a copy of this License along with the Program.
You may charge any price or no price for each copy that you convey,
and you may offer support or warranty protection for a fee.
5. Conveying Modified Source Versions.
You may convey a work based on the Program, or the modifications to
produce it from the Program, in the form of source code under the
terms of section 4, provided that you also meet all of these conditions:
a) The work must carry prominent notices stating that you modified
it, and giving a relevant date.
b) The work must carry prominent notices stating that it is
released under this License and any conditions added under section
7. This requirement modifies the requirement in section 4 to
"keep intact all notices".
c) You must license the entire work, as a whole, under this
License to anyone who comes into possession of a copy. This
License will therefore apply, along with any applicable section 7
additional terms, to the whole of the work, and all its parts,
regardless of how they are packaged. This License gives no
permission to license the work in any other way, but it does not
invalidate such permission if you have separately received it.
d) If the work has interactive user interfaces, each must display
Appropriate Legal Notices; however, if the Program has interactive
interfaces that do not display Appropriate Legal Notices, your
work need not make them do so.
A compilation of a covered work with other separate and independent
works, which are not by their nature extensions of the covered work,
and which are not combined with it such as to form a larger program,
in or on a volume of a storage or distribution medium, is called an
"aggregate" if the compilation and its resulting copyright are not
used to limit the access or legal rights of the compilation's users
beyond what the individual works permit. Inclusion of a covered work
in an aggregate does not cause this License to apply to the other
parts of the aggregate.
6. Conveying Non-Source Forms.
You may convey a covered work in object code form under the terms
of sections 4 and 5, provided that you also convey the
machine-readable Corresponding Source under the terms of this License,
in one of these ways:
a) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by the
Corresponding Source fixed on a durable physical medium
customarily used for software interchange.
b) Convey the object code in, or embodied in, a physical product
(including a physical distribution medium), accompanied by a
written offer, valid for at least three years and valid for as
long as you offer spare parts or customer support for that product
model, to give anyone who possesses the object code either (1) a
copy of the Corresponding Source for all the software in the
product that is covered by this License, on a durable physical
medium customarily used for software interchange, for a price no
more than your reasonable cost of physically performing this
conveying of source, or (2) access to copy the
Corresponding Source from a network server at no charge.
c) Convey individual copies of the object code with a copy of the
written offer to provide the Corresponding Source. This
alternative is allowed only occasionally and noncommercially, and
only if you received the object code with such an offer, in accord
with subsection 6b.
d) Convey the object code by offering access from a designated
place (gratis or for a charge), and offer equivalent access to the
Corresponding Source in the same way through the same place at no
further charge. You need not require recipients to copy the
Corresponding Source along with the object code. If the place to
copy the object code is a network server, the Corresponding Source
may be on a different server (operated by you or a third party)
that supports equivalent copying facilities, provided you maintain
clear directions next to the object code saying where to find the
Corresponding Source. Regardless of what server hosts the
Corresponding Source, you remain obligated to ensure that it is
available for as long as needed to satisfy these requirements.
e) Convey the object code using peer-to-peer transmission, provided
you inform other peers where the object code and Corresponding
Source of the work are being offered to the general public at no
charge under subsection 6d.
A separable portion of the object code, whose source code is excluded
from the Corresponding Source as a System Library, need not be
included in conveying the object code work.
A "User Product" is either (1) a "consumer product", which means any
tangible personal property which is normally used for personal, family,
or household purposes, or (2) anything designed or sold for incorporation
into a dwelling. In determining whether a product is a consumer product,
doubtful cases shall be resolved in favor of coverage. For a particular
product received by a particular user, "normally used" refers to a
typical or common use of that class of product, regardless of the status
of the particular user or of the way in which the particular user
actually uses, or expects or is expected to use, the product. A product
is a consumer product regardless of whether the product has substantial
commercial, industrial or non-consumer uses, unless such uses represent
the only significant mode of use of the product.
