# Configuration You need to follow these steps to configure your RAPIDS deployment before you can extract behavioral features 0. Verify RAPIDS can process your [data streams](#supported-data-streams) 3. Create your [participants files](#participant-files) 4. Select what [time segments](#time-segments) you want to extract features on 2. Choose the [timezone of your study](#timezone-of-your-study) 5. Configure your [data streams](#data-stream-configuration) 6. Select what [sensors and features](#sensor-and-features-to-process) you want to process When you are done with this configuration, go to [executing RAPIDS](../execution). !!! hint Every time you see `config["KEY"]` or `[KEY]` in these docs we are referring to the corresponding key in the `config.yaml` file. --- ## Supported data streams A data stream refers to sensor data collected using a specific type of **device** with a specific **format** and stored in a specific **container**. For example, the `aware_mysql` data stream handles smartphone data (**device**) collected with the [AWARE Framework](https://awareframework.com/) (**format**) stored in a MySQL database (**container**). Check the table in [introduction to data streams](../../datastreams/data-streams-introduction) to know what data streams we support. If your data stream is supported, continue to the next configuration section, **you will use its label later in this guide** (e.g. `aware_mysql`). If your steam is not supported but you want to implement it, follow the tutorial to [add support for new data streams](../../datastreams/add-new-data-streams) and get in touch by email or in Slack if you have any questions. --- ## Participant files Participant files link together multiple devices (smartphones and wearables) to specific participants and identify them throughout RAPIDS. You can create these files manually or [automatically](#automatic-creation-of-participant-files). Participant files are stored in `data/external/participant_files/pxx.yaml` and follow a unified [structure](#structure-of-participants-files). ??? important "Remember to modify the `config.yaml` file with your PIDS" The list `PIDS` in `config.yaml` needs to have the participant file names of the people you want to process. For example, if you created `p01.yaml`, `p02.yaml` and `p03.yaml` files in `/data/external/participant_files/ `, then `PIDS` should be: ```yaml PIDS: [p01, p02, p03] ``` ??? info "Optional: Migrating participants files with the old format" If you were using the pre-release version of RAPIDS with participant files in plain text (as opposed to yaml), you can run the following command and your old files will be converted into yaml files stored in `data/external/participant_files/` ```bash python tools/update_format_participant_files.py ``` ### Structure of participants files ??? example "Example of the structure of a participant file" In this example, the participant used an android phone, an ios phone, a fitbit device, and a Empatica device throughout the study between Apr 23rd 2020 and Oct 28th 2020 If your participants didn't use a `[PHONE]`, `[FITBIT]` or `[EMPATICA]` device, it is not necessary to include that section in their participant file. In other words, you can analyse data from 1 or more devices per participant. ```yaml PHONE: DEVICE_IDS: [a748ee1a-1d0b-4ae9-9074-279a2b6ba524, dsadas-2324-fgsf-sdwr-gdfgs4rfsdf43] PLATFORMS: [android,ios] LABEL: test01 START_DATE: 2020-04-23 END_DATE: 2020-10-28 FITBIT: DEVICE_IDS: [fitbit1] LABEL: test01 START_DATE: 2020-04-23 END_DATE: 2020-10-28 EMPATICA: DEVICE_IDS: [empatica1] LABEL: test01 START_DATE: 2020-04-23 END_DATE: 2020-10-28 ``` === "[PHONE]" | Key                      | Description | |-------------------------------|--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | `[DEVICE_IDS]` | An array of the strings that uniquely identify each smartphone, you can have more than one for when participants changed phones in the middle of the study, in this case, data from all their devices will be joined and relabeled with the last 1 on this list. | | `[PLATFORMS]` | An array that specifies the OS of each smartphone in `[DEVICE_IDS]` , use a combination of `android` or `ios` (we support participants that changed platforms in the middle of your study!). You can set `[PLATFORMS]: [infer]` and RAPIDS will infer them automatically (each phone data stream