g1smo
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/macro3
History
Ryan f9aeea64c1
Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 		2023-02-08 18:41:46 +11:00
..
keymaps/default Macro3: rename LAYOUT to LAYOUT_ortho_2x4 (#18820) 2022-10-23 00:07:31 +01:00
config.h Debounce defines cleanup (#19742) 2023-02-03 19:19:58 +00:00
info.json Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00
macro3.c [Keyboard] Update encoder code for macro3 (#16005) 2022-03-07 20:09:54 -08:00
macro3.h Macro3: rename LAYOUT to LAYOUT_ortho_2x4 (#18820) 2022-10-23 00:07:31 +01:00
post_config.h
…
readme.md [Keyboard] Update encoder code for macro3 (#16005) 2022-03-07 20:09:54 -08:00
rules.mk Migrate `MCU` and `BOOTLOADER` to data-driven (#19529) 2023-02-08 18:41:46 +11:00

readme.md

Macro3

Macro3

Macro3 is a low-profile macro pad with dual encoder support designed by @davidphilipbarr.

Keyboard Info

Make example for this keyboard (after setting up your build environment):

make macro3:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the top right key and plug in the controller.
  • Keycode in layout: Press the key mapped to QK_BOOT if it is configured.
  • Physical reset pins: Briefly short the RST and GND pins on the microcontroller using tweezers, a paperclip, or any other conductive material.