"Installation Information" for a User Product means any methods,
procedures, authorization keys, or other information required to install
and execute modified versions of a covered work in that User Product from
a modified version of its Corresponding Source. The information must
suffice to ensure that the continued functioning of the modified object
code is in no case prevented or interfered with solely because
modification has been made.
If you convey an object code work under this section in, or with, or
specifically for use in, a User Product, and the conveying occurs as
part of a transaction in which the right of possession and use of the
User Product is transferred to the recipient in perpetuity or for a
fixed term (regardless of how the transaction is characterized), the
Corresponding Source conveyed under this section must be accompanied
by the Installation Information. But this requirement does not apply
if neither you nor any third party retains the ability to install
modified object code on the User Product (for example, the work has
been installed in ROM).
The requirement to provide Installation Information does not include a
requirement to continue to provide support service, warranty, or updates
for a work that has been modified or installed by the recipient, or for
the User Product in which it has been modified or installed. Access to a
network may be denied when the modification itself materially and
adversely affects the operation of the network or violates the rules and
protocols for communication across the network.
Corresponding Source conveyed, and Installation Information provided,
in accord with this section must be in a format that is publicly
documented (and with an implementation available to the public in
source code form), and must require no special password or key for
unpacking, reading or copying.
7. Additional Terms.
"Additional permissions" are terms that supplement the terms of this
License by making exceptions from one or more of its conditions.
Additional permissions that are applicable to the entire Program shall
be treated as though they were included in this License, to the extent
that they are valid under applicable law. If additional permissions
apply only to part of the Program, that part may be used separately
under those permissions, but the entire Program remains governed by
this License without regard to the additional permissions.
When you convey a copy of a covered work, you may at your option
remove any additional permissions from that copy, or from any part of
it. (Additional permissions may be written to require their own
removal in certain cases when you modify the work.) You may place
additional permissions on material, added by you to a covered work,
for which you have or can give appropriate copyright permission.
Notwithstanding any other provision of this License, for material you
add to a covered work, you may (if authorized by the copyright holders of
that material) supplement the terms of this License with terms:
a) Disclaiming warranty or limiting liability differently from the
terms of sections 15 and 16 of this License; or
b) Requiring preservation of specified reasonable legal notices or
author attributions in that material or in the Appropriate Legal
Notices displayed by works containing it; or
c) Prohibiting misrepresentation of the origin of that material, or
requiring that modified versions of such material be marked in
reasonable ways as different from the original version; or
d) Limiting the use for publicity purposes of names of licensors or
authors of the material; or
e) Declining to grant rights under trademark law for use of some
trade names, trademarks, or service marks; or
f) Requiring indemnification of licensors and authors of that
material by anyone who conveys the material (or modified versions of
it) with contractual assumptions of liability to the recipient, for
any liability that these contractual assumptions directly impose on
those licensors and authors.
All other non-permissive additional terms are considered "further
restrictions" within the meaning of section 10. If the Program as you
received it, or any part of it, contains a notice stating that it is
governed by this License along with a term that is a further
restriction, you may remove that term. If a license document contains
a further restriction but permits relicensing or conveying under this
License, you may add to a covered work material governed by the terms
of that license document, provided that the further restriction does
not survive such relicensing or conveying.
If you add terms to a covered work in accord with this section, you
must place, in the relevant source files, a statement of the
additional terms that apply to those files, or a notice indicating
where to find the applicable terms.
Additional terms, permissive or non-permissive, may be stated in the
form of a separately written license, or stated as exceptions;
the above requirements apply either way.
8. Termination.
You may not propagate or modify a covered work except as expressly
provided under this License. Any attempt otherwise to propagate or
modify it is void, and will automatically terminate your rights under
this License (including any patent licenses granted under the third
paragraph of section 11).
However, if you cease all violation of this License, then your
license from a particular copyright holder is reinstated (a)
provisionally, unless and until the copyright holder explicitly and
finally terminates your license, and (b) permanently, if the copyright
holder fails to notify you of the violation by some reasonable means
prior to 60 days after the cessation.