infer this differently, e.g. `aware_mysql` uses the `aware_device` table). | | `[LABEL]` | A string that is used in reports and visualizations. | | `[START_DATE]` | A string with format `YYYY-MM-DD` or `YYYY-MM-DD HH:MM:SS`. Only data collected *after* this date time will be included in the analysis. By default, `YYYY-MM-DD` is interpreted as `YYYY-MM-DD 00:00:00`. | | `[END_DATE]` | A string with format `YYYY-MM-DD` or `YYYY-MM-DD HH:MM:SS`. Only data collected *before* this date time will be included in the analysis. By default, `YYYY-MM-DD` is interpreted as `YYYY-MM-DD 00:00:00`. | === "[FITBIT]" | Key                      | Description | |------------------|-----------------------------------------------------------------------------------------------------------| | `[DEVICE_IDS]` | An array of the strings that uniquely identify each Fitbit, you can have more than one in case the participant changed devices in the middle of the study, in this case, data from all devices will be joined and relabeled with the last `device_id` on this list. | | `[LABEL]` | A string that is used in reports and visualizations. | | `[START_DATE]` | A string with format `YYYY-MM-DD` or `YYYY-MM-DD HH:MM:SS`. Only data collected *after* this date time will be included in the analysis. By default, `YYYY-MM-DD` is interpreted as `YYYY-MM-DD 00:00:00`. | | `[END_DATE]` | A string with format `YYYY-MM-DD` or `YYYY-MM-DD HH:MM:SS`. Only data collected *before* this date time will be included in the analysis. By default, `YYYY-MM-DD` is interpreted as `YYYY-MM-DD 00:00:00`. | === "[EMPATICA]" | Key                      | Description | |------------------|-----------------------------------------------------------------------------------------------------------| | `[DEVICE_IDS]` | An array of the strings that uniquely identify each Empatica device used by this participant. Since the most common use case involves having multiple zip files from a single device for each person, set this device id to an arbitrary string (we usually use their `pid`) | | `[LABEL]` | A string that is used in reports and visualizations. | | `[START_DATE]` | A string with format `YYYY-MM-DD` or `YYYY-MM-DD HH:MM:SS`. Only data collected *after* this date time will be included in the analysis. By default, `YYYY-MM-DD` is interpreted as `YYYY-MM-DD 00:00:00`. | | `[END_DATE]` | A string with format `YYYY-MM-DD` or `YYYY-MM-DD HH:MM:SS`. Only data collected *before* this date time will be included in the analysis. By default, `YYYY-MM-DD` is interpreted as `YYYY-MM-DD 00:00:00`. | ### Automatic creation of participant files You can use a CSV file with a row per participant to automatically create participant files. ??? "`AWARE_DEVICE_TABLE` was deprecated" In previous versions of RAPIDS, you could create participant files automatically using the `aware_device` table. We deprecated this option but you can still achieve the same results if you export the output of the following SQL query as a CSV file and follow the instructions below: ```sql SELECT device_id, device_id as fitbit_id, CONCAT("p", _id) as empatica_id, CONCAT("p", _id) as pid, if(brand = "iPhone", "ios", "android") as platform, CONCAT("p", _id) as label, DATE_FORMAT(FROM_UNIXTIME((timestamp/1000)- 86400), "%Y-%m-%d") as start_date, CURRENT_DATE as end_date from aware_device order by _id; ``` In your `config.yaml`: 1. Set `CSV_FILE_PATH` to a CSV file path that complies with the specs described below 2. Set the devices (`PHONE`, `FITBIT`, `EMPATICA`) `[ADD]` flag to `TRUE` depending on what devices you used in your study. ```yaml CREATE_PARTICIPANT_FILES: CSV_FILE_PATH: "your_path/to_your.csv" PHONE_SECTION: ADD: TRUE # or FALSE IGNORED_DEVICE_IDS: [] FITBIT_SECTION: ADD: TRUE # or FALSE IGNORED_DEVICE_IDS: [] EMPATICA_SECTION: ADD: TRUE # or FALSE IGNORED_DEVICE_IDS: [] ``` Your CSV file (`[CSV_FILE_PATH]`) should have the following columns (headers) but the values within each column can be empty: | Column | Description | |------------------|-----------------------------------------------------------------------------------------------------------| | device_id | Phone device id. Separate multiple ids with `;` | | fitbit_id | Fitbit device id. Separate multiple ids with `;` | | empatica_id | Empatica device id. Since the most common use case involves having multiple zip files from a single