a461f607e7
* Add Kudox Full keyboard * Add keyboards/kudox_full SPDX identifier * Modify rule.mk of keyboards/kudox_full * Remove html code from README of keyboards/kudox_full * Modify readme of keyboards/kudox_full * rev1.c includes rev1.h - kudox-full/rev1 * Move to <keyboard>.c oled_task_user and eeconfig_init_user * Move post_config.h MOUSEKEY_* * Change BOOTMAGIC_ENABLE no kudox_full * Modify the obsoleted codes * Modify eeconfig_init_kb from eeconfig_init_user * Set none as default, but values * Add about the bootloader on kudox_full/readme * Modify the comments in keyboards/kudox_full/rules.mk |
||
|---|---|---|
| .. | ||
| keymaps | ||
| rev1 | ||
| config.h | ||
| kudox_full.c | ||
| kudox_full.h | ||
| post_config.h | ||
| readme.md | ||
| rules.mk | ||
readme.md
The Kudox Full keyboard
 |
 |
|---|---|
| front | angle |
- Keyboard Maintainer: Kumao Kobo
- Hardware Supported: Kudox Full PCB rev1.0 w/ Pro Micro
- Assembly guide: Kudox Full/README
Bootloader
Enter the bootloader in 3 ways:
- Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
- Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
- Keycode in layout: Press the key mapped to
RESETif it is available
Building Firmware
Make example for this keyboard (after setting up your build environment):
make kudox_full/rev1:default
Flashing example for this keyboard:
make kudox_full/rev1:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.