Moreover, your license from a particular copyright holder is
reinstated permanently if the copyright holder notifies you of the
violation by some reasonable means, this is the first time you have
received notice of violation of this License (for any work) from that
copyright holder, and you cure the violation prior to 30 days after
your receipt of the notice.
Termination of your rights under this section does not terminate the
licenses of parties who have received copies or rights from you under
this License. If your rights have been terminated and not permanently
reinstated, you do not qualify to receive new licenses for the same
material under section 10.
9. Acceptance Not Required for Having Copies.
You are not required to accept this License in order to receive or
run a copy of the Program. Ancillary propagation of a covered work
occurring solely as a consequence of using peer-to-peer transmission
to receive a copy likewise does not require acceptance. However,
nothing other than this License grants you permission to propagate or
modify any covered work. These actions infringe copyright if you do
not accept this License. Therefore, by modifying or propagating a
covered work, you indicate your acceptance of this License to do so.
10. Automatic Licensing of Downstream Recipients.
Each time you convey a covered work, the recipient automatically
receives a license from the original licensors, to run, modify and
propagate that work, subject to this License. You are not responsible
for enforcing compliance by third parties with this License.
An "entity transaction" is a transaction transferring control of an
organization, or substantially all assets of one, or subdividing an
organization, or merging organizations. If propagation of a covered
work results from an entity transaction, each party to that
transaction who receives a copy of the work also receives whatever
licenses to the work the party's predecessor in interest had or could
give under the previous paragraph, plus a right to possession of the
Corresponding Source of the work from the predecessor in interest, if
the predecessor has it or can get it with reasonable efforts.
You may not impose any further restrictions on the exercise of the
rights granted or affirmed under this License. For example, you may
not impose a license fee, royalty, or other charge for exercise of
rights granted under this License, and you may not initiate litigation
(including a cross-claim or counterclaim in a lawsuit) alleging that
any patent claim is infringed by making, using, selling, offering for
sale, or importing the Program or any portion of it.
11. Patents.
A "contributor" is a copyright holder who authorizes use under this
License of the Program or a work on which the Program is based. The
work thus licensed is called the contributor's "contributor version".
A contributor's "essential patent claims" are all patent claims
owned or controlled by the contributor, whether already acquired or
hereafter acquired, that would be infringed by some manner, permitted
by this License, of making, using, or selling its contributor version,
but do not include claims that would be infringed only as a
consequence of further modification of the contributor version. For
purposes of this definition, "control" includes the right to grant
patent sublicenses in a manner consistent with the requirements of
this License.
Each contributor grants you a non-exclusive, worldwide, royalty-free
patent license under the contributor's essential patent claims, to
make, use, sell, offer for sale, import and otherwise run, modify and
propagate the contents of its contributor version.
In the following three paragraphs, a "patent license" is any express
agreement or commitment, however denominated, not to enforce a patent
(such as an express permission to practice a patent or covenant not to
sue for patent infringement). To "grant" such a patent license to a
party means to make such an agreement or commitment not to enforce a
patent against the party.
If you convey a covered work, knowingly relying on a patent license,
and the Corresponding Source of the work is not available for anyone
to copy, free of charge and under the terms of this License, through a
publicly available network server or other readily accessible means,
then you must either (1) cause the Corresponding Source to be so
available, or (2) arrange to deprive yourself of the benefit of the
patent license for this particular work, or (3) arrange, in a manner
consistent with the requirements of this License, to extend the patent
license to downstream recipients. "Knowingly relying" means you have
actual knowledge that, but for the patent license, your conveying the
covered work in a country, or your recipient's use of the covered work
in a country, would infringe one or more identifiable patents in that
country that you have reason to believe are valid.
If, pursuant to or in connection with a single transaction or
arrangement, you convey, or propagate by procuring conveyance of, a
covered work, and grant a patent license to some of the parties
receiving the covered work authorizing them to use, propagate, modify
or convey a specific copy of the covered work, then the patent license
you grant is automatically extended to all recipients of the covered
work and works based on it.