device for each person, set this device id to an arbitrary string (we usually use their `pid`) | | pid | Unique identifiers with the format pXXX (your participant files will be named with this string) | | platform | Use `android`, `ios` or `infer` as explained above, separate values with `;` | | label | A human readable string that is used in reports and visualizations. | | start_date | A string with format `YYY-MM-DD` or `YYYY-MM-DD HH:MM:SS`. By default, `YYYY-MM-DD` is interpreted as `YYYY-MM-DD 00:00:00`. | | end_date | A string with format `YYY-MM-DD` or `YYYY-MM-DD HH:MM:SS`. By default, `YYYY-MM-DD` is interpreted as `YYYY-MM-DD 00:00:00`. | !!! example We added white spaces to this example to make it easy to read but you don't have to. ```csv device_id ,fitbit_id, empatica_id ,pid ,label ,platform ,start_date ,end_date a748ee1a-1d0b-4ae9-9074-279a2b6ba524;dsadas-2324-fgsf-sdwr-gdfgs4rfsdf43 ,fitbit1 , p01 ,p01 ,julio ,android;ios ,2020-01-01 ,2021-01-01 4c4cf7a1-0340-44bc-be0f-d5053bf7390c ,fitbit2 , p02 ,p02 ,meng ,ios ,2021-01-01 ,2022-01-01 ``` Then run ```bash snakemake -j1 create_participants_files ``` --- ## Time Segments Time segments (or epochs) are the time windows on which you want to extract behavioral features. For example, you might want to process data on every day, every morning, or only during weekends. RAPIDS offers three categories of time segments that are flexible enough to cover most use cases: **frequency** (short time windows every day), **periodic** (arbitrary time windows on any day), and **event** (arbitrary time windows around events of interest). See also our [examples](#segment-examples). === "Frequency Segments" These segments are computed on every day and all have the same duration (for example 30 minutes). Set the following keys in your `config.yaml` ```yaml TIME_SEGMENTS: &time_segments TYPE: FREQUENCY FILE: "data/external/your_frequency_segments.csv" INCLUDE_PAST_PERIODIC_SEGMENTS: FALSE ``` The file pointed by `[TIME_SEGMENTS][FILE]` should have the following format and can only have 1 row. | Column | Description | |--------|----------------------------------------------------------------------| | label | A string that is used as a prefix in the name of your time segments | | length | An integer representing the duration of your time segments in minutes | !!! example ```csv label,length thirtyminutes,30 ``` This configuration will compute 48 time segments for every day when any data from any participant was sensed. For example: ```csv start_time,length,label 00:00,30,thirtyminutes0000 00:30,30,thirtyminutes0001 01:00,30,thirtyminutes0002 01:30,30,thirtyminutes0003 ... ``` === "Periodic Segments" These segments can be computed every day, or on specific days of the week, month, quarter, and year. Their minimum duration is 1 minute but they can be as long as you want. Set the following keys in your `config.yaml`. ```yaml TIME_SEGMENTS: &time_segments TYPE: PERIODIC FILE: "data/external/your_periodic_segments.csv" INCLUDE_PAST_PERIODIC_SEGMENTS: FALSE # or TRUE ``` If `[INCLUDE_PAST_PERIODIC_SEGMENTS]` is set to `TRUE`, RAPIDS will consider instances of your segments back enough in the past as to include the first row of data of each participant. For example, if the first row of data from a participant happened on Saturday March 7th 2020 and the requested segment duration is 7 days starting on every Sunday, the first segment to be considered would start on Sunday March 1st if `[INCLUDE_PAST_PERIODIC_SEGMENTS]` is `TRUE` or on Sunday March 8th if `FALSE`. The file pointed by `[TIME_SEGMENTS][FILE]` should have the following format and can have multiple rows. | Column | Description | |---------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | label | A string that is used as a prefix in the name of your time segments. It has to be **unique** between rows | | start_time | A string with format `HH:MM:SS` representing the starting time of this segment on any day | | length | A string representing the length of this segment.It can have one or more of the following strings **`XXD XXH XXM XXS`** to represent days, hours, minutes and seconds. For example `7D 23H 59M 59S` | | repeats_on | One of the follow options `every_day`, `wday`, `qday`, `mday`, and `yday`. The last four represent a week, quarter, month and year day | | repeats_value | An integer complementing `repeats_on`. If you set `repeats_on` to `every_day` set this to `0`, otherwise `1-7` represent a `wday` starting from Mondays, `1-31` represent a `mday`, `1-91` represent a `qday`, and `1-366` represent a `yday` | !!! example ```csv label,start_time,length,repeats_on,repeats_value daily,00:00:00,23H 59M 59S,every_day,0 morning,06:00:00,5H 59M 59S,every_day,0 afternoon,12:00:00,5H 59M 59S,every_day,0 evening,18:00:00,5H 59M 59S,every_day,0 night,00:00:00,5H 59M 59S,every_day,0 ``` This configuration will create five segments instances (`daily`, `morning`, `afternoon`, `evening`, `night`) on any given day (`every_day` set to 0). The `daily` segment will start at midnight and will last `23:59:59`, the other four segments will start at 6am, 12pm, 6pm, and 12am respectively and last for `05:59:59`. === "Event segments" These segments can be computed before or after an event of interest (defined as any UNIX timestamp). Their minimum duration is 1 minute but they can be as long as you want. The start of each segment can be shifted backwards or forwards from the specified timestamp. Set the following keys in your `config.yaml`. ```yaml TIME_SEGMENTS: &time_segments TYPE: EVENT FILE: "data/external/your_event_segments.csv" INCLUDE_PAST_PERIODIC_SEGMENTS: FALSE # or TRUE ``` The file pointed by `[TIME_SEGMENTS][FILE]` should have the following format and can have multiple rows. | Column | Description | |---------------|---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------| | label | A string that is used as a prefix in the name of your time segments. If labels are unique, every segment is independent; if two or more segments have the same label, their data will be grouped when computing auxiliary data for features like the `most frequent contact` for calls (the most frequent contact will be computed across all these segments). There cannot be two *overlaping* event segments with the same label (RAPIDS will throw an error) | | event_timestamp | A UNIX timestamp that represents the moment an event of interest happened (clinical relapse, survey, readmission, etc.). The corresponding time segment will be computed around this moment using `length`, `shift`, and `shift_direction` | | length | A string representing the length of this segment. It can have one or more of the following keys `XXD XXH XXM XXS` to represent a number of days, hours, minutes, and seconds. For example `7D 23H 59M 59S` | | shift | A string representing the time shift from `event_timestamp`. It can have one or more of the following keys `XXD XXH XXM XXS` to represent a number of days, hours, minutes and seconds. For example `7D 23H 59M 59S`. Use this value to change the start of a segment with respect to its `event_timestamp`. For example, set this variable to `1H` to create a segment that starts 1 hour from an event of interest (`shift_direction` determines if it's before or after). | | shift_direction | An integer representing whether the `shift` is before (`-1`) or after (`1`) an `event_timestamp` | |device_id| The device id (smartphone or fitbit) to whom this segment belongs to. You have to create a line in this event segment file for each event of a participant that you want to analyse. If you have participants with multiple device ids you can choose any of them| !!! example ```csv label,event_timestamp,length,shift,shift_direction,device_id stress1,1587661220000,1H,5M,1,a748ee1a-1d0b-4ae9-9074-279a2b6ba524 stress2,1587747620000,4H,4H,-1,a748ee1a-1d0b-4ae9-9074-279a2b6ba524 stress3,1587906020000,3H,5M,1,a748ee1a-1d0b-4ae9-9074-279a2b6ba524 stress4,1584291600000,7H,4H,-1,a748ee1a-1d0b-4ae9-9074-279a2b6ba524 stress5,1588172420000,9H,5M,-1,a748ee1a-1d0b-4ae9-9074-279a2b6ba524 mood,1587661220000,1H,0,0,a748ee1a-1d0b-4ae9-9074-279a2b6ba524 mood,1587747620000,1D,0,0,a748ee1a-1d0b-4ae9-9074-279a2b6ba524 mood,1587906020000,7D,0,0,a748ee1a-1d0b-4ae9-9074-279a2b6ba524 ``` This example will create eight segments for a single participant (`a748ee1a...