A data stream refers to sensor data collected using a specific type of **device** with a specific **format** and stored in a specific **container**. For example, the `aware_mysql` data stream handles smartphone data (**device**) collected with the [AWARE Framework](https://awareframework.com/) (**format**) stored in a MySQL database (**container**).
Check the table in [introduction to data streams](../../datastreams/data-streams-introduction) to know what data streams we support. If your data stream is supported, continue to the next configuration section, **you will use its label later in this guide** (e.g. `aware_mysql`). If your steam is not supported but you want to implement it, follow this tutorial to [add support for new data streams](../../datastreams/add-new-data-streams) and get in touch by email or in Slack if you have any questions.
Participant files link together multiple devices (smartphones and wearables) to specific participants and identify them throughout RAPIDS. You can create these files manually or [automatically](#automatic-creation-of-participant-files). Participant files are stored in `data/external/participant_files/pxx.yaml` and follow a unified [structure](#structure-of-participants-files).
The list `PIDS` in `config.yaml` needs to have the participant file names of the people you want to process. For example, if you created `p01.yaml`, `p02.yaml` and `p03.yaml` files in `/data/external/participant_files/ `, then `PIDS` should be:
If you were using the pre-release version of RAPIDS with participant files in plain text (as opposed to yaml), you can run the following command and your old files will be converted into yaml files stored in `data/external/participant_files/`
In this example, the participant used an android phone, an ios phone, a fitbit device, and a Empatica device throughout the study between Apr 23rd 2020 and Oct 28th 2020
If your participants didn't use a `[PHONE]`, `[FITBIT]` or `[EMPATICA]` device, it is not necessary to include that section in their participant file. In other words, you can analyse data from 1 or more devices per participant.
| `[DEVICE_IDS]` | An array of the strings that uniquely identify each smartphone, you can have more than one for when participants changed phones in the middle of the study, in this case, data from all their devices will be joined and relabeled with the last 1 on this list. |
| `[PLATFORMS]` | An array that specifies the OS of each smartphone in `[DEVICE_IDS]` , use a combination of `android` or `ios` (we support participants that changed platforms in the middle of your study!). You can set `[PLATFORMS]: [infer]` and RAPIDS will infer them automatically (each phone data stream infer this differently, e.g. `aware_mysql` uses the `aware_device` table). |
| `[LABEL]` | A string that is used in reports and visualizations. |
| `[START_DATE]` | A string with format `YYYY-MM-DD` or `YYYY-MM-DD HH:MM:SS`. Only data collected *after* this date time will be included in the analysis. By default, `YYYY-MM-DD` is interpreted as `YYYY-MM-DD 00:00:00`. |
| `[END_DATE]` | A string with format `YYYY-MM-DD` or `YYYY-MM-DD HH:MM:SS`. Only data collected *before* this date time will be included in the analysis. By default, `YYYY-MM-DD` is interpreted as `YYYY-MM-DD 00:00:00`. |
| `[DEVICE_IDS]` | An array of the strings that uniquely identify each Fitbit, you can have more than one in case the participant changed devices in the middle of the study, in this case, data from all devices will be joined and relabeled with the last `device_id` on this list. |
| `[LABEL]` | A string that is used in reports and visualizations. |
| `[START_DATE]` | A string with format `YYYY-MM-DD` or `YYYY-MM-DD HH:MM:SS`. Only data collected *after* this date time will be included in the analysis. By default, `YYYY-MM-DD` is interpreted as `YYYY-MM-DD 00:00:00`. |
| `[END_DATE]` | A string with format `YYYY-MM-DD` or `YYYY-MM-DD HH:MM:SS`. Only data collected *before* this date time will be included in the analysis. By default, `YYYY-MM-DD` is interpreted as `YYYY-MM-DD 00:00:00`. |
| `[DEVICE_IDS]` | An array of the strings that uniquely identify each Empatica device used by this participant. Since the most common use case involves having multiple zip files from a single device for each person, set this device id to an arbitrary string (we usually use their `pid`) |
| `[LABEL]` | A string that is used in reports and visualizations. |
| `[START_DATE]` | A string with format `YYYY-MM-DD` or `YYYY-MM-DD HH:MM:SS`. Only data collected *after* this date time will be included in the analysis. By default, `YYYY-MM-DD` is interpreted as `YYYY-MM-DD 00:00:00`. |
| `[END_DATE]` | A string with format `YYYY-MM-DD` or `YYYY-MM-DD HH:MM:SS`. Only data collected *before* this date time will be included in the analysis. By default, `YYYY-MM-DD` is interpreted as `YYYY-MM-DD 00:00:00`. |
In previous versions of RAPIDS, you could create participant files automatically using the `aware_device` table. We deprecated this option but you can still achieve the same results if you export the output of the following SQL query as a CSV file and follow the instructions below:
SELECT device_id, device_id as fitbit_id, CONCAT("p", _id) as empatica_id, CONCAT("p", _id) as pid, if(brand = "iPhone", "ios", "android") as platform, CONCAT("p", _id) as label, DATE_FORMAT(FROM_UNIXTIME((timestamp/1000)- 86400), "%Y-%m-%d") as start_date, CURRENT_DATE as end_date from aware_device order by _id;
| empatica device id | The name of this column has to match `[EMPATICA_SECTION][DEVICE_ID_COLUMN]`. Since the most common use case involves having multiple zip files from a single device for each person, set this device id to an arbitrary string (we usually use their `pid`) |
Time segments (or epochs) are the time windows on which you want to extract behavioral features. For example, you might want to process data on every day, every morning, or only during weekends. RAPIDS offers three categories of time segments that are flexible enough to cover most use cases: **frequency** (short time windows every day), **periodic** (arbitrary time windows on any day), and **event** (arbitrary time windows around events of interest). See also our [examples](#segment-examples).