A patent license is "discriminatory" if it does not include within
the scope of its coverage, prohibits the exercise of, or is
conditioned on the non-exercise of one or more of the rights that are
specifically granted under this License. You may not convey a covered
work if you are a party to an arrangement with a third party that is
in the business of distributing software, under which you make payment
to the third party based on the extent of your activity of conveying
the work, and under which the third party grants, to any of the
parties who would receive the covered work from you, a discriminatory
patent license (a) in connection with copies of the covered work
conveyed by you (or copies made from those copies), or (b) primarily
for and in connection with specific products or compilations that
contain the covered work, unless you entered into that arrangement,
or that patent license was granted, prior to 28 March 2007.
Nothing in this License shall be construed as excluding or limiting
any implied license or other defenses to infringement that may
otherwise be available to you under applicable patent law.
12. No Surrender of Others' Freedom.
If conditions are imposed on you (whether by court order, agreement or
otherwise) that contradict the conditions of this License, they do not
excuse you from the conditions of this License. If you cannot convey a
covered work so as to satisfy simultaneously your obligations under this
License and any other pertinent obligations, then as a consequence you may
not convey it at all. For example, if you agree to terms that obligate you
to collect a royalty for further conveying from those to whom you convey
the Program, the only way you could satisfy both those terms and this
License would be to refrain entirely from conveying the Program.
13. Remote Network Interaction; Use with the GNU General Public License.
Notwithstanding any other provision of this License, if you modify the
Program, your modified version must prominently offer all users
interacting with it remotely through a computer network (if your version
supports such interaction) an opportunity to receive the Corresponding
Source of your version by providing access to the Corresponding Source
from a network server at no charge, through some standard or customary
means of facilitating copying of software. This Corresponding Source
shall include the Corresponding Source for any work covered by version 3
of the GNU General Public License that is incorporated pursuant to the
following paragraph.
Notwithstanding any other provision of this License, you have
permission to link or combine any covered work with a work licensed
under version 3 of the GNU General Public License into a single
combined work, and to convey the resulting work. The terms of this
License will continue to apply to the part which is the covered work,
but the work with which it is combined will remain governed by version
3 of the GNU General Public License.
14. Revised Versions of this License.
The Free Software Foundation may publish revised and/or new versions of
the GNU Affero General Public License from time to time. Such new versions
will be similar in spirit to the present version, but may differ in detail to
address new problems or concerns.
Each version is given a distinguishing version number. If the
Program specifies that a certain numbered version of the GNU Affero General
Public License "or any later version" applies to it, you have the
option of following the terms and conditions either of that numbered
version or of any later version published by the Free Software
Foundation. If the Program does not specify a version number of the
GNU Affero General Public License, you may choose any version ever published
by the Free Software Foundation.
If the Program specifies that a proxy can decide which future
versions of the GNU Affero General Public License can be used, that proxy's
public statement of acceptance of a version permanently authorizes you
to choose that version for the Program.
Later license versions may give you additional or different
permissions. However, no additional obligations are imposed on any
author or copyright holder as a result of your choosing to follow a
later version.
15. Disclaimer of Warranty.
THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY
APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT
HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY
OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM
IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF
ALL NECESSARY SERVICING, REPAIR OR CORRECTION.
16. Limitation of Liability.
IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MODIFIES AND/OR CONVEYS
THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY
GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE
USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED TO LOSS OF
DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD
PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER PROGRAMS),
EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES.
17. Interpretation of Sections 15 and 16.
If the disclaimer of warranty and limitation of liability provided
above cannot be given local legal effect according to their terms,
reviewing courts shall apply local law that most closely approximates
an absolute waiver of all civil liability in connection with the
Program, unless a warranty or assumption of liability accompanies a
copy of the Program in return for a fee.
END OF TERMS AND CONDITIONS
How to Apply These Terms to Your New Programs
If you develop a new program, and you want it to be of the greatest
possible use to the public, the best way to achieve this is to make it
free software which everyone can redistribute and change under these terms.