`), five independent `stressX` segments with various lengths (1,4,3,7, and 9 hours). Segments `stress1`, `stress3`, and `stress5` are shifted forwards by 5 minutes and `stress2` and `stress4` are shifted backwards by 4 hours (that is, if the `stress4` event happened on March 15th at 1pm EST (`1584291600000`), the time segment will start on that day at 9am and end at 4pm). The three `mood` segments are 1 hour, 1 day and 7 days long and have no shift. In addition, these `mood` segments are grouped together, meaning that although RAPIDS will compute features on each one of them, some necessary information to compute a few of such features will be extracted from all three segments, for example the phone contact that called a participant the most or the location clusters visited by a participant. ### Segment Examples === "5-minutes" Use the following `Frequency` segment file to create 288 (12 * 60 * 24) 5-minute segments starting from midnight of every day in your study ```csv label,length fiveminutes,5 ``` === "Daily" Use the following `Periodic` segment file to create daily segments starting from midnight of every day in your study ```csv label,start_time,length,repeats_on,repeats_value daily,00:00:00,23H 59M 59S,every_day,0 ``` === "Morning" Use the following `Periodic` segment file to create morning segments starting at 06:00:00 and ending at 11:59:59 of every day in your study ```csv label,start_time,length,repeats_on,repeats_value morning,06:00:00,5H 59M 59S,every_day,0 ``` === "Overnight" Use the following `Periodic` segment file to create overnight segments starting at 20:00:00 and ending at 07:59:59 (next day) of every day in your study ```csv label,start_time,length,repeats_on,repeats_value morning,20:00:00,11H 59M 59S,every_day,0 ``` === "Weekly" Use the following `Periodic` segment file to create **non-overlapping** weekly segments starting at midnight of every **Monday** in your study ```csv label,start_time,length,repeats_on,repeats_value weekly,00:00:00,6D 23H 59M 59S,wday,1 ``` Use the following `Periodic` segment file to create **overlapping** weekly segments starting at midnight of **every day** in your study ```csv label,start_time,length,repeats_on,repeats_value weekly,00:00:00,6D 23H 59M 59S,every_day,0 ``` === "Week-ends" Use the following `Periodic` segment file to create week-end segments starting at midnight of every **Saturday** in your study ```csv label,start_time,length,repeats_on,repeats_value weekend,00:00:00,1D 23H 59M 59S,wday,6 ``` === "Around surveys" Use the following `Event` segment file to create two 2-hour segments that start 1 hour before surveys answered by 3 participants ```csv label,event_timestamp,length,shift,shift_direction,device_id survey1,1587661220000,2H,1H,-1,a748ee1a-1d0b-4ae9-9074-279a2b6ba524 survey2,1587747620000,2H,1H,-1,a748ee1a-1d0b-4ae9-9074-279a2b6ba524 survey1,1587906020000,2H,1H,-1,rqtertsd-43ff-34fr-3eeg-efe4fergregr survey2,1584291600000,2H,1H,-1,rqtertsd-43ff-34fr-3eeg-efe4fergregr survey1,1588172420000,2H,1H,-1,klj34oi2-8frk-2343-21kk-324ljklewlr3 survey2,1584291600000,2H,1H,-1,klj34oi2-8frk-2343-21kk-324ljklewlr3 ``` --- ## Timezone of your study ### Single timezone If your study only happened in a single time zone or you want to ignore short trips of your participants to different time zones, select the appropriate code form this [list](https://en.wikipedia.org/wiki/List_of_tz_database_time_zones) and change the following config key. Double-check your timezone code pick, for example, US Eastern Time is `America/New_York` not `EST` ``` yaml TIMEZONE: TYPE: SINGLE TZCODE: America/New_York ``` ### Multiple timezones If your participants lived on different time zones or they travelled across time zones, and you know when participants' devices were in a specific time zone, RAPIDS can use this data to process your data streams with the correct date-time. You need to provide RAPIDS with the time zone data in a CSV file (`[TZCODES_FILE]`) in the format described below. ``` yaml TIMEZONE: TYPE: MULTIPLE SINGLE: TZCODE: America/New_York MULTIPLE: TZCODES_FILE: path_to/time_zones_csv.file IF_MISSING_TZCODE: STOP DEFAULT_TZCODE: America/New_York FITBIT: ALLOW_MULTIPLE_TZ_PER_DEVICE: False INFER_FROM_SMARTPHONE_TZ: False ``` Parameters for `[TIMEZONE]` |Parameter                                                            | Description | |--|--| |`[TYPE]`| Either `SINGLE` or `MULTIPLE` as explained above | |`[SINGLE][TZCODE]`| The time zone code from this [list](https://en.wikipedia.org/wiki/List_of_tz_database_time_zones) to be used across all devices | |`[MULTIPLE][TZCODES_FILE]`| A CSV file containing the time and code from this [list](https://en.wikipedia.org/wiki/List_of_tz_database_time_zones) visited by each device in the study. Multiple devices can be linked to the same person, read more in [Participants Files](#participant-files) | |`[MULTIPLE][IF_MISSING_TZCODE]`| When a device is missing from `[TZCODES_FILE]` Set this flag to `STOP` to stop RAPIDS execution and show an error, or to `USE_DEFAULT` to assign the time zone specified in `[DEFAULT_TZCODE]` to any such devices | |`[MULTIPLE][FITBIT][ALLOW_MULTIPLE_TZ_PER_DEVICE]`| You only need to care about this flag if one or more Fitbit devices sensed data in one or more time zones, and you want RAPIDS to take into account this in its feature computation. Read more in "How does RAPIDS handle Fitbit devices?" below. | |`[MULTIPLE][FITBIT][INFER_FROM_SMARTPHONE_TZ]`| You only need to care about this flag if one or more Fitbit devices sensed data in one or more time zones, and you want RAPIDS to take into account this in its feature computation. Read more in "How does RAPIDS handle Fitbit devices?" below. | ??? info "Format of `TZCODES_FILE`" `TZCODES_FILE` has three columns and a row for each time zone a device visited (a device can be a smartphone or wearable (Fitbit/Empatica)): |Column | Description | |--|--| |`device_id`|A string that uniquely identifies a smartphone or wearable| |`tzcode`| A string with the appropriate code from this [list](https://en.wikipedia.org/wiki/List_of_tz_database_time_zones) that represents the time zone where the `device` sensed data| |`timestamp`| A UNIX timestamp indicating when was the first time this `device_id` sensed data in `tzcode`| ```csv device_id, tzcode, timestamp 13dbc8a3-dae3-4834-823a-4bc96a7d459d, America/New_York, 1587500000000 13dbc8a3-dae3-4834-823a-4bc96a7d459d, America/Mexico_City, 1587600000000 13dbc8a3-dae3-4834-823a-4bc96a7d459d, America/Los_Angeles, 1587700000000 65sa66a5-2d2d-4524-946v-44ascbv4sad7, Europe/Amsterdam, 1587100000000 65sa66a5-2d2d-4524-946v-44ascbv4sad7, Europe/Berlin, 1587200000000 65sa66a5-2d2d-4524-946v-44ascbv4sad7, Europe/Amsterdam, 1587300000000 ``` Using this file, RAPDIS will create time zone intervals per device, for example for `13dbc8a3-dae3-4834-823a-4bc96a7d459d`: - Interval 1 `[1587500000000, 1587599999999]` for `America/New_York` - Interval 2 `[1587600000000, 1587699999999]` for `America/Mexico_City` - Interval 3 `[1587700000000, now]` for `America/Los_Angeles` Any sensor data row from a device will be assigned a timezone if it falls within that interval, for example: - A screen row sensed at `1587533333333` will be assigned to `America/New_York` because it falls within Interval 1 - A screen row sensed at `1587400000000` will be discarded because it was logged outside any interval. ??? note "Can I get the `TZCODES_FILE` from the time zone table collected automatically by the AWARE app?" Sure. You can put your timezone table (`timezone.csv`) collected by AWARE app under `data/external` folder and run: ```bash python tools/create_multi_timezones_file.py ``` The `TZCODES_FILE` will be saved as `data/external/multiple_timezones.csv` file. ??? note "What happens if participant X lives in Los Angeles but participant Y lives in Amsterdam and they both stayed there during my study?" Add a row per participant and set timestamp to `0`: ```csv device_id, tzcode, timestamp 13dbc8a3-dae3-4834-823a-4bc96a7d459d, America/Los_Angeles, 0 65sa66a5-2d2d-4524-946v-44ascbv4sad7, Europe/Amsterdam, 0 ``` ??? note "What happens if I forget to add a timezone for one or more devices?" It depends on `[IF_MISSING_TZCODE]`. If `[IF_MISSING_TZCODE]` is set to `STOP`, RAPIDS will stop its execution and show you an error message. If `[IF_MISSING_TZCODE]` is set to `USE_DEFAULT`, it will assign the time zone specified in `[DEFAULT_TZCODE]` to any devices with missing time zone information in `[TZCODES_FILE]`. This is helpful if only a few of your participants had multiple timezones and you don't want to specify the same time zone for the rest. ??? note "How does RAPIDS handle Fitbit devices?" Fitbit devices are not time zone aware and they always log data with a local date-time string. - When none of the Fitbit devices in your study changed time zones (e.g., `p01` was always in New York and `p02` was always in Amsterdam), you can set a single time zone per Fitbit device id along with a timestamp 0 (you can still assign multiple time zones to smartphone device ids) ```csv device_id, tzcode, timestamp fitbit123, America/New_York, 0 fitbit999, Europe/Amsterdam, 0 ``` - On the other hand, when at least one of your Fitbit devices changed time zones **AND** you want RAPIDS to take into account these changes, you need to set `[ALLOW_MULTIPLE_TZ_PER_DEVICE]` to `True`. **You have to manually allow this option because you need to be aware it can produce inaccurate features around the times when time zones changed**. This is because we cannot know exactly when the Fitbit device detected and processed the time zone change. If you want to `ALLOW_MULTIPLE_TZ_PER_DEVICE` you will need to add any time zone changes per device in the `TZCODES_FILE` as explained above. You could obtain this data by hand but if your participants also used a smartphone during your study, you can use their time zone logs. Recall that in RAPIDS every participant is represented with a participant file `pXX.yaml`, this file links together multiple devices and we will use it to know what smartphone time zone data should be applied to Fitbit devices. Thus set `INFER_FROM_SMARTPHONE_TZ` to `TRUE`, if you have included smartphone time zone data in your `TZCODE_FILE` and you want to make a participant's Fitbit data time zone aware with their respective smartphone data. --- ## Data Stream Configuration Modify the following keys in your `config.yaml` depending on the [data stream](../../datastreams/data-streams-introduction) you want to process. === "Phone" Set `[PHONE_DATA_STREAMS][TYPE]` to the smartphone data stream you want to process (e.g. `aware_mysql`) and configure its parameters (e.g. `[DATABASE_GROUP]`). Ignore the parameters of streams you are not using (e.g. `[FOLDER]` of `aware_csv`). ```yaml PHONE_DATA_STREAMS: USE: aware_mysql # AVAILABLE: aware_mysql: DATABASE_GROUP: MY_GROUP aware_csv: FOLDER: data/external/aware_csv ``` === "aware_mysql" | Key | Description | |---------------------|----------------------------------------------------------------------------------------------------------------------------| | `[DATABASE_GROUP]` | A database credentials group. Read the instructions below to set it up | --8<---- "docs/snippets/database.md" === "aware_csv" | Key | Description | |---------------------|----------------------------------------------------------------------------------------------------------------------------| | `[FOLDER]` | Folder where you have to place a CSV file **per** phone sensor. Each file has to contain all the data from every participant you want to process. | === "Fitbit" Set `[FITBIT_DATA_STREAMS][TYPE]` to the Fitbit data stream you want to process (e.g. `fitbitjson_mysql`) and configure its parameters (e.g. `[DATABASE_GROUP]`). Ignore the parameters of the other streams you are not using (e.g. `[FOLDER]` of `aware_csv`). !!! warning You will probably have to tell RAPIDS the name of the columns where you stored your Fitbit data. To do this, modify your chosen stream's `format.yaml` column mappings to match your raw data column names. ```yaml FITBIT_DATA_STREAMS: USE: fitbitjson_mysql # AVAILABLE: fitbitjson_mysql: DATABASE_GROUP: MY_GROUP SLEEP_SUMMARY_EPISODE_DAY_ANCHOR: False fitbitjson_csv: FOLDER: data/external/fitbit_csv SLEEP_SUMMARY_EPISODE_DAY_ANCHOR: False fitbitparsed_mysql: DATABASE_GROUP: MY_GROUP SLEEP_SUMMARY_EPISODE_DAY_ANCHOR: False fitbitparsed_csv: FOLDER: data/external/fitbit_csv SLEEP_SUMMARY_EPISODE_DAY_ANCHOR: False ``` === "fitbitjson_mysql" This data stream process Fitbit data inside a JSON column as obtained from the Fitbit API and stored in a MySQL database. Read more about its column mappings and mutations in [`fitbitjson_mysql`](../../datastreams/fitbitjson-mysql#format). | Key | Description | |---------------------|----------------------------------------------------------------------------------------------------------------------------| | `[DATABASE_GROUP]` | A database credentials group. Read the instructions below to set it up | | `[SLEEP_SUMMARY_EPISODE_DAY_ANCHOR]` | One of `start` or `end`. Summary sleep episodes are considered as events based on either the start timestamp or end timestamp (they will belong to the day where they start or end). | --8<---- "docs/snippets/database.md" === "fitbitjson_csv" This data stream process Fitbit data inside a JSON column as obtained from the Fitbit API and stored in a CSV file. Read more about its column mappings and mutations in [`fitbitjson_csv`](../../datastreams/fitbitjson-csv#format). | Key | Description | |---------------------|----------------------------------------------------------------------------------------------------------------------------| | `[FOLDER]` | Folder where you have to place a CSV file **per** Fitbit sensor. Each file has to contain all the data from every participant you want to process. | | `[SLEEP_SUMMARY_EPISODE_DAY_ANCHOR]` | One of `start` or `end`. Summary sleep episodes are considered as events based on either the start timestamp or end timestamp (they will belong to the day where they start or end). | === "fitbitparsed_mysql" This data stream process Fitbit data stored in multiple columns after being parsed from the JSON column returned by Fitbit API and stored in a MySQL database. Read more about its column mappings and mutations in [`fitbitparsed_mysql`](../../datastreams/fitbitparsed-mysql#format). | Key | Description | |---------------------|----------------------------------------------------------------------------------------------------------------------------| | `[DATABASE_GROUP]` | A database credentials group. Read the instructions below to set it up | | `[SLEEP_SUMMARY_EPISODE_DAY_ANCHOR]` | One of `start` or `end`. Summary sleep episodes are considered as events based on either the start timestamp or end timestamp (they will belong to the day where they start or end). | --8<---- "docs/snippets/database.md" === "fitbitparsed_csv" This data stream process Fitbit data stored in multiple columns (plain text) after being parsed from the JSON column returned by Fitbit API and stored in a CSV file. Read more about its column mappings and mutations in [`fitbitparsed_csv`](../../datastreams/fitbitparsed-csv#format). | Key | Description | |---------------------|----------------------------------------------------------------------------------------------------------------------------| | `[FOLDER]` | Folder where you have to place a CSV file **per** Fitbit sensor. Each file has to contain all the data from every participant you want to process. | | `[SLEEP_SUMMARY_EPISODE_DAY_ANCHOR]` | One of `start` or `end`. Summary sleep episodes are considered as events based on either the start timestamp or end timestamp (they will belong to the day where they start or end). | === "Empatica" Set `[USE]` to the Empatica data stream you want to use; see the table in [introduction to data streams](../../datastreams/data-streams-introduction). Configure any parameters as indicated below. ```yaml EMPATICA_DATA_STREAMS: USE: empatica_zip # AVAILABLE: empatica_zip: FOLDER: data/external/empatica ``` === "empatica_zip" | Key | Description | |---------------------|----------------------------------------------------------------------------------------------------------------------------| | `[FOLDER]` | The relative path to a folder containing one subfolder per participant. The name of a participant folder should match their device_id assigned in their participant file. Each participant folder can have one or more zip files with any name; in other words, the sensor data in those zip files belong to a single participant. The zip files are [automatically](https://support.empatica.com/hc/en-us/articles/201608896-Data-export-and-formatting-from-E4-connect-) generated by Empatica and have a CSV file per sensor (`ACC`, `HR`, `TEMP`, `EDA`, `BVP`, `TAGS`). All CSV files of the same type contained in one or more zip files are uncompressed, parsed, sorted by timestamp, and joined together.| ??? example "Example of an EMPATICA FOLDER" In the file tree below, we want to process three participants' data: `p01`, `p02`, and `p03`. `p01` has two zip files, `p02` has only one zip file, and `p03` has three zip files. Each zip has a CSV file per sensor that are joined together and processed by RAPIDS. ```bash data/ # this folder exists in the root RAPIDS folder external/ empatica/ p01/ file1.zip file2.zip p02/ aaaa.zip p03/ t1.zip t2.zip t3.zip ``` --- ## Sensor and Features to Process Finally, you need to modify the `config.yaml` section of the sensors you want to extract behavioral features from. All sensors follow the same naming nomenclature (`DEVICE_SENSOR`) and parameter structure which we explain in the [Behavioral Features Introduction](../../features/feature-introduction/). !!! done Head over to [Execution](../execution/) to learn how to execute RAPIDS.