These segments can be computed every day, or on specific days of the week, month, quarter, and year. Their minimum duration is 1 minute but they can be as long as you want. Set the following keys in your `config.yaml`.
If `[INCLUDE_PAST_PERIODIC_SEGMENTS]` is set to `TRUE`, RAPIDS will consider instances of your segments back enough in the past as to include the first row of data of each participant. For example, if the first row of data from a participant happened on Saturday March 7th 2020 and the requested segment duration is 7 days starting on every Sunday, the first segment to be considered would start on Sunday March 1st if `[INCLUDE_PAST_PERIODIC_SEGMENTS]` is `TRUE` or on Sunday March 8th if `FALSE`.
| start_time | A string with format `HH:MM:SS` representing the starting time of this segment on any day |
| length | A string representing the length of this segment.It can have one or more of the following strings **`XXD XXH XXM XXS`** to represent days, hours, minutes and seconds. For example `7D 23H 59M 59S` |
| repeats_on | One of the follow options `every_day`, `wday`, `qday`, `mday`, and `yday`. The last four represent a week, quarter, month and year day |
| repeats_value | An integer complementing `repeats_on`. If you set `repeats_on` to `every_day` set this to `0`, otherwise `1-7` represent a `wday` starting from Mondays, `1-31` represent a `mday`, `1-91` represent a `qday`, and `1-366` represent a `yday` |
!!! example
```csv
label,start_time,length,repeats_on,repeats_value
daily,00:00:00,23H 59M 59S,every_day,0
morning,06:00:00,5H 59M 59S,every_day,0
afternoon,12:00:00,5H 59M 59S,every_day,0
evening,18:00:00,5H 59M 59S,every_day,0
night,00:00:00,5H 59M 59S,every_day,0
```
This configuration will create five segments instances (`daily`, `morning`, `afternoon`, `evening`, `night`) on any given day (`every_day` set to 0). The `daily` segment will start at midnight and will last `23:59:59`, the other four segments will start at 6am, 12pm, 6pm, and 12am respectively and last for `05:59:59`.
=== "Event segments"
These segments can be computed before or after an event of interest (defined as any UNIX timestamp). Their minimum duration is 1 minute but they can be as long as you want. The start of each segment can be shifted backwards or forwards from the specified timestamp. Set the following keys in your `config.yaml`.
| label | A string that is used as a prefix in the name of your time segments. If labels are unique, every segment is independent; if two or more segments have the same label, their data will be grouped when computing auxiliary data for features like the `most frequent contact` for calls (the most frequent contact will be computed across all these segments). There cannot be two *overlaping* event segments with the same label (RAPIDS will throw an error) |
| event_timestamp | A UNIX timestamp that represents the moment an event of interest happened (clinical relapse, survey, readmission, etc.). The corresponding time segment will be computed around this moment using `length`, `shift`, and `shift_direction` |
| length | A string representing the length of this segment. It can have one or more of the following keys `XXD XXH XXM XXS` to represent a number of days, hours, minutes, and seconds. For example `7D 23H 59M 59S` |
| shift | A string representing the time shift from `event_timestamp`. It can have one or more of the following keys `XXD XXH XXM XXS` to represent a number of days, hours, minutes and seconds. For example `7D 23H 59M 59S`. Use this value to change the start of a segment with respect to its `event_timestamp`. For example, set this variable to `1H` to create a segment that starts 1 hour from an event of interest (`shift_direction` determines if it's before or after). |
| shift_direction | An integer representing whether the `shift` is before (`-1`) or after (`1`) an `event_timestamp` |
|device_id| The device id (smartphone or fitbit) to whom this segment belongs to. You have to create a line in this event segment file for each event of a participant that you want to analyse. If you have participants with multiple device ids you can choose any of them|
This example will create eight segments for a single participant (`a748ee1a...`), five independent `stressX` segments with various lengths (1,4,3,7, and 9 hours). Segments `stress1`, `stress3`, and `stress5` are shifted forwards by 5 minutes and `stress2` and `stress4` are shifted backwards by 4 hours (that is, if the `stress4` event happened on March 15th at 1pm EST (`1584291600000`), the time segment will start on that day at 9am and end at 4pm).