To do so, attach the following notices to the program. It is safest
to attach them to the start of each source file to most effectively
state the exclusion of warranty; and each file should have at least
the "copyright" line and a pointer to where the full notice is found.
<one line to give the program's name and a brief idea of what it does.>
Copyright (C) <year> <name of author>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU Affero General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU Affero General Public License for more details.
You should have received a copy of the GNU Affero General Public License
along with this program. If not, see <https://www.gnu.org/licenses/>.
Also add information on how to contact you by electronic and paper mail.
If your software can interact with users remotely through a computer
network, you should also make sure that it provides a way for users to
get its source. For example, if your program is a web application, its
interface could display a "Source" link that leads users to an archive
of the code. There are many ways you could offer source, and different
solutions will be better for different programs; see section 13 for the
specific requirements.
You should also get your employer (if you work as a programmer) or school,
if any, to sign a "copyright disclaimer" for the program, if necessary.
For more information on this, and how to apply and follow the GNU AGPL, see
<https://www.gnu.org/licenses/>.

25
wavey-wind/README.org 100644
View File

@ -0,0 +1,25 @@
#+TITLE: wavey wind
OSC controlled visual (used with motion controller)
Also see https://git.kompot.si/g1smo/pifcamp-2021
* older prototypes
- https://kreten.si/spin/
- https://kreten.si/spin-color/
- https://kreten.si/spin-upgrade/
- https://kreten.si/spin-space/
- https://vis.kreten.si/ / https://vis.kreten.si/ctl
** history
The original animation, modularized with sliders, was first "exhibited" on [[https://radiostudent.si/kultura/humanistika/delo-in-tehnologija][october 6th 2017]] in [[http://atrog.org/prostori/modri-kot][Modri kot]], a beautiful space for performance that used to be on the side of the [[https://tovarna.org/][autonomous factory Rog]] in Ljubljana, which was evicted by force on january 19th 2021 by the municipality to pave way for future gentrification.
Special thanks to Zala and Lio for hosting me during early development and Tisa Neža for curating the first performance.
* bluetooth
1. Pair the device (named "wavey wind")
2. Find the MAC address
3. Add a serial port (change MAC accordingly)
`sudo rfcomm bind 0 98:CD:AC:63:78:9A`
4. Run the server with the bluetooth address
`node server.js /dev/rfcomm0`

107
wavey-wind/control.html 100644
View File

@ -0,0 +1,107 @@
<html >
<head>
<meta charset="UTF-8">
<title>wavey wind control</title>
<style type="text/css">
body {
margin: 0
}
.noUi-target {
width: 500px;
}
table tr td {
padding-top: 1rem;
}
</style>
<link href="node_modules/nouislider/distribute/nouislider.min.css" rel="stylesheet">
</head>
<body>
<table>
<tr>
<td>
vidni kot (FOV)
</td>
<td>
<div id="fovCtl"></div>
</td>
<td id="fovVal"></td>
</tr>
<tr>
<td>
visina objekta
</td>
<td>
<div id="visinaCtl"></div>
</td>
<td id="visinaVal"></td>
</tr>
<tr>
<td>
sirina objekta
</td>
<td>
<div id="sirinaCtl"></div>
</td>
<td id="sirinaVal"></td>
</tr>
<tr>
<td>
limit objektov
</td>
<td>
<div id="obj_limitCtl"></div>
</td>
<td id="obj_limitVal"></td>
</tr>
<tr>
<td>
rotacija X
</td>
<td>
<div id="rotxCtl"></div>
</td>
<td id="rotxVal"></td>
</tr>
<tr>
<td>
rotacija Y
</td>
<td>
<div id="rotyCtl"></div>
</td>
<td id="rotyVal"></td>
</tr>
<tr>
<td>
rotacija Z
</td>
<td>
<div id="rotzCtl"></div>
</td>
<td id="rotzVal"></td>
</tr>
<tr>
<td>
barva
</td>
<td>
<div id="barva_modCtl"></div>
</td>
<td id="barva_modVal"></td>
</tr>
<tr>
<td>
kamera
</td>
<td>
<div id="cam_rot_offsetCtl"></div>
</td>
<td id="cam_rot_offsetVal"></td>
</tr>
</table>
<script src="node_modules/nouislider/distribute/nouislider.min.js"></script>
<script src="control.js"></script>
</body>
</html>

163
wavey-wind/control.js 100644
View File

@ -0,0 +1,163 @@
// Interaktivnost
var socket = new WebSocket(location.origin.replace(/https?/, 'ws'));
function throttle (cb, limit) {
var w = false;
return function () {
if (!w) {
cb.apply(this, arguments);
w = true;
setTimeout(function () {
w = false;
}, limit);
}
}
}
inputi = {
"fov": {
val: 120,
min: 30,
max: 179
},
"sirina": {
val: 2,
min: 1,
max: 6,
step: 0.1
},
"visina": {
val: 2,
min: 1,
max: 6,
step: 0.1
},
"obj_limit": {
val: 1000,
min: 1,
max: 10000
},
"rotx": {
val: 0,
min: -0.1,
max: 0.1,
step: 0.001
},
"roty": {
val: 0,
min: -0.1,
max: 0.1,
step: 0.001
},
"rotz": {
val: 0,
min: -0.1,
max: 0.1,
step: 0.001
},
"barva_mod": {
val: 0.001,
min: 0.001,
max: 0.18,
step: 0.001
},
"cam_rot_offset": {
val: 0,
min: -10,
max: 10,
step: 0.1
}
};
Object.keys(inputi).map(function (name) {
var valEl = document.getElementById(name + "Val");
if (!valEl) { return; }
var ctlEl = document.getElementById(name + "Ctl");
var params = inputi[name];
var step = params.step;
if (!step) step = 1;
noUiSlider.create(ctlEl, {
start: [params.val],
range: {
min: [params.min],
max: [params.max]
},
step: step
});
ctlEl.noUiSlider.on('slide', throttle(function(val) {
console.log("update!");
var value = val[0];
valEl.innerHTML = value;
socket.send(['adjust', name, value].join(':'));
}, 125));
valEl.innerHTML = ctlEl.noUiSlider.get();
});
callbacks = {
fov: function(val) {
if (typeof camera === 'undefined') return;
FOV = val;
camera.fov = val;
camera.updateProjectionMatrix();
},
sirina: function(val) {
width = parseFloat(val);
},
visina: function (val) {
height = parseFloat(val);
},
rotx: function(val) {
rotacijaX = parseFloat(val);
},
roty: function(val) {
rotacijaY = parseFloat(val);
},
rotz: function(val) {
rotacijaZ = parseFloat(val);
},
posx: function(val) {
posX = parseFloat(val);
},
posy: function(val) {
posY = parseFloat(val);
},
posz: function(val) {
posZ = parseFloat(val);
},
obj_limit: function(val) {
obj_limit = parseInt(val);
},
default: function(name, val) {
window[name] = parseFloat(val);
}
};
socket.onmessage = function (msg) {
var parts = msg.data.split(":");
var cmd = parts[0];
switch (cmd) {
case 'adjust':
var name = parts[1];
var val = parts[2];
if (name in callbacks) {
callbacks[name].call(this, val);
} else {
callbacks["default"].call(this, name, val);
}
var valEl = document.getElementById(name + "Val");
if (!valEl) { return; }
var ctlEl = document.getElementById(name + "Ctl");
ctlEl.noUiSlider.set(val, false);
valEl.innerHTML = ctlEl.noUiSlider.get();
}
};

17
wavey-wind/index.html 100644
View File

@ -0,0 +1,17 @@
<html >
<head>
<meta charset="UTF-8">
<title>wavey wind</title>
<style type="text/css">
body { margin: 0; }
</style>
</head>
<body>
<div id="anim-container"></div>
<script src="node_modules/three/build/three.min.js"></script>
<script src="node_modules/osc/dist/osc-browser.js"></script>
<script src="anim.js"></script>
<script src="osctl.js"></script>
</body>
</html>

25
wavey-wind/osctl.js 100644
View File

@ -0,0 +1,25 @@
var oscPort = new osc.WebSocketPort({
url: location.origin.replace(/https?/, 'ws'),
metadata: true
});
oscPort.open();
oscPort.on("ready", function () {
console.log("OSC listening!")