The three `mood` segments are 1 hour, 1 day and 7 days long and have no shift. In addition, these `mood` segments are grouped together, meaning that although RAPIDS will compute features on each one of them, some necessary information to compute a few of such features will be extracted from all three segments, for example the phone contact that called a participant the most or the location clusters visited by a participant.
Use the following `Periodic` segment file to create overnight segments starting at 20:00:00 and ending at 07:59:59 (next day) of every day in your study
If your study only happened in a single time zone or you want to ignore short trips of your participants to different time zones, select the appropriate code form this [list](https://en.wikipedia.org/wiki/List_of_tz_database_time_zones) and change the following config key. Double-check your timezone code pick, for example, US Eastern Time is `America/New_York` not `EST`
``` yaml
TIMEZONE:
TYPE: SINGLE
TZCODE: America/New_York
```
### Multiple timezones
If your participants lived on different time zones or they travelled across time zones, and you know when participants' devices were in a specific time zone, RAPIDS can use this data to process your data streams with the correct date-time. You need to provide RAPIDS with the time zone data in a CSV file (`[TZCODES_FILE]`) in the format described below.
|`[TYPE]`| Either `SINGLE` or `MULTIPLE` as explained above |
|`[SINGLE][TZCODE]`| The time zone code from this [list](https://en.wikipedia.org/wiki/List_of_tz_database_time_zones) to be used across all devices |
|`[MULTIPLE][TZCODES_FILE]`| A CSV file containing the time and code from this [list](https://en.wikipedia.org/wiki/List_of_tz_database_time_zones) visited by each device in the study. Multiple devices can be linked to the same person, read more in [Participants Files](#participant-files) |
|`[MULTIPLE][IF_MISSING_TZCODE]`| When a device is missing from `[TZCODES_FILE]` Set this flag to `STOP` to stop RAPIDS execution and show an error, or to `USE_DEFAULT` to assign the time zone specified in `[DEFAULT_TZCODE]` to any such devices |
|`[MULTIPLE][FITBIT][ALLOW_MULTIPLE_TZ_PER_DEVICE]`| You only need to care about this flag if one or more Fitbit devices sensed data in one or more time zones, and you want RAPIDS to take into account this in its feature computation. Read more in "How does RAPIDS handle Fitbit devices?" below. |
|`[MULTIPLE][FITBIT][INFER_FROM_SMARTPHONE_TZ]`| You only need to care about this flag if one or more Fitbit devices sensed data in one or more time zones, and you want RAPIDS to take into account this in its feature computation. Read more in "How does RAPIDS handle Fitbit devices?" below. |
|`tzcode`| A string with the appropriate code from this [list](https://en.wikipedia.org/wiki/List_of_tz_database_time_zones) that represents the time zone where the `device` sensed data|
|`timestamp`| A UNIX timestamp indicating when was the first time this `device_id` sensed data in `tzcode`|
If `[IF_MISSING_TZCODE]` is set to `USE_DEFAULT`, it will assign the time zone specified in `[DEFAULT_TZCODE]` to any devices with missing time zone information in `[TZCODES_FILE]`. This is helpful if only a few of your participants had multiple timezones and you don't want to specify the same time zone for the rest.
- When none of the Fitbit devices in your study changed time zones (e.g., `p01` was always in New York and `p02` was always in Amsterdam), you can set a single time zone per Fitbit device id along with a timestamp 0 (you can still assign multiple time zones to smartphone device ids)
- On the other hand, when at least one of your Fitbit devices changed time zones **AND** you want RAPIDS to take into account these changes, you need to set `[ALLOW_MULTIPLE_TZ_PER_DEVICE]` to `True`. **You have to manually allow this option because you need to be aware it can produce inaccurate features around the times when time zones changed**. This is because we cannot know exactly when the Fitbit device detected and processed the time zone change.
If you want to `ALLOW_MULTIPLE_TZ_PER_DEVICE` you will need to add any time zone changes per device in the `TZCODES_FILE` as explained above. You could obtain this data by hand but if your participants also used a smartphone during your study, you can use their time zone logs. Recall that in RAPIDS every participant is represented with a participant file `pXX.yaml`, this file links together multiple devices and we will use it to know what smartphone time zone data should be applied to Fitbit devices. Thus set `INFER_FROM_SMARTPHONE_TZ` to `TRUE`, if you have included smartphone time zone data in your `TZCODE_FILE` and you want to make a participant's Fitbit data time zone aware with their respective smartphone data.
Set `[PHONE_DATA_STREAMS][TYPE]` to the smartphone data stream you want to process (e.g. `aware_mysql`) and configure its parameters (e.g. `[DATABASE_GROUP]`). Ignore the parameters of streams you are not using (e.g. `[FOLDER]` of `aware_csv`).
| `[FOLDER]` | Folder where you have to place a CSV file **per** phone sensor. Each file has to contain all the data from every participant you want to process. |
Set `[FITBIT_DATA_STREAMS][TYPE]` to the Fitbit data stream you want to process (e.g. `fitbitjson_mysql`) and configure its parameters (e.g. `[DATABASE_GROUP]`). Ignore the parameters of the other streams you are not using (e.g. `[FOLDER]` of `aware_csv`).
!!! warning
You will probably have to tell RAPIDS the name of the columns where you stored your Fitbit data. To do this, modify your chosen stream's `format.yaml` column mappings to match your raw data column names.
This data stream process Fitbit data inside a JSON column as obtained from the Fitbit API and stored in a MySQL database. Read more about its column mappings and mutations in [`fitbitjson_mysql`](../../datastreams/fitbitjson-mysql#format).
| `[SLEEP_SUMMARY_EPISODE_DAY_ANCHOR]` | One of `start` or `end`. Summary sleep episodes are considered as events based on either the start timestamp or end timestamp (they will belong to the day where they start or end). |
This data stream process Fitbit data inside a JSON column as obtained from the Fitbit API and stored in a CSV file. Read more about its column mappings and mutations in [`fitbitjson_csv`](../../datastreams/fitbitjson-csv#format).
| `[FOLDER]` | Folder where you have to place a CSV file **per** Fitbit sensor. Each file has to contain all the data from every participant you want to process. |
| `[SLEEP_SUMMARY_EPISODE_DAY_ANCHOR]` | One of `start` or `end`. Summary sleep episodes are considered as events based on either the start timestamp or end timestamp (they will belong to the day where they start or end). |
This data stream process Fitbit data stored in multiple columns after being parsed from the JSON column returned by Fitbit API and stored in a MySQL database. Read more about its column mappings and mutations in [`fitbitparsed_mysql`](../../datastreams/fitbitparsed-mysql#format).
| `[SLEEP_SUMMARY_EPISODE_DAY_ANCHOR]` | One of `start` or `end`. Summary sleep episodes are considered as events based on either the start timestamp or end timestamp (they will belong to the day where they start or end). |
This data stream process Fitbit data stored in multiple columns (plain text) after being parsed from the JSON column returned by Fitbit API and stored in a CSV file. Read more about its column mappings and mutations in [`fitbitparsed_csv`](../../datastreams/fitbitparsed-csv#format).
| `[FOLDER]` | Folder where you have to place a CSV file **per** Fitbit sensor. Each file has to contain all the data from every participant you want to process. |
| `[SLEEP_SUMMARY_EPISODE_DAY_ANCHOR]` | One of `start` or `end`. Summary sleep episodes are considered as events based on either the start timestamp or end timestamp (they will belong to the day where they start or end). |
Set `[USE]` to the Empatica data stream you want to use; see the table in [introduction to data streams](../../datastreams/data-streams-introduction). Configure any parameters as indicated below.
| `[FOLDER]` | The relative path to a folder containing one subfolder per participant. The name of a participant folder should match their device_id assigned in their participant file. Each participant folder can have one or more zip files with any name; in other words, the sensor data in those zip files belong to a single participant. The zip files are [automatically](https://support.empatica.com/hc/en-us/articles/201608896-Data-export-and-formatting-from-E4-connect-) generated by Empatica and have a CSV file per sensor (`ACC`, `HR`, `TEMP`, `EDA`, `BVP`, `TAGS`). All CSV files of the same type contained in one or more zip files are uncompressed, parsed, sorted by timestamp, and joined together.|
In the file tree below, we want to process three participants' data: `p01`, `p02`, and `p03`. `p01` has two zip files, `p02` has only one zip file, and `p03` has three zip files. Each zip has a CSV file per sensor that are joined together and processed by RAPIDS.
Finally, you need to modify the `config.yaml` section of the sensors you want to extract behavioral features from. All sensors follow the same naming nomenclature (`DEVICE_SENSOR`) and parameter structure which we explain in the [Behavioral Features Introduction](../../features/feature-introduction/).