// Example send
/*
oscPort.send({
address: "/carrier/frequency",
args: [
{
type: "f",
value: 440
}
]
});
*/
oscPort.on("message", function (msg) {
oscCallbacks[msg.address].forEach(cb => cb(msg.args))
});
});

21
wavey-wind/package.json 100644
View File

@ -0,0 +1,21 @@
{
"name": "cancerain",
"version": "0.3.0",
"description": "epilepsija",
"dependencies": {
"express": "^4.18.1",
"fs": "^0.0.1-security",
"http": "^0.0.1-security",
"nodemon": "^2.0.12",
"nouislider": "14.6.2",
"osc": "2.3",
"pm2": "^5.1.0",
"readline": "^1.3.0",
"serialport": "^10.4.0",
"three": "0.135.0",
"ws": "^7.5.9"
},
"scripts": {
"start": "npx nodemon server.js /dev/ttyUSB0"
}
}

255
wavey-wind/server.js 100644
View File

@ -0,0 +1,255 @@
const express = require('express')
const http = require('http')
const WebSocket = require('ws')
const osc = require('osc')
const readline = require('readline')
const fs = require('fs')
const port = 6676
// Vzemi iz argumenta
const tty = process.argv[2]
let eulerRotation = [0, 0, 0]
let baudrate = parseInt(process.argv[3])
if (!baudrate) {
baudrate = 115200
}
const include_files = [
'/anim.js',
'/control.js',
'/osctl.js',
'/test.js',
'/node_modules/three/build/three.min.js',
'/node_modules/nouislider/distribute/nouislider.min.js',
'/node_modules/nouislider/distribute/nouislider.min.css',
'/node_modules/osc/dist/osc-browser.js'
];
const app = express();
const server = http.Server(app);
const DEBUG = true
// Odprti serijski OSC link
let scon = null
function openSerial() {
console.log('opening ', tty, baudrate)
scon = new osc.SerialPort({
devicePath: tty,
bitrate: baudrate,
autoOpen: true,
useSLIP: true
})
scon.open()
scon.on('open', e => {
console.log('serial connection opened')
//console.log(scon)
})
scon.on('error', e => {
console.error('tty error', e)
//scon.close()
})
scon.on('close', e => {
console.warn('serial connection closed, restarting in 1 second')
})
// Arduino OSC gre v web
scon.on('message', msg => {
// Debug incoming osc
if (DEBUG) {
console.log('osc msg', msg)
}
sendAll(msg, null, null, osclients)
})
if (scon._closeCode) {
scon = null
console.log('restarting serial connection')
setTimeout(openSerial, 1000)
}
}
if (tty) {
openSerial(baudrate)
}
app.get('/', (req, res) => {
res.sendFile(__dirname + '/index.html');
});
app.get('/ctl', (req, res) => {
res.sendFile(__dirname + '/control.html');
});
app.get('/test', (req, res) => {
res.sendFile(__dirname + '/test.html');
});
let settings = {};
app.get('/settings', function(req, res) {
res.send(settings);
});
include_files.map(function(file) {
app.get(file, function(req, res){
res.sendFile(__dirname + file);
});
});
server.listen(port, () => console.log('listening on *:' + port))
// Websocket init
const wss = new WebSocket.Server({ server })
// Relay multicast to websockets
// @TODO still sends to supercollider? Do we need two sockets?
//var dgram = require('dgram');
//var sss = dgram.createSocket('udp4');
//sss.on('listening', () => {
// sss.addMembership('224.0.1.9');
//})
//sss.bind(57120);
const scudp = new osc.UDPPort({
//socket: sss
remotePort: 57121,
localPort: 57100
})
scudp.on('open', () => {
console.log("UDP to OSC open")
})
scudp.on('message', (msg) => {
console.log('got UDP msg', msg);
osclients.forEach( client => {
if (client) {
//console.log("sending", msg, info)
client.send(msg)
}
})
})
scudp.on('error', (e) => {
console.log('UDP OSC error!', e)
})
scudp.open()
function eulerFromQuaternion(quaternion) {
// Quaternion to matrix.
const w = quaternion[0], x = quaternion[1], y = quaternion[2], z = quaternion[3];
const x2 = x + x, y2 = y + y, z2 = z + z;
const xx = x * x2, xy = x * y2, xz = x * z2;
const yy = y * y2, yz = y * z2, zz = z * z2;
const wx = w * x2, wy = w * y2, wz = w * z2;
const matrix = [
1 - ( yy + zz ), xy + wz, xz - wy, 0,
xy - wz, 1 - ( xx + zz ), yz + wx, 0,
xz + wy, yz - wx, 1 - ( xx + yy ), 0,
0, 0, 0, 1
];
// Matrix to euler
function clamp( value, min, max ) {
return Math.max( min, Math.min( max, value ) );
}
const m11 = matrix[ 0 ], m12 = matrix[ 4 ], m13 = matrix[ 8 ];
const m21 = matrix[ 1 ], m22 = matrix[ 5 ], m23 = matrix[ 9 ];
const m31 = matrix[ 2 ], m32 = matrix[ 6 ], m33 = matrix[ 10 ];
var euler = [ 0, 0, 0 ];
euler[1] = Math.asin( clamp( m13, - 1, 1 ) );
if ( Math.abs( m13 ) < 0.9999999 ) {
euler[0] = Math.atan2( - m23, m33 );
euler[2] = Math.atan2( - m12, m11 );
} else {
euler[0] = Math.atan2( m32, m22 );
euler[2] = 0;
}
return euler;
}
let switchHeld = false
let switchValue = false
const sendAll = (msg, info, oscWS, osclients) => {
if (msg.address == '/keys') {
if (msg.args[0] == 1 && msg.args[1] == 1 ) {
eulerRotation = [0, 0, 0];
console.log("EULER ROTATION RESET");
}
}
// toggle button 2 state between 0 and 1
if (msg.address == '/keys') {
if (msg.args[1] == 1) {
if (switchHeld == false) {
switchValue = !switchValue
switchHeld = true
}
} else {
if (switchHeld) {
switchHeld = false
}
}
msg.args.push(switchValue ? 1 : 0)
}
// Convert quaternion diff to euler angle diff
if (msg.address == '/quaternionDiff') {
const euler = eulerFromQuaternion(msg.args, 'XYZ');
sendAll({
address: '/eulerDiff',
args: euler
}, info, oscWS, osclients)
eulerRotation[0] += euler[0]
eulerRotation[1] += euler[1]
eulerRotation[2] += euler[2]
sendAll({
address: '/euler',
args: eulerRotation
}, info, oscWS, osclients)
}
osclients.forEach( client => {
if (client && oscWS != client) {
// console.log("sending", msg, info)
client.send(msg)
}
})
if (scudp) {
console.log("SENDING UDP", msg)
scudp.send(msg)
}
}
const osclients = []
wss.on('connection', function (ws) {
console.log('new client connection')
const oscWS = new osc.WebSocketPort({
socket: ws,
metadata: false
});
// Vsi OSC sem grejo naprej na kliente OSC
oscWS.on('packet', (packet, info) => {
// Broadcast adjust msg
const [address, args] = packet
sendAll({ address, args}, info, oscWS, osclients)
})
oscWS.on('error', error => {
console.warn('Ignoring invalid OSC')
console.warn(error)
})
osclients.push(oscWS